Save a copy of a file using the "Save as" funtion in the same directory that the oringinal is in?

Similar Questions

• How can I copy an .exe file of the winow downloads on my hard drive?

  the header is the question

  "How can I copy an .exe file of the winow downloads on my hard drive?

  If the file is always displayed in the Download Manager window, then you can use open folder on the shortcut menu. If this entry is grayed out then the file is no longer at this location to download. Possible causes are cleaning software or anti-virus that deleted the file.

• Generate class files using the WSDL url and wsimport

  I am trying to create a java application that hits the service exposed by hub.

  To create the application in java, I'm generating class files using the WSDL that is created and exposed by the hub.

  Executed steps:

  1 created an application in OPA.

  2. deployed on the hub (usinf deploy option of snapshot on Policy Modeling)

  3. in the deployment tab, I see the request and get the url of the wsdl by clicking on it.

  I try on this wsdl wsimport command. But it gives me following error messages.

  ---------------------------------------------------------------------------------------------------

  C:\***\AllFiles > wsimport http://localhost:7001/hub/determinations-Server/assess/SOAP/generic/12.2/AttemptOne?WSDL

  the analysis of WSDL...

  [ERROR] invalid WSDL http://localhost:7001/hub/determinations-Server/assess/SOAP/generic/12.2/AttemptOne?WSDL , expected {http://schemas.xmlsoap.org/wsdl/} html (line 2) data definitions

  Cannot read the WSDL document: ( http://localhost:7001/Hub/determinations-Server/assess/SOAP/Generic/12.2/AttemptOne?WSDL , because 1) did not find the document. (/ 2) the document could not be read. (3) the element the document root is not < wsdl:definitions >.

  [ERROR] WSDL:service is not found in the WSDL (s) provided:

  At least a WSDL with definition of at least one service must be provided.

  Unable to parse the WSDL file.

  ---------------------------------------------------------------------------------------------------

  If I store the wsdl file in a file on my local computer, and then run wsimport, it generates the classes very well.

  Can someone provide me with a way that I can generate the classes using the wsdl url and not the local file?

  Also, do I need to create a connection in the Connections tab on the hub?

  Thanks in advance.

  -Alain

  Looks like you could run in the user authentication when wsimport runs against the WSDL. Instead of the WSDL, its reception, the login page.

  The best way to work around this problem is perhaps what you do already - to obtain the wsdl and save them in a file.

  Another solution is to disable the restriction of connection to the Web Service API. You can do this in the menu on the users page (admin role can turn on and off.

  You can switch between a user and a password with the call of the WSDL file, but I don't know if its possible to do with wsimport

  See you soon

  Frank

• disk size problm after copying a large file to the VM then disconnected

  Dear Sir

  I have a VM with allowances dynamic storage virtual hard drive of 300 GB,.

  HE on that disk space is 50 GB.

  Ive copied on it a 100 GB file so now space space disc is 150 GB and 150 GB is free.

  Ive deleted the file 100 GB of the virtual machine, but am supersized now that the file of the virtual machine is still 150 GB in size.

  What should do? as it fits the 50 GB after deleting the file from the virtual machine.

  Hello

  Yes it is planned.

  You have copied a huge file in the virtual computer-> who is the virtual disk in order to accommodate the new file->

  You remove the huge file-> your take off just to comments operating system, the file in the list of the directory->

  Your data is still there, it does not erase the data and rewrite from scratch.

  In order to recover the disk space, you need a number of things:

  -first of all your guests, OS file system must be supported (Windows FAT/NTFS is)

  -Your guest must be stopped

  -The type of the guest operating system disk should not be preallocated.

  -Your host operating system might need a lot of free space on the drive according to your VM disk configuration.

  If stored in several files, you must have a few GB free (size of the Ramdisk / 32) Go, but say more than 4 GB, keep 10 GB free to be on the safe side.

  If your virtual machine is stored in a single file, so you must have your used VM disk size + a few GB of free... for example. If your virtual disk is currently using 200 GB you need tell 204 GB free before starting the operation of a compact disc.

  Then in the configuration of VMware go into settings of virtual machines:

  

  Use the 'Compact disc' button.

  Be very very patient and wait, because you want to get 100GB which will take some time.

  --

  Wil

• Is it possible to create a new file using the XML via java Script?

  Hello everyone,

  Is it possible to create a new file using the XML via java Script

  • I have xml information that need to use for file name, size.
  • Based on xml file we can create a new file in InDesign with java script?
  • Kindly help me if anyone has an idea about this.

  I use InDesign CS4 on windows 7

  Sample file is attached below.

  Kind regards

  Siva

  <UpdateAd>
  <AdId>3403699</AdId>
  <Width type="mm">91,79</Width>
  <Height type="mm">80,00</Height>
  <ProductionCategory>4</ProductionCategory>
  <BookedCCIColors>sw</BookedCCIColors>
  <WorkFlowType>PDF</WorkFlowType>
  <CustomerNumber>652224</CustomerNumber>
  <CustName1>Erich Prang</CustName1>
  <Description/>
  <Description2>R</Description2>
  <UpdateIns>
  <Titel>RHZ</Titel>
  <Publication>B2</Publication>
  <RunDate>26-07-2011</RunDate>
  <Zone>H30</Zone>
  <KDDATEN>nein</KDDATEN>
  </UpdateIns>
  <WorkflowStep>IR</WorkflowStep>
  <Proof>No</Proof>
  </UpdateAd>
  
  

  

  Try this:

  var f =File.openDialog ();
  f.open('r');
  var xml = new XML(f.read());
  f.close();
  
  var myDocument = app.documents.add();
  myDocument.documentPreferences.pageHeight = xml..Height+"mm";
  myDocument.documentPreferences.pageWidth = xml..Width+"mm";
  var rect = myDocument.pages[0].rectangles,add();
  rect.geometricBounds = myDocument.pages[0].bounds;
  rect.strokeAlignment = StrokeAlignment.INSIDE_ALIGNMENT;
  rect.strokeColor = myDocument.swatches.item("Black");
  rect.strokeWeight = 1;
  myDocument.save(File(f.path + "/" + xml..AdId + ".indd"))
  

  Substances

• Creation Waveform TDMS file using the functions DDC_ in C 6.0?

  I'm trying to implement an export written in C 6.0. I can make the TDMS files using the DDC_ controls without any problem. But I can't understand how waveform TDMS files. I thought that if I added properties wf_ I should be able to define the waveform = Yes. But it seems to be more complicated than that.

  Here's what I work until now... (with the exception of the error handling to make it easier to see)

  DDC_CreateFile (sDestFileName, "TDMS", gszinfoline1, gszinfoline2, gszinfoline3, gszinfoline4, & hOutputFile);

  DDC_AddChannelGroup (hOutputFile, szGROUP_NAME, szGROUP_DESC, & hgroup)

  DDC_CreateChannelGroupPropertyTimestampComponents (hgroup,
  szCHANNEL_NAME,
  year (unsigned int),
  months (unsigned int).
  days (unsigned int).
  hours (unsigned int).
  minutes (unsigned int).
  wholeseconds (unsigned int),
  (double) fractionseconds);

  DDC_AddChannel (hgroup, DDC_Double, szCHANNEL_NAME, szCHANNEL_DESC, szCHANNEL_UNITS, & lphchannel);

  DDC_CreateChannelProperty (lphchannel, "wf_increment", DDC_Double, dInterval);
  DDC_CreateChannelProperty (lphchannel, 'wf_xname', DDC_String, 'Time');
  DDC_CreateChannelProperty (lphchannel, "wf_xunit_string", DDC_String, "s");
  DDC_CreateChannelProperty (lphchannel, "wf_start_offset", DDC_Double, 0,0);

  Any suggestions? (Details of this aid are intended for LV or completely absent)

  Thank you very much

  Don

  Hi Don,

  Thanks for the additional information.  After doing research a bit more, it seems that there are 3 required properties so that the property of waveform to be set to yes.  These are wf_start_offset, wf_increment and wf_samples.  If you add in a call such as the following, this should solve the problem:

  DDC_CreateChannelProperty (lphchannel, "wf_samples", DDC_Int32, 5);

  Just replace with the length of your table 5.

  Kind regards

• How to open the pdf file using the LabVIEW program

  I want to open the pdf file using the system exe, but this isn't the case. Can you help me?

  Thanks for your help.

• Transfer files using the Personal Communicator

  All,

  Can I transfer files using the cell phone?

  Someone at - it a user guide and Administrator's guide on how to configure and use this installation?

  Thank you

  Lucian Medeiros

  No, you can't. You would need for this jabber.

  Q.	Cisco Unified Personal Communicator and Cisco Jabber for Windows can interact?

  A.	Yes, these two clients can interact.   Note Although features that are not part of the Cisco Unified Personal Communicator client. like the screenshot, video, desktop sharing and file transfer; are not interoperable between two clients.

  http://www.Cisco.com/en/us/partner/docs/voice_ip_comm/Jabber/Windows/9_0_1/b_jabber_win_faq_chapter_01.html

  HTH

  Java

  If it helps, please note

  www.Cisco.com/go/pdihelpdesk

• My creative cloud cannot happen on the adobe servers and when I tried to repair the host file using the creative cloud cleaning tool, it displays Error occurred while setting entries HF: 5

  My creative cloud cannot happen on the adobe servers and when I tried to repair the host file using the creative cloud cleaning tool, it displays Error occurred while setting entries HF: 5

  Please let us know your operating system.

  Concerning

  Megha Rawat

• Can I add watermarks to PDF files using the PDF package?

  Can I add watermarks to PDF files using the PDF package?

  Hi Susannah,

  Adobe PDF Pack does not allow to edit a PDF file. To do this, you would need Acrobat. We invite you to try Acrobat free for 30 days: see http://www.adobe.com/products/acrobat.html for more information.

  This help document describes how to watermark a PDF in Acrobat: add watermarks to PDF

  Best,

  Sara

• Loading multiple files using the same interface in ODI

  Hi all
  
  We load multiple files using the same interface and get the error "java.sql.SQLException: ORA-00942: table or view does not exist" while inserting record in the staging table. It looks like the same temporary table is used when loading multiple files and the error. Grateful if someone offers a solution to avoid this error.
  We use the following KMS:
  
  (1) LKM SQL file
  (2) IKM Oracle SQL COMMAND append.
  
  Receive a quick response.
  
  Thank you
  RP

  Hello

  See this http://odiexperts.com/interface-parallel-execution-a-new-solution

  Thank you
  Fati

• Opening files using the InCopy layout

  How configure you a default to open all files using the InCopy layout? (CS5)

  Without any document open, go to the 'View' menu and select the Mode of disposal. On all of the files will be open in the corresponding mode.

• content of an export file using the datapump

  How can we see the contents of an export file using the datapump.
  As in the normal exp/imp method, if we use the parameter show = o during import, it displays the script/content of the dump file.
  
  Is there a method to do this in the datapump method?

  Use the Option SQLFILE

  Directory system/passwd Impdp = directory_name dumpfile = filename.dmp logfile = logfile.log sqlfile = export_scripts.sql full = y

• Make a new file using the "Save as".

  Bit of feedback to the staff HERE...

  We use LabVIEW 8.6. and, at least in this implementation, trying to make a new VI using the command save as product a menu of choices, including none make sense to me. Sorry, but I can't say which of them will produce only makes a new file with a changed name to be refined. Trial and error product folders, but not files, replaces the original file (why would I do that, I chose save as no record) and about each result other than what I was trying to accomplish.

  May you fix this in a future release, but for 8.6, I feel that I must take a class just to save the new file.

  you're not alone...

  Have you tried "open extra copy?  This is probably what you want.  It will not copy the original and will keep the open source.

• No sound save avi files using the Camileo S20

  Hi all

  I got the s20 Thursday and it was a nightmare. Before his departure, I couldn't work in Movie Edit Pro or sony vegas video files.
  It has not yet worked in the Arcsoft software that comes with it.

  I tried it on three different computers and it continues to view with no audio signal upward.
  I tried all the codecs you can think of and none of them worked. Now, I hear no sound even when I play on the S20.
  I didn't really now what to do. I have two other hd camcorders and they work fine on my computer.

  I had to reformat my computer as the codecs it had messed up. If I had my way, I would send back and be done with it, but I have to wait until tomorrow before I can call this number that was given to me.

  What I want to know is:
  Y at - it somehow I get the avi files to work in sony vegas and movie edit pro 15 more?

  Any help or advice would be welcome.

  Thank you

  concerning
  Chrisc74

  > Is there anyway I can get the avi files in sony vegas and movie edit pro 15

  As much as I know the S20 creates h264 encoded videos.
  This means that you the codex H264 in order to get the video and audio on your laptop.
  I can't say anything about the sony vegas and movie edit pro software because I don t use it.
  But I edited my videos using the common windows movie maker and everything was ok.