Save the txt spreadsheet column

Similar Questions

• I have a pdf file that contains the text if I copy all the text and paste it into Notepad and save the .txt file is it changes the ascii value of the text?

  I have a pdf file that contains the text if I copy all the text and paste it into Notepad and save the .txt file is it changes the ascii value of the text?

  If the encoding is ASCII? Laughing out loud

  Be well...

• How to save the .txt file without opening a dialog box.

  Hello..

  How to save the .txt file without opening a dialog box.

  It is impossible to Flash running in the browser.

• Save the table on column

  Hello

  I have attached a simplified VI which records data after taking measurements of my measuring instrument.  Each iteration in the while loop is a measure.  Currently the data in two columns.  Can you help me save the data after each while the iteration of loop in different columns.

  For the attached VI, I want to get the data spread across 8 columns:

  x0data y0data x1data y1data x2data y2data x3data y3data

  Thank you

  hiNi

  Just put a 2D array of converts between the while loop and array to a worksheet string

• How do I sort the rows of the table that belongs to the same name and save the .txt file?

  Hello

  I am facing a problem, I read the .txt file that has several lines and columns.

  Third column represents the name of the group, as Group 1, group 2 and group 3. attached .txt file in the annex.

  I wanted to generate the wise group .txt file, as all the raws that 3rd element name group 1 must be in a .txt file and all lines that has 3 name group 2 element must be a .txt file.

  I hope that I explained my problem.

  pelase guide me how can I have the solution for this problem.

  Thank you much in advance.

  Kind regards

  Ankit.

  I have provided a simple example that works.  Feel free to use any method best suited to your needs as there are already several good ideas on this thread

• Save the .txt file - works in a desktop not on device application

  Hello everyone. Im trying to save the text in a TextArea in a .txt file and have been able to do in a desktop Air application but cannot make it work for the BP. I made sure to make access_shared, the problem is in my code.

  private function saveFile():void
              {
                  if (currentFile) {
                      if (stream != null)
                      {
                          stream.close();
                      }
                      stream = new FileStream();
                      stream.openAsync(currentFile, FileMode.WRITE);
                      stream.addEventListener(IOErrorEvent.IO_ERROR, writeIOErrorHandler);
                      var str:String = mainTextField.text;
                      str = str.replace(/\r/g, "\n");
                      str = str.replace(/\n/g, File.lineEnding);
                      stream.writeUTFBytes(str);
  
                      stream.close();
                      dataChanged = false;
                  }
                  else
                  {
                      saveAs();
                  }
              }
  

  private function saveAs():void
              {
                  var fileChooser:File;
                  if (currentFile)
                  {
                      fileChooser = currentFile;
                  }
                  else
                  {
                      fileChooser = defaultDirectory;
                  }
                  fileChooser.browseForSave("Save As");
                  fileChooser.addEventListener(Event.SELECT, saveAsFileSelected);
              }
  
              private function saveAsFileSelected(event:Event):void
              {
                  currentFile = event.target as File;
                  saveFile();
                  dataChanged = false;
                  currentFile.removeEventListener(Event.SELECT, saveAsFileSelected);
              }
  

  I got the Save pop-up dialog box but nothing happens.

  Oops. turns out it was as simple as

  private function saveFile():void
              {
                  var fileRef:FileReference = new FileReference();
                  fileRef.save(mainTextField.text, "myfile.txt");
              }
  

• How can I control the writing-data-to - spreadsheet.vi to save the data?

  Hi all

  I tried to draw a wave and save the data to excel. Now, I want to control the writing-data-to - spreadsheet.vi to save data when I want which means that the vi records nothing until I have send a command to it. How can I make this happen or do I need any other screws?

  Nicky

  Hello

  Maybe this wat you are trying to do... Let me know if it helps...

  Kind regards

  amine31

  (Kudos are always welcome)

• How to read the xml and save the contents of the ITA in .txt format

  Hello

  Is it possible to read an xml file and save it in the .txt format. Please let me know if there is a way to do it.

  Thank you

  Ankit G

  That read the function is only for xml files written using the LabVIEW diagram, so if you have something else, you need the functions in the range of xml parser.

• Save the data on the button and then save the data on a spreadsheet on another key.

  Hello

  I am a new user of Labview. I'm developing a Labview 7.1 program that will record data on the keys. Another button, he must stop recording, and then open a file dialog box to save the data stored on a worksheet. I read in this forum that I have run several loops in parallel but unfortunately I can't see the examples because I use an older version of Labview. I tried to do to pass the data in a table, once recording is started, and then I carry the data to write a function that spreadsheet inside an another case statement. However, once I put the writing on the spreadsheet for the case statement he cannot write. I tried to put out the statement box but it save only a single set of data. Sorry if I am not clear with my explanation. It will be greatly appreciated if someone can give me some advice on this.

  Thanks in advance for your information.

  See you soon,.

  Anson

  You want to build a table of data.
  If the Boolean value is true, you will add a data point in the table.

  If it's wrong, you do not add anything, and the loop will be re-iterate.

  In the example below, the same code appears twice.

  Half top shows the case of 'Real' and the bottom half shows the case of 'false '.

  

• reading the timestamp column in the txt file

  Hi pros labview

  I work with labview 8.6 for about 1 week and I need help in reading txt files.

  the textfiles that I read have 2-11 columns.

  the first column shows the time and others show different channels where I measured the voltages.

  It is therefore no problem with reading of the voltage-columns and put it on the y - axis to a chart of the vi but I can't the time on the x-axis column.

  I took the basic "read file.vi" and it has changed a little according to my needs.

  hope you can help me, getting time on the x-axis column. (perhaps with a xy chart?)

  the vi and I have to read txt file are attached...

  Here is an example. The formatting of the x axis relative time will now do something.

• How to save the table column and row headings

  I have a table where I activated the column and row headings.  Once the table is loaded with data, I would like to save the contents of the table, including the column and row headings in a text file.  The crux of "value" property returns only the content of the table, not the row and column headers.  I could use "header line chains []" and '[] column header chains' property nodes as well, but I'm in the island there is an easier way.  Looks like adding the headers of lines would be difficult.  Any ideas?

  Thanks in advance.

  Here is a way. The construction with the empty constant is to provide to the left corner of the table where there is no data.

  

• "Error message: out of memory". Save or close any files or applications"when you try to print the Works spreadsheet

  Original title: receive in Microsoft Works Spreadsheet click on print, I receive this message. "Out of memory. Save or close any files or applications "Whats wrong?"

  Same as above

  Hi dennyfer21,

  1. This only occur when you print the Works spreadsheet?

  You can read the following article and try the steps and check if it helps to solve the problem.

  "Not enough memory" error message when you print to the works

  http://support.Microsoft.com/kb/841220#appliesTo

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot save the hosts.txt but I am the administrator

  Trying to save the changes to hosts.txt I get the message ' c:\windows\system32\drivers\etc\hosts.txt

  You don't have permissions to save in this location. Contact the administrator for permission"

  I am the administrator and file permissions look OK. Any ideas how can I save this file?

  I use Windows 7 with Service Pack 1

  Hello

  As I understand it, you can't save hosts.txt on the computer. I suggest you follow the troubleshooting steps to check if this may help.

  1. don't you make changes on the computer before the show?
  2. you receive an error message on the computer?
  3 is the issue limited to host.txt?

  Folder and file permissions

  Here are the steps to change the ownership and permissions of files and folders:

  a. right click on the file or folder, click Propertiesand then click the Security tab.

  b. click Advancedand then click the owner tab.

  c. click change, and then do one of the following:

  · To change the owner to a user or group that is not listed, click other users and groups , in area enter the object name to select (examples), type the name of the user or group, and then click OK.

  · To change the owner to a user or group that appears in the area of change of ownership to , click the new owner.

  d. If you want to take ownership of the contents of the folder, select the checkbox replace the owner of sub containers and objects .

  e. click OKand then click Yes when you receive the following message is displayed:

  You are not allowed to read the contents of directory folder name. Do you want to replace the the directory permissions with permissions granting you full control?

  All permissions will be replaced if you click Yes.
  
  Note folder_name is the name of the folder you want to take charge.

  f. click OKand then reapply the permissions and security settings that you want for the folder and its contents.

  Additional considerations

  · An administrator can take ownership of any file on the computer.

  · Affecting the ownership of a file or a folder might require that raise you your permissions using user access control.

  Just reply with the results. I'd be happy to help you further.

• Save the contents of the form elements in a txt file

  
  Hello

  I am trying to save the contents of the form to a text file by clicking on a button. For example, in my form, I have 4 text boxes

  1. client code

  2 Subscriber

  3. customer name

  4. customer name

  There is a backup button in the page. Once I click on save button, I get a download prompt to save the file (txt file). The txt file must contain the values of the fields in each line. Can we achieve using Apex?

  Thank you

  TJ

  Hi TJ.

  Yes, its possible. For this you must use a bit of PL/SQL Code.

  In the page, you create a branch;

  Branch point = to present: after the treatment (after calculation, Validation and treatment);

  Type branch = branch of PL/SQL procedure

  And the branch code, you have to have something like this:

  declare

  CLOB v_clob;

  v_blob blob.

  dest_offset NUMBER: = 1;

  offset NUMBER: = 1;

  amount INTEGER: = dbms_lob.lobmaxsize;

  blob_csid NUMBER: = dbms_lob.default_csid;

  lang_ctx INTEGER: = dbms_lob.default_lang_ctx;

  caveat INTEGER;

  V_LENGTH NUMBER;

  Start

  DBMS_LOB.CREATETEMPORARY (v_clob, true);

  DBMS_LOB.CREATETEMPORARY (v_blob, true);

  v_clob: = ' ID: ' | : PXX_ID | »

  Geographical area: ' | : PXX_LOCATION | »

  First name: ' | : PXX_LAST_NAME | »

  First name: ' | : PXX_FIRST_NAME;

  DBMS_LOB. () CONVERTTOBLOB

  v_blob,

  v_clob,

  amount,

  dest_offset,

  offset,

  blob_csid,

  lang_ctx,

  (caveat);

  V_LENGTH: = dbms_lob. GETLENGTH (v_blob);

  --

  -set up the HTTP header

  --

  owa_util.mime_header ("application/octet ', FALSE");

  -set the size so that the browser knows how to download

  HTP.p ("Content-length: ' |") v_length);

  -the name of the file will be used by the browser if users only one save as

  HTP.p ('Content-Disposition: attachment; filename = "download.txt" ');

  -close the headers

  owa_util.http_header_close;

  -Download the BLOB

  wpg_docload.download_file (v_blob);

  end;

  See you soon

  Carlos Pereira

• Code to save the PDF file as an excel spreadsheet?

  I have the following code - which allows me to save a file based on the value of a field:

  myTrustedSaveAs = app.trustedFunction (function (doc, path)
  {
  app.beginPriv ();
  doc.saveAs({)
  cPath: path,.
  bCopy: true,
  bPromptToOverwrite: true
  });
  app.endPriv ();
  });

  myTrustedOpenDoc = app.trustedFunction (function (path)
  {
  app.beginPriv ();
  app.openDoc({)
  cPath: path
  });
  app.endPriv ();
  });

  I would like to be able to record both a PDF and one a worksheet based on the same path.   What is the code to use to save the file as an excel spreadsheet?

  I use Adobe X pro.

  Reference on the Acrobat JS API for the saveAs method shows the various necessary parameters.

  myTrustedSaveAs = app.trustedFunction (function (doc, path)
  {
  app.beginPriv ();
  doc.saveAs({)
  cPath: path,.

  cConvID: "com.adobe.acrobat.xlsx."

  bCopy: true,
  bPromptToOverwrite: true
  });
  app.endPriv ();
  });

  myTrustedOpenDoc = app.trustedFunction (function (path)
  {
  app.beginPriv ();
  app.openDoc({)
  cPath: path
  });
  app.endPriv ();
  });

  You can also use the ID of the conversion of the 'com.adobe.spreadsheet '.