Satellite Z30: Win Pro 8 - How to get the display wireless work

Similar Questions

• Satellite Pro A100 - how to get the Wlan connection works

  Help!

  I'm a total beginner, and my problem is I can get a connection without wire only when I'm really close to my BT hub.
  My son has a laptop and gets a good connection anywhere in the House and even outside.

  He thinks I have a dodgy wireless adapter, this could be the problem?
  Can I fix it myself?

  Maybe download a new driver?
  Any suggestions would be much apreciated.

  TOSHIBA SATELLITE PRO A100

  Hello

  Your ad is not really useful.
  I mean that there is no detail about your problem
  You should first check if the laptop supports the wireless network card.
  This can be done in the Device Manager.

  Usually the WLan card must appear in Manager devices-> network adapters.
  If it s are not it is that the WLan card is not built in or the driver WLan is not installed. If the WLan driver is not installed then you should see yellow exclamation (or unknown device).

  But if the wireless network adapter is listed correctly then you should check if the WLan notebooks have been enabled. In order to activate the WLan you have to press FN + F8 and you put the switch on IT until the small LED flash.

  Finally, to configure the WiFi connection (right name WLan, encryption settings, etc...)

• Re: How to get the Tempo to work properly?

  Hello

  I have problems with the service of Tempo.

  I don't get updates via this application (all the settings of this application are accurate, i.e. "full control"). I know this because there are updates available online to my laptop via the pilot site of toshiba.

  When I installed first Tempo, updates for about a month, I received, and then all of a sudden, no update came through. My firewall is blocking either of this application.

  I tried to reinstall the application, but no change in the situation.

  Does anyone know if ALL updates are available via the website of driver toshiba out tempo? Because, in the month that this service worked, I got an update of the bios, but I recently saw a bios update online and Tempo has not always reports that it is available.

  Any ideas on how to get the Tempo to work properly?

  Thank you.

  I saw in your other thread you have installed SP1 on your Vista laptop.
  There may be some compatibility problems between SP1 and Tempo

  And Yes, as far as I know Tempo bring all available updates!

• How to get the webcam to work?

  Hello

  As I don't have a book of instruction for this computer, can someone tell me how to get the webcam to work please?
  It is supposed to be something that appears on the side of the screen, but I left the sit of mouse here for centuries on all sides and nothing. Please help me.

  Kit_e

  Hello

  I agree with the user above. The user manual you can find on your computer because it s preinstalled.

  The webcam, you can use with programs like Skype communication. You can make a video call with friends and they see the webcam image. ;)

• Hello everyone, I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro, Win10/Bootcamp. Is anyone know the procedure to get the display to work with Bootcamp Windows 10?  I have connected screen but no picture. TY

  Hi all

  I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro Win10/Boot Camp running. Is anyone know the procedure to get the display to work with Bootcamp/Windows 10? Is there a setting in the training Camp that must be turned on to make it work? I have connected screen but could not get a desktop display.  Any help would be really appreciated! TY

  The monitor should have a TB and adapter power connector. The monitor works on both OSX. ? If so, shut down of windows, connect monitor and start Windows. Your TB 2012 monitor is not plug-and-play with Windows.

  Please see ports Thunderbolt and views: frequently asked questions (FAQ) - Apple Support .

  1. the "hot pluggable" Thunderbolt devices using Windows with Boot Camp?

  Thunderbolt hot plugging is supported under Windows 8 or 8.1 on all Macs from 2014 and later.

  For all other Mac computers, Windows 7, 8 and 8.1 scans and active them Thunderbolt devices connected to ports Thunderbolt during the Windows startup process. If your device has been plugged in not at startup, Windows detects not without a reboot.

• All-in-one HP Officejet 7300/7400 series, it will work with Windows 7 and how to get the OCR software work?

  I have a HP Officejet 7300/7400 series all-in-one, it will work with Windows 7 and how to get the OCR software work?

  By installing complete software functionality of the HP cd or online installation and connection of the printer only when the installation says too much

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=391182#n193

• Satellite Pro A60 - how to get the recovery CD?

  Hello

  I have a Satellite A60 and my utils / driver disk is not in use.

  Is there anywhere I can download or there at - it somewhere that I can buy one?

  Especially the "FN" shortcut key will not work. I tried to download the utilities from the page drivers but its defo not to play ball.

  Any help on that would be great.

  ATB
  Steve

  Hello

  I found a new page of Toshiba.

  https://backupmedia.Toshiba.EU/landing.aspx

  It s an online store of Media Backup of Toshiba Europe and you should be able to order your CD of restoration on this page.

  _Regarding your FN order issue: _
  If you are using Win XP on your laptop, you must install the Hotkey utilities for display devices and Hotkey Utility get the FN buttons work.

  One thing is very important; If you install your operating system manually, please ensure you install drivers for Toshiba and utility in the right order. On the Toshiba driver page, you can find the installation instruction txt file and you would find the mentioned order insall. Follow this all in the driver installation procedure!

  Good bye

• How to get the display driver for hp250 g1 for windows7 32 bit

  Hi, I bought a laptop HP 250 G1 & installed windows 7(32bit) but I'm not able to find the display for this driver. The i found on the site of hp drivers named AMD graphics high definition hd extracted al drivers driver in drive c, but there is no display in driver. Please help me to get the display driver. I will always be grateful.

  Paiva

  Hello:

  I see that your model comes with an AMD graphics adapter.  See page 4 on the link below.

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04111387

  See if this Intel graphics driver works for you...

  https://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23713&lang=eng&OSVersion=Windows%207%20(32-bit) * & DownloadType = 0a % 09% 09% 09% 09% 09% 09% 09Drivers % 0 a 09 09% 09% 09% 09% 09

• Satellite Pro L300: How to get the sleep settings

  Before you have to play with the Satellite Pro L300 laptop recently (on the instructions of the Tech) when I close the lid of the laptop that he went to sleep BUT when I opened the lid eventually, I had to press the power button to restart the laptop.

  But now, he's just on stand by.
  How can I get this back to how it was (having to press the button to exit stnd - in)-help!

  I tried to turn off Toshiba power saver and using the windows settings but nothing
  I have treid working :(

  Can anyone help?

  I get at the end of my home with this computer laptop blinkin :(

• I lost Windows Vista on Satellite Pro U400 - how to get the original configuration

  All;

  I missed upwards at the start of my new laptop... I fail to use Vista.
  So I used the system recovery DVD. a version of Xp installation crashed the Vista partition!

  How can I get the original installation of this machine...?

  Any help is welcome...

  Kind regards...

  Hello

  Try with https://backupmedia.toshiba.eu/landing.aspx

  Good bye

• Satellite Pro 460CDX: how to get the BIOS to recognize the disk external drive port?

  How do you get the BIOS to recognize external floppy port?

  HEEE? ?:|
  Are you sure you know how to update the BIOS?

  Come on cheshire! The update of the BIOS is risky If you n t know how to do!
  Usually, you don't need additional software to recognize the USB FDD drive or driver!

  I hope you have downloaded the good BIOS and use the correct procedure to update BOS, because if you do this in the wrong way to damage the motherboard!
  It is important to first read the BIOS update guide lines! You can find it on the download page of the BIOS under more information

• Satellite Pro L300: How to change the display settings

  Hi I have a toshiba satellite pro l300 run a pentium dual core and intel 965 display chip any games I play on my laptop, they open in a small box and not full screen I've had a quick glance at the settings to try to resolve this with no luck.

  Can someone tell me if there is a way to change the settings to get the games to play in full screen, my current display settings are 1280 x 800 pixels and running at 32-bit color.

  Any help would be appreciated.

  You should set this option to full screen in the games you play. Checked for these options, because you are given something like graphics, solution details and in most cases should be windowed.

  One thing you might try is to uninstall your current display drivers, and then reinstall new ones. Make sure that you use tools like ccleaner cleaning record or similar.
  Check if you have installed all the latest updates of windows and directx version, if you are using Windows XP.

• Satellite L500 - how to get the keys FN works on Windows 7 64 bit?

  Hello

  I need to reinstall Windows 7 on a Satellite L500, but I can't get the FN keys to work. Someone here would be able to give ideas on how to get this to work?

  Case No.

  Hello

  It's pretty easy. Go to the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] and download the utility of Vap and Flashcard support. Then, install Vap and restart your laptop. After that do it for the support of Flashcard.

• Satellite Pro P100 can not get the screen to work again

  If someone could point me in the right direction, I would be very grateful!

  I bought a monitor to use when I am in the office (it's a LG Flatron L225WT), installed the software that came with it and plugged. Nothing seemed to happen, then in Toshiba HWSetup, I changed my power on the screen 'LCD + Analog RGB'.

  To cut a long story short, the external screen works perfectly now, but I cannot access the internal screen, even after changing the power supply on the display to 'Automatic Selection '. The Fn + F5 key does not appear to have any effect at all.

  I must have inadvertently done something to mess up the computer. Can anyone suggest how I could reset it back?

  TIA to all who can help you!

  -Laurence

  I put t know what laptop you have and don t know what OS you are using, but it seems that you have managed to set the external monitor as the main screen.
  You should change in display properties (right click on desktop-> properties)

  Somewhere in the settings, you should try to score the internal display (1) and should mark use this device as the primary monitor

  You won't find any similar settings or this will not help then set the operating system to the point of time at the beginning. In this case all settings will be reset!

• How to get the programs to work on my computer.

  I put on my computer...

  Deleted apps when updating from your PC

  Name of the application	Editor	Version
  HP DeskJet 2130 series based Device Software	Hewlett-Packard Co.	35.0.61.54677
  HP DeskJet 2130 series help	Hewlett-Packard	35.0.0
  HP Photo Creations	HP	1.0.0.7702
  HP update	Hewlett-Packard	5.005.002.002
  Logitech Webcam Software	Logitech Inc.	2.80
  Study of improved product for the HP DeskJet 2130 series	Hewlett-Packard Co.	35.0.61.54677

  Sunday, January 3, 2016 16:22

  now I can't get the programs to operate, they were removed when the updates were made...

  But I need help to get the programs to be feasible, have attempted since January 3...

  Hello

  Of course, they won't work; they were removed during the update and are more installed on the operating system

  .

  Reinstall them from the original (CD DVD or download) media)

  See here for what is removed:

  "How to update windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  Note

  What settings will be retained
  

  • All user accounts.
  • Files in the files of all users C:\Users\(user-name) . (ex: desktop, My Documents, my music, etc...)
  • Wireless network connections
  • Applications on the Windows Store will be kept.
  • Mobile broadband connections
  • Parameters of BitLocker and BitLocker To Go
  • Drive letter assignments
  • Customizers like the lock screen background and desktop wallpaper
  • Choices you make during the Windows Welcome, such as the accounts of users and computer name, will not change.
  • Settings network, libraries, and Windows Update will not change.
  • Parameters of Customer Experience Improvement Program will not change.
  • Error report settings Windows will not change.
  • Some drivers may or may not be deleted.

  Which settings will NOT be preserved

  • File type associations
  • Display settings
  • User settings
  • The Windows Firewall settings
  • Application settings
  • All installed 3rd party desktop programs (not the apps Store). A list of removed apps will be saved on your desktop once the update is complete to let you know what programs have been removed.
  • You change PC settings return to their default values.
  • Installed Windows updates will be removed.
  • Some drivers may or may not be deleted.

  See you soon.