Save problem

Similar Questions

• Re: Win7 save problem

  I have problem with the safte save mod!
  were errors in (0 x 80070057).
  Sharp problem wan Ich habe ich will save machen!

  To be honest I don t understand your problem at all, and all we can do now is to use the error message and check in Google what it can be. Can you post the exact error message or try to explain when this error message occurs?
  You can do it as well.

  Have you ever tried Googling autour solution?

  Something like:
  http://support.Microsoft.com/kb/982736

• NB205-N210 Power Saver problem

  Hello!

  Im having an error during the installation of the Power Saver software.
  I have Win XP SP3 (Hungarian) and when I try to install the software, it gives me this message:
  "1628: scenario based Setup fails.

  I read after that, and they say "Idriver.exe" commits the error, I tried to turn it off, but I can't
  Can someone help me know how to install this essential part of the software for my netbook, with her dough last only for about 3-4 hours (instead of 7-9)?
  Thank you very much in foreword!

  Invites you to the Microsoft Knowledge base:

  Method 10
  If you get the error message "Error 1628: impossible to install complete based on the script.
  And followed the instructions above and it didn t determine the problem and you just create fees
  installation package by using the InstallShield tool, please disable "Cache installation on the local computer.
  option during the installation package creates the process.
  Link http://support.microsoft.com/kb/555175

  So maybe it has something to do with temporary files.
  Go to c:\documents and settings\ [your name] Settings\Temp
  and delete all the files in there (close all other programs first, or do in Mode without failure).

  Also try disabling your Antivirus software. They can sometimes block facilities.

• Tecra A4 (PT40E): Power Saver problem

  When I close the lid, it prepares for sleep.
  Used to work properly. Now it closes all applications and crashes.
  The powersave icon does not appear in the sys tray.

  I have updated Bios 1.7 but which gave intermittent starting problems.
  Now back to bios 1.2
  All original drivers and utilities resettled.

  Thank you!

  After installing SP3, anything is possible. As much as I know Toshiba does not updates, tools and utilities for SP3. So in your case, you have two options: use all the stuff from Toshiba with SP2, because tools and utilities are tested with SP2, or remove the system energy saving.

  I'm sure that you can live without energy saver. Am I right about that?

• Loops and save problems

  Hey,.

  I'm having a problem backing up my data. I have a program that simulates a tap. Essentially a certain tension will trigger the data to collect. To present to all members of this forum, I just faked this effect. If the button is on then it pseudo randomly triggered the first inside the loop.

  Here begins the problem. When the first inside the loop is triggered, the charts show the resulting data and a box pop up asking if you want to save this data. Well this time I click Yes it will not save. Then the next time, the first inside the loop is triggered the record dialog box is displayed to save the current data. It's really weird. If you want to see what I'm talking about consolidated please run the program and click Yes, you want to save a couple of times and I think that you begin to understand my problem.

  Essentially, I want to be able to see the results of the data and decide whether I want to save. If I choose Yes, then I want to quote the path of the file.

  I looked at this for hours and can't come to a conclusion, why this is happening. Maybe a problem of flow or the loop?

  Please note that the outer loop must always be to keep the ongoing program.

  Thanks for any help on this

  Thank you very much! has worked like a charm. Don't know why I didn't sooner.

• Windows 7 screen saver problems

  My screen saver does not work correctly. After I got the settings, the saver will start and run for a few moments and close. A while later it will restart and stop again. It could be hours before it starts again. I have reset all settings several times screensaver, and again, I have problems with it working properly.

  Maybe things can stop a screen saver

  Just to name a few.

  Update of security suite / a keyboard or a mouse too sensitive wireless...

• Character animation save problem

  I am doing a project to host character and save it to the desktop. When I reopen it the project, that it's all confused and my work cannot be reproduced. I'm running on a MAc Book Pro Power. Any ideas what the problem might be?

  [Moved from After Effects to Character Animator - Mod]

  I think choose media gather before closing will help keep all links from local media and works on any system you open on (I had this problem when file sharing with someone else and the fixed gathering).

• Auto save problem

  First 5.5

  I got my self entity to 50 versions of backup at 5 min intervals and I find when the auto record number reached 50 more early for those who are not replaced. The program always comes up with 'save project' every 5 minutes, but I can't find where it is they save (or even at all). I just noticed this problem (after a premature crash). A couple of months a go, I did a reinstall of Win 7 and 5.5 production premimum, I don't have this problem when I had only 5.5 installed first. Any thoughts...

  RMK

  Look at the Date of modification.  This will give you the most common auto save.

• Word 2007 to save problem

  When I go to save a Word Document in Word 2007, navigate to where I want to save the document via the check-in box and the only thing that appear in this place are the folders, even though I know that there are already other Word documents at this location. I do not use the generic location of My Documents XP, but when I did it with Word 2003 Word documents, but also records would be present. I really need to see these documents pre-existingWord I save everything new, because these are numbered files and I need to know what number to save this last Word doc as... I hope that this explanation makes sense, thank you for your time of Pedro.

  As you know, Microsoft has changed the format of the Office between Office 2003 and Office 2007 files.  These formats are not compatible with each other - but new versions of Office programs can read, edit and save files in the old version if you wish.  Older versions of Office programs need the installation of free "Office Compatibility Pack" to treat the files saved in the new format.

  Most recent format files have an x at the end of the file name extension, as in document.docx or spreadsheet.xlsx

  See http://office.microsoft.com/en-us/help/introduction-to-new-file-name-extensions-HA010006935.aspx

  If you look carefully at the dialog box "save under", you will notice that located under the box 'File name' is a box of "Save as type".  By default, the new versions of Word and Excel defined the 'Save as type' to the new format, that is, "(*.docx) Word document" or "Excel workbook (*.xlsx).  The files listed in the dialog box are files that are the same as the "Save as type".

  Thus, if you want to see your old Word documents in the dialog box, change the "Save as type" to "Word 97-2003 document (* .doc).

  But beware: Word 2007 (or Excel 2007) saves the file in the format that you specify, so be sure that you specify a format you want.

• Screen saver problems

  Any suggestions on why the screen saver does not work?  I've set up and he will be seen, but it does not start.

  This article could be applied.

  The screen saver does not work when you use a pointing device Microsoft Wireless on a Windows Vista-based computer:
  http://support.Microsoft.com/kb/911895
  Ramesh Srinivasan, Microsoft MVP

• Cannot save problem

  Hello

  I come to you because find it me impossible to save UN document in the design. This document has been saved previously. But since I've started working on it I can not select Save or even save under (same for archive, etc.). So I have full assessment which are not accessible to me, even cancel in the edition menu.

  The document probably remained open when my computer was in sleep mode and now I have to do this every time.

  Would you have an idea or even a solution pour so I can save it?

  Kind regards

  What version of InDesign? Obviously, this happens on CC. There are number of United Nations good posts on this topic. It seems that the only solution is to record en .idml and then reopen the file.

• Photoshop CS6 save problem

  Hello

  I have master CS6 on Mac Pro and I'm struggling to save the photo in JPG format, it seems, there is no option to save the JPG, GIF or PNG - and even save it for the web is grayed out. How can I fix? I would like to save in the formats listed as default value. Why is that saves it to PSD, rather?

  Thank you very much

  Trying to convert to a depth of 8 bits. It works now?

  Good luck

  Hunt

• Q - Slideshow Screen Saver problem (s)

  # 3 http://forums.adobe.com/thread/565239?tstart=0 here I describe the components I just used to build a new computer for my wife... to display the key points being a motherboard ASUS and ATI video card... the two are, as far as I know, very good brands

  Using WinXP Pro, with all updates from MS, I have a problem with the built-in slideshow screensaver

  Sometimes it starts not at all and other times it starts and stops after a few photos... He showed up in his Kodak pictures directory, which has 2-3 dozen of subdirectories and (I guess here) more than a thousand JPG images (can be a GIF or TIF once in a while, but above all to JPG)

  Anyone know about the inner workings of the WinXP slideshow screensaver?

  Are there too many pictures and it gets confused and won't start or continue to run?

  She REALLY likes to have a slide show as screensaver, and I can't understand why one that comes with Windows XP does not

  When I finally build an i7 computer, I think I'll keep silent as relative velocities

  Probably a wise move!

  Good luck

  Hunt

• Data updates to blackBerry Smartphones Software save problems

  Hello

  So I just have to update my 9360 on what I think is 7.1

  After I deleted the unused languages and created the space for it, the phone started a data back up but when he got 15% it just stopped and didn't moved, I left it all night (so about 4hrs) and still nothing, so I turned it off and took out the battery. I put it put it back and the rear market began again, but this time it at 8% and stopped, let him all night but nothing.

  Any ideas? Because the phone is unusable until it is finished. Oh and also, I tried to plug it in my computer to updatethrough software, but of course it does not connect

  Thank you, Tim

  No idea how, but this morning he has completed the update. All sorted! Cheers!

• Problems with games and screensaver to display.

  Original title: games/screen saver problems

  Now, I have 2 inch black strips each side of my screen saver and Steam games and cannot get back them full-screen format.

  Hello

  Have you tried the advice given bu Akil P in the previous post? If so, please post back with the results to help you further.