saying vprotect popup program does not work

Similar Questions

• The Magentic program does not work with newer versions of windows

  Original title: Programas compatibility application applications app applications Juego Juegos Heredado USO caudal Cuelgue Cuelgues

  The Magentic program does not work with newer versions of windows

  Hello danielbrauer,

  The magnetic site says the requirements are for Windows XP or higher. However, it is not on the Windows Vista or the Windows 7 Compatibility Center.

  You can try the following to see if it will help with compatibility. If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If this does not help, you can contact the magnet to see if they have an updated version.

  Sincerely,

  Marilyn

• Add/Remove Programs does not work with some programs in XP

  Why add and remove program does NOT work on some programs. These are programs on a computer that was created using a process of the image. Like ghost?

  If you have a third party app that will not uninstall, I think I might check the support page for this application and see what they have to say about it.

  Some AV products have obtained quite complicated that add/remove programs is not the recommended way to remove them, so some companies have developed their own removal procedures and some have special programs to manage their affairs.

  Norton/Symantec has a special page for you:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080416133836EN

  I see that just goes through Add/Remove programs too, but there is an option "what happens if it does not work" too (or post in the forums).

• My MSN mail program does not work

  My MSN mail program does not work. I had the computer at a Staples office supply store to get a verified cd drive. They said they were doing free computer cleaning. I said yes. When it was finished, I took the computer home and Premium MSN mail program would not be executed. Error messages say files are missing. I downloaded a file and then another message poped saying another file was missing. I got at Staples and I don't think they know how to fix it. I guess that the program needs to be reinstalled. My concern is that there are folders with important emails in them. They are erased if I re-install the program? Where should I go to re - install.

  Hi fla_bill,

  The question you have posted is related to MSN and would be better suited in the MSN support center.

  Please visit the link below to find a community that will provide the support ask you:https://support.msn.com/Default.aspx?&st=1&wfxredirect=1

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My antivirus programs does not work on Windows 7 64 x?

  I tried to install AntiVir, Avast, AVG and none work, before they did a month ago simply are prestalida I reinstall several times and tried several versions, so I guess that's the problem with Windows is the problem and that she would like to know, so that I can protect my computer, Windows Defender works but regular antivirus program does not work.
  as the blocked windows anitvirus programs?

  If you have a problem with AntiVir, then you should check the FAQ of AntiVir.
  If you have a problem with Avast, then you should check the FAQ of Avast.

  If you have a problem with AVG, then you should check the AVG FAQ.

  If you have a problem with Microsoft Security Essentials, then this forum is a good place to ask your question: http://answers.microsoft.com/en-us/windows/forum/windows_7-system

  In all cases, it is essential that report you what is happening. Say "none will work" is does not give enough information to draw conclusions of respondents.

• Recovery disc Creator program does not work

  I bought a new Tecra, because I have Nero to burn discs, I removed Sonic my system and after that I recognized that recovery disc Creator program does not work!
  I reinstall Sonic using Toshiba Application install, but nothing has changed and said: my recovery disc Creator program. "shortcut is broken!
  I searched the Forum, but could not find any solution
  is there anywhere to download recovery disk creator program?

  Hello

  the link is still present? If so, right-click on the shortcut and tell what program or the name of the program is linked. Maybe we can find something to take home your recovery disk creator.

  You know, that sounds really weird that a program always disappears after reinstalling the burning program sonic. Maybe it s just a special option or something that needs to be enabled.

  Welcome them

• Microsoft Fix Center 0 X 80092003 error message when you try to fix the hardware and drivers, the program does not work

  Microsoft Fix Center 0 X 80092003 error message when you try to fix the hardware and drivers, the program does not work. I use Windows Vista Home top.  Please provide me with a fix for this problem. Thank you

  Hello

  What type of material is actually causing the problem? Is there more information the Fix It center offers you?
  I would have a look at the article I have below the link and go ahead and run a update of Windows on the PC.
  http://support.Microsoft.com/kb/947821
  I hope this helps.

• Help, says report wireless radio does not work contact HP suport *.

  Help, says report wireless radio does not work contact HP suport *.

  Wireless on collar

  work wireless FAIL

  Reset your C7280 by turning it off, press and hold # and 6 keys while and shortly after turned it on.

  Now, run a Test of the front panel wireless network.

• Why CRYSTAL_REPORT program does not work with windows Vista? __

  Why CRYSTAL_REPORT program does not work with windows Vista?

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• I can't print. It says local print spooler does not work, restart the printer or machine.

  I use windows7, I can't print. It says local print spooler does not work, restart the printer or machine. I can not install, or add the printer currently installed in my computer. Help, please.

  Original title: printer

  Hello

  The print spooler is the mechanism that will interface between your application and the printer and coils (sends) the print job to the printer. It should start automatically when you start your machine. So, restart your computer and try again. I suspect that the real problem is to find why the print spooler has stopped in the first place.

  After trying again, see what happens and if your print spooler stops again, the real work will begin.

  Kind regards

  BearPup

• Problems with my sound doesn't play not even though the settings say that the audio does not work properly

  recently I went on vacation... sound computer works very well before I left. Came back, and now the sound does not work.  I checked all the settings and it says everything is working. I've done some research and there was only one window to come when I rebooted that says a file with the extension dll is not found.  So I restored by computer back to before I left on vacation, but still no sound.  No pop up with the dll is not found though.  I went in the "maintenance" section and found it seems to be a few questions audio below is the scheme which is the filler. Hope this is enough information for assistance.  said the task of event 20 116.  I have an ACER one with windows. the computer has HDMI dolby and realtek.

  -

  -

   

    20

    0

    4

    116

    0

    0 x 800000000000000

   

    3490

   

   

    Microsoft-Windows-Audio/PlaybackManager

    LorrainesPC

   

   

  -

    3

    48000

    fake

   

   

  Judy Hello,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand you have a problem with the sound does not work properly in the computer even if the settings say that the audio does not work properly.

  Certainly, I understand your concern and will try my best to help you.

  I appreciate all your efforts really to try to solve this problem.

  This issue would have intervened if the sound card has went wrong in the computer or audio drivers have been corrupted.

  I would suggest trying the following methods and check if that helps.

  Method 1:

  I suggest you to refer to the procedure described in the article below and check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: The above article will help you identify and solve its current problems in Windows, including no sound from your speakers or headphones.

  Also try to install the latest drivers from the chipset in the system and check if it helps.

  If the problem persists, follow method 2

  Method 2:

  How to use the tool File Checker system to fix missing or damaged system files, please follow the steps in the link provided below.

  https://support.Microsoft.com/kb/929833?WA=wsignin1.0

  Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article explains how to run the tool (SFC.exe) System File Checkerto scan your system files and to repair the missing system or damaged files from Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• HP Color LaserJet CP2025n Prin: I need to download the older driver because a program does not work with the new driver

  Where can I find the olderdriver that I can use windows 64 bits 10,

  because a program does not with the new driver.

  The year may be 2014 or almost.

  Your Timo

  @tisalmet

  Thanks for the reply with the details,

  You can activate the Device Manager to view hidden devices by following the steps mentioned below:

  To work around this behavior and display devices when you click Show hidden devices:

  1. Click Start, point to programs, point to Accessories, and then click command prompt.
  2. At a command prompt, type the following command and press ENTER:

     Set devmgr_show_nonpresent_devices = 1

  3. Type the following command a command prompt and press ENTER:

     Start devmgmt.msc

  4. Troubleshoot the devices and drivers in Device Manager.

  For more details: click here

  Uninstall all software and drivers for printers:

  When you need to uninstall a driver completely, the best and safest method is to use the uninstaller of the device (if it has one). If you have added the device to your system with a Setup program (as is the case with most of the graphics card and sound card drivers, for example), you can uninstall it as you would any other program.

  1. Click Start, type uninstall program, and then press enter.
  2. In the uninstall window, which appears, scroll through the list and find your device or drivers. Double-click the entry to start the uninstall process.

  Sometimes devices will not have an uninstall program or the uninstall program will not appear in the list. In these cases, you can use Device Manager to remove the driver completely.

  1. Click Start, type Device Managerand press enter.
  2. Find and double click on the category of the device you want to uninstall (for example, the graphic card would be listed under display card) driver.
  3. Right click on the device, and then click Uninstall.
  4. Windows prompts you to confirm the removal of the device. Click OK to remove the driver.
  5. Once the uninstall is complete, restart your computer as soon as possible.

  Once the above steps are done, click here to download the full software features for your printer and follow the Setup process to start to use your printer again.

  I would like to know if these measures worked for you.  If they did, it's great!  Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
  Good luck.

• Pay attention to the catalyst control center monitoring program does not work

  computer keeps displays the warning that monitoring program, catalyst Control Center does not work - what is it

  Hello

  ·         Did you make any changes before the show?

  ·         What operating system is installed on the computer?

  I suggest that you download and install the Catalyst Control Center from the AMD website and check if it helps.

  http://support.AMD.com/us/pages/AMDSupportHub.aspx

• Windows, download itunes says windows Installer updates does not work

  I too manage download of updates, get the errors for microsoft office 2007.  I tried to download the utility for him but can't even download that.  Says windows setup does not work.  I ran malwarebyes but still does not load them.  Can I reload windows vista without losing everything?

  Hi Jkfitz2,
   
  Welcome to the Microsoft Answers Forum community!

  first of all, I suggest you to re-register the windows installer. To do this, please follow the steps below:

  Step 1:
  
  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:
   
  1. in the menu 'Start', click on ' execute:.»
  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.
  3. in the menu 'Start', click 'run '.
  4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

  For more information, please see the link below:
  http://support.Microsoft.com/kb/555175

  Step 2:

  Also I suggest you to start the Windows Installer service.

  Steps to start the Windows Installer service:

  1. start, type Services.msc and press ENTER
  2. double-click click Windows Installer
  3. the value of the Windows Installer Manual startup type
  4. Click Start to start the service. Note the error message, if any.
  5. click on OK.
   
  If the steps above does not you can download the latest version of the windows package install autonomous from the link below.
  http://www.Microsoft.com/DownLoads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Also I suggest to restore the windows components update, try to fix it.
  Please see the link below to fix:
  http://support.Microsoft.com/kb/971058

  I hope this information helps. Please get back to us if you have any other questions on this subject.

  Thanks and greetings
  Mir - Microsoft Answers Support Engineer                                                              
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads

• back program does not work under XP

  When I try to open this accounting program, the command window opens and a text flashes on the screen, then it goes to a blinking cursor.  This program works very well under Windows 2000.  Is there a way to make it work in XP SP3?

  When I try to open this accounting program, the command window opens and a text flashes on the screen, then it goes to a blinking cursor.  This program works very well under Windows 2000.  Is there a way to make it work in XP SP3?

  Unlike earlier versions of Windows, Windows XP does not rest on the BACK, and as a result, Windows XP does not have a program to do many things that would allow BACK.

  On the other hand, is Windows 2000, such as Windows XP, based on Microsoft's NT operating system, and in general, a program that runs on Windows 2000 must run under XP.  You can compare, for example,
  Troubleshooting in Windows XP MS-DOS-based programs

  with

  Troubleshooting MS-DOS-Based in Windows programs (that applies to Windows 2000)

  and you will see that the documents are virtually identical.

  If the suggestions of "Troubleshooting" in the article XP don't help not (in fact, before judge you), see if you can get your old application work using the Compatibility Mode of Windows XP program.  If the configuration in Windows 2000 does not work, try Windows 95.