save an excel report

Similar Questions

• How to automatically save excel report?

  Dear Sir.

  I'm generated excellent using labview,.

  Currently, my doubt is how to Save automatically this report in the directory specified?

  Please inform me,

  Thank you...

  Do you use report generation tools for that?

  If Yes, then you can use 'save the report in the file.vi. If you don't use a Toolbox, you can use "Save" method by calling invoke node

  and by the way "workbook" refers to it.

• excellent report generation does not close Excel

  I use the excel Report Builder to save test reports.  I can create the report using a template and writing if necessary without any problem.  After each test step, I add data and save the report.  I continue to Excel closed using the modification of the parameter of the State of the window.  I don't want the user to see Excel or even know it is there.

  The question is, when I'm done test and use features, report vi, it leaves an open excel instance that you see in the Task Manager.  And the only way to close that instance is to open one of the files that was created and close it and then exit excel.  The memory used by this instance develops a little every time that a new file is created.

  LabVIEW 2011 SP1 (32-bit 11.0.1.F2)

  Excel 2007

  How can I close excel completely after each test?

  You're just sorry.  Attached is an improved version which works, but again not sure if there is a better way.

  This will get the HWND before disposing of it, has it as usual, then given the HWND get PID (it was the bad terminal last time) and then kill based on that.  It seems to work and I tested this time.

• conversion of the error of date / time when using easy excel reports

  I export a 2D array to an excel file using Excel reports easy vi. I have no problem with that. My data has a number of areas with different formats (text and date/time). My problem is the following:

  * some (in other words, not all data is in the same worksheet) the veiled values of date/time to mm/dd/yyyy format whereas they should be in mm/dd/yyyy (is the excel format it is y in!). Essentially, I have 30/09/2008 (September 30, 2008) in a cell. After ticks on Oct. 1, it will display the date as, 01/10/2008. Excel thinks that this date is in the format dd/mm/yyyy.

  This is a known error in earlier versions of Excel (2002), in particular when you convert a .csv, .xls file. The solution, it was not to add "Local: = True ' at the end of the vba command string (see here: MS Knowledge Base). Here, in LabView I'm not sure how to proceed.

  I tried to change the format of the column in question to the 'text' by calling an Excel Macro in LabView, but do you think I can find the vba command to do? No, not so much.

  LabView saves the Excel file in 97-2003 format (I use MSOffice 2007) and I wonder if the version they are using does not consider the time correction, as described in the knowledge base (or if it applies).

  Any suggestions, I'd love to hear from you.

  Kind regards

  David.

  Hi LaRisa,.

  I was able to find the cell Format Excel set vi and successfully change the format of the value of the cell. It wasn't until I had found the vi that I realized that I've been down this road before. Change the format after the table has been created does not change values dd and mm switching that has already occurred. However, if I did before I "created the table" (or vi Excel table) and set the format to be '@' then it displays the string like 'Text' in the Excel file. That's nice. I can control what cell, row, or column to format now. If I want to be in a date format then I must apply the Format of cell vi after the easy Excel table vi.

  It sounds like a stupid race around me...

• After the upgrade to IE 10, not able to download/export users excellent reports in Oracle EBS 12.0.6 forms order orgranizer

  After the upgrade to IE 10, not able to download/export users excellent reports in Oracle EBS 12.0.6 forms order orgranizer. It of something to do with the settings of internet explore, please advise to solve this problem.

  The new window opens and immediately disappears.

  Thanks for your replies.

  We can get the exported file now. In IE 10, all results export are saved temporarily in the download options, press Ctrl + J (view downloads) and save the results and open it.

• Need a script for PowerCLI for a VM under Excel report

  Hello

  Could someone help me with the creation of a script to get a regular monthly report (in the Excel file on a location of vCenter server) which includes the following data:

  VM name, size HDD, RAM allocated, quantity of CPU and 4 Custom Annotations (key and value 0-3)

  Thanks in advance!

  It is a simple tool called RVtool... use that it is just a minutes of the thing, he'll get all the necessary detial and you save what excel...

• How can I stop my airbook to save my Excel worksheet every 5 minutes?

  How can I stop my airbook to save my Excel worksheet every 5 minutes?

  

  The above comes from:

  6425 https://support.Office.com/en-us/article/automatically-save-and-recover-files-6c B 1-6559-4BBF-8F80-4F038402FF02

• Dynamic data of several channels in table, then save in Excel

  Hello

  I am acquiring data from several channels (4-5) and I'd like to collect samples at low rates (10 Hz for 3 minutes max). For various reasons I use Dynamic Data type, although I know that it is not the best way (some say it is a wrong data type ). I also want to save data to a file (the best option would be data excel file).

  If I acquire data 10 times per second, it is quite slow to save in excel (this is the slowest option of all types of data). So I would like to fill a table or matrix of acquired data and then write Excel file (I use scripture to measure file). But I don't know how to do - if I convert DDT in DBL, build an array and connect it to change registry, it works but I lose the information in column names and I'm wasting time. If I connect to build the table a DDT and then shift record another, it returns the table 1 d of DDT. I would like to have 2D DDT, which collects all the information loop.  Is there a suggestion how to solve?

  I'm sure it would be easier solved my problem with the double data type but I also use select signals VI which is the VI I am not able to replace at this time.

  Good day

  Lefebvre

  I don't know if there is a question here, or what.  Doing what you say you want to make, acquire the data of 4-5 channels at low rates (10 Hz for 3 minutes) and save the data in an Excel file (I assume you mean really Excel, i.e. a file with the extension .xls or .xlsx) is really a very easy thing to do in LabVIEW, especially if you are not using :

  • DAQ Assistant
  • Dynamic Data
  • Write to the action file.

  Indeed, you seem to realize this, but I guess you want to 'do the hard', in any case.

  Good luck.

  Bob Schor

• How can you save an Excel file to PDF?

  Hello list,

  My VI to save an Excel file in PDF format is attached.

  If I run the VI, it saves a PDF file (probably because I'm recording with the PDF extension).

  When I try to open the file in Acrobat, I get the error that it is an unsupported file type.

  I use "17" as "File Format" (I found online and it is supposed to work for Word, so I thought it would work in Excel).

  If I change the format of 'file' '56', I can open the saved file back into Excel and then save it in PDF format using the menu drop down and it opens correctly in Acrobat, so I think that "17" is not correct.

  What no one knows the correct value for 'File Format', or I'm doing something wrong.

  Thank you

  Mike

  With the help of LV 2011 in Windows 7 & Excel 2010

  http://www.lmgtfy.com/?q=xlTypePDF+in+Excel+2010

  Specifically, http://code.msdn.microsoft.com/office/Excel-2010-Export-Data-to-07bb5550

  Search Excel Help for xlTypePDF and you'll see that the number is 0.

• Excel Report Builder error

  Hello

  I have a test application that uses MS Excel Report toolkit to print the test results using a custom template file. When I try to print the test results, I get the following 2146959355 error (see attached photo). No idea what triggers it? It seems that is generated by Excel Active X control. I am also attaching the Vi I use to view the results of the tests and models

  Thank you

  Nick

  Look at this

  http://digital.NI.com/public.nsf/allkb/1C025F018CB5761686256C56007DD258

  http://digital.NI.com/public.nsf/allkb/83211E3A088D0C3786256DB700621FE8

• Missing column of clast Excel reports

  I have a report that has 40 columns and landscape orientation. left and right margins is in 0,0972.

  It shows all the columns on the pdf format, but missing last column when using the Excel format.

  Is there a limitation for the report in Excel format?

  If the PDF has the last column, Excel is not looking for the last column why?

  Your information and help is much appreciated,

  Kind regards

  Iccsi

  The report for Excel must border does not overlap, or the output of the excel report does not display the column,

  Kind regards

  Iccsi,

• CSV and html excel report

  Hello
  
  I have some reports to be downloaded in excel
  
  are there any examples of code and tutorals?
  
  
  

  Hello

  For HTML reports, you must do some CSS work and the rest is the same with what you were doing with your code CFM...

  and for the Excel reports you can do it like this,

  
  
  SELECT * FROM TABLENAME BY COLUMN
  
  
  

  
  
  
  
  
  
  
  
  
  

  #column1 #.

  #column2 #.

  #column3 #.

  #column4 #.

• Fixed example of 'Generate an Excel report'

  I recently answered a question posed by a user of the Forum on an error occurred when you try to generate an Excel file with the report generation tool.  I thought that the code example he used was 'unusual' and too complex and just discovered that he was, in fact, the sample report template (Excel) 2013 'Generate' LabVIEW.

  In the spirit of trying to demonstrate it's nice "easy Excel' recent functions, I have rewritten this example and set here.  In doing so, I discovered (and reported to the NC) a "bug/feature" of the Excel function insert Graph.  One of its parameters allows you to position the chart by specifying the left and top edges (left would be the Excel column, would be the Excel line).  The only problem is that the parameters are reversed - to put the graphic on line 1, column G, you specify (0, 6), (6, 0).  Oops...

  Oops, I have attached an earlier version of the demo, which has no Documentation and has not been "cleaned".  Use this instead (sorry about that - I forgot to hit "Save" I just changed the VI).

  BS

• Error-2147352567 when you use save the vi report

  Hello

  I am developing a software test bench end line for a company. Everything was going well until I met an unexpected error which I don't understand. My code works a simulation engine and stores data in two excel files. When I have the path disconnected to save the report to the File.vi (screenshot 1), my program works without problem and records one of the files and returns an error due to the vi save report being disconnected (as expected). But when I connect the path to save the report to the File.vi, I get an error-2147352567 (screenshot 2) at a table to append to report.vi elsewhere in the code, which worked perfectly well until the road was connected to the vi to save the report. Also, now the second excel file is saved because its path has been connected. I don't understand what is the question. I couldn't find any source that has given me a reasonable solution to the problem either. I use Labview for less than 2 weeks, so forgive me if I forgot something.

  Hi DPAC.

  My apologies for the confusion in the previous post, I thank very you much to clarify it.

  Following my last post; the error was due to a race condition. There is no data flow between two separate writing report files. This means that LabVIEW will try to run the two bits of code in parallel. However, it was sometimes causing one of the sub-vis to be called by two different parts of the code at the same time, causing the error.

  This is the reason for which the code executes without error above if you have disconnected the path to the first 'save report to File.vi', because this part of the code was not running, allowing the second party to run freely.

  To counter this I simply wired terminal 'error' "save report to File.vi" (the one that used the All_Saved.xlsx) in the terminal ' error in ' of the 'new Report.vi' (one who has used the Template.xlsx). Because the screws will not work until all entries are filled, this forces the writing of the first report before the writing of the second report, not occur at the same time.

  I have attached the revised version of the "EOL_V1.vi" where you will be able to see how I wired errors to force execution.

  I also noticed that you have not initialized your shift register "speed". This means that every time that you run the program, it will retain the last value from the previous execution. Is - this intentional? This means that your worksheet does not properly update if you run the program twice in a row.

  Thank you

• Export Excel report

  Hello

  I use a Public report link in a page to have a dynamic (Excel) files.

  As you can see below, for the report's export is fine (accent French name of the item)

  

  

  But when I use the link to report Public, I'm in trouble with the French accent!

  

  

  Thanks for your help

  Stone

  Hi Pierre,.

  Can you connect a case request on this issue and fix your export file example?

  We need to study this further as to why the characters change with regard to accents.

  You can save a case within your admin-> help & support.

  Thank you

  -Sidney