Saving energy re - install error of setting on Portege S100
I'm trying to re - install the utility Power Saver on my Portege S100 (after its removal via Control Panel |) Remove Programs).
I downloaded the version of WinXP S100 of Power Saver and unpacked. When I run the setup.exe, I get a stop error message "the parameter is incorrect." There is no apparent documentation with the download say what parameter is required etc.
Has anyone seen this before or you have a suggestion on how to re - install Power Saver successfully.
Thank you.
Hello
Please note that all of the Toshiba Utilities must be installed in the correct order!
Please see on the page of the driver installation instructions!
The common modules must be installed first before other tools and utilities will be installed
There is also the hardware configuration and Power Saver tool. This utility should be used for the BIOS ver1.30 or above.
Concerning
Tags: Toshiba
Similar Questions
-
Title says it all. If I try "to open" an attachment, the download dialog appears, and the progress bar begins to fill, then it should be full I get the message:
"The download cannot be saved because an unknown error occurred
Please Try Again. »
I can always save the files, but then I have to delete them (and it's just a hassle). Any help would be appreciated!
Do not have an anti-virus. However, I understood what the problem was!
It seems that he was not really affecting all attachments, simply *.pdf files (I did not know it since I usually get pdf attachments only).
The problem is that my default pdf reader has been set on a plug-in that was not working. I changed it and all is well.
-
I can't update I get is more rgisteed or installed error message. When I try to fixit I get error report faild to install components. I can't get scurity essentials to install. What should I do to fix this
Hello
I suggest try to reset the Windows Update components, follow these steps:
- Open a Windows command prompt window. To open a command prompt, click Start , and then click run. Copy and paste (or type) that follows the command in the Open box, and then press ENTER:
cmd
- Stop the BITS service and the Windows Update service. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
- net stop bits
- net stop wuauserv
- Delete the qmgr*.dat files. To do this, type the following command at a command prompt and press ENTER:Del "%ALLUSERSPROFILE%\Application Data\Microsoft\Network\Downloader\qmgr*.dat.
- If this is your first attempt to troubleshoot Windows Update by following the steps in this article, go to step 5 no proceed to step 4. Step 4 should be done only at the time the Troubleshooting If you cannot resolve your Windows Update problems after following all the steps but step 4. The steps in step 4 are also carried out by the "aggressive" mode of the fix it Solution above:
- Rename the following files to *. BAK:
- %SystemRoot%\SoftwareDistribution\DataStore
- %SystemRoot%\SoftwareDistribution\Download
- %Systemroot%\System32\Catroot2
To do this, type the following commands at a command prompt. Press ENTER after you type each command.
- Rename the following files to *. BAK:
- Ren %systemroot%\SoftwareDistribution\DataStore master
- Ren %systemroot%\SoftwareDistribution\Download master
- Ren %systemroot%\system32\catroot2 master
- Open a Windows command prompt window. To open a command prompt, click Start , and then click run. Copy and paste (or type) that follows the command in the Open box, and then press ENTER:
- Reset the BITS service and the Windows Update service for the default security descriptor. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
- SC.exe tisb strands D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
- SC.exe tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
- Type the following command at a command prompt and press ENTER:CD /d %windir%\system32
- Reregister the BITS files and Windows Update files. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
- Regsvr32.exe atl.dll
- Regsvr32.exe urlmon.dll
- Regsvr32.exe mshtml.dll
- Regsvr32.exe shdocvw.dll
- Regsvr32.exe browseui.dll
- Regsvr32.exe jscript.dll
- Regsvr32.exe vbscript.dll
- Regsvr32.exe scrrun.dll
- Regsvr32.exe msxml.dll
- Regsvr32.exe msxml3.dll
- Regsvr32.exe msxml6.dll
- Regsvr32.exe actxprxy.dll
- Regsvr32.exe softpub.dll
- Regsvr32.exe wintrust.dll
- Regsvr32.exe dssenh.dll
- Regsvr32.exe rsaenh.dll
- Regsvr32.exe gpkcsp.dll
- Regsvr32.exe sccbase.dll
- Regsvr32.exe slbcsp.dll
- Regsvr32.exe cryptdlg.dll
- Regsvr32.exe oleaut32.dll
- Regsvr32.exe ole32.dll
- Regsvr32.exe shell32.dll
- Regsvr32.exe initpki.dll
- Regsvr32.exe c:\windows\system32\wuapi.dll
- Regsvr32.exe c:\windows\system32\wuaueng.dll
- Regsvr32.exe wuaueng1.dll
- Regsvr32.exe c:\windows\system32\dllcache\wucltui.dll
- Regsvr32.exe c:\windows\system32\wups.dll
- Regsvr32.exe wups2.dll
- Regsvr32.exe wuweb.dll
- Regsvr32.exe qmgr.dll
- Regsvr32.exe qmgrprxy.dll
- Regsvr32.exe c:\windows\system32\wucltux.dll
- Regsvr32.exe c:\windows\system32\muweb.dll
- Regsvr32.exe c:\windows\system32\wuwebv.dll
- Reset Winsock . To do this, type the following command at a command prompt and press ENTER:
- If you are running Windows XP or Windows Server 2003, you must set the proxy settings. To do this, type the following command at a command prompt and press ENTER:Proxycfg.exe d
- Restart the BITS service and the Windows Update service. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
- net start bits
- net start wuauserv
- If you are running Windows Vista or Windows Server 2008, erase the BITS queue. To do this, type the following command at a command prompt and press ENTER:Bitsadmin.exe/Reset /allusers
- Install the latest Windows Update Agent. For more information, click on the number below to view the article in the Microsoft Knowledge Base:949104 (http://support.microsoft.com/kb/949104/) how to obtain the latest version of the Windows Update Agent to help manage updates on a computer
- Restart the computer.
-
"Protected HP cartridge installed" error
Dear community,
I have a printer HP Officejet pro 8600 and recedntly I bought a reremplie cartridge. When I installed the ink I constantly get a protected "HP cartridge installed" error message. I already turn off the setting "HP cartridge protection" from the beginning.
How can I remove this error and use my printer?
Best
KumsaHi Kumsa,
Protected HP black cartridge allows the cartidge owner to set protection of the cartridge, once such an is set (probably by its previous owner) cartridges will be accepted by the printer used to activate this function and which cannot be undone...
You can find more information in the following link:
http://www.cartridgesupport.com/HP950and951usage.PDF
I suggest you contact the vendor of cartridge or replace the ink cartridges
-
Original title: locking error screen
Hello. I use Win 8 Pro x 64 and I'm having a problem affecting the lock screen wallpaper. I am the admin of the machine and Windows is activated.
After a few days ago, Windows stopped to change my lock screen background. When I try to change it, the error is displayed on the screen:LOCK SCREEN ERROR
Setting the lock screen has failed. Please try again.However, I can still change my profile picture and the bottom of the start menu.Other users of the computer can change the lock screen normally. My user account is linked to my Outlook.com account as well as others.I already tried the other 'solutions' out there: in doing a selective startup with msconfig, disable services applications at startup and also manually delete the folder "C:\ProgramData\Microsoft\Windows\SystemData". Needless.I also have the feeling of other users on the web: it's somehow connected to some Windows updated published these days.I would appreciate any help on this matter.--AndréE-mail address is removed from the privacy *.Hi, Tadasha. Thanks for the reply.
In regards to KB 2770917 updates, I already installed it on my Win 8 as well as others (I keep the OS always up to date). So it has not really helped but thanks.On the tip of the gob0nkers is not really the case here, because I don't want to set a wallpaper of single lock for each user (in fact I had already read his answer to the question of ch). So far I have found no article on the web by offering an effective way to work around the problem.What I've done: created another user profile and abandoned the old (who introduced the problem). I think that it is related to the file the user AppData or something.So far things are working well with the new profile of the user.Thanks for the help! -
Dreamweaver CS5 install error on win7
Hi, I recently installed win7 and tried to install my purchased copy of Dreamweaver CS5 upgrade (I had Dreamweaver 8)
I get these errors during the install process;
I hope that there can someone advise me, because Adobe seems uninterested in doing customer support by phone an easy exercise
Best regards, Willem.
-----------------------------------------------------
ADOBE dreamweaver install errors
--------------------------------
the 12/1 (Jan.) / 2015 reinstall XP to Win7
Exit code: 7
Please see the faults and warnings below for troubleshooting. For example, ERROR: DW050... WARNING: DW016, DW036...
-------------------------------------- Summary --------------------------------------
-0 fatal Error (s), 26 (s), 32 warning (s)
WARNING: DW016: NOTE: cannot set the payload {D7BF3B76-EEF9-4868-9B2B-42ABF60B279A} Microsoft_VC80_CRT_x86 1.0.0.0 action such that she is already being updated by the payload {92D58719-BBC1-4CC3-A08B-56C9E884CC2C} Microsoft_VC80_CRT_x86 2.0.0.0
WARNING: DW016: NOTE: cannot set the payload {D7BF3B76-EEF9-4868-9B2B-42ABF60B279A} Microsoft_VC80_CRT_x86 1.0.0.0 action such that she is already being updated by the payload {92D58719-BBC1-4CC3-A08B-56C9E884CC2C} Microsoft_VC80_CRT_x86 2.0.0.0
WARNING: DW016: NOTE: cannot set the payload {D7BF3B76-EEF9-4868-9B2B-42ABF60B279A} Microsoft_VC80_CRT_x86 1.0.0.0 action such that she is already being updated by the payload {92D58719-BBC1-4CC3-A08B-56C9E884CC2C} Microsoft_VC80_CRT_x86 2.0.0.0
WARNING: DW016: NOTE: cannot set the payload {D7BF3B76-EEF9-4868-9B2B-42ABF60B279A} Microsoft_VC80_CRT_x86 1.0.0.0 action such that she is already being updated by the payload {92D58719-BBC1-4CC3-A08B-56C9E884CC2C} Microsoft_VC80_CRT_x86 2.0.0.0
WARNING: DW016: NOTE: cannot set the payload {D7BF3B76-EEF9-4868-9B2B-42ABF60B279A} Microsoft_VC80_CRT_x86 1.0.0.0 action such that she is already being updated by the payload {92D58719-BBC1-4CC3-A08B-56C9E884CC2C} Microsoft_VC80_CRT_x86 2.0.0.0
WARNING: DW016: NOTE: cannot set the payload {D7BF3B76-EEF9-4868-9B2B-42ABF60B279A} Microsoft_VC80_CRT_x86 1.0.0.0 action such that she is already being updated by the payload {92D58719-BBC1-4CC3-A08B-56C9E884CC2C} Microsoft_VC80_CRT_x86 2.0.0.0
WARNING: DW016: NOTE: cannot set the payload {D7BF3B76-EEF9-4868-9B2B-42ABF60B279A} Microsoft_VC80_CRT_x86 1.0.0.0 action such that she is already being updated by the payload {92D58719-BBC1-4CC3-A08B-56C9E884CC2C} Microsoft_VC80_CRT_x86 2.0.0.0
WARNING: DW016: NOTE: cannot set the payload {D7BF3B76-EEF9-4868-9B2B-42ABF60B279A} Microsoft_VC80_CRT_x86 1.0.0.0 action such that she is already being updated by the payload {92D58719-BBC1-4CC3-A08B-56C9E884CC2C} Microsoft_VC80_CRT_x86 2.0.0.0
WARNING: DW016: NOTE: cannot set the payload {D7BF3B76-EEF9-4868-9B2B-42ABF60B279A} Microsoft_VC80_CRT_x86 1.0.0.0 action such that she is already being updated by the payload {92D58719-BBC1-4CC3-A08B-56C9E884CC2C} Microsoft_VC80_CRT_x86 2.0.0.0
-Payload: {08D2E121-7F6A-43EB-97FD-629B44903403} Microsoft_VC90_CRT_x86 1.0.0.0.
ERROR: The system cannot read the specified device.
ERROR: Install payload MSI failed with the error: 30 - the system cannot read the specified device.
MSI error message: the system cannot read the specified device.
WARNING: DW036: payload cannot be installed due to the failure of the operation dependent
WARNING: DW036: payload cannot be installed due to the failure of the operation dependent
WARNING: DW036: payload cannot be installed due to the failure of the operation dependent
WARNING: DW036: payload cannot be installed due to the failure of the operation dependent
WARNING: DW036: payload cannot be installed due to the failure of the operation dependent
WARNING: DW036: payload cannot be installed due to the failure of the operation dependent
WARNING: DW036: payload cannot be installed due to the failure of the operation dependent
WARNING: DW036: payload cannot be installed due to the failure of the operation dependent
WARNING: DW036: payload cannot be installed due to the failure of the operation dependent
WARNING: DW036: payload cannot be installed due to the failure of the operation dependent
WARNING: DW036: payload cannot be installed due to the failure of the operation dependent
WARNING: DW036: payload cannot be installed due to the failure of the operation dependent
WARNING: DW036: payload cannot be installed due to the failure of the operation dependent
WARNING: DW036: payload cannot be installed due to the failure of the operation dependent
WARNING: DW036: payload cannot be installed due to the failure of the operation dependent
WARNING: DW036: payload cannot be installed due to the failure of the operation dependent
WARNING: DW036: payload cannot be installed due to the failure of the operation dependent
WARNING: DW036: payload cannot be installed due to the failure of the operation dependent
WARNING: DW036: payload cannot be installed due to the failure of the operation dependent
WARNING: DW036: payload cannot be installed due to the failure of the operation dependent
WARNING: DW036: payload cannot be installed due to the failure of the operation dependent
WARNING: DW036: payload cannot be installed due to the failure of the operation dependent
WARNING: DW036: payload cannot be installed due to the failure of the operation dependent
ERROR: DW050: the following payload errors were found during the installation:
ERROR: DW050:-Adobe CS5 Infrastructure CSXS: installation failed
ERROR: DW050:-Microsoft_VC90_ATL_x86: installation failed
ERROR: DW050:-Adobe Media Player: installation failed
ERROR: DW050:-SiteCatalyst NetAverages: installation failed
ERROR: DW050:-Microsoft_VC90_CRT_x86: installation failed
ERROR: DW050:-DeviceCentral_DeviceCentral3LP-en_US: installation failed
ERROR: DW050:-Adobe Player for Embedding: installation failed
ERROR: DW050:-AdobeHelp: installation failed
ERROR: DW050:-the Committee of Adobe CS5: installation failed
ERROR: DW050:-Microsoft_VC90_MFC_x86: installation failed
ERROR: DW050:-CSXS Extension history: installation failed
ERROR: DW050:-Suite Shared Configuration CS5: installation failed
ERROR: DW050:-Adobe CS5 language: installation failed
ERROR: DW050:-DeviceCentral: due to a lack of Language Pack installation
ERROR: DW050:-Adobe CS5 Extensions CSXS: installation failed
ERROR: DW050:-HIL help search: installation failed
ERROR: DW050:-Adobe Dreamweaver CS5: due to a lack of Language Pack installation
ERROR: DW050:-Microsoft_VC80_MFC_x86: installation failed
ERROR: DW050:-Microsoft_VC80_MFCLOC_x86: installation failed
ERROR: DW050:-Adobe Dreamweaver CS5_AdobeDreamweaver11en_USLanguagePack: installation failed
ERROR: DW050:-CS5 Adobe Extension Manager: installation failed
ERROR: DW050:-AdobeJRE: installation failed
ERROR: DW050:-Adobe ExtendScript Toolkit CS5: installation failed
ERROR: DW050:-Adobe AIR: installation failed
-------------------------------------------------------------------------------------
Errors ' Exit Code: 6, "" Exit Code: 7 "|"» CS5, CS5.5
Mylenium
-
CS5 trial install error - insert the disc?
I have successfully downloaded a Photoshop CS5 trial, but when trying to install the progress bar stops at 0% and I get a message that reads "Please insert photoshop cs5 disk to continue. Obviously I don't have the disk, because it is a downloadable trial. When I cancel the installation, I get a long list of error codes that starts like this:
Exit code: 24
-------------------------------------- Summary --------------------------------------
-0 fatal Error (s), 42 (s), 0 warning (s)
ERROR: Payload Set cancelled status
ERROR: Payload {007A2A28-D6A8-4D91-9A2B-568FF8052215} has an action 'install', but not resultState
ERROR: Payload {02731921-5711-4E7A-A898-D6BCF0F2A1CD} has an action 'install', but not resultState
I stumbled on one or two other people who have this problem, but especially windows machines, so I failed to find an answer to this problem. a few explanations I've found are too technical for me to understand, I'm not a computer genius. One thing I noticed is that sharing options and permissions in the menu 'get info' install folder are grayed out and cannot be changed. By clicking on the padlock does not allow me to make changes as usual. Access to my user (admin) privileges are read, write, and read only for 'personal' and 'everyone '. Don't know if it's something to do with it, but I read another case where changing these settings solves the problem. I have tried to re - download the trial and move to new, but that has not worked.
Help with this problem would be appreciated.
Thank you
I think that this happens if there is more than a mounted Installer. Have you tried to restart your entire system, reassembly of the installer, and then try to reinstall?
-
Hello, I did a disk eraser and reinstalled everything (to clean computers), then when I had to reinstall firefox I had a problem. I play a game called Fallensword. He has a script called Fallenswordhelper. So I installed GreaseMonkey, then when I tried to install the scripts said "Script cannot be installed error: failed @require json2.js. I did it for my computer every year since I started to use computers. I've never had this before. Please help me to get a fix for this, because I google it and cannot find an answer.
I am the original author of FallenSwordHelper. It was due to some changes in GreaseMonkey 0.9.0, which made it impossible to have local scripts.
I did an update (temporary?) so that extra all scripts (such as json2.js) now use absolute URLS.
See also the official website of FSH
-
a Lexmark 7600 Series printer will not print - cant install error 0x000003eb
I can't print with my wireless lexmark 7600 printer, we have changed the ink cartridges, which is what I thought the problem was and I bought lexmark ink cartridges. I have now uninstalled the printer and installed it again, in the end, it gives an error message saying it can't install error 0x000003eb. She completed the page alignment ok, we know what to do next, or what may be wrong, I followed all the advice of troubleshooting without result!
Hello
1. what operating system do you use?
2 did you change on your computer?
3. that all troubleshooting have you tried?
Method 1:
If you are using windows vista, I suggest you to follow the links and check out them.
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
Network printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
Method 2:
I also suggest you to contact the manufacture of your printer and check.
http://support.Lexmark.com/index?channel=supportAndDownloads&page=home&locale=en&UserLocale=en_US
-
Vista SP2 x 64 install error "0xc0190036 517/97646 (explorer.exe)" _
I'm trying the upgrade of vista x 64 sp1 to vista sp2 x 64. When the system tries to restart, it crashes with the error "0xc0190036 517/97646 (explorer.exe). I have to hard start and do a restore.
I tried several suggestions over a period of 3 days. One of the suggestions was to run chkdsk. This is the error I get when I run chkdsk: "explorer.exe entry index in the index file 35 $I30 are incorrect." If I run chkdsk /f it says it removes the entry and then explorer.exe is an orphan. When I reboot and running chkdsk /f even once, I get the same messages.
Is the vista sp2 x 64 install error and the error from chkdsk associated. What should I do?Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009 (i.e. less than 2 weeks). Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Dear Sir/Madam,
I installed MS XP HOME in my PC, but the updates are not installing. error 0 * 80240036 & 0 * 80244019 make their appearance, help to solve.
Kind regards
Joseph
Look at the tricky300 post in this thread.
-
Service Pack 3 won't install, error Code Ox87FFO54F
Service Pack 3 is not installed
Thanks for the effort, but I have now tried several times after defragmentation and registry cleaner - always also translates impossible to install - error.
Given that my knowledge is limited, I have now decided to take my computer to a local agency to try to solve the problem, but I thank you for your suggestions.
R Bee Walker
-
Security KB2656307 & KB 2656353 update fails to install error Code 0 x 643
22/04/12 the site Windows Update sent back message «...» Microsoft could not complete installation a security update for Microsoft NET Framework 1.1 to the release of Windows XP message "some updates were not installed" error Code: 0 x 643
When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
http://support.Microsoft.com/kb/923100When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
http://support.Microsoft.com/kb/976982 -
original title: KB2631813 for Windows XP security update has failed repeatedly to install
Update KB2631813 for Windows XP security repeatedly failed to install - error code 0 x 8007003. All other updates install successfully. None of the proposed solutions have worked so far including clear update history.
should [1] I really KB2631813?
[2] my computer seems not to like it.
[3] do you think that KB2631813 is really all this effort?
A1. Yes, as much as you need at every update of safety critical other.
Note that the vulnerability being patched (e.g., MS12-004) requires KB2598479 and KB2631813 to install! IOW, your computer is still vulnerable to the exploit if if KB2631813 is not installed.
A2. Your computer 'loved' KB975562 (which is replaced or replaced by KB2631813), so it should also 'like' KB2631813.
A3. Is the security of your computer and data to this topic (e.g., banking online & credit card passwords) really this effort?
Repost...
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
-
Security update for Windows XP (SP3), KB977914, install, error Code: 0xD0000135.
Can someone provide a fix for the error Code: 0xD0000135? I tried to update 5 times since 09/15/11.
Thank you very much.
Cynthia
Hello
first of all – have you tried to download and install this update manually? If this isn't the case, you can download it from here (the good language):
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=16170
LC
WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ )
How to back up and restore the registry in Windows
Hope the information is useful.
Maybe you are looking for
-
Compacting files: I get the message, "not enough disk space.
Compaction stops, a message on "not enough disk space. I tried to delete the .msf file and also delete "inbox." Nothing works.
-
No sound when playing html5 video
Hello! I have a html5 video that is great in all browsers, but there is no audio data in Firefox for Windows 3.6.25Yes, I have updatet my server with the following MIME: AddType audio/ogg .ogaAddType video/ogg .ogvAddType video/mp4 .mp4AddType video/
-
Satellite A500-132 - games does not work on the mode full screen (Windows 7 64-bit)
everything works fine... videos, applications... everything is very good...also, I downloaded all the drivers and all work fine...but when I installed a game and wanted to play, he began not as a large screen, there was a void balck space left and ri
-
When I cut a window in this Web site, https://www-k6.thinkcentral.com/ePC/viewResources.do?method=retrieveResources the OS crashes and I have to restart. It seems to work in all other Web sites. Help!