Save as a PNG, update changes in CC2015?

Hi all, I've been make transparent PNG files for years and just recently things seemed to have changed.

I saved my Photoshop file to 8-bit. It shows 8 bit in Bridge and in the image mode when it is open.

I then save in PNG format with compression - and he is 16-bit. I've never had this happen before. I've done several times even resave Photoshop and confirm there are 8-bit.

I tried exporting instead and it works - but now Bridge Watch is more than the number of bits and file size are and it shows the colorspace as unmarked. I use Bridge to check my file bit depth and dimensions and the color space before download it as my digital products.

Did some research for tuts and info found on the craze for export - but it is not showing me something about the properties of the file in bridge. I would like know how to display this info in Bridge.

So, I am able to export a png 8-bit now, but I wish that the properties of the Bridge file showed.

Update: Okay, I discovered that the "Save As" method is still save the PNG like this, it's just that Bridge is always showing the number of bits to 16 bits. So, seems to be a bridge problem, not Photoshop. I'll have to look at why Bridge does not appear the number of correct bits on these files. (It used to be precise).

(Sorry I'm more early - I was traveling just after that I posted).

Tags: Photoshop

Similar Questions

  • "Save Image under" continues to change directories

    "Save Image under" continues to change the location, it saves the file. As I go through the different pages and save some images, I noticed that sometimes it saves where I expect to, (the location that I recently selected when saving an image), but very often in the same session (which means that I've not closed and restarted FF), he decided to change the location of a directory that I used earlier , at the place where this has saved the previous file.

    I thought it would be something like a scenario, I opened 1-5 tabs, save images to A location. Then I save a file at location B, open 6 to 10 pages, save a file to the location a new. At this point, I expect that my files by default to A location, but perhaps pages 6 to 10 are now held B that are associated with them and they will default it there instead. I just test that and this isn't.

    It is also not extension (.jpg, .gif) that forces the change of location. I can't understand what triggers it.

    Does anyone know if there is another topic: config that we can change, (which replaces no doubt the next FF update in 5 minutes) to restore the appropriate behavior?

    This behavior started with the upgrade to 7 FF.


  • I already do not export in any format or save in .jpg, .png

    HelloW, I work in photoshop all the time, and today, I already do not export in any format or save in .jpg, .png, because what is happening? and what do I do?

    Hello

    I just checked that mode is CMYK.

    Please change it to RGB and check.

    Image-> Mode-> RGB

    Concerning

    Jitendra

  • New update changed junk e-mail delete tab

    This new update changed by e-mail on my junk e-mail folder, I used to click on edit select all, and then press DELETE, now that the service is gone I have to manually do it 1 by 1?

    Or you can press command + A to select all the.

  • [Depressed] Due to the cannot update/change my card wireless dv8000t

    My HP pavilion dv8000t Intel 3945abg pci-e wireless card died a week ago and I want to upgrade to Intel5300agn because it supports Wireless-N much faster than G.

    However, I got a 104 error messeage: unsupported material and never boot into windows.

    I checked the internet and understood this limited HP than dv8000t support Intel3945 abg only bios.

    I don't know the reason behind this, however, whatever the reason, it is totally unacceptable.

    You cannot update/change the brand of the wifi card, it's the most ridiculous thing that I have experienced in my life of the computer.

    I'm a fan of HP and I always recommend my fds HP and they trust in me and buy HP laptops that I am the head of the spirit of my circle.

    Unfortunately, after this time, I can't buy any laptop of HP unless HP change their policy which is to give the user benefits from upgrading their equipment.

    HP must indicate the parts that customers of can/Can ' t make clear in their brochure. I wouldn't buy this dv8000t if I know that I can not update/change my wireless card.

    One more thing, it is that the total customer care serivces is crap.

    Sharon of the team don't even know not dv8000t is intel based from the model number. I must give a conference to tell him how HP named their laptops.

    dv8000 (T), T for intel cpu dv8000 (Z), Z is AMD processor-based. I really doubt on the quality of the knowledge of their own products customer service team.

    A frustrated customer.

    You can also use usb adaptors as well for the wireless, it doesn't have to be an internal card. But you can be upset by a manufacturer to support only the card with which he delivered. These aren't desktop computers.

  • Updates change the resolution

    The last two times that installed Windows automatic updates, the next time I used the computer, the resolution was changed to one that is less than the optimum for Windows Vista.  I did a system restore every time to solve the problem, because it was easier than trying to figure out how to reset the resolution.  Why do auto update change my resolution?

    To change your display resolution:

    1. right click on the desktop and select "personalize".

    2. click on "Display settings" at the bottom.

    3. in the window that appears, move the slider to change your resolution. If you don't know what you want, try to drag the increment of a cursor at a time and by clicking on 'Apply' at the bottom to try the resolution. Note: If you change the resolution to one that is not supported by your monitor and your screen becomes black or displays an error message, DO NOT PRESS ANYTHING! Wait 15 to 20 seconds and the display will return to a compatible resolution.

    Now that you know how to change your resolution, you can feel free to install updates in the future.

    Hope this fixes your problems,

    Rifdhan

    PS: If you think that it's your answer, be sure to click "Mark as answer" at the bottom of this box!

  • Error message "failure configuration windows updates, changes in recovery, do not turn off computer.

    I tried to update my laptop with windows updates and an error message "failure windows updates, changes configuration recovery, stop computer" has been there for 20 hours and nothing happens. I can't get rid of this message despite the closure of the laptop for 2 hours and take out the battery. How can I get out of this perpetual loop please?

    I have windows 8.

    [Original title: Windows updates]

    Use any method is needed to access Advanced Startup Options in Windows 8 or 10 including if necessary to the installation media to create for Windows - 8.1 help Windows to start in console repair on the second screen.

    Startup options run the system restore which is the first line of defense and still has a Restore Point before installing the updates.

    If it does not try to repair the startup or as a last resort a refreshment or a Reset.

  • Update Windows Installer KB3002885 (and later KB3000061) causes "Failure Configuring Windows Updates, changes of restoration"

    I manually ran Windows Update for about 22 updates including KB3002885 (KB3000061 is not included at this time).  It resulted in "Failure Configuring Windows Updates, changes of recovery".

    Measures taken (without the fix):

    -Reboot

    -Restart in Boot Clean with Services MS no disabled state

    -Updated Troubleshotter

    -System Restore (3 weeks)

    -DISM.exe / Online/Cleanup-image /Restorehealth

    I started installing updates a little at a time and was able to install all the updates about 22 except KB3002885, which always causes the problem 'failure configuration... '. ».

    Updates at this point (November 14, 2014) identified KB3000061.  When update was executed for this update by itself it also caused the problem of the "default configuration... '. ».

    Updates about 22 that have been installed successfully some of them were: KB3000853, KB3004150, KB3003057, KB2978121 and KB2972101.  A more complete list is available if it is useful.

    Windows 8 Pro 64 bit w / Media Center

    Norton Security Suite

    THAT IS TO SAY 10.0.9200.17148

    Worm update: 10.0.22

    Perhaps relevant: I could never update this computer Windows 8.1 in 5 or 6 attempts over a period of 6 months.  Always comes back to the previously installed Windows 8.

    Otherwise, my computer works without other unusual problems.

    Hi Brad,

    Thank you for your response.

    For problems with the upgrade to Windows 8.1, I suggest you refer to the suggestion of Madeni K N replied on 8 January 2014.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/error-0xc1900101-0x40017-when-installing-Windows/8c893ae6-0e9b-4b7d-a647-b9065099efd6?page=1&TM=1389602587060

    For more information, you can check the link below.

    Update to Windows 8.1 of Windows 8.

    http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial

    Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

  • Updates to Windows 8 - "Configuration of the Windows updates, changes in restoration failure"

    Hello

    Recently I finally got my laptop back from repairs after 6 weeks. Now, it is in a 'clean' State (aka factory settins).

    I wanted to get to 8.1 Windows as soon as possible, but for this I need to be on the latest version of Windows 8.

    So I then try to run "Windows Update" and let it install all updates recommended. He manages to download all updates,

    and then he tries to configure these. About 98% or 99%, it gives the following message:

    'Configuration of the Windows updates, changes back failure'

    It then goes in an infinite loop constantly, he ran for hours and hours without having passed this screen.

    So far, the only solution is to reset it to factory settings, which brings me to the point before that I try to update, so it is not move me.

    I've tried so far, but no luck what follows:

    • http://support.Microsoft.com/kb/949358/en-us
    • http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/failure-configuring-Windows-updates-reverting/16219e5c-564b-4310-9f68-c9d595bb4cbe?page=1
    • http://support.Microsoft.com/kb/971058

    None of them has worked so far.

    To be clear:

    It is an OEM license. This doesn't mean no DISC, nor any ISO/Exe could work that they do not accept the product key.

    Many other people have the same problem.

    Please, I'm at a loss to date.

    Yours Sincerely,

    Leon

    Hi all

    Seems that I myself have found a potential workaround.

    Install only the KB2871389 allowed me to grab the download of Windows the Windows store 8.1.

    Then, I could install Windows 8.1 without a hitch and it normally seems using Windows Updater runs from there on.

    It is not yet a waterproof solution to water / final of 100%, but it seems to work for me.

    I hope this will help someone else with the same problem!

    Yours Sincerely,

    Leon

  • Lenovo thinkpad tablet 2(windodws 8) 3679MU. "Configuration of updates, changes recovery do not fail"

    I recently bought a Lenovo3679MU 2 thinkpad Tablet (windodws 8).  After less than 7 weeks of use, it started auto windows update and restarts, then gives a Message ' failed updates, changes recovery configuration does not turn off'... and then stuck in the loop...! Hepatitis a me... How can I get out me of this...

    "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

    http://support.Microsoft.com/kb/949358

  • Configuration failure update changes back windows

    Just today, I was on my windows high tower 8 ASUS) that worked very well until I noticed this message saying that the computer will restart soon to update so I clicked on the update and restart for all has updated but when I finally thought he would have started working, he says "failure in windows update changes recovery off not your computer" honestly I don't know what to do because I just got this computer as a week ago. I can't restart or do something for the computer, he's stuck on this message. At one point he did stop saying could not configure windows update but two ways it continues to flow to the same thing. Can someone please help me, I tried everything but nothing works. !

    PLEASE HELP ME!

    Start here: http://support.microsoft.com/kb/949358

  • Failure of windows updates changes to recovery (using Windows 8). Turn a computer off

    I did a refresh with Acer laptop and lost everything. RELOADED Office 2013 and some applications after if and it seemed to work.

    I went to then turn off the laptop and he tried to update about 72 updates. After 30 minutes, the message "preparation set up windows" do not turn off computer. When he tries to restart, the message "failure configuration windows update changes back? rises.

    He continues to do in cycles?

    Help

    JOhn

    Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
    http://support.Microsoft.com/kb/949358

    You need to disconnect all your removable media to the computer, such as removable disks (Blu - ray disc, DVD, CD), the memory cards (CompactFlash, Secure Digital card, Memory Stick card), and USB flash drives.
    These removable media can cause this problem during the restart of Windows.

    or

    System restore - Note if your computer is not configured to start from a CD or a DVD, or if Windows was preinstalled on your computer without the CD or DVD, see the documentation that came with the computer for instruction about how to continue, or go to the next method.

  • problem with windows update - said failure to configure updates changes in recovery

    Original title: problem with windows update

    computer says failure to configure updates changes in recovery but when you check the update history, he said updates succeeded, but one of them failed its been happening every time I turn on my computer went thrus my updates or not has them and if I update my computer will fix the problem

    Hello

    Thanks for the reply.

    Have you checked by installing the update manually?

    Send more information on the update failed, code number and update KB message.

    • Press the Windows and X keys simultaneously.
    • Click on Control Panel, then click on Windows Update.
    • Click view update history.
    • Double-click the update.
  • A statement UPDATE changes the line if the update changes the column even value?

    HI -.

    I have a main classification and the corresponding audit table. I have a trigger. I created using the suggestion:http://www.runningoracle.com/product_info.php?products_id=211

    Now the problem that I am facing is that: if I run the same query (same value) update on the main table for n times (with the same data)... my audit table is updated with a new record every time. He is not able to determine that the value is the same.

    My goal is to load the audit table data if the value in a cell in the main table is really have changed.

    A statement UPDATE changes the line if the update changes the column even value?

    Best regards

    I have a main Table and the corresponding Audit Table. I have a trigger. I created using the suggestion:http://www.runningoracle.com/product_info.php?products_id=211

    Why?

    You try to resolve what made you what are the PROBLEM that select as the solution?

    Now the problem that I am facing is that: if I run the same query (same value) update on the main table for n times (with the same data)... my audit table is updated with a new record every time.

    Yes - it is EXACTLY what you say that you wanted to do and EXACTLY what the code does in this article.

    He is not able to determine that the value is the same.

    I think you mean that the code does NOT check if the value is the same. You can certainly change the code to do this check. But I have a question to start with your need for such a solution.

    My goal is to load the audit table data if the value in a cell in the main table is really have changed.

    OK - then modify the code to check EACH COLUMN and compare its NEW value to the OLD value and insert only the table of audit if SOME (or columns you care specifically) have changed.

    A statement UPDATE changes the line if the update changes the column even value?

    It depends on what you mean by 'change the line '. Of course to update a column with the SAME value does not change the resulting data value.

    But the physical structure of the line, the location of the pieces of line and information in the header block (YVERT, etc.) will change. And, as others have said Oracle doesn't know and doesn't care, so if the new value of a column is the same as the old value will create redo, undo and the rest.

    Start over and tell us what PROBLEM you're trying to solve. Then we can help you find the best way to solve it.

  • Receive the error message after that firewall creative cloud update changes to our network.

    Receive the error message after that firewall creative cloud update changes to our network.

    We have a user, who tries to update through the creative application of cloud.  We tried to find what is blocked but have met a dead end.

    When the cloud creative software attempts to shout that we see a connection attempt https://ops:443 / ims/token/v1

    I did some research and the only reference to the IMS for Adobe, I could find was the IMSService.  This seems to be an authentication service.  The problem is that "ops" are not a valid domain.

    This issue seems to only affect the Creative Software of clouds as I was able to update a test computer with Creative Cloud via Adobe Application Manager.

    The user's system and our test system are running OS X Yosemite

    Hello

    Can you please check is below the links with white combination ports on your firewall. Adobe creative cloud desktop application uses these ports only.

    Address Ports
    ccmdls.Adobe.com 443
    IMS - na1.adobelogin.com 80 443
    IMS - prod06.adobelogin.com 443
    na1r.Services.Adobe.com 80 443
    prod-rel-ffc - ccm.oobesaas.adobe.com 443
    prod-rel - ffc.oobesaas.adobe.com 443
    LM.licenses.adobe.com 80 443
    ccmdl.Adobe.com 80
    swupmf.Adobe.com 80
    swupdl.Adobe.com 80
    ACP.adobeoobe.com

    443

    interaction.Adobe.com

    443

    Thank you

    Ashish

Maybe you are looking for