Save the input of the meter against the clock data

Similar Questions

• Unable to save the 'Release Date' field in iTunes/Windows 12.4.0.119

  Unable to save the 'Release Date' field in iTunes/Windows 12.4.0.119

  I've just updated to 12.4.0.119 and can no longer add Release Date for a TV show.  When I go to "Get Info" and type the release Date, it allows me to enter a valid date, but as soon as I have the label off the field it emerges by itself.  If I enter the date and click on 'Ok', the date is not recorded.

  I had this same problem Windows 10. Just tested it on iTunes/Mac 12.4.0.119 - this platform will not yet you allow to select the release Date field to make an entry.

  It is a major issue, as AppleTV allow no sorting replacing television programs other than by Release Date.

• Users of readers to save the xml data file

  Hello
  We can e-mail through the form xml data file without its extension drive. It is very good. Instead of emailing, I want just to save the xml data file in my local system.
  What is the syntax to get it? To send email, I usually create a "submit" button and the area of the submittoURL write us mailto:[email protected].
  What to write to save it on the local computer instead of emailing? I tried saveto: C:\NewFolder or fileto:C:\NewFolder. Nothing works. I think I'm missing the good syntax here.
  I know its possible by RE the pdf, you can get using savedataXML(). I want to achieve this goal without the form.
  Thanks in advance,

  Chaitanya

  The best you can do is set up a submitForm action and uses a type mailto URL. This will prompt the user to attach to an e-mail message using their email client or save it to a file.

• Save the text data and digital

  Hello

  It is two part question/need help: -.

  1. I want to display the same number of decimal places on the table as in the attached picture.  In addition, include text on the last column of entry (as shown in the picture).

  2. I also want to save the data in a file where there are also many digital data and textual data as shown in the picture as an attachment.

  Any help will be greatly appreciated.

  Thank you

  hiNi.

  You must format the values separately and mount it as an array of strings. I don't understand the purpose of the shift register. Why are there controls and a case user operated inside the loop structure, because the loop will run so fast that any user control would be unpredictable.

  Here's a simple code (LabVIEW 8.5) that you could use. Modify if needed.

  

• View and save the raw data DAQ simultaneously

  Hello

  I'm new to LabView. I'm doing a VI that continuously displays in an indicator or a gauge the value of an analog channel to a data acquisition, while at the request of the user, saving some values of this signal on a table.
  I can do each of the things separately:
  -display of real-time in an indicator or a gross DAQ analog gauge
  -save some points of the raw analog signal DAQ
  but when I try to do the two I'm not sure of the place where put assistant DAQ so it samples when it should.
  The attached VI does not work properly, but you can see the 2 things I'd like to have working in parallel.

  Any help is greatly appreciated.

  Thank you much in advance.

  Hello Gabriel_Torre

  You can use queues is a simple way to divide the part of acquisition from the analysis or display the part. It's the same as in the examples of producer consumer of LabVIEW.

  I also recommend setting the samples/rate of factor 1/10 if the loop runs with 100ms not only every second. Now all work with time of 100ms iteration loops with this architecture.

  

  It will be useful.

• Cannot save the incorrect date format

  I keep trying to save my computer... tells me incorrect date format?

  I had the same problem and ended up going through the online chat.  I guess there is a problem with the site, but they managed to sign up to my computer via chat.  Hope that helps

• Toshiba Windows Vista operating system to start, Safe Mode doesn't work anymore. How to save the personal data of the computer that won't start.

  I have a Toshiba laptop with windows vista: the OS home.

  Recently, the operating system wouldn't start up, there will always be on the page of the logo 'miscrososft society '.

  I tried F8 to start safe mode, safe mode started but will load some files and stay on this page forever.

  I tried to run the system repair, the report is as follows:

  Signature of the problem:

  Event name: Startup Repair V2

  Signature of the problem 01: breakdown car

  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000

  03:6 problem signature

  Signature of the 04:851981 problem

  Signature of the problem 05: corrupt and registry

  Signature of the problem 06: corrupt and registry

  Signature of the 07:1016 problem

  Signature problem 08:3

  Signature of the problem 09: Rollback register

  Signature of the problem 10:0

  Signature of the 11 problem: 6.0.6001.2.1.0.256.1

  Signature of the 12:1033 problem

  I tried to use system restore, but he says he has not found a moment of restoration which is good.

  The main concern right now for me is to get my personal data and files on the computer.  I still have another computer to use, so I'm not so worried about starting the computer.  I want to find a way to the first backup of my personal data and files from the computer to external devices, then try to repair the computer.

  Thank you.

  Hi DreamMeng,

  You can try to use third party software to back up data and check.

  You can use your favorite search engine to navigate on the third-party data backup software and that the software allows to save data.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also make contact with the Local Techshop for assistance to the protection of the data.

• Save the error data

  Hi all

  I have main_tbl of the table. I want to extract all lines of this line to temp_tbl... If all rows have error I insert these lines in error_log table.

  What is the best way to implement the feature above?

  Use DML Error logging for example

  (1) create the error log table

  BEGIN

  DBMS_ERRLOG.create_error_log (dml_table_name-online 'dest');

  END;

  /

  (2) runt the Insert containing the LOG clause example

  INSERT INTO dest

  SELECT *.

  SOURCE

  LOG ERRORS in err$ ('INSERT') dest DISMISS LIMIT UNLIMITED;

  (3) the rows that failed during the insertion are stored in the ERR$_DEST table, and the reason for the failure.

  COLUMN ora_err_mesg$ FORMAT A70

  SELECT ora_err_number$, ora_err_mesg$

  MRO$ dest

  WHERE the ora_err_tag$ = "INSERT."

  ORA_ERR_NUMBER$ ORA_ERR_MESG$

  --------------- ---------------------------------------------------------

  1400 ORA-01400: cannot insert NULL into ('TEST'. "" DEST ". (' ' CODE ')

  1400 ORA-01400: cannot insert NULL into ('TEST'. "" DEST ". (' ' CODE ')

  ORACLE-BASE - DML Oracle 10 g Release 2 of the database connection error

• Save the page to enter a file

  Hello
  
  
  I have a task where a user should be able to save the nput on a page in a file.
  The page contains a form and a tabular presentation.
  The user must also have the ability to download the recorded files and save the corresponding data in the database.
  This is necessary for the possible inadequacies in internet connection and it is used in laptops.
  I wonder what would be the easiest way to do it.
  I thought that maybe it could be done so that the entire page is copied into the HTML and stored in a file. Then on download the corresponding input values of the objects are copied to the page and the page is then submitted. But how to copy the values of a BLOB?
  And I guess that there is a better way to do it?
  
  Any advice or comments would be really useful, because I have to get this loan soon.
  
  
  Tiina

  Hmmm... If your users want to start to edit the report in the apex itself, but to continue the same change even after the network connection is lost?
  I thought asking them to download excel first, edit (excel), and then upload it later.
  If this is the case, regardless of what you do at the top entered values will remain in the user's browser. Of course, you can use a tabular form based on a collection and use ajax automatic backup of data from time to time, but even that won't be very effective.

  Save the HTML code would probably be the only way (if they do not want to download excel). As I mentioned earlier, download this HTML file on an XML column and extract values from there. You can also combine approaches, by having a Javascript on the page dumps all the data in a text box in a separate comma structure which users can save a csv file, open in excel change I have and then transfer it too.

  Whatever the method used, you have a slight problem (that you've neglected). Once the connection is lost, request of the form in a table Pagination no longer work, users can run only on a single page (the one that is responsible), is the same with downloading the report to Excel again who needs a request to the server (so the javascript method that I mentioned would have this problem again). Save the report together in an HTML page (by using a value large paging) or modifying an excel would probably be the only way then.

• Where labview does not save the data file

  Hello

  I wonder when I choose the path PDF running vi and save a file of measures in a vi. Later when I do a .app or .exe file, where he saves the file data or results. I looked at the folder of the application where I have the .app or .exe file and it does not record there.

  Thank you

  Yogesh

  Never mind. It save .app package file. I can see and read by opening the .app package content.

  Thanks for your help

  Yogesh

• Save the changes to the input parameters of circle finder

  In the finder, circle and Pattern matching

  We use some KING and setings of entry...

  I need to record this change while the application is running.

  Which method I should use...

  to save the changes

  

  Hello

  using xml with the structure of the event function to read and write the values selected.

  Example of XML (you can write the the datastructure options circular detection directly):

  

  Best regards

  K

• How to save the text file input array

  Hello, I am very new to LabVIEW, so apologies if I use the wrong terminology.

  I did a VI which reads 25 text files from a 3D array.  When I click on run I need to select the files 25 text.  Is there a way I can save the data imported for later calculations without having to select the files each time?

  Here's what I have:

  

  Dan_Owen101 wrote:

  Thanks for that.  But the user will not have access to these files during execution of the VI.  There are many other paintings that I'll need to save and index for other variables as well, so just for that would use the method of you would be useful to know.  All I really need is a way to save these relatively few values in a table.

  So do you intend to have these values hard-coded into your executable?  This seems dangerous and likely to have you to make updates much.  Believe me when I say you want to have the sitting files with the executable.

  But if you're insistent on this, I would use a global variable.  Have a VI just read all files and build the table for you and write in the global variable.  Then you can right-click on the control on the Panel before global variable 'Create default value'.  Save the variable and build your executable file.

• I can not save the background sound on R500 27175GU

  Hi all

  I've been looking for a solution for a long time but no answer. My laptop Lenovo R500 27175GU, OS is XP pack 3. Audio device is Conexant 20561 Smart Audio HD. The problem is I can not save the background music but can record microphone (IE I can not record sound from the speaker). When I explore the Volume control, I see that I have just two mixer device: Conexant HD Audio Output, Conexant HD Audio Input. When go to Conexant HD Audio Input, I have only microphone for recording. Can anyone help me solve this problem so that I can record the speaker, please let me know.

  Thanks in advance.

  Because your laptop is not the software that does what you want.

• VBAI 2012 "save the image calibrated to the file" issue

  Hello

  Under the State of 'Calibrate Image', 'Save the image calibrated to the file' option does not work correctly.

  With the exception of the type 'Point of Distance' of the calibration, the new image is ever recorded. I checked the calibration image .cal2 in the folder \ProgramData\National Instruments\Vision AI\Calibration Builder, each iteration the meta-data are updated but not the image.

  I have a camera calibrated with a grid (see picture) and using the model of the distortion. Working remotely can sometimes change and I need to take a recalibration. This step should be as simple as possible. Example: put a model calibration in the field of view, then press a button recalibrate.

  The problem mentioned above, it is impossible. Whenever I have to manually go into the choice of the State of the Image calibrate and update the calibration image myself. Otherwise, calibration is recalculated from the original image which is not best suited for the new working distance.

  Is there an easy way to make VBAI save a new image of calibration with each iteration?

  Or is it something that I did not understand this option 'save image calibrated to the file?

  Vision Builder for Automated Inspection VBAI 2012

  Windows 7 64 bit

  Best,

  Ken

  Hi Larpin,

  Unfortunately VBAI does not support the suggested behavior. The best solution in my opinion would be to implement your application completely in LabVIEW!

  To Eval download link. Version:

  https://lumen.NI.com/nicif/en/evallv/content.XHTML

  Kind regards

  MISIC

• HPDM 4.6 SP4 cannot save the files deploy subtask

  Recently, when you create a new task to deploy a file and try saving it I get:

  "Cannot save the subtask to deploy files.

  If I create another type of task it saves without problem. The only time where there is a problem, is if I am trying to add files to my task. If I try to add a file to an existing template, I get the unable to merge the error of the model.

  I have checked the permissions in the main repository, run the test, all come back fine. I even tried manually adding files to the repository and that's ok too. I can't find something as interesting in the newspaper. I should mention that we did a database migration recently, but I test all features and managed to save a task of deployment without problem.

  Try to get out of the individual tasks that contains files (in this case the msi Hotkey filter) I get the following:

  2015-07-03 14:08:21 [error code: 5260288] [Module: MasterController] [category: input/output disc] 2015-07-03 14:08:21 [error details]:.\SyncTask.cpp@91: failed to sync files. .\port_layer\ftpclient\fileclient.cpp@816: failed to get the data from the file. .\port_layer\file_io\filefuncs.cpp@86: failed to get the data from the file : D:\HPDM/Repository/Files/ToDeploy\Hotkey filtre.\port_layer\file_io\filefuncs.cpp@84: the system cannot find the specified file.

  In the masterrepository log:

  2015-07-03 15:14:28 ERROR could not remove the package: Test. \port_layer\ftpclient\fileclient.cpp@235: has no file stat, RemoteDir: / files/repository/ToDeploy, name: Test.
  .\port_layer\ftpclient\fileclient.cpp@390: could not get the file stat, RemoteFile:\\10.7.1.29\HPDM$/Repository/Files/ToDeploy.
  .\port_layer\ftpclient\ShareFolderClient.cpp@424: has no file stat data.
  .\port_layer\file_io\filefuncs.cpp@86: failed to get the data from the file : \\10.7.1.29\HPDM$/Repository/Files/ToDeploy\Test
  .\port_layer\file_io\filefuncs.cpp@84: the system cannot find the specified file.

  2015-07-06 09:11:44 CTaskReceiverThread::recvTask() of ERROR: unable to receive data from ssl server.
  2015-07-06 09:11:44 CTaskReceiverThread::recvTask ERROR failed. Returns the value-1.
  2015-07-06 09:12:10 sendReoprt() of ERROR: unable to send data to the server.
  2015-07-06 09:12:10 CReportSenderThread ERROR::recvTask(): could not receive data from ssl server.
  2015-07-06 09:12:10 ERROR CReportSenderThread::recvTask failed. return value = - 1

  10.7.1.29 refers to a repository of the child, I have about 30 repositories of the child.

  I have not changed any configuration, I don't really understand how this happened, I can't even create my first Contact rules, scheduled tasks or create new tasks/templates. We are in the midst of a large-scale deployment so that any help ASAP that would be most appreciated!

  Thank you

  Luke

  This has been resolved with the help of Chen_HPDM by e-mail.

  We changed the console.conf to:

  HPDM. NEWSPAPER. LEVEL = DEBUG

  (console.conf can be found in C:\ProgramData\Hewlett-Packard\HP device Manager\Console\conf)

  I ran the task to deploy the files again and had the following in the log:

  2015 07-09 09:43:41 [WT-EventQueue-0] DEBUG Console - Request (20201): add templates

  2015-07-09 09:43:42 [WT-EventQueue-0] DEBUG Console - [TimeSpan] (20201): Add models [true]: 86

  2015-07-09 09:43:42 [WT-EventQueue-0] TemplateManager DEBUG - processAddTemplate: OS = HPWE8_64, name = New Test, category = files and the registry, status = transfer and tip =

  2015 07-09 09:43:42 [WT-EventQueue-0] DEBUG Console - Request (20202): update of model

  2015-07-09 09:43:42 [WT-EventQueue-0] DEBUG Console - [TimeSpan] (20202): update model [true]: 142

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files\ToDeploy\_Temp

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files\ToDeploy

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files\ToDeploy\_Temp

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files\ToDeploy

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp

  2015-07-09 09:43:45 [Thread-43] DEBUG MPFactory - Call TemplateMP.

  2015-07-09 09:43:45 [Thread-49] DEBUG TemplateManager - processAddTemplate: OS = HPWE8_64, name = New Test, category = files and the registry, status = transfer and tip =

  2015-07-09 09:43:45 [Thread-49] TemplateManager DEBUG - processUpdateTemplate OS = HPWE8_64, name = New Test, category = files and the registry, status = failure, tip =

  The Console could not delete a temporary file created previously called HPDM_Temp. I renamed the file and was able to create the task.

  I can't wait to find my question on the forums, and someone didn't post the solution so I hope this helps and thanks again Chen!

  Luke