Save the Images in the Clipboard of Microsoft LifeCam

Similar Questions

• Error message "error unexpected-go to support kb/etc/95361 the installation of Microsoft LifeCam 3.0.

  Original title: Microsoft LifeCam 3.0.

  XP Home edition; Installation generates "error unexpected-go to support kb/etc/95361. Carried out each of the 5 steps suggested less 95361 listing. without result, to return to the same 95361 message each time.

  Hi AdrianDowning,

  I recommend contacting Microsoft hardware supports assistance.

  
  Reference:

  Troubleshooting

  Hope the helps of information.

• How to enlarge the display of the window for Microsoft LifeCam 3.5?

  When I open the program, the expanded window is only about 5 x 8 "and the display of the actual image is only 1.5 x 1.75".

  I was unable to discover any help to solve this problem.  I'm sure that it's simple, but I can't understand it.

  Hello Janet,.

   

  Don't troubleshoot bad or no video or problems to start the LifeCam software:

  http://support.Microsoft.com/kb/933310

  If you have any questions about Microsoft Harwares, please click this link:

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  I hope this information helps!

• Impossible to install the software for Microsoft LifeCam Vx-800 on Windows Vista

  I can't install my product. I check in every folder in my computer, after I plug the LifeCam and it still does not appear.

  Hello

  I suggest you read the following article and check if this solves the problem.
  
  Troubleshoot failures to find the new LifeCam hardware.
  http://support.Microsoft.com/kb/929087
  WARNING:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows
   
   
  I hope this helps.
   

• Impossible to install the software for microsoft lifecam cinema 3

  I can't get the software to install.  Abandonment keeps telling me that there is another incomplete installation pending.  Here's the exact message:

  Setup cannot continue because another installation is already in progress.

  I don't have any other facilities pending.  I rebooted and rebooted several times.   Using Vista.  The unit works fine, but I don't have the software to do things with him cool because I can't seem to install.  And I can't contact the Microsoft support because I can not find the product ID number anywhere.  Very frustrating.

  • What you have already tried to solve the problem

  Hello crazypokemon,

  Thanks for posting on the Microsoft answers Forums.

  Sometimes computers do not always perfectly work as expected, and we need to make changes to get the equipment to work.

  Since you get an error message when you try to install the Lifecam software and States error installation is already in progress, I would like to use the Windows Installer Cleanup tool. Click here to download the cleaning tool. You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer CleanUp Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.

  Once you have installed the tool, right-click on the installation executable and select "Run as Administrator". Then a list of programs is listed. Select the Lifecam software you want to uninstall. This will remove all corrupted files installation. Then restart the software installation.

  Hope this will help get your software installed and working tools.

  Thank you, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Copy to the Clipboard, method (Table) copy an extra empty column more than expected

  Hello

  I use the copy to the Clipboard method for a Table, for example copy 4 rows with 3 columns. When I paste in Excel I get 4 rows with 3 columns and an additional column, which is empty, then the actual size is 4 x 4.

  Is it a mistake to Labview or can someone there explain to me why this is happening? Or better yet, how can I fix it?

  I've isolated the problem to an additional vi so that you can reproduce the error. Just let the vi run once and then paste the Clipboard to Microsoft Excel.

  My Labview Version is 11.0 32-bit, Microsoft Office 2010, WinXP SP3

  Concerning

  Marcel

  Extracted apparently hate property and invoke nodes.

  See attached vi for the workaround proposed by using the Clipboard.Write method.

• My Microsoft LifeCam program gives me a message that: "there are no cammera connected to this computer.

  A few months ago, I unplugged my computer to go to my friends for a LAN party House, when I am back and plugged my LifeCame VX 2000, and started the software called Microsoft LifeCam, it gave me a message telling me that there is no cammera connected to the computer.

  I then went to the Device Manager and it says I have a vega USB 2.0 connected and nothing on a Microsoft LifeCam.

  I also went to check on Skype and he also said I have a vega 2.0 USB connected.

  Another strange thing is that only the microphone of this "vega USB 2.0' works on Skype and not video.

  I have windows 7 ultimate 64-bit, I defenitely have the system requirements, because after all, it's a gaming PC.

  I have the latest drivers for and software as far as I'm concerned, because I checked in the device for Update Manager and he told me that all my drivers are up to date.

  Hello
   
   
   
  Method 1.
  With LifeCam VX 2000 connected in the not working USB Port...

  (a) open the Device Manager and search for imaging devices -> Microsoft LifeCam VX 2000 and Uninstall. (no need to remove the system drivers, can leave installed)

  (b) now search sound, video and game controllers -> Microsoft LifeCam VX 2000 and Uninstall. (also good can leave the drivers in the system, no need to delete)

  (c) now unplug the webcam not workingUSB port, wait a few secconds andplug a job.

  succesfully d) wait a while until it initialized in the system.

  ((e) now doing exactly the same things, as described in stage a) and b).

  (f) now change ports USB again, wait that it is properly installed in the system sayingready to use.

  After this webcam should work and Microsoft LifeCam application should detect it in the first USB port which did not work before, saying"There is no camera connected to this computer".

   
  Now check if the camera initializes and also if she also works in Skype.
   
  Method 2.
  If the problem persists, you can see the methods listed in the section below.
  Set the empty preview, "initialization error" or 'no camera not connected' error in the LifeCam software
  http://support.Microsoft.com/kb/933311
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Save the table/chart as an image file

  Hi all

  I wonder if there is any way I can save the graph Microsoft graph/with the data as an image file (jpg, etc.)? I need the image on the same file saved under the Microsoft Graph graph/so that the program is running. She should have black and non-white colors.

  I knew how to do it in matlab but don't know how to do it in labview. Can someone help me with an example Vi that can do it in labview 2009?

  Thank you!

  It's pretty easy. Just create the image for the chart and use one of the screws the graphic format:

  Note: This is also explained in the Help of LabVIEW.

• take screenshot and saves the image to a PNG file

  Hello

  How do I take screenshot and save the image as a PNG file?

  Thank you

  Avivit.

  If you want a picture of façade one VI, you can use the method to obtain images of Panel (or the Tool of Capture of Code, which offers a range of screws for this).

  If you want a picture of the entire screen, you can simulate a button on the print screen, using the method of Clipboard.Get Image Application class to get a picture of the contents of the Clipboard. If you are looking for "screenshot" you should probably find a few examples already.

• Windows Photo Gallery does not save the edited images.

  I have problems editing contrast and red-eye with Windows Photo Gallery.  I get rid of the red eye and change the brightness, close gallery and get an error message "an error prevents photo library to save this image."  The image isn't 'read only', it is a jpeg file, and I am the owner/user.  I edited many other images, but now it restricts me to do these as well as a few others that I've ever edit.  Any ideas on what's going on?

  Hello sjleite,

  Thanks for posting on the Microsoft answers Community Forum.

  If you encounter problems, saving images edited when you could before, I would ask

  If you have installed the 3rd party software that may interfere with the Windows Photo Gallery.

  (1) If you have a third Party photo editing software, try removing it and see if that doesn't

  correct your problem.

  (2) other forums, I found several mentions to be a problem with a corrupted author field. Look in the file properties Details page. You can get the properties on the photo in question, scroll to the right section of author and origin and remove characters. Select apply and close the file. If the field of copyright has no characters to remove, try adding a few characters and then delete them.

  (3) the last thing to try is to check the permission on the Windows Photo Gallery.

  Go at the beginning and list programs. Right-click on the icon of photo gallery windows live and go to properties. Select tab security put highlight the Everyone group, click the button change. Put a control under all permissions allow. Then do the same for the users group. Click on apply or OK.

  If please post again and let us know if these suggestions helped solve your problem or if you need further assistance.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Photo Gallery can't save the edited images

  My Gallery of photos will not save modified pictures.  He did it when I got the computer back in the spring.  I installed Kodak EasyShare software after that and it seems that is about the time when the problem started in the photo gallery.  What options will I get solve this without doing a system restore?  What are the negative aspects of restoring my computer?  Thank you very much!  I don't really know anything about computers.

  Hi computer_illiterate,

  If you are experiencing problems saving images edited when you could before, I recommend you to uninstall the Kodak software and check if you are able to save the images.
   
  (1) If you have a third Party photo editing software, try removing it and see if that doesn't
  correct your problem.
   
  (2) other forums, I found several mentions to be a problem with a corrupted author field. Look in the file properties Details page. You can get the properties on the photo in question, scroll to the right section of author and origin and remove characters. Select apply and close the file. If the field of copyright has no characters to remove, try adding a few characters and then delete them.
   
  (3) the last thing to try is to check the permission on the Windows Photo Gallery.
  Go at the beginning and list programs. Right-click on the icon of photo gallery windows live and go to properties. Select tab security put highlight the Everyone group, click the button change. Put a control under all permissions allow. Then do the same for the users group. Click on apply or OK.

  You can also check out the link below:

  Windows Photo Gallery: frequently asked questions:

  http://windowshelp.Microsoft.com/Windows/en-us/help/d29d1fe4-EECD-4ae0-9efa-423098e5406b1033.mspx#ELFAC

  I hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• MS paint does not correctly save the images

  Hey guys.  I have a slight problem.  Whenever I close a Microsoft Paint Document that is saved, the next time I open it there are small dots of random colors that "mix" with the image.  However, this is problematic because then the paint bucket will fill only the portion that is not discarded.  After several times to open and close the document, the pictures are also very badly tainted.  I have a Windows Vista, who has not yet upgraded to Windows Seven.  This is my first post here, so I don't really know what (if any) additional information is required.

  Thank you! :)

  Hi-

  I don't know if the problem has been corrected, but if not, I found a possible solution.

  I lived the same problem for a while, and I recently thought about it. If you save in JPG format, the tasks of random colors seems to occur. I tried to save the 24 - bit card ' shape and it seems to eliminate the problem. I hope this works for you also.

• Get the comment, "an error prevents photo library to save this image.

  I tried to edit my photos in Windows Photo Gallery and it used to work until about a month.  I always and only used the Photo Gallery program, but now it won't let me to save my changes that I make to photos.  I get the comment, "an error prevents photo library to save this image.  I have read many of the questions that are similar and have done the following...

  1. click on the round of departure
     
  2 type folder options in the search box, and then click the program folder Options
     
  3. Select the view tab
     
  4. in the window of advanced settings, under hidden files and folders, select Show files and folders
     
  5. click on OK
    
  6. go to the following folder (% of user is the name of the account that has the problem):

  C:\Users\%User%\AppData\Local\Microsoft\Windows Photo Gallery

  7. copy all the files here to another location, as a back up and then delete them from the directory of the Windows Photo Gallery

  Once the files are deleted, try to start Windows Photo Gallery.

  After that, go back to folder options and select do not show the hidden files and folders

  This does not work and I don't know what else to do.  Could someone help me please!

  Thank you
  Scarlet

  I tried to edit my photos in Windows Photo Gallery and it used to work until about a month.  I always and only used the Photo Gallery program, but now it won't let me to save my changes that I make to photos.  I get the comment, "an error prevents photo library to save this image.  I have read many of the questions that are similar and have done the following...

  1. click on the round of departure
     
  2 type folder options in the search box, and then click the program folder Options
     
  3. Select the view tab
     
  4. in the window of advanced settings, under hidden files and folders, select Show files and folders
     
  5. click on OK
    
  6. go to the following folder (% of user is the name of the account that has the problem):

  C:\Users\%User%\AppData\Local\Microsoft\Windows Photo Gallery

  7. copy all the files here to another location, as a back up and then delete them from the directory of the Windows Photo Gallery

  Once the files are deleted, try to start Windows Photo Gallery.

  After that, go back to folder options and select do not show the hidden files and folders

  This does not work and I don't know what else to do.  Could someone help me please!

  Thank you
  Scarlet

  ==============================
  Here's what I have on the subject... maybe a
  suggestions will work for you...

  Good luck...

  Windows Photo Gallery...
  Cannot save modified photos...
  possible solutions...

  --

  (1) I saw reports that this problem may be related
  Kodak Easy Share software. Installation "Kodak
  Single-action Version 8 for Windows from the
  the following link may be the solution.

  Kodak Easy Share 8 software version
  http://www.kodak.com/eknec/PageQuerier.jhtml?PQ-path=130&PQ-locale=en_US&_requestid=5320
  (FWIW, it's a good idea to create a system)
  restore point before installing software or updates)

  --

  (2) I've seen reports that could clarify the next steps
  until the question... Right click the library icon and
  Choose "Run as Administrator".

  --

  (3) I copied the info from a tech forum on
  the net... I don't know if it works, but maybe it's
  worth a try:

  A. right click on Task Manager open the
  taskbar on the bottom of your screen and choosing
  The task in the menu Manager.

  B. click the tab process, along the upper part of the
  The Task Manager screen.

  C. in the process tab, select the corresponding button at the bottom
  left of the screen that says "show processes of.
  all users"and click on it. Click 'Continue' to the UAC
  the prompt that appears.

  D. the screen should turns off a moment, then
  back with much more than process listed. Click
  the "Command line" column to sort the list and
  Search:

  "C:\Program Files\Windows Media Player\wmpnetwk.exe"

  Read the description in the next section on:

  Windows Media Sharing Service reader network

  F. click on this process. Click the end «»
  Treat button"at the bottom right of the screen.
  Confirm 'End process' if necessary.

  You should now be able to save your changes to
  your photos normally. The bad news is that this
  should be performed whenever you start or restart Vista.
  And I don't know how to prevent the situation from
  in the first place of loading.

  --

  4) published by: artologik
  The solution came to me when I could not recreate
  the problem on a laptop with Vista Home.
  Everything I could compare, I noticed that the
  %Path% environment variable was not between different
  the 2 machines.

  I guess that WLPG relies on the dll must be found
  on the way to the system; When not found, it must return
  Back to ' base or incomplete "library finds it
  the default specific paths or the user. The solution for
  me has been to ensure the entire path system
  to the folders in the order appropriate.

  To fix, follow these steps:

  A. right click on the COMPUTER icon on the
  desktop and choose PROPERTIES

  B. choose ADVANCED SYSTEM SETTINGS

  C. Si you are prompted by UAC to allow, go ahead.
  and ALLOW

  D. click on ENVIRONMENT VARIABLES...

  E. in the bottom half, under SYSTEM VARIABLES,.
  Find the PATH variable and highlight the

  F. click the button CHANGE

  G. ensure that what starts with
  % SystemRoot%\system32;%SystemRoot%;

  H. ensure you that a semicolon separates each entry.

  I. click OK three times

  J. restart the computer

  K. and here.
  John Inzer - MS - MVP - digital media experience

• After editing an image in windows Photo Gallery can't save the picture. I get a message that tells me that something is wrong with the application. How to fix this problem?

  After editing an image in windows Photo Gallery can't save the picture. I get a message that tells me that something is wrong with the application. How to fix this problem?

  Hello

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Photo-Gallery-frequently-asked-questions

  It will be useful.

• How to save an image in the body of an email?

  How to save an image in the body of an email? All I get is exemplary, not save as.

  How to save an image in the body of an email? All I get is exemplary, not save as.

  ===========================================
  Take a look at the following articles:

  Open or save an attachment in Windows Mail
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-or-save-an-attachment-in-Windows-Mail

  Parts attached email Windows Live Mail - open and save
  http://www.webdevelopersnotes.com/tips/windows_live_mail/windows_live_mail_attachments_open_save.php

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.