Save dialog box under does not display the list of files

Terminal Server R2 of 2012.  Dialog box "Save as" for a user does not display the list of files.  The address bar shows the way, there is a form for the file name box, and the user can save the file successfully.  But the space that would show the files in the selected directory is empty.  There is no form for the list of files box, it's just the grey box dialog box space - that is to say, it is not that it looks like an empty folder, there is simply no display form box.

The 'Open' dialog box appears normal, showing the list of files in the selected folder.

I had the user close the session on the Terminal Server and access it from another PC, even if I was not expecting to make a difference, and it didn't.  I have also connected on myself and has not experienced the same problem.  So it seems to be user-specific.

What a setting, the user has selected by mistake, or a mistake any?

Thanks for any help.

Hello

Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

See you soon.

Tags: Windows

Similar Questions

  • files recent home screen does not display the most recent files

    Hello

    my Photoshop welcome screen has continued to show the most recent files that have been opened. It has only a list of files from when it worked finally. It worked fine for the first two days after I updated. all the solutions to fix it?

    Thank you

    There is a bug in Photoshop 2015.1.1 causes recently opened files not to be registered when after a hundred cases have been opened. According to me, which was corrected in Photoshop 2015.1.2

  • My Firefox has just automatically updated itself to the version 42. The extention under modules page does not display the extensions I have installed.

    My Firefox has just automatically updated itself to the version 42. The extention under modules page does not display the extensions I have installed. The plug in page shows the plug ins I installed. How can I fix it? This happened on my 64 bit Windows 7 partition. I installed the extension "classic add-on" to see if she could solve the problem. There is unfortunately no. I have a screenshot. I'm not sure if I have permission to upload it to the media gallery. I also use Linux, but I did not upgrade that are still there.

    It is possible that there is a problem with the files that store the registry extensions.

    Delete the files (extensions.json, extensions.sqlite, extensions.ini) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.

    New files will be created if necessary.

    See "extension corrupted files:

  • URL address box does not display the current page.

    With the 4.0.1 update, the URL address box does not display the current page.

    All that shows is the text: «Go to web site»

    To now see the url of the current page, you need to make a right click the empty space is the address box and press the button "esc".

    Is there a way to display the url of the current page?

    This problem may be caused by an extension that is not working properly.

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • My selection tool does not display the transformation box?

    I don't know what I did but my selection tool does not display the box of the scale (free transform). I have to continue to use the shortcut of 'e' and it's really annoying advice on how to fix it?

    Thank you!!

    I figured it shift + command + b

    thaks fixes everything!

  • Dreamweaver does not display the images of the root folder

    Dreamweaver does not display the pictures in the folder root in the browser:

    "< a href ="... /... /.. /.. / gen/index.php "> < img src ="... /... /.. ' / gv_logos/gen_logo.png "alt ="Gen"width ="130"height ="60"> < / a >

    "< a href ="... /... /.. /.. / english/mall/home.php "> < img src ="... /... /.. ' / gv_logos/gen_mall_logo.png "alt ="Mall"width ="110"height ="60"> < / a >

    I use Dreamweaver CS6. I checked display > display external file, it is checked. I unchecked it executed the script, still no change.

    I've been in the problem for weeks.

    It's driving me crazy. .

    Thank you all. I finally discovered what the problem was. My ' link to ' was created at the root of the Document.

    For later use, to all those who may have this problem:

    1. Launch Dreamweaver.
    2. Click on "Site" in the top menu.
    3. Select "Manage Sites".
    4. In the 'Manage the Sites' box, select your local site folder. For example, my_new_site
    5. Click on change icon (it's the second icon on the button "Import Site").
    6. The site for my_new_site configuration (for example) is displayed. Now click on "Advanced settings".
    7. Search "link to:" in the options, select 'Site Root '.
    8. Click on 'Save' later, the box disappears.
    9. Click on 'Done'... and you're done!

    You don't need to restart your computer for the settings save constantly. But if that fell safe, Dreamweaver shut down and restart it. All links should display correctly.

    But it is worth mentioning that all of the links in the following format will have to be edited:

    /.../.../main.php

    Just rewrite the link paths not all scripts.

  • My firefox does not display the icon fonts!

    I use fontello.com for my web design project. But recently it does not display the icon.

    and the strange thing is that its OK my Firefox friends and just my PC have the problem.

    for example, this page shows icon on my friends firefox but I can't see the icons
    https://DL.dropboxusercontent.com/u/28793409/fontello-d3b0f38a/demo.html

    That's what I see
    https://DL.dropboxusercontent.com/u/28793409/shot.jpg

    If Safe Mode is good, the more likely culprits are one of your extensions or incompatibility of the graphics driver. To work around the second question, you can disable use of the hardware acceleration Firefox to see if that helps.

    "3-bar" menu button (or tools) > Options > advanced

    In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

    It takes effect the next time you exit and restart Firefox.

  • After installation or upgrade to Firefox 31, starting Firefox does not display the home page, personalize displays a blank page and the radio button does not work

    I am the admin of Windows for a University Department and install PC with Firefox all the time. This problem does not occur with every PC I would maintain, only a selection bit (model different laptops with Windows and update 1 8.1.) Until today, it has happened with the new user (with admin rights) accounts that I place on laptops for our staff. Today, this happened with the account administrator while setting up a new laptop. In all cases so far, I have install Windows from a registered image that was created by using sysprep.

    I tried many suggestions to reset Firefox, removing the profile of Firefox users, removing the Windows profile users, uninstalling/reinstalling Firefox, uninstall/reinstall of Firefox and the latest Java, but nothing helped. After uninstalling, I run an application to delete the caches and temporary files and even remove manually the keys to register HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. I restart and make sure that the installation folder is deleted after uninstalling.

    Results are the same: after installing Firefox 31, the initial settings for migration, IE or Chrome pop up and after having clicked on the button finish, Firefox starts but does not display the home page of the new user, only a blank page. By clicking on the Options (3 bars) button does nothing. Right click in the appropriate box, the shortcut menu appears, so I can choose to customize, but which opens another tab with subject: Customize the URL and the page is blank. In the right click context menu, I can activate the menu bar and get options from that.

    My last attempt helped a little. I uninstalled Firefox 31, cleaned, removed the profile user Firefox, rebooted and then installed Firefox 30. Initial start-up runs and tells me that I'm not up-to-date and the works of button Options. But I can't always customize.

    Then I upgraded to Firefox 31, but then it's back to no start page, no options button and no customization. I can go down to 30 and get customize practically works again.

    Addon only is for McAfee Scriptscan to Firefox 15.1.0, just after installation is disabled.

    Any help would be appreciated. Thank you.

    You can try a different theme of Windows?

    Have you tried to start the computer using Windows safe?

    Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • Windows does not display the CD-ROM drive

    A week ago, my computer stopped showing me an icon for my DVD player. When I go into the Device Manager there is no option for CD/DVD players. I tried Microsoft Fix It, and he told me that there is no CD drive. I can not re - install a driver because the Device Manager does not display the CD players.

    I did not major changes to my computer I know so I can't imagine what the problem is. Help?

    Trevor

    Hello

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================================

    After the foregoing:

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Created using Microsoft keyboard layout creator of keyboard, but after installation does not display the name of my keyboard on language bar on the taskbar

    I created my keyboard with "Microsoft keyboard layout creator v.14" and I create the package. It works fine but does not display the name of my keyboard on the language bar on the taskbar

    Hello

    Follow these steps and check if that helps.

    (a) click Start and type area and the language in the search bar and press to enter.

    (b) go to keyboards and languages tab.

    (c) click on change keyboards.

    (d) now, click Add.

    (e) now under any input language, you have chosen who find and choose keyboard.

    (f) ensure that all options are listed.

    (g) if there is a check mark in the United States remove it and place a check next to the language and click Ok.

    (h) now you can check cross if the preview shows you the correct layout.

  • BlackBerry Tour 9630 smartphones does not display the name of the caller

    Hello

    I have a Tour 9630, version sw 5.0.0.732.  When the phone rings, it does not display the name of the caller, their telephone number, although this number is in my address book.  Once I answer the call, the name will be displayed.

    Naturally, I would like to know who is the caller before I answer!  :-)

    I found a few messages, ask something similar, although for different model phones.  Some of them suggest that I have to disable protection for the content... but I can't find it in the options.  Even in the User Guide, it contains instructions (go to Options > Security Options > General settings... but there is no "General settings" on my phone.)

    If anyone knows how to solve this problem, I would be very grateful!

    Kind regards

    Options > Security > encryption > include contacts.

    There could be other solutions... Try these:

    1. make sure that you set your own country code to the Phone Dialer screen > Options > smart dialing.
    Set your country code in this format: "+ xx" where xx = country code. Some countries have two or three-digit country Codes. Do not place not the '+' in the entrance of your contact.
    * In the United States, the value of this country as '+ 1' Code and place your local area code in the appropriate box (this normally the default setting in a new BB).

    2. in the same place, change the length of National number for the number of digits corresponding to your country (since some countries have less than 10 as that set by default in the BB). Check out the total numbers, less country code. Do not place not the '+' in the entrance of your contact.
    * For example, some countries have a total number to 8 (more than 3 for the country code). You must enter '8 '.

  • ADF table selected displayRow does not display the selected line

    Hello

    JDev 11.1.2.4

    I have a table with selection enabled and displayRow property the value selected. In the workflow, I have an ExecuteWithParams activity, and then a method activity that restores the current iterator of the line. Finally the activity view that displays the table.

    Restore the current line with key

    Iterator DCIteratorBinding = ADFUtils.findIterator ("MyIterator");

    iterator.setCurrentRowWithKey (currentKey); currentKey is a string

    The question I have is that the current line is properly restored, but the table does not display the page of "range" of the current line while the displayRow is the selected value. My table has 500 rows, the table displays the top 25 while the current line is the 500th line. I expect the table to display the line 475 to 500 line.

    What I am doing wrong?

    Thank you

    You can save the index lines before executing your method and then set the iterator to this index.

    The technique is described in this blog https://tompeez.wordpress.com/2016/02/12/naviagting-an-aftable-in-pagination-mode-from-a-bean/

    Timo

  • How to print a selection of an image in photoshop CC, I have problems because in the print window does not display the full image and the printed only a section of what I SELECTED

    How to print a selection of an image in photoshop CC, I have problems because in the print window does not display the full image and the printed only a section of what I SELECTED

    Hi jodepepevalentin,

    In the print menu, check "scale to fit media" under the Position and size of the device and then check out.

    If you want the area selected for printing, check "Print selected area" under the Position and size and specify the size.

    Kind regards

    Claes

  • my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?

    my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?

    Hello

    Follow the instructions here:

    If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

  • When I open a link in a new window does not display the web address.

    When I open a link in a new window does not display the web address. What have I done wrong? It used to work and it works if I open the link in a new tab, the problem is that I hate to use tabs prefer a new window every time... Help!

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

Maybe you are looking for