Saving graphics data

Similar Questions

• using the toll sytem of professional backup backup, XP my documents and settings, are saved outlook data files

  using the toll sytem of professional backup backup, XP my documents and settings, are saved outlook data files

  Hi cmoore2685,

  ·         You get the error message?

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  How to use Backup to protect data and restore files and folders on your computer in Windows XP and Windows Vista

  http://support.Microsoft.com/kb/309340

  For reference:

  How to back up and restore Outlook Express data

  http://support.Microsoft.com/kb/270670

• need the simple way to set the computer back to factory settings, and already saved safe data

  need the simple way to set the computer back to factory settings, and already saved safe data

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Daylight Saving Format Date/Time String vs get time in seconds

  Hi all

  I have developed a real-time application using a cRIO 9074 which has two loops. The first gathers data and records the time using the module of ' string of Format Date/time ' with the following time sting: '%d/%m/%Y % H: %m ". The output is a sting with mouth/day/year hour: minute.

  The second loop Gets the cRIO time using the module "get Date/Time in Seconds ' and the output of timestamp is sent by a shared variable for an application that is running on a local computer.

  The problem started Sunday last with DST. With the help of MAX I am able to see that the time of cRIO is bad (1 hour less) and that him "automatically adjust clock for daylight saving time" is not checked and gray, so I am not able to change it.

  The time of the first loop by using the "Date and time Format string' returns the time elapsed between the cRIO (1 hour late), however the time of the second loop is OK. I have manually corrected time using MAX, so now the first loop is correct, and the second is now over an hour.

  Any ideas?

  Dear RavensFan, thank you very much for your answer.

  However, this was not the problem. Apparently the result with or without the element of DST is the same. I solved the problem, for now, by changing a parameter not on the function "get Date/Time in Seconds" but on the time stamp indicator.

  By right clicing the indicator and go to the display Format and the advanced editing mode, I have changed the Format string to a universal time container of this: %< %="" h:="" %m="">< t="" %="" ^="">< %="" h:="" %m=""><>

  Apparently the time from the 'get time in seconds' is still an hour longer, but now it is correctly displayed.

• Graphics output using graphics data

  Hi all

  I have a signal in the range of 0 to 1000 mV that I am aquring using my device to acquisition of data usb or over a period of time.

  Let's say I'll connect the DAQ Assistant for the waveform table and display the signal on the chart.

  The graph will plot v vs time and after about 60 seconds of acquisition (for example), now I want to analyze the data on the chart "visually", using my eyes, then choose a few points (x, y) graph so to use for calculations in my vi.

  Is it possible in labview to click on points on the graph using my mouse and then take the value 'x' (because I'm only interested in the information of the x-axis) which represents the relative time in my case and then undergo calculations using this value?

  I'm new to labview so forgive me if this function is already there, but I don't know how to use it.

  Thanks in advance

  Concerning

  Shady

  LV 2010 version attached.

  I suggest to read the help on graphics and check out a few examples (help > find examples and search for table or graph).

  Graphics will store only a finite amount of data (defined by the length of history, default = 1024) but require very little work on your part. You give it just a scalar (or a table if you want to display the serveral tracks) and it will be updated to the x axis, scroll, etc. Because it loses data, I guess that's why NOR did not bother with the sliders, but I don't know.

  With a Simple graphic, you will need to feed the WHOLE track, so if do you it point by point, you should have to add each value in a table, feed this table updated the graph. A bit more complicated for a novice like you, but not that hard. Yet once, check the examples. But you could show the sliders (the visible elements > cursor legend) and read the mouse XY coordinates without programming.

  Good luck!

• Link z scale graphical data without autoscale marker of intensity

  When directly change us the value of marker without autoscale, no change can take place on the route of the graph of the intensity of. So, how can we link the values of the scale marker z for the data displayed on the ground?

  To be more precise, because many people may prefer that they have the graph of the intensity for different sets of data with the same z scale so that they can very easily compare visually the value z-scale to compare the color. But for the different sets of data, they can get different and AutoScale will result in trouble for the same z scale.

  However, when deactivate us autoscale and just do the scale marker z the same, in fact the graph will be is more really connected with the plot and making it impossible to compare the values of z of the plot.

  I tried to change the beach instead of the brand, but it does not work for scale z that when we get a negative value for the location of marker z scale, the graph only get something very weird as only black and white.

  So, how can we define two graph of intensity at the same z scale and z scale and at the same time markers have the graph link to the data we have?

  Hi weirpenguin,

  Please see the new example. I changed it to LabVIEW 2009 and U8.

  If the graphic is U8, it means that data cannot be outside the range of 0-255 anyway, right?  U8 is only 0-255. Then why grow you to be larger than 0-255 range?

  Kind regards

• Manual change of graphic data at run time

  Hello.

  And thanks in advance.

  Im trying to put on a mask limit on a chart in a similar way to 'Set' tab on the 'configure mask and limit the tests' expresses labview vi 2012.

  Does anyone know of a way to move the data points on a chart xy running directly?

  For example: say a plot of frequency xy with 10 points from 100 Hz to 1000 Hz and I want to change the value set to 200 Hz.

  I would like to use a graph xy controller, point my pointer of the mouse at 200 Hz and Marc data point sandbox to my desired value.

  Here is a screenshot of the above express vi. In this document, you can draw the dots on white graphics wherever you want in

  the graph.

  It would be good that I could do the same thing on a normal xy chart

  Any help will be appreciated

  Thanks in advance

  Chuck

  How about this? The downside is having to create a finite number of cursors for your chart first.

  1 create the initial track XY data. To scroll the corresponding sliders and set their positions.

  2 allow dragging of sliders. The time-out period of the structure of the event, replot the "new route" between the positions of the cursor.

  3. the pressing update, set the data of the main plot equal to the position of the sliders.

  

  LV2012 example of a seal.

• distinguished saved all data by sharing the deskop

  Hallo!

  any computer desktop or between two clients sharing application session is open.

  Do someone knows where this session data saved?

  Wharton is the end of a session?

  Someone automatically deletes the data?

  Thanks for help

  Susanne

  Hi Susanne,.

  You use any third-party application to share two computer or Microsoft remote desktop sharing?

  Ideally, when you connect two computers by using desktop sharing programs, the connection is trying to establish a secure connection and there will be no data transfer unless you try to discuss or to save all files.

  If you use a third-party application sharing, you can communicate with the support of the application for more information.

  Provide more information so that we can help you.

• Graphical data are protected

  For some reason, the option data is protected in my graphic tool. Never had a problem with it before.

  Any chart type, I choose the option 'data' field is protected.

  Is there a way to reset it or fix it?

  hard to say

  Did you have a second monitor at any given time?

  Or - maybe it's the opening, but almost all off the screen, check around the edge of the window in illustrator to see if there is a tiny section of it you can drag in?

• InDesign saved alert date and time

  Hello

  Is it possible to get information on the indesign last saved time and date using javascript/applescript?  I wanted to say to choose the folder where the indesign file and find the date and modified time. I'm on Mac.

  Is this possible? Thought .getenv $ or Date() new coding involved!

  Kind regards

  Kitty

  Is that what you are looking for?

  var myFolder, myInDesigeFiles, idFilesDetails = [], l, f;
  myFolder = Folder.selectDialog ("Pick your ID folder");
  if (!myFolder) exit();
  myInDesigeFiles = myFolder.getFiles("*.indd");
  l = myInDesigeFiles.length;
  while (l--) {
      f = myInDesigeFiles[l];
      idFilesDetails.push({name: File.decode(f.name), modified: f.modified.toString(), m: +f.modified})
  }
  idFilesDetails.sort(function(a,b) {return a.m < b.m});
  $.writeln(idFilesDetails.toSource().replace(/\),/g, "),\n"));
  

• Graphic data retention for VCenter 5 device

  Hi all

  I noticed a month previously, our graphic retention went up to 1 month of data collection.

  I used to have all the months of graphs since installation.

  I read somewhere that you could go to:

  vCenter Server Settings-> data retention policy.

  It has been verified to 356 days. I unchecked to see if it worked and restarted.

  Nope.

  Something has changed since installation, and what I can't understand.

  I did the last update, hoping that would help, but it didn't.

  Does anyone know where I could solve this?

  Thank you!

  Now, it's a problem...

  The best solution for your missing perf stats must publish the next update:

  DB2 "update VPX_STAT_INTERVAL_DEF set INTERVAL_LENGTH = 31536000 where INTERVAL_SEQ_NUM = 3".

  Unfortunately this will not restore your data of perf, but you won't have the same problem with the lack of statistical data.

• Saved form data is there but not visible without clicking on the field?

  I created a PDF form, I've done it is possible to save the form with the data entered so that the customer can fill out and email me back filled form. When I got back, the information was there, but I had to click on each field to see what he says. And another strange thing, the preview of the file in my mac mail e-mail has filled fields and showing. It appears on 3 computers in my Office I know its not just mine. It does not print with the data included. Any suggestions?

  She was probably saved with the application on the Mac, as opposed to Adobe Reader or Acrobat. Overview really sucks for PDF forms and is actually evil because it causes all kinds of damage. You are watching only one aspect of it. For more information, including some things that you can do to reverse some of the damage, see: http://kb2.adobe.com/community/publishing/885/cpsid_88564.html

• Graphics - Data Source selection

  Hello
  
  If anyone can help, I'm combining a PivotTable with a graphic. I do not wish for all elements of PivotTable on the graph is displayed. Is there a way to limit the data (columns) source to appear on the graph?
  
  There is a page drop-down option and I want the PivotTable to stay with the table to reflect the choice of filtering users.
  
  Thank you

  do you mean you use the PivotTable?

  If so, it is not possible, 2 different pivots or 1 pivot and 1 graph...

• Saving raw data with PCI-6259

  I think registration of raw data because the resolution max of 16-bit card and DAQmx Read gives me a 64-bit (converted to 32-bit) value. It's the waste of hard drive space.

  However, I couldn't find any information on the format of the raw data of this card. If it is interlaced?

  If you use raw data from the function of reading DAQmx version you get an array of 16-bit data (signed or unsigned (you have your choice) that's exactly what comes A/d.) To convert the data in engineering units, you also have to record the value of the scale you can do the conversion yourself.

  If you read several channels, the first element is the channel 1, the second is channel 2, the third is channel 3 and so on.

  Mike...

• saving digital data (its back to front)

  Hi guys,.

  Im trying to record data of several numerical indicators on my Panel before every second, I want to connect to a separate column in a tab file so they can be imported to Excel.

  I work but data are backwards, that is to say my first readings are at the bottom of the spreadsheet and my recent readings are above.  How can I activate the table upside down before I write it to file.

  I also want to add a header or a title to identify each collum?

  I have attached a picture of this part of the program. Cheers, Zac

  Reverse all the entries on your building table.  But the work to register on the top wire and the wire of the local variable on the bottom.

  Should you local variables?  Source of data?  You can set yourself to a race condition.

  Rather than having everyone build tables, you can build an array of new data.  Then, put the data on a single 2D table that passes through the shift register.  It will eliminate 12 records 13 offset and a lot of wiring.  You do not have the table of conversion after that.  You'll just have to check the table in a way you can't build because the lines become columns, and vice versa.