Satellite Z30 - A - 12R BIOS password not recognized after update BIOS

Similar Questions

• 8.1 Windows password not recognized after updates

  After you have installed the Windows 8.1 updates a lot on my new computer, my password does not work more.  Given that I have not yet created a Microsoft account, I can't use this path to get it back. What should I do?

  I discovered what caused this problem.  I bought a laptop with the Swiss German keyboard.  However, I use the English version of the operating system and applications.  As one of the first steps after I activated my new laptop HP Envy, I downloaded and installed all the updates of security to Windows 8.1.  These updates changed PC settings for the keyboard, in particular, to the English keyboard.  In addition to the special characters for the German language, the letters Z and there are reversed on the Swiss German keyboard.  My password included the letter Z, which, after updates, was awarded to another key, namely that of Y.  When I typed Y instead of Z, the system unlocked and I could see then in detail how the settings have been changed.  This is unacceptable!  Also, my old laptop, ThinkPad T series, has a Swiss German keyboard and running the English version of Windows XP.  In six years, I have been using this system, I've never known such a problem!  I hope I won't have to change my settings back after each Windows 8.1 update!

• G570 bluetooth not recognized after update to 8.1 windows

  This is a very unusual problem, and I have not found one post on this anywhere!

  First of all my specifications specifications

  Lenovo G570 (reference number: 43345JU)

  i5 - 2410M

  8 GB RAM

  Qualcomm-Atheros AR9285 WLAN

  do not know the brand of bluetooth (for most broadcomm)

  Provided with Win7 Home premium x 64

  The Win7 it came with also had lenovo energy management through which I could toggle the WIFI and bluetooth on and outside. Given that I've never used the bluetooth, I turned it off via Power Mgmt.

  Interestingly, when I was running Win7 I also had this dual boot with Ubuntu. And if my Bluetooth has been disabled through the win7... EM bluetooth wouldn't be recognized in ubuntu and there was no way to turn it back on... I had to start again under win7 and turn it on via EM and start in ubuntu.

  Recently, I updated to Win8.1 but had not put on the bluetooth before doing so. In Win8.1 bluetooth device is not recognized everywhere... no PC settings (metro UI), not even in Device Manager. I tried to install the energy management to 8.1 from the support site, but he was extremely buggy and found no option to activate bluetooth. The old EM has not installed correctly in comaptibilty mode.

  In ubuntu now (dual boot with win8.1) its still the same. Bluetooth not regonised just like before.

  I can't go back to win7 now. There is no correct EM to win8.1. There is no option in the BIOS about bluetooth.

  How can I activate the bluetooth adapter? ANY help is appreciated...

  Hi neokenchi,

  Please help out me. Yes, I had tried to install win7 EM but trotted in compatibility problems. But now started digging through the forums and found a link to EM that works on win 8 and 8.1 of victory. It has even installed the power controller driver virtual lenovo APCI.

  http://driverdl.Lenovo.com.CN/Lenovo/DriverFilesUploadFloder/36900/WIN8_14.EnergyManagement.exe

• Pencil of Apple not recognized after update 9.21

  Hi guys

  9.21 yesterday on my ipad pro upgrade and now its telling me my apple pencil is not certified and not recognizable. It won't register for matching and will not charge because it is not recognized. Can someone tell how can I solve this please. I bought the ipad pro and apple prncil directly from apple.com when it was first released.

  Hoping someone can help

  Try a hard reset of your iPad by simultaneously pressing buttons Home and sleep/wake button until your iPad goes to the dark and restarts with the Apple logo, then release the buttons.

  Good luck!

• Satellite Pro S500 - 11 c - password not recognized

  I bought a S500 - 11 c in July. I have set up with a startup password and it seemed ok. Turn it on, enter the password and off you go.
  I've written the password down "just in case".

  Due to circumstances the laptop then unused for about two months. Now, he does not recognize the password and does not start.

  What can I do to remedy this?

  Hey Anchorage,

  To be a little more detail, what password you mean exactly?

  There are several types of BIOS passwords:
  HARD drive password-
  -The BIOS user password
  -The BIOS supervisor password
  -Windows password

  So what password say you exactly?

• Satellite Pro 2100: card network wireless not recognized after upgrade

  I have a Satellite Pro 2100 ad I used successfully a PCIMCIA 802. 11b card wifi for two years.

  Studying the manual, I discovered that the notebook is "wifi ready" (it has a wifi switch, a switch wifi of Alt - F8, and a section of the manual).

  I opened a Bay and found out a mini-pci slot. That's why I bought an Intel 2200 BG wireless adapter and I put it inside, which connects the sons of two antennas, located in the Bay. Finally, I was ready to son mask 11 and 13, as suggested in many forums. But when I put the card inside, unknown electrically. It seems that the mini-pci slot must be Electric.toutes impossible. My Bios is not impossible, but it.

  In another Bay close to the mini-pci card, I discovered an empty shell for a chip. Is this an impossible chip?

  Hello

  As far as I know that this unit is about 4 years old and at that time the unit is tested with the wireless network card with the PA3212U-1MPC part number. This map has been tested, is also compatible and can be used.

  I put t know what is going on exactly in your case, but new material should be recognized and the driver must be installed. I put t know what you mean exactly, but can you please explain exactly the situation?

  The card is correctly recognized and installed in the Device Manager?
  You can use FN + F8 key combination to activate the wireless card?

• Satellite L735 - wireless network card is not recognized after installing OS own

  Dear Sir.

  I have the computer laptop satellite L735-M14X part #: PSK0CE-04X01RAR, SERIAL No.: YB321818W
  My laptop was windows Home premium 64-bit Arabic and very slow and I wanted ultimate English so I did a format and installed win 7 ultimate 64-bit, and after I installed all the drivers shown in the attached picture 4

  but wifi still doesn't work do not for a wireless internet connection! (I updated the bios from 1.8 to 2.2 and installed the package of value added and activated the wireless but not active)

  so I noticed that there are 2 drivers to lack as in the attached photo 1 & 3 picture and I have not found the required software for them.

  also when I was installing the driver 'widipl-20110323155916', is a problem then please check the image2

  Please find a good solution without recovery!

  Waiting for your help earlier and support

  Photo 1
  [http://forums.toshiba.com/tshb/attachments/tshb/brd_network/14337/1/1.png]

  Photo 2
  http://forums.Toshiba.com/tshb/attachments/tshb/brd_network/14337/2/2.PNG

  Photo 3
  http://forums.Toshiba.com/tshb/attachments/tshb/brd_network/14337/3/3.PNG

  Photo 4
  http://forums.Toshiba.com/tshb/attachments/tshb/brd_network/14337/4/4.PNG

  According to the specifications of the laptop your laptop doesn't have Intel WLAN card. It has Atheros WLAN card inside, please try to install the driver gate Atheros WLAN Toshiba - http://aps2.toshiba-tro.de/wlan/

  Please post comments.

• Re: Satellite L300D-11V-CD/DVD drive not recognized after upgrade to Windows 7

  Hi, I have a Satellite L300D-11V model pslc0e and have upgraded to 32 bit Windows7 ultimate. I downloaded all the necessary drivers on the toshiba site, but he acknowledges that he has a cd/dvd drive!

  Can I put any disk in, but it will not load up or even acknowledge that the car exists!

  Help, please!

  Thank you

  James

  Please, read here:

  http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

  This is for Vista but works for win 7 too. I checked it myself before.

• Satellite S50-B-15F - Touchpad does not work after update of Windows 10

  Hello

  Yesterday, that I've updated my S50 B 15F Satellite with Windows 10. Now the Touchpad no longer works. Tried enabling in the settings. This works except for the left and right buttons. I reinstall the software momentum but no change. Any ideas how to solve this problem?

  Thank you!

  Joram

  Here another thread where the issue could be resolved:
  https://Forum.Toshiba.EU/showthread...-to-Windows-10

• WRT160NL Usb storage not recognized after update firmware

  Hello.
  I use a power running alternative disc into my router for a long time, until I've found the new firmware (Ver.1.0.04 Build 2), but after the upgrade of the storage was no longer working. (I don't remember the firmware version he had)

  In the storage, in the page Setup tab, I can see the drive, I can create shares, but these are not present in the windows network. (I use windows 7)

  the disc has been tested using FAT32 and NTFS (232.8 GB)

  you have a solution for this problem? or should I return to the firmware version, he had (that I don't remember)...
  y at - it another version to switch to?

  Thanks for your help...

  Yes! This is the solution!

  Thank you

• Windows login password not recognized

  Original title: sign the password not recognized.  Similar problems are are produced.

  Already happened.  Tried to sing in password rejected.  It's the same thing and I him have not changed for a long time.

  Log on to another administrator user account and change your password to something that you will remember. Then search for malicious software because these things do not happen by themselves. Or think about who else has access to your computer and may have changed your password without your knowledge.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If you have another administrative user (see Configuring user recommended at the end of this post) and then you have to activate the built-in Administrator, and then change the password of your user account. All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have a Windows 7 DVD installation (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  NET user [insert here the name of your user account] [insert the new password of user as 1234 here] [press Enter]

  [Note: do not enter the brackets!]

  Remove the installation DVD and restart the computer. Now, you will be able to connect to your user account by using the password that you set; for example, 1234.

  If you do not have a Windows 7 installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair the system Windows 7 (not a system recovery!) in the menu diagnosis. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable DVD of Windows 7 repair of the file on this link:

  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent asmuTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. If you create the bootable DVD in an older operating system (XP, Vista), you will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data. Windows 7 can burn the .isos natively.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Windows 7:

  You absolutely don't want to have only one user account. Like XP, Vista and all the other modern operating systems, Windows 7 is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrator privileges in Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  MS - MVP - Elephant Boy computers - don't panic!

• Pavilion p6210t: CD/DVD HP Pavilion p6210t drive is not recognized after upgrade Windows 10

  HP Pavilion p6210t DVD/CD drive is not recognized after the upgrade to Windows.  DVD/CD material is: LightScribe16XmaxDVD + / R/RWSuperMultidrv.  I can't find an updated driver for this device, download and install. Thanks for any advice you can provide.

  Thank you for your response.  I can't find somewhere - it now despite a lot of research - I read on a very simple solution to this problem which is (was) affecting hundreds of users HP.  In essence, the solution said that the DVD drive has in fact been recognized [as evidenced by his appearance in the BIOS] but has been "identified" and how to fix this problem was to go into the DEVICE MANAGER and delete the incorrect identification reference - then restart the computer and Windows 10 would correctly identify the DVD player and correctly in the DEVICE MANAGER list.  I decided to try this simple fix before one of the more complex solutions that were offered.  The simple solutioon worked! 

• 11-n001tu x 360 PC Pavilion: 11-n001tu x 360 HP Pavilion touchscreen does not work after updating drivers

  Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.

  In addition, the HID-Compliant touch screen driver is missing.

  Please help me solve this problem, thank you.

  Hi there @BryanHech,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .

  How you did update the drivers?

  You use Windows Update?

  Have you checked to see if the driver has been disabled?

  Have you tried to run the Troubleshooter in Windows?

  Have you tried to do a hard reset?

  Have you tried a update the BIOS and graphics driver?

  Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?

  Have you tried to Configure the display key?

  Have you tried to activate the driver in touch screen device manager?

  Please follow these steps to see if you can activate the touch screen:

  • Open the Device Manager
  • Find "Human Interface Devices"
  • Expand "Human Interface Devices"
  • Right-click on "touch screen HD compliant."
  • Click 'Activate' (if available)
  • Restart your laptop.

  If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.

  To use the system restore in Windows:

  • Go to the Search
  • Type of Control Panel
  • Click on Control Panel
  • Click System
  • Click on the System Protection
  • Click the System Protection tab
  • Click on System Restore
  • Click Next
  • Choose a restore point
  • Click Next
  • A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
  • Click Yes to confirm

  When the system restore is complete, you'll be up a pop that says that it has been completed.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• Certain things does not work after update MacOS Sierra on my Macbook Air 13 "Late 2010

  Drag between apps full screen, Mission Control and expose App are not working after update MacOS Sierra on my Macbook Air 13 '' end 2010. The problem because my macbook are not compatible with the current Mac OS or something else?

  Go to System Preferences > Trackpad and turn off and then on the ' shot between apps full screen» It should then work.

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.