Save the changes to the input parameters of circle finder

Similar Questions

• Save the input of the meter against the clock data

  Hello, I would like to know about recording by using an entry in the file of the measure.
  When I record a given as analog inputs, to save the file with display analog data against the clock.
  But when I tried to applied the encoder, which uses counter entries, in the .txt file are not displayed
  the result in the form of analog input. If anyone can give me a guide on what writing to measument setting
  file to measure the revolution per minute is against time, thank you

  
  

• problem with pipe separated from the input parameters to call

  Hi all
  
  I have a requirment as...
  
  I have a Sp 10 which have 3 SETTINGS and 3 settings as shown below...
  
  
  PROCEDURE sample_sp1 (p_start_dt IN VARCHAR2,
  p_end_dt IN VARCHAR2,
  p_shift IN varchar2,
  p_out1 OUT t_bpd_nm, - array type
  p_out2 OUT t_target, - array type
  p_out3 to t_drr); -type of array
  
  
  
  PROCEDURE sample_sp2 (p_start_dt IN VARCHAR2,
  p_end_dt IN VARCHAR2,
  p_shift IN varchar2,
  p_out1 OUT t_bpd_nm, - array type
  p_out2 OUT t_target, - array type
  p_out3 to t_drr); -type of array
  
  
  
  .........
  
  
  ..........
  
  
  PROCEDURE sample_sp10 (p_start_dt IN VARCHAR2,
  p_end_dt IN VARCHAR2,
  p_shift IN varchar2,
  p_out1 OUT t_bpd_nm, - array type
  p_out2 OUT t_target, - array type
  p_out3 to t_drr); -type of array
  
  
  
  
  
  
  Now, I have to create a new SP. This SP, I have to call one of the top 10 SP and have to come back as a REF CURSOR.
  
  
  the entries to the new MS are 3 as... (shown below).
  
  
  create or replace new_sp (p_report_name IN varchar2,
  p_report_inputs IN varchar2,
  p_report_as_ref to ref_cur_type) is
  
  
  ..............
  
  where p_report_name is a name of sp
  p_report_inputs is the input to SP parameters with "|" separated pipes (ex: ' 23/04/2010 | 20/05/2010 | 2 ')
  p_report_as_ref is setting to return as an OUT refcursor.
  
  
  I'm unable to manage the setting shild (with tickets). How to separate input parameters and how can I call existing SP
  with these settings?
  
  
  friends... can someone help me please...
  
  
  Thanks in advance...

  What of it?

  with t as
  (select replace('500 Oracle Parkway| Redwood Shores| CA','|',',') str from dual)
  SELECT
    replace(REGEXP_SUBSTR(str,'[^,]+,'),',') first,
    replace(REGEXP_SUBSTR(str,',[^,]+',1,1),',') second,
    replace(REGEXP_SUBSTR(str,',[^,]+',1,2),',') third
    FROM t;
  
  ----
  500 Oracle Parkway      Redwood Shores      CA
  

• Call the base-dos .exe file, but how the input parameters and get the text on the screen of the BACK?

  Yes, I tried the similar topic before posting about this.

  I understand that we can use standard input of entrance of parameters of the System exec.vi, but still can not find an answer on "how to get the text on the screen of the BACK.

  1 seal of sw500912_2701test.exe is the exe of Basic-back , (change to rar .tar)

  2. double-click on the .exe, run this file. The first parameter is the rate band, the default value is 9600.

  

  3. setting the COM #.

  3.

  Can be useful to check that the command is actually being run. When the dos window opens is there any text?

  Try cmd /c "."

• [ADF, JDev12.1.3] Page of the input parameters: 1) expression for a value of type enum? (2) can they be used to initialize CIU?

  Hallo,

  I have a backingBean extended myBean bean 'associate' to a page fragment used in a stubborn workflow.

  I want to declare to the fragment in the settings of btf 2 who have a fixed value. Their values should be copied in 2 myBeanattributes.

  An attribute is Boolean, and I guess it does not give any problem, but the other is to an enum type that is defined in the myBean bean itself.

  I have to write in "value *" pass the enum value to var enum in myBean?

  

  And if the "value *" have been a public static final string of a Java class in the application Module which expression I should use?

  I would like to use parameters of entry Page to initialize (hide, show,...) in myBean some component of the user interface in the page fragment? Is this possible without intervention in any problem? Can kindlu give you some tips to achieve this?

  Thank you

  Federico

  It also works with range backingBean?

  I don't know (I just created a few vars inside managed bean in my application of playground).

  The fragment contains a search with table form and it's always the same, whereas the bean (containing the search called action when the user clicks on the button 'Search') should take the page settings to compose the search query according to them.

  Yes, but that are not exactly 'page settings' because you retrieve the values of the url of the page, right?

  In conclusion, the problem is that I should switch to the different settings depending on the btf bean where the fragment is used.

  You have a better idea to achieve this?

  Then why you are not using the BTF settings (they will be in pageFlowScope)

  Dario

• the input parameters for the transitions

  Hi guys,.

  During the last two weeks I've come a long way to build my own custom transitions.

  Now I want my plugins have enter parameters such as: sliders, swatches, boxes and option/Pulldown menus, text boxes.

  The question is: How do I ? And how do I get access to these settings.

  The SDK example for the "simple video filter" doesn't seem to be compatible for a transition.

  And it also raises questions:

  If you would have to enter some parameters like this:

  paramsH = (filterParamsH)(*theData)->specsHandle;

  () csSDK_uint32) (* paramsH)-> color

  If you did, how you can access a shild pipette?

  So many questions, but probably so simple to do.

  Who can help out me?

  See you soon,.

  Jaap

  Hi Jaap,

  Great to hear that you are on the right track.  The transitional API does not offer many types of control integrated setting, compared to the API filter which has a little more and the effect of After Effects, which is very flexible API.  To add other parameters beyond the basic ones you see in the built-in Iris or a wipe transition, you will need your own modal dialog box installation using standard operating system calls.  Chained SDK sample displays a custom button that appears then a MessageBox based on Win or dialog box alerts under Mac.  It is the starting point for a Custom Installation dialog box.

  Kind regards

  Zac

• Added to Premiere Pro 2.0 for my laptop and it will not save the program and can't find a burner

  I need help.

  IM install Premiere Pro 2.0 educational Version on my new laptop (I work at the school) and it will not register the program.  Appellant tried the number and he said to come on this forum.  I bought this program nearly 10 years ago because I'm responsible for all the dvd for our benchmarks.  I have in my office and it works very well but does not work in my laptop.  I moved and put five or six videos in there but it does not recognize a dvd burner installed.  Is it because its not saved and must be registered before you can use the burner?  I tried to put this program in my laptop and it does not work there either.  Can you get it someone please let me know what to do.  It is an update of this program being 10 years old, or I buy a latest software?  Thank you

  Larry

  You can not activate PP2 more.

  Follow the instructions in the link and you will be up and running in no time.

  Error: Unavailable activation server | CS2, Acrobat 7, pass a hearing 3

• How to get the value of the predefined list of input parameters of a workflow of another workflow of operation REMAINS (element JSON) output. The pointers or the exisitng resource/code will be of great help

  I have a workflow in which one of the input parameters is a predefined list of element. The predefined list of items must come from another workflow of operation REMAINS to GET type (element JSON) output.

  You just wrap it in an action that has an output which is an array of the same type as input.  Instead of using the plugin of rest, you might be able to use the scriptable Url to take the exit that would work according to the rest interface with which you interact.  Something like this:

  var restOperation = 'yourrestservice.com/resoperation/... '. ' / / whatever your full url is if it requires no authentication

  var myUrl = new URL (restOperation); Create the object URL

  var result = myUrl.getContent (); get the content

  var jsonParsed = JSON.parse (result); assuming that the result is a string that must be converted to an

  treatment jsonParsed and return an array of the appropriate type

  return (myPreDefinedList);

• Duplication of datasets based on input parameters

  I posted this question in the context of the reports of the Oracle, but I think that this is not really a question of relationship Oracle, its more a matter of SQL. I'm on Oracle 9i.
  
  I need to generate a report based on a maximum of 6 input parameters.
  Three of them belong to the client ID # and 3 belong to the Number of Copies that must be printed on the report.
  Settings on clients: P_CUST_ID1, P_CUST_ID2, P_CUST_ID3
  Parameters for the number of copies: P_N1, P_N2, P_N3
  
  So, at some point, there could be a maximum of 3 Customer ID passed to the main request. Here is an example of what might look like the input parameters.
  The user has chosen to enter the values for Customer ID 1 and 2 and left blank for 3 client.
  

  Customer ID1   1001         Number of Copies   2
  Customer ID2   1002         Number of Copies   3
  Customer ID3   ----         Number of Copies   -

  The query that retrieves data looks something like this. The query below is intended to get the client host and addresses of the Office.
  Of course, it is possible that there could be no home or office address or both.
  

  SELECT    c.cust_no,
            c.saln||c.first_name||' '||c.last_name cust_name,
            a.address_type,
            a.street,
            a.city||' '||a.province||' '||a.postal_code city,
            '('||a.tel_area||') '||a.tel_number telephone
  FROM      customer c, customer_address a
  WHERE     c.cust_no = a.cust_no
  AND       c.cust_no IN (:P_CUST_ID1, :P_CUST_ID2, :P_CUST_ID3);

  Based on my query:
  Customer ID 1001 has 3 addresses (House 2 and 1 office)-> the Total number of records = 3
  Customer ID 1002 a 2 addresses (1 House and 1 office)-> the Total number of records = 2
  
  The output should be something like that. I put a copy1 copy2, Copy3 label to show
  How the data will appear for readability.
  

  Cust No Customer Name      Address Type    Address Line 1         Address Line 2        Telephone
  -----------------------------------------------------------------------------------------------------
  Copy1
  1001    Mr Robert Green    H               2100 Picket Fences     Vancouver BC V6E 2C9 (604)726-5555
  1001    Mr Robert Green    H               2300 Happy Valley      Vancouver BC V6G 2N8 (604)308-5555
  1001    Mr Robert Green    O               1200 Davie Street      Vancouver BC V1V 1X1 (604)211-5555
  Copy2
  1001    Mr Robert Green    H               2100 Picket Fences     Vancouver BC V6E 2C9 (604)726-5555
  1001    Mr Robert Green    H               2300 Happy Valley      Vancouver BC V6G 2N8 (604)308-5555
  1001    Mr Robert Green    O               1200 Davie Street      Vancouver BC V1V 1X1 (604)211-5555
   
  Copy1
  1002    Ms Cynthia Brown   H               261 King Street W      Calgary AB M5A 1N1   (416)432-5555
  1002    Ms Cynthia Brown   O               150 Bloor St W         Calgary AB M1W 1S3   (416)321-5555
  Copy2
  1002    Ms Cynthia Brown   H               261 King Street W      Calgary AB M5A 1N1   (416)432-5555
  1002    Ms Cynthia Brown   O               150 Bloor St W         Calgary AB M1W 1S3   (416)321-5555
  Copy3
  1002    Ms Cynthia Brown   H               261 King Street W      Calgary AB M5A 1N1   (416)432-5555
  1002    Ms Cynthia Brown   O               150 Bloor St W         Calgary AB M1W 1S3   (416)321-5555

  Scripts for creating the table and INSERTs
  

  CREATE TABLE CUSTOMER
    (
      "CUST_NO"    VARCHAR2(4 BYTE) NOT NULL,
      "SALN"       VARCHAR2(4 BYTE),
      "FIRST_NAME" VARCHAR2(20 BYTE),
      "LAST_NAME"  VARCHAR2(20 BYTE),
      CONSTRAINT "CUSTOMER_PK" PRIMARY KEY ("CUST_NO")
    );
   
  Insert into CUSTOMER values ('1001','Mr','Robert','Green');
  Insert into CUSTOMER values ('1002','Ms','Cynthia','Brown');
  Insert into CUSTOMER values ('1003','Dr','David','Taylor');
   
  CREATE TABLE CUSTOMER_ADDRESS
    (
      "CUST_NO"      VARCHAR2(4 BYTE) NOT NULL ENABLE,
      "ADDRESS_TYPE" VARCHAR2(1 BYTE) NOT NULL ENABLE,
      "STREET"       VARCHAR2(20 BYTE),
      "CITY"         VARCHAR2(20 BYTE),
      "PROVINCE"     VARCHAR2(2 BYTE),
      "POSTAL_CODE"  VARCHAR2(10 BYTE),
      "TEL_AREA"     VARCHAR2(3 BYTE),
      "TEL_NUMBER"   VARCHAR2(10 BYTE)
    );
   
  Insert into CUSTOMER_ADDRESS values ('1001','H','2100 Picket Fences','Vancouver','BC','V6E 2C9','604','726-5555');
  Insert into CUSTOMER_ADDRESS values ('1001','H','2300 Happy Valley','Vancouver','BC','V6G 2N8','604','308-5555');
  Insert into CUSTOMER_ADDRESS values ('1001','O','1200 Davie Street','Vancouver','BC','V1V 1X1','604','211-5555');
  Insert into CUSTOMER_ADDRESS values ('1002','H','261 King Street W','Calgary','AB','M5A 1N1','416','432-5555');
  Insert into CUSTOMER_ADDRESS values ('1002','O','150 Bloor St W','Calgary','AB','M1W 1S3','416','321-5555');
  Insert into CUSTOMER_ADDRESS values ('1003','O','435 Richmond Street','Calgary','AB','M5A 4T6','416','453-5555');

  Any help or pointers in this regard would be great.
  I could have adopted a procedure for use of temporary tables , but I really prefer not to go in that direction that there could a few reports which must be generated in this way.
  
  Thanks and a great weekend.

  Hello

  Roxyrollers wrote:
  I tried to replace the Clause WITH with views online, but have hit a wall. Of course, it is said Table or view does not exist because it cannot find the report_parameters table. Also, I realize that I can't really get the view online at the same level.

  No, report_parameters is used in two places in the solution I posted Saturday. You could code 2 copies of the report_parameters (one inside the cntr, the other to join it), but it should really be. CNTR can rely on two instead, like this:

  SELECT    c.cust_no,
            c.saln ||c.first_name||' '||c.last_name cust_name,
            a.address_type,
            a.street,
            a.city||' '||a.province||' '||a.postal_code city,
            '('||a.tel_area||') '||a.tel_number telephone
  ,       t.n                -- If wanted
  FROM      customer           c
  ,        customer_address   a
  ,       (               -- Begin in-line view report_parameters
              SELECT  :p_cust_no_1 AS cust_no, :p_no_copies_1 AS no_copies  FROM dual  UNION ALL
            SELECT  :p_cust_no_2 AS cust_no, :p_no_copies_2 AS no_copies  FROM dual  UNION ALL
            SELECT  :p_cust_no_3 AS cust_no, :p_no_copies_3 AS no_copies  FROM dual
         )  p               -- End in-line view report_parameters
  ,       (               -- Begin in-linve view cntr
               SELECT     LEVEL     AS n
               FROM     dual
               CONNECT BY     LEVEL     <= GREATEST (:p_no_copies_1, :p_no_copies_2, :p_no_copies_3)
         ) t                    -- End in-line view cntr
  WHERE     c.cust_no           = a.cust_no
  AND       c.cust_no           = p.cust_no
  AND       p.no_copies          >= t.n
  ORDER BY  c.cust_no
  ,       t.n
  ,            a.address_type
  ;
  

  Ensure that: p_no_copies_1,: p_no_copies_2 and: p_no_copies_3 are not NULL; otherwise, GREATEST return the NULL value. Check the settings, you do need lower or equal to 0, or use NVL inside the GREATER expression.

• Run javascript with a taskflow input parameters

  With the help of PS4 11 g JDev
  
  I have a taskflow using javascript. When the taskflow was loaded, I need to execute a javascript function that uses my taskflow 2 input parameters.
  I don't really know how I can run javascript with my input parameters.
  
  A test, I added a commandButton control in my taskflow who will do the job:
  

  <af:commandButton id="btnRefresh" text="Open">
              <af:clientAttribute name="long" value="#{pageFlowScope.pLong}"/> 
              <af:clientAttribute name="lat" value="#{pageFlowScope.pLat}"/> 
              <af:clientListener method="doNavigate" type="click"/> 
          </af:commandButton>

  How can I do the same thing when the taskflow charge instead of having to press the button.

  Please find attached examples based on your use cases:
  http://adfsampleapplications.googlecode.com/svn/trunk/JavascriptOnLoadSample.rar

  She calls a javascript function when loading pagefragment passing the input parameters of the taskflow.

  Thank you
  Nini

• Input parameters of Report Builder

  I need to create a report using the input parameters and a date range. I called the report in a form that uses the following query and gets his entry to a previous form:
  
  < cfquery name = "getVisitors" datasource = "zipcodesearch" >
  SELECT company.CompanyID, company.CompanyName, company.phone1, visitors.visitorName, visitors.visitorComp, visitors.createDate, visitors.phone, visitors.email
  The COMPANY INNER JOIN visitors ON company.CompanyID = visitors.companyID
  WHERE visitors.createDate > = #form.startdate # and visitors.createDate < = #form.enddate #.
  ORDER BY company.CompanyName, company.phone1, visitors.createDate
  < / cfquery >
  
  At this point, I'm not sure if I should use cfreportparam tags or not. The reason is, I'm not using the = operator. I need to specify a range of dates, and I can't find an example ANYWHERE on how to achieve this with the report generator. If I use the cf report param tags, they would present something like that? :
  
  "< cfreport format ="PDF"template ="visitors.cfr"query =" #getVisitors # "overwrite ="yes">
  < cfreportparam NAME = "startdate" VALUE = "#form.startdate #" >
  < cfreportparam NAME = "enddate" VALUE = "#form.enddate #" >
  < / cfreport >
  
  Guess my next question is, should I I then specify a query in Report Builder and also use input parameters in report designer environment? the documentation on this type of scenario was virtually nonexistent.
  
  I'm really stuck on this one, and any help would be appreciated...

  I thought about it and answer my own post in case anyone else runs into the same type of situation...

  The formula of entry consists of two fields: StartDate and EndDate

  The action page consists of a query as follows:
  
  

  
  SELECT company.CompanyID, company.CompanyName, company.phone1, visitors.visitorName, visitors.visitorComp, visitors.createDate, visitors.phone, visitors.email
  The COMPANY INNER JOIN visitors ON company.CompanyID = visitors.companyID
  WHERE visitors.createDate > = #FROMDATE # and visitors.createDate<>
  ORDER BY company.CompanyName, company.phone1, visitors.createDate
  

  .. .and the code generator of report:
  
  

  No record date (s) selected.
  

  Close the window
  
  
  
  
  
  

  Also, I removed the underlying query in the report generator program and am only using the query on the page of ColdFusion itself. Everything seems to work properly, so I'll put this down as the answer.

• Timed Access - won't save the changes of time

  I am using access delayed for several years.  It worked great until today.  When I try to change the time settings, it seems to work.  For example, I got our xbox set to turn off at 11:30.  I changed it at 23:31.  I hit 'Fact' several times until you are prompted to update.  It seemed to work - I even went back to check.  But then less than a minute later she came back both previous.  I use an AirPort Extreme and just updated to 7.7.7.  I also expanded the network by using an Airport Express, which has the same parameters of time on it.  I tried to time changes using AirPort Utility on my iPhone and on my Windows PC.

  Two options that have both worked for me:

  1) return to 7.7.3 firmware

  (2) keep installed 7.7.7 and delete all the access settings timed, updated to save installation and let AirPort Extreme will restart. Then enter the settings again.

  Can't tell if it will work for you, however.  Good luck if you want to try it. Keep the Express turned off until you have AirPort Extreme up and running properly. Then, turn on the Express.

• Cannot save the settings in "text Services and input languages".

  I have "English (US)" installed and set as default and "Japanese (Japan), keyboard (MS IME)" and "Chinese (Simplified) - Microsoft Pinyin IME" installed under my keyboard services.

  Under "Text Services and input languages" on the tab "Advanced key settings", I have a 2 key enabled parameters. "Between the input languages" left alt + Shift and 'Chinese (Simplified) IME - Ime/NonIme turn' set to Ctrl + space

  I can't remove it. I apply every time, it just sets back to Ctrl + SPACEBAR again. I do not have this shortcut, but I don't want to uninstall my Chinese typing function.

  This seems to be a problem that affects many users, but still not fixed after years. Do you have any solutions?

  I found a registry tweak on a Chinese website. Basically:

  under HKEY_CURRENT_USER Control Panel input method hot keys 0000010 keys control,

  02c 00000, Ctrl-space,

  I changed it to 06C 00000, which means Ctrl - Shift - space.

  I don't know if the other numbers mean other combinations or how to find out. But it suits it. (requires restart).

• Input parameters of the task flow and "back" button

  Hello experts. I have two stubborn workflow created by page; say they are TF1 and TF2. Each workflow task has their own controlled beans. These controlled beans are kept in the Page flow scope. The two task-flow has their own of initializers.

  By an action on TF1, I redirect to the TF2. During this redirection, I pass some parameters. After redirection when it enters the TF2, I extract the parameters programmatically. Now I'm back on TF1 and TF2 of TF1, I'm clicking on the back button of the browser. Note that I put anything if the re-entry allowed or not in TF2. After clicking the browser back button access me for the new TF2. TF2 called if I generate any action of the initializer. BUT now I can not get the input parameter values more. All values in the set of input null parameter.

  My question is:

  • Why have defined null values?
  • How can I make persistent values?

  Any pointer would be very useful.

  I use JDeveloper 11.1.1.6.0, WebLogic 10.3.5.

  Thanks in advance.

  Tapas

  There is a way. Click on "back" button is not invoke the lifecycle JSF and browser displays the previous pages in its cache. If somehow, I can say browser not to cache the page, then every time a click the back or next button, the browser would GET the page headed from the server, which would eventually be my.

  So I added a filter to achieve this:

  public class NoCacheFilter implements Filter {
      @SuppressWarnings("unused")
    private FilterConfig _filterConfig = null;
  
      public void init(FilterConfig filterConfig) throws ServletException {
          _filterConfig = filterConfig;
      }
  
      public void destroy() {
          _filterConfig = null;
      }
  
      public void doFilter(ServletRequest request, ServletResponse response, FilterChain chain) throws IOException, ServletException {
          HttpServletResponse servletResponse = (HttpServletResponse) response;
          servletResponse.setHeader("Cache-Control","no-cache, no-store, must-revalidate, private, max-stale=0, post-check=0, pre-check=0");
          servletResponse.setHeader("Pragma", "no-cache");
          servletResponse.setHeader("Expires", "Sun, 16 Dec 1984 07:48:00 GMT");
          chain.doFilter(request, response);
      }
  }
  

  Note that I have to specify browser to cache resources, I do R & D to change this filter.

  It works. Hope, now I can spend my weekend peacefully :-).

  Ref:

  • http://StackOverflow.com/questions/8062267/browser-back-ViewScope-beans
  • http://StackOverflow.com/questions/49547/making-sure-a-Web-page-is-not-cached-across-all-browsers

  Tapas

• Get the message "do you want to save the changes you made?

  Hi all
  
  I activated the zoom for the standard form of profiles (applications developer) open a new custom form that is used to enter additional information for profiles.
  Two fields profile option id and the profile on the new form option name should get the value in the calling form. Based on these values the new form should show the custom intermediate table data if the record exists.
  If there is no data in this profile of the user must be able to enter information and create new record and commit to the DB table.
  If there is data in the file should be displayed and if the user updates of any field, you have to refresh the record in the DB table.
  I created two new parameters in the new profile_option_id and profile_option_name form which gets its value from the calling form through the custom.pll changes.
  Now, when the new form opens, I see the 2 default fields. But it pops up the message "do you want to save the changes you made?
  If I say no, then the data are displayed for the existing record. If I click Cancel, and then nothing happens.
  Please help me to understand the reason for the pop-up message when the form is opened.
  I changed only a TIME-NEW-FORM-INSTANCE trigger to the new form.
  
  Start
  If (: parameter.profile_option_id is not null) and (: parameter.profile_option_name is not null)
  then
  set_block_property ('NAPP_USR_PRF_OPTIONS_TBL', DEFAULT_WHERE, 'profile_option_id =' |: parameter.profile_option_id |) "(ET profile_option_name = ''' ||: parameter.profile_option_name || ''');"
  : NAPP_USR_PRF_OPTIONS_TBL.profile_option_id: =: parameter.profile_option_id;
  : NAPP_USR_PRF_OPTIONS_TBL.profile_option_name: =: parameter.profile_option_name;
  end if;
  GO_BLOCK ('NAPP_USR_PRF_OPTIONS_TBL');
  execute_query();
  end;
  
  I use form 10g and DB version is 11.2.0.2.0
  
  Thank you
  Chrystel

  Hi Olivier,.

  : NAPP_USR_PRF_OPTIONS_TBL.profile_option_id: =: parameter.profile_option_id;
  : NAPP_USR_PRF_OPTIONS_TBL.profile_option_name: =: parameter.profile_option_name;

  GO_BLOCK ('NAPP_USR_PRF_OPTIONS_TBL');
  execute_query();

  After having assigned the value in any field and then using exectue_query triggers the message.
  If option 1 is...
  If you need to assign then first use execute_query; then assign a value

  Option 2 is...
  Use commit_form and then use execute_query;

  I hope this helps...

  Hamid