Satellite WLAN switch is on, but computer says THAT WLAN is DISABLED

I tried to access wireless internet in my public library. The switch for the without wire is turned on and the orange light comes on for, but then when I go to configfree to try to find the signal the labrary wireless, wireless photo is locked and when I click on it to solve the problem, the computer says I need to turn on the wireless switch. But the switch is ON ALREADY!

Help... What am I doing wrong?
Furthermore, I used wireless before and it worked very well... now when I turn it on, the icon of the computer jumps not high... in fact, that nothing is happening. Why?

Thanks to all who can help :)

Hello

When the WLAN switch is on and the light is ON please use FN + F8 key combination to see if the adapter is properly enabled.

Tags: Toshiba

Similar Questions

  • OfficeJet 4630: Says printer connected to the network, but computer says that it is not connected or idle

    I can't print to our hp officejet printer range 4630.  The printer says that it is connected to our home wireless network.  However, he said that it is inactive or not connected to the network on my mac.  The only way it will print sometimes is if I switch to a wireless network that is named the same as the printer.  AirPrint does not work.  We have a Linksys router.  Not sure if this is the problem or not.  I ran all kinds of diagnostic impressions on the printer and all say that it is connected.  I also tried to put the ip address into my web browser and it does not find the printer when it is connected to our home network.  Help, please!

    Thanks for trying my earlier recommendations. In my view, the problem you are experiencing may be with your wireless router. Normally, I would have you make sure that it is configured correctly, but you cannot access the built-in Web server.

    I want to try to set a static IP address, so we can try to get in the EWS. Please continue here: printer does not maintain the wireless connection

    A little luck? If you were able to set a static IP address, please try and access the built-in Web server. Follow the steps below:

    1. open EWS (use my earlier recommendations) printers

    2. go to the Network tab

    3. network protocols

    4. Select enable IPv4 ONLY

    Now with IPv4 enabled, you should be able to print wireless.

    If this isn't the case, you will need your router company to make sure that the multicast is enabled, Hello Protocol is enabled, mac filtering is disabled and ask them to check if there are updates the firmware for the router and the router's firewall check to make sure that it does not obstruct the communication

    The following ports are also used by your HP device and may need to be opened on your firewall configuration

    Incoming (UDP) ports are ports of destination on the computer while outgoing ports (TCP) are ports of destination on the HP device

    Incoming ports (UDP)

    137, 138, 161, 427

    Outbound ports (TCP)

    137, 139, 427, 9100, 9220, 9500

    The ports are used for the following functions:

    Print

    427, 137 161 UDP ports

    TCP port 9100

    Download of photo card

    137 138 427 UDP ports

    TCP 139

    Scanning

    427 UDP port

    TCP 9220, 9500

    Faxing

    427 UDP port

    TCP port 9220

    Installation of device HP

    427 UDP port

    Web Services

    80, 443, 5222 and 5223

    Any change? I appreciate your persistence!

  • Try to install iTunes but computer says that administrator has set policies to prevent this installation.

    original title: help please

    try to download itunes on my computer, but it says administrator has set policies to prevent this installation how do I get it to where I can change this and download itunes

    You can download other programs or is this just a problem with iTunes. ?

    I suggest that you do a right-click on the itunes file and select "Run as Administrator".
    This helps to get installed it?

    Answer please come back and let us know.

    Thank you

  • Firefox says click here to update to Shockwave, but who says that Shockwave is disabled if you are unable to click on this link. Please provide a fix.

    In Manager of modules entry page/Plugins for Shockwave Flash appears the line "Shockwave Flash is known to be vulnerable and need to be updated." It is followed by a link reading "Update Now". When I click on this link, Firefox thinks for a while and then displays a page that says (it is long enough, so it is a summary) versions of Shockwave Flash is disabled, then this page is displayed when you click on one of the links.

    Given that 'Update Now' does not work, please send me an executable file that will solve this problem. Firefox says it's version 30.0.

    Hi SF11blocked,
    I understand that you have tried to add Shockwave Flash for Firefox and are prompted to update, but when you're from the support site and submitted your question came a lot of text boxes and many were submitted. I also understand when you logged on to the Site from Adobe there are two problems:

    The first problem was that he had never had an activation in the drop-down list for this entry. (Perhaps it had been removed that plugin has been disabled?)
    The second problem was that I had deleted the entry Shockwave.

    If you have deleted the entry of: [subject: addons] http://helpx.adobe.com/flash-player/k.../enabling-flash-player-firefox.html then you uninstalled.
    Is it deleted when it has been disabled? He should not have been.

    I recommend to download and install it once again from the original download in your download folder. If she's gone, I would recommend starting over.

    Please post back with your results.

  • My computer says that it is connected to the internet but the HTTP 500 Internal server Err error rises. How I get working again?

    Why my internet has stopped working

    My computer says that it is connected to the internet but the HTTP 500 Internal server Err error rises. How I get working again? I have another computer in the House and that works very well.

    http://support.Microsoft.com/kb/321448

    In some cases, you must remove the cookie as well.
  • I got a message today saying my server has been hacked by TiGER-M@TE, but the computer says that there are no security threats

    I got a message today saying my server has been hacked by TiGER_M@TE , but the computer says that there are no security threats. I ran the page off and part he says * address email is removed from the privacy *. That's what worry and I'd do anything.  Thank you.

    I got a message today saying my server has been hacked by TiGER_M@TE, but the computer says that there are no security threats. I ran the page off and part says #* address email is removed from the privacy *. That's what worry and I'd do anything.  Thank you.

    1. the MOST important... do nothing the message asking you to do.

    2. connect with your e-mail server. Check the message. I suspect it's a hoax or, worse, a scam.

    3. post the whole message again, less your e-mail address.

  • I have a Dell Inspiron 531, I can't Panda titanium to download when I put in the disk drive. Why the habit of this work? I don't have an error message, but my computer says that there is a threat in my computer.

    I have a Dell Inspiron 531, I can't Panda titanium to download when I put in the disk drive. Why the habit of this work? I don't have an error message, but my computer says that there is a threat in my computer.

    http://www.pandasecurity.com/homeusers/support/

    Link above is Panda Support for installation issues, etc...

    http://support.pandasecurity.com/Forum/

    Forums of users Panda at the link above.

    They will help the Panda support above links.

    See you soon.

    Mick Murphy - Microsoft partner

  • I am trying to download adobe 10 but my computer says that it is blocked and dangerous to download. Can someone help me with this problem

    I am trying to download adobe 10 but my computer says that it is blocked and dangerous to download. Can someone help me with this problem

    Temporarily disable your Antivirus utility and try again.

  • I tried Windows 10 and after 10 days of hell, I asked them to uninstall.  But went with is my old Acrobat Reader.  I tried to use it, but it says that my browser plug is missing and that it cannot start because MSVCP120 is missing on the computer too.

    I tried Windows 10 and after 10 days of hell, I asked them to uninstall.  But went with is my old Acrobat Reader.  I tried to use it, but it says that my browser plug is missing and that it cannot start because MSVCP120 is missing on the computer too.  A friend told me that I have to uninstall and then re-install again.  I am a 71 years who does not know what to do.  Help

    Hi jimm13886845,

    Of course I'll help you get this problem is resolved.

    Run this cleanup tool to uninstall any old version of Adobe Reader Download Adobe Reader and Acrobat tool - Adobe Labs.

    Restart your computer and then installer you old version of Adobe Reader using this link Adobe - Adobe Acrobat Reader DC Distribution.

    Let me know if you encounter a problem, we will be happy to help you.

    Kind regards

    Nicos

  • Computer says that CS6 is installed, but can not find the program

    Computer says that CS6 is installed, but can not find the program

    Hi Chuck,

    It seems that you have a 32-bit operating system installed and Premiere Pro is not a 32-bit application. This seems to be a problem in the creative cloud desktop application.

    Thank you

    Regalo

  • I uninstalled Firefox and now you want to reinstall, but my computer says that it is already 100% downloaded.

    I couldn't use Firefox because it wouldn't load websites (it would just load for several minutes before giving up). I have reset and the problem persisted. As a last resort, I uninstalled Firefox to see if then put it back would solve the problem. Try reinstalling Firefox, after clicking on "Run", my computer says that Firefox is 100% downloaded, despite the fact that it has been uninstalled and is no longer on my computer. As a result, it is now impossible for me to launch Firefox. Any help?

    On the main download page, you get a small "stub" for Firefox installer that needs to connect to additional files. Firewalls or other components can sometimes this fails (even if 100% doesn't look like a failure...).

    Can you try to use a "full" Installer from this page - made scroll your preferred language:

    https://www.Mozilla.org/Firefox/all/

    Which works best?

  • The computer says that msn messenger is installed on my system, but I can't locate or open

    I had uninstalled an inadmissible msn Messenger... now I can't install version laterst since the computer says that msn messenger is already installed on the system pl tell me how to locate this msn Messenger which do not display on the programs installed and use it. Also tell me how to uninstall this inadmissible version and reinstall the latest version

    Use some removal tool/software-Revo uninstaller is a good option.

  • iOS 8.4.1. A newer version of the iPad (9.2) is available, but he says that this version of iTunes (12.2.2) is the current version. How to upgrade my iOS iPad 9.2?

    iOS 8.4.1. A newer version of the iPad (9.2) is available, but he says that this version of iTunes (12.2.2) is the current version. How to upgrade my iOS iPad 9.2?

    iOS and iTunes are two completely different things. It could be that your computer is not capable of running the version of iTunes need iOS en 9. Have you tried simply OTA update?

    https://www.Apple.com/support/ios9/

  • I tried to play some movies that I downloaded, but it says that I need the right codec to play.

    Original title: watch videos on media player

    I have an old computer for my son with XP on it. I tried to play some movies that I downloaded, but it says that I need the right codec to play. How can I fix that I can watch these videos?

    Hello

    1. what version of windows media player do you use?
    2. what type of media files are they?

    Check the following article to see if these files are supported by the Windows media player installed on the computer. If these files are not supported, then you will need to download the third-party codec to play.

    Information on the types of media files that supports Windows Media Player
    http://support.Microsoft.com/kb/316992

    THIRD WARNING:

    Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    For more information:
    How to Download Codecs automatically in Windows Media for Windows XP player
    http://support.Microsoft.com/kb/291818

  • I want to uninstall this program but it says that it could not be removed because of the error, it is the program (/ Applications/exPressit H.E. 2.1/UninstallerData/Uninstall exPressit H.E. 2.1.app)

    I want to uninstall this program but it says that it could not be removed because of the error, it is the program (/ Applications/exPressit H.E. 2.1/UninstallerData/Uninstall exPressit H.E. 2.1.app)

    Hello

    What is the exact error you receive everything trying to uninstall this program?

    Try to Uninstall the program in a clean boot state.

    From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

    Reference:

    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    1. click on start and then click Run.

    2. type msconfig and click OK.

    The System Configuration Utility dialog box appears.

    3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

    4. When prompted, click on restart to restart the computer.

Maybe you are looking for