Saving settings of the camera when NEITHER-MAX is closed

I'm currently building an application with a G504B of Manta, which is compatible NI_IMAQdx. I have problems with the UserSetDefaultSelector attribute. This attribute is supposed to define the power of the default settings. Here is my sequence of steps:

Open NOR-MAX, select the camera from Manta and change certain attributes such as ExposureTimeAbs to 68000, UserSetDefaultSelector to UserSet1 and UserSetSelector to UserSet1.

Then, I select the UserSetSave and press the Execute button that appears.

Then I close OR MAX. At this point a popup confirm save appears asking me if I want to save my settings. Thinking that I already have (see previous step) I click on the No button.

When I reopen it OR MAX, my default selections are not there.

If I chose the Yes to the window confirm save, then the UserSetDefaultSelector settings are saved.

What are the additional steps OR MAX when I click the Yes button for the popup confirm save? Why is it not sufficient UserSetSave attribute to change the attributes of the camera?

Hello

For the CIM, see here

C:\Users\Public\Documents\National Instruments\NI-IMAQdx\Data.

You should know that when you use your camera in labview, the CIM allows LabVIEW set the default parameters of the device. But you can access CIM with IMAQdx write attributes and the attributes of reading IMAQdx

Concerning

Tags: NI Hardware

Similar Questions

  • My Windows 7 32 bit are more recognized the camera. I ' ve re - run the installation disk but it still don't collect the camera when I connect it to the ISB port.

    My Windows 7 32 bit are more recognized the camera. I ' ve re - run the installation disk but it still don't collect the camera when I connect it to the ISB port.

    You can check with the manufacturer of the camera, whoever it is.

    You can also remove the memory card and put it in a card reader that plugs into a USB port.  If you do not, you can buy them for about $3 in computer stores.

    Good luck.

  • Mac Mavericks. Camera raw 9.1. Camera Nikon D810. How to set the default settings of the camera profile standard (now available after downloading the camera profile and copy it into the appropriate file)? Is it possible to apply also in the pictures showe

    Oops... did not write the question where I... How to set the default settings of the camera profile standard (now available after downloading the camera profile and copy it into the appropriate file)? Is it possible to apply too in images showed in the bridge? I'm a newbie in the forums and I'm not sure how to proceed.

    You can right click and copy the settings on an image that has the right profile. Then highlight all the images that you want to edit, right click and paste the settings. On the list that is displayed, simply choose the camera calibration.

  • I got a new lens a Carl Zeiss and now in lightroom I lost resolution and all the information of the camera when I post a picture! The camera is a Sony a7R can you help me?

    I got a new lens a Carl Zeiss and now in lightroom I lost resolution and all the information of the camera when I post a picture! The camera is a Sony a7R can you help me?

    Look at the base this workflow

  • Defy 2.2.2 - no pictures of the camera when the flash fires

    After the last update 2.2.2 I see the following problem: when the flash goes off while taking a picture, the result is a completely black image. she faces no flash photo is fine. Please notify. I restarted the phone, but it does not help.

    Have you tried to erase the camera application cache in the settings?

  • How to set the preview of the camera when the screen is rotated?

    I have a ForeignWindowControl with the control of the camera and when I turn the device, the user interface controls on the screen are properly redrawn but the preview camera does not turn properly.  a little weird.

    What I need to adjust the size of ForeignWindowControl you turn so full so how?

    not serious.  the reference to coordinate for display has been turned, so you must rotate your viewfinder window handle of window screen.  who should sort.  I guess you see a compressed laterally viewfinder.

  • eject the camera when no disk on the desktop icon

    How to eject my camera after that import photos into iPhoto, when there is no disc on the desktop icon and not eject from the menu file finder?

    Ed,

    Read the excellent advice provided by leonie in how "eject you" a camera or such a device of the photos app after import?

  • external hard drive mounts as the camera when you import videos in FCPX

    When I try to import media into FCPX, my external HD rises like a camera and never displays anything (tricks and spins forever).

    I have other external HD pairs and they mount as expected when you import. I can get to the external HD in question, it is just when I go to import items I hit a snag. I make changes to the properties of my library and changed back. Still have a problem. See screenshot of the Properties window and the import library. I'm sure I'm missing something simple, but I was not able to sort out what I did. Thanks in advance,

    Joan

    https://goo.GL/photos/k5i9oMrsvDhgreEF9

    P.S. I'm under OX 10.10.5 on a MacPro early 2009

    IN the Finder, locate a folder with the name private. If you see a move, it is not at the root or rename it.

    RUss

  • Windows 7 not able to remember my settings of the mouse when I alternate mouse

    I have problems with Windows 7 when I plug in 2 different mice at different times.  I take my laptop to work and I plug a USB mouse here at home I plug in a different mouse (the two Microsoft, various models).

    My problem is that windows does not remember the specific settings for each mouse.  When I go into control panel-> devices and printers, I can see that windows detected correctly where I used the mouse.  However, when I right click and go to "Mouse settings" and click on the tab "buttons" 2nd (there are 2 tabs, after you have installed the mouse drivers), the tab from the drop-down menu 'Connected the device' is unchanged: it never gets changed automatically.

    So when I get home, I have to choose my mouse (comfort optical 3000) and choose the right setting for the thumb touches (or "expand button", according to windows).

    When I get to work, the scroll wheel does not work in all applications, so I have to go to settings, then choose the right mouse...


    Is there anyway I can avoid this clicking repetitive?  If windows 7 should not be able to automatically detect it along for the mouse settings and use the previous settings for this mouse?


    Thank you


    Jeremy

    Hey Jeremy,

    This could be due to third party settings and windows settings conflicts. To avoid the same, uninstall all conflicting mouse software.

    Method 1: Uninstall all conflicting mouse software

    If you have any other software mouse that is installed, such as the Logitech software or touchpad, this software can conflict with the IntelliMouse software. To uninstall other software, follow the appropriate procedure for your version of Windows.

    Open programs and features in Control Panel. To do this, follow these steps:

    1. click on start
    2. in the search box, type appwiz.cpl.
    3. press ENTER.
    4. Select the software and then click on uninstall.
    If you are prompted for an administrator password or for confirmation, type the password, or click on continue.

    Method 2: Run a "clean" boot, and then reinstall the IntelliPoint software

    Step 1: Restart the computer by using a clean boot

    When you start Microsoft Windows, other software may start with the operating system. These programs may include antivirus and system programs that may interfere with your mouse. When you perform a clean boot before you start the installation, you prevent these programs from starting automatically.

    1. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
    If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
    2. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available).
    3. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
    4 restart your computer.

    For more information:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135

    Step 2: Remove and reinstall the IntelliPoint software

    1. to do this, follow steps 1-3 in method 1.
    2. click on Microsoft IntelliPoint.
    3. click on uninstall/change.

    If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
    4. click Yes to confirm that you want to remove the program.
    5 restart the computer.
    6 reinstall the IntelliPoint software.

    You can download the software for your edition of:
    Download mouse and keyboard software

    For 32-bit Windows 7:
    http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=MK&type=mouse&name=D1T-00002&OS=Win7_32&lang=en

    64-bit for Windows 7 driver
    http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=MK&type=mouse&name=D1T-00002&OS=Win7_64&lang=en

    Once the download is complete, install the appropriate software and see if that solves your problem.

    Additional help:

    The problems with the mouse button or scroll the parameters
    http://support.Microsoft.com/kb/303091

    Once you have finished installing, follow these steps to reset the computer to start as usual:

    1. click on start, type msconfig.exe in the start search box and press ENTER.
    If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
    2. on the general tab, click the Normal startup option, and then click OK.
    3. When you are prompted to restart the computer, click on restart.

    Does this solve your problem? Post back and we do know.

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Saved changes to the workspace when the PS is restarted (PS CS6 13.0.1 x 64)

    Hello

    I'm having the problem that my saved workspace changes each time I open Photoshop. I have organized as I need it for work and recorded this workspace. As soon as I open PS even the basic structure is retained, but change the sizes of the windows, and so everything is not visible.
    This shows my saved workspace:

    ps-arbeitsbereich-1.jpg

    And that's the way it looks when the PS will open again:

    ps-arbeitsbereich-2.jpg

    I appreciate every idea how to fix this annoying. Thanks in advance.

    Oliver

    Yes, trash your prefs and let us know how it goes.

    -ST

  • Is there a way to change the camera settings if you do not see your own face?

    It may be a stupid and obvious question, but is there a way to change the settings of the camera on Skype, so you can see the other person and not yourself? He kills sort of the illusion of a conversation face to face when you have a clumsy mirror of yourself that you can not get rid of! I looked online for help with this and found nothing, and minimizes the cheat only I understand Skype altogether and end up with only a tiny picture of the other person. Looks like there must be a better way!

    Thank you!

    There is no option to remove the image of P - P yourself, but if you click on this image it will reduce to a small thumbnail image.

  • The camera missing after update settings

    Recently, I update my Attrix 4 g Android 2.3.2 to 2.3.4.

    Since then, some of the parameters of the camera app disappeared.

    The manual shows the options available in the settings of the camera must be: photo Res, Res video, exposure and review time, shutter your storage location.

    But only pic res res vid, exhibition, storage location are available since the update.

    I tried to erase the camera and cache application data, but no change.

    Any suggestions?

    Check the laws in your locality. After my experiences with Nokia N900 I found that it would be illegal to allow a photo from a phone without a tone of warning in some countries - so you are not given the option to completely disable the tone of the shutter.

  • Why can't enable HDR in the camera settings?

    Hello world. I want to activate the HDR to on in the camera, but I could not. I tapped on the HDR to turn it on, but it doesn't. Why?

    I use the manual settings on my camera. The parameters are: Flash off - resolution 15.5MP (16:9) - self-timer off - Smile Shutter off - Focus mode Touch focus - HDR is turned off and won't turn on - Auto ISO Image Stabilizer - Center of count - off - 3 seconds overview

    Launch quick launch one - Geotagging - Touch capture off - Volum use touch Zoom - on - data storage SD - Touch off block. .   Here's my manual settings for the camera. Why can't activate the HDR Mode on IT? Someone has an idea?

    Thank you very much.

    Hi Prodigy1,

    There is a limit of 8 megapixels, because the low light Exmor RS capabilities are optimized around this resolution. So to change the resolution of 8 megapixels or less and this should work.

  • HX850 - no adjustment of the image when using netflix

    Hello

    Is it possible to adjust the picture settings when using netflix? All the buttons on the remote seem to be blocked when netflix is running. It is very annoying because I can't disable cinemotion making all movies look like they were saved by a kid with some * camcorder.

    Adjustment of image quality with 'common' setting also does not affect the settings of the image when the netflix app is running.

    THX!

    Hello FA5_FLIP.
    Welcome to the community of Sony and thanks for the post.

    Setings photo on TV are not accessible when you watch Internet channels.

    Fact the image appears in poor quality when the various videos of Netflix streaming and streaming of various videos like YouTube, Amazon etc. Internet services?

    Are the same Netflix videos appear fine when transmitted in an another TV or computer?
    Check if the speed of the Internet meets the requirements of 2.5 Mbps for SD videos streaming and 10 Mbps for streaming HD videos.

    Try to update the Firmware of the TV to the latest version.

    Try to separate the TV from Netflix account and even add a link to it.
    Follow the steps below to remove the TV has Netflix.

    https://us.en.KB.Sony.com/app/answers/detail/A_ID/32176

    Thank you.

  • Twist to activate the camera does not

    Hello world

    My Moto X play does the camera when I double flips through the phone, he used to work, and although I rarely use it, it is a nice to have feature. It is enabled in the settings of the Motorola shares, but does not work. Everything in the phone seems to work fine including auto rotate which suggests that the phone is ok, movement detection. Any ideas?

    Hi and thanks! the bike of compensation app hiding solved the problem! now I can Karate chop and take pictures, thank you very much.

Maybe you are looking for