Satellite U940 starts with error message after BIOS update

Similar Questions

• Re: My Satellite A500 starts with error message

  My computer laptop satellite A500, after this startup and windows open, a message from the Update Manager "error #-5, I wonder what that might be.
  My operating system is Windows 7, 32-bit 4 GB of Ram.

  Can anyone give me the solution for this error?

  Hi jun07,.

  Who Update Manager you mean exactly?
  I think that a screenshot would be very useful in this case.

  If you mean the update of Windows, you must check for Windows updates again and check if the updates will be installed.

• Satellite A110 starts with error message "PXE".

  I saw something on the internet that I usually look on the web address www.datemule.com I think, and I think without doing something new my laptop started to reboot and then pops up this message:

  INTEL UNDI, PXE - 2.1 (build 082)
  Copyright (C) 1997-2000 Intel Corporation

  For Realtek RTL8100E/8101E Fast Ethernet Network Adapter v1.02 (060510)
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM

  INTEL UNDI, PXE - 2.1 (build 082)
  Copyright (C) 1997-2000 Intel Corporation

  For Realtek RTL8100E/8101E Fast Ethernet Network Adapter v1.02 (060510)
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM

  what it means? Please help me to solve it!
  I look forward to your reply! Thank you!

  At first, I must say it's really strange that something like this happens so suddenly. It seems that your laptop can not find the HARD drive as a boot device.

  Start please your laptop, then press F2 to enter the BIOS settings. Check it please on the first page if the HARD drive is recognized and registered correctly. If Yes check it please boot option in the BIOS and don't forget HARD drive is set as the first boot device.

  Please post some info on the status of the BIOS and the HARD drive.

• I have an error message after an update, WindowsUpdate_0000737D""WindowsUpdate_dt000, can someone please help, my computer installs updates whenever I stop. "

  I have an error message after an update, WindowsUpdate_0000737D""WindowsUpdate_dt000, can someone please help, my computer installs updates whenever I stop. "

  @cinziac (who has not declared his complete version of Windows):

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Satellite L450D - 13 X - blue screen after BIOS update

  I have the blue screen after BIOS update. Satellite L450D - 13 X worked ok before that ideas?

  Is there contact information for Support TOSHIBA?

  Hey,.

  > Is there any TOSHIBA support contact information?
  No, becaue, must contact an authorized service provider. Guys can help on any hardware and software problems and can also order spare parts from Toshiba.

  Here is a list of aspic, where you can look closer:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

  Good luck! :)
  ?

• Satellite L300 starts with the message "JCQFX is compressed.

  I have a toshiba satellite l300 and worked very well until it turns off, when I turned on the computer laptop back it came with the message
  JCQFX is compressed
  Press the keys ctrl, alt and del to restart
  I did it but it keeps going back to the same thing, please can someone help me I am at my wits end and trying to monopolize my laptop girls thank you in advance x

  Hi the Welsh,

  Never heard about this error message then I asked Google on this subject and that therefore say: also no information :(
  Very strange

  So, step by step:
  Do you see the same behavior when you start Notepad (Windows) in safe mode?

• computer HP Pavilion laptop starts with error message disc 1 failed with code 301

  I have a HP Pavilion laptop dv6 - 6033cl running with Windows 7.  In the last days, it starts with the error message: "Test Drive: 1.

  SMART check failed

  Failure ID: RU3TRQ_5KK6PJ_MFH14J-60BE03

  Product ID: LH597UA #ABA

  HARD DRIVE 1 "

  When the computer is running in normal mode, bodyguard Windows sends messages saying that it detects recommeds and failure of disk 1, I perform the backup.

  This computer is more than 2 years old and is more under warranty.

  Can someone, please.

  Thank you very much

  Your hard drive is dying quickly and must be replaced. If you have not burnt the recovery discs again I'd get burn soon or you will have to order from HP. You will need to boot and install Windows when you put the new drive in.

  Burning discs of recovery HERE

  Example of hard drive HERE

• Defender fails to start with error 0x800106ba after application Vist SP 1

  I used Vista service pack 1 and now advocate does not start with a code of error 0x800106BA. I tried to uninstall it, but has not found how do for anywhere. I also tried to reinstall but the system says it is the first part of Vista. Any ideas?

  I used Vista service pack 1 and now advocate does not start with a code of error 0x800106BA. I tried to uninstall it, but has not found how do for anywhere. I also tried to reinstall but the system says it is the first part of Vista. Any ideas?

  You have already discovered, your AV closed your Defender Windiows because your AV has his own Defender, and having 2 defenders on the same machine will create conflicts.

  List of the AVs that will stop Windows Defender are...

  Microsoft Security Essentials
  Norton
  MacAfee
  AVG

  Canoe uninstall you or reinstall Windows Defender. It is part of the operating system. He lives and dies with the system.

  You do not get 0x800106B error code if you try to open Windows Defender, which is disabled by your AV.
  So, question:
  What did you want to do what it will take to open Windows Defender?

  If you try to enter the startup programs, you can do without going through Windows Defender.

  Start < in="" the="" search="" box,="" type="" msconfig=""> Startup tab > here is the list of startup programs...

  To disable - uncheck the box.
  To activate the checkbox....

  WARNING: Make sure that you know for sure to turn it off. If you are not sure, ask first.

• Satellite A100-TA7 hangs at POST after BIOS update

  Kind of tech swavy, I know that my chances are very low to solve this but this is.

  I decided to update the BIOS on my laptop Toshiba Satellite A100-TA7(PSAA8C-TA702C) to the latest version available (6.00).

  I did it because I've heard of people have better luck doing their job of FN keys on linux with the latest BIOS.
  The installation is completed normally (went through all the steps, wrote to all 21 blocks) without any error, but after the reboot, I noticed that it is now displayed at the Toshiba logo screen.

  The blue progress bar moves twice but got caught then about 1/3 of the way through.
  To see how bad the damage was, I Press esc at the beginning of the POST and saw that it gives me the right Version of the BIOS (6.00).

  He also told me that "no TPM or TPM has problem" and "2039 M RAM Passed system."
  It then displays the message "Press to enter SETUP" (which makes the message disappears, but otherwise doesn't do anything.

  If I press f2 during the Toshiba logo screen, it replaces the message at the bottom with "Please wait" and nothing happens even after an hour of waiting.
  (Which makes sense, because before the bar blue everything would load before entering the CMOS settings). The thing is that the BIOS is not really "freeze", it gets stuck just at a specific place (I know because I can press F2 even after an hour of waiting and the laptop meets it by displaying "Please Wait".)

  Someone at - it no more things I could try? Thank you

  PS. I tried clearing CMOS too. (Now the power button for 60 seconds without energy source<--- i'm="" not="" sure="" if="" this="" is="" how="" you="" do="" it="" on="" this="" laptop="" so="" any="" info="" would="" be="" nice).="" and="" i'm="" also="" 100%="" sure="" i="" chose="" the="" right="" bios="" update="" and="" followed="" every="" single="">

  Ola Amigo

  It of very long history and it does not sound good

  > I decided to update the BIOS on my laptop Toshiba Satellite A100-TA7 (PSAA8C-TA702C) to the latest version available (6.00).
  I wonder about your BIOS version that I know, that the laptop series is designed for the Canadian market. It s a Canadian series and the BIOS or drivers should be downloaded from the Canadian site of Toshiba!
  Bad BIOS could cause issues like this it describes your message above!

  > I did it because I've heard of people have better luck doing their job of FN keys on Linux with the latest BIOS.
  Keys FN Toshiba need driver Toshiba and it turns out that Toshiba driver pages don t offer the drivers for Linux distributions, so I put t believe in the story spread by any people.

  I don t want to write a long story, so I would cut this now;
  Is that something was happening during the BIOS update process.
  Either you have used a procedure to update the BIOS or wring wrong and so the laptop can not pass the MESSAGE

  You will need to contact the local ASP to solve this problem, maybe you're a lucky guy and the technician should Flash the ROM module but in the worst cases, your motherboard is damage and must be replaced. :(

  Good luck

• Satellite A135-S2356 won't boot after BIOS update

  I have Toshiba A135-S2356 and am having the same problem.
  Mine started to do after I was I had problems with only 2 of my usb ports work.

  I saw a topic on it and there was a link to update the system bios, http://laptopforums.toshiba.com/t5/General-Technology/My-Satellite-A135-S2356-is-having-USB-port-issues/m-p/17285, through this site.

  I clicked on the link and downloaded the update. Once I clicked on install the computer froze and I couldn't restart at all. The only way was for me to take the battery. Once I have the battery in I tried to return to power and that's when this current question has started to happen.

  If the update of bios fried my hard drive?

  When the BIOS update is interrupted for some reason any of the BIOS chip will be damaged and result starting laptop doesn t at all.
  I'm afraid of nothing that you can do everything alone. :(
  Please contact the nearest authorized maintainer and ask for help.

• Satellite A200-130 - had black screen after BIOS updated

  I have Satellite A200-130 I install a windows Vista OS with success and after that, I have saved all the driver I DOWNLOAD and put on a single folder... but then I accidentally open the configuration files of the BIOS that is "setup.exe" with the file "skae180a.rom".

  BOS update starts automatically and I can't cancel it because my keyboard doesn't work simply do not. Then the update fails. I tried to restart my laptop using the touchpad and after reboot I just get BLACK SCREEN and HD led flash just once and my CD/DVD drive is displayed for 5 seconds and nothing happens.

  Now my laptop remains the same... just 'black screen '.
  Can someone help me on this matter? I really need this laptop to be repaired.

  Hello
  I had exactly the same problem with my laptop A200, I spent so much time looking for a solution to this, I tried all the solution I got the net fourms but not at all, 100% bios chip be changed by ASP.
  UOP now I'm not sure that the A200 bios chip can be changed or I have to change all the Mo.
  I'll send it to ASP.

• Satellite L40 (PSL48E) - is not restart after BIOS update

  Hello

  My problem is that I have updated the BIOS and after that the machine does not restart. (Corrupt BIOS?)

  After that the BIOS updated (Satellite L40 PSL48E), reboot the machine and with the F2 key, I open the BIOS setup.
  I check the version of the BIOS (5.50) and complete the configuration of the BIOS. The machine must restart now...
  Not at all, the machine does not restart. No screen only the powerled lights.

  I can to fix it on my own as a BIOS reset?

  Thank you for the cooperation.

  It's strange because after that the updated BIOS update you can go into the BIOS.

  However, try to remove the battery and the AC adapter. Wait one hour and then put the battery back in and connect the AC adapter. Try again.

  If it doesn't work it is something wrong with the hardware or BIOS and must be checked by a technician for laptop.

• Satellite A200 (PSAFCA) does not work after BIOS update triying

  Hello

  I was hoping if someone could help me pls.

  I have a Toshiba Satellite A200 (PSAFCA).
  Recently, I tried the bios update and while I flashed the bios I forgot to plug the laptop into the current and the battery was flat at half way through the flashing.

  Thus the laptop now won't post when I turn on and all I get is a white screen.
  I was wondering if someone could pls advise me on how I can get the old bios back or even a method of flashing it if I put the bios back in so I can at least get a message to display on the screen.

  Any help that you provide would be greatly appreciated as I am at a loss.

  Thanking you in advance

  muzzy001

  > while I flashed the bios I forgot to plug the laptop into the current and the battery flat at half way through the flashing.

  Well buddy, the cell must always be connected to the mains during the execution of an update of the BIOS! This is very important!
  Now it looks like the update of BIOS didn't t run and finish correctly and the ROM module seems to be flashed incorrectly.

  Unfortunately, there is no other solution to communicate with ASP guys and ask for help! They should be able to help you.

  But note; in the worst cases, the ROM module is unfortunate and the motherboard needs to be replaced.

  Good luck

• Satellite M100 - no speakers sound thorugh after BIOS update

  Hi all

  I have satelite M100 PSMAAA-02006 with XP. I just updated the Bios on V3.0. Speakers do not work after update but the audio jack works so with headphones I can listen to but not through Laptop speakers and the keys to media on top of keyboard play, pause, stop, next, back, etc. homepage react too much.

  Someone knows the solution to this issue. Or is it possible to get the old BIOS? Although I not sure aboutt previous version.

  need quick help. Please answer as soon as possible.

  Thanks & best regards...

  Hi Julie,.

  I doubt that this was due the update of the BIOS. Is that what you have loaded default settings after updating the BIOS?
  Have you chosen the correct BIOS update?

  Normally you can hear the sound on the speakers laptop if you disconnect the headset. Make sure that the sound is not muted, you can do this with the FN + ESC key combination.

  About the multimedia keys, I would recommend reinstallation of Toshiba common Modules. You can find it on the Toshiba site.

• Satellite M100-165: screen dithering also after BIOS update

  I bought a Satellite M100-165 PSMA1E-2 days ago and I have the same problem as toshiba it described here:
  http://support.toshiba-tro.de/KB0/TSB6901K20002R01.htm

  I updated the bios to version 2.10 and the latest ATI drivers, but the promblem is still there.
  Is there anything I can do to solve this problem, because the dithering promblem is really annoying!

  P.S. The LCD Panel seems to be a SEC5643

  Hi guys

  If you have read the topic about this issue with the Satellite A100, you will see that many user were frustrated but right at the last update of the available BIOS. It cannot happen overnight and in my opinion, you must be patient and hope that the good BIOS update will be available shortly.