SBH20 LAG after a few seconds of inactivity

Similar Questions

• Stor.E access point stops working after a few seconds

  Bought a Stor.E wireless adapter and followed the instructions but after turn on the unit by connecting to USB power usage provides cables, access point WIFI disconnects after 4 or around seconds.
  1. I connect to usb power
  2. the indicator flashes in green and stays on
  3. wireless light turns green and stay on, turns off after a few seconds

  Managed to connect using the mobile app several times, while its sequel, but given that the WIFI point disconnects, can't use it.

  Any thoughts?

  1. I connect to usb power

  Stor.e wireless adapter must be connected to the power supply and the other end to the external HARD drive.

  

  Then, you can use the application to access the wireless content.

• Qosmio PX30t all-in-one: black screen after a few minutes of inactivity

  I just bought a new all in one Px30t and I have 2 problems with it causing me to nuts.

  I have a mouse battery that dies after 24 hours and the screen goes black after a few minutes of inactivity.
  I changed the settings of the display in standby, the Power Options etc everything I can think of it doesn't seem to make a difference.

  Can also someone point me in the direction of a manual online for the model.

  > The screen goes black after a few minutes of inactivity.
  Can bring back you to life somehow, or you need to restart your Qosmio?

  Usually the manual s user document is saved on the HARD drive (preinstalled original machine). Can find you it?
  Did you check support page to Toshiba for manuals online (Toshiba page for the country of purchase)?

• Satellite A110-180 - fan starts but stops after a few seconds

  Hello

  I have a Toshiba Satellite A110-180 and when I turn on the computer, the fan turns on but it stops in a few seconds and starts again in a while and stops again and starts... Then the laptop gets heat quickly.

  I bought the laptop about 5 years ago, so I think the problem is the fan or the circuit that controls the fan. Can someone who has had the same problem make sure that the fan is the problem?

  The fan part number is ATZHG000500. Does anyone know if a fan with P/N ATZHG000100 is compatible with my laptop, or if I can use another fan?

  Thanks for your help,

  Hey Wiley,

  First of all it of normal that the fan starts and after a few seconds, or 1 minute stops. Depending on the programs you run again the departure of fan after a few seconds or minutes. So, theoretically, it of normal what is happening.

  But if your laptop is almost 5 years old, you should try to clean. So I can recommend jet of compressed air. This could blow out the dust from the cooling fans. It is very cheap but very useful.
  Check it!

  In addition, I think that the thermal paste should be renewed a technicians authorized laptop can help you and answer if the other fan part number fits in your laptop. :)

• I have an iphone 6 s running ios 9.2.1 my wifi disconnection and after a few seconds that it reconnects, it happens most of the time, help me thank you!

  I have an iPhone running iOS 9.2.1 6s my wifi suddenly disconnects, and after a few seconds that it reconnects, it happens most of the time help me thank you!

  It sounds like you have a fancy for your apple WIFI products name prefer digital alpha without space.

• Satellite M100-165 cannot stop - turns on automatically after a few seconds

  Hello!

  I have the problem of identical or very similar to those described in the threads:
  Link: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=15325]
  Link: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=109125]

  When I try to turn off my Satellite M100-165 ("shut down" in Windows or even by pressing the power button while I'm in BIOS) it lights up after a few seconds. It lights when it runs on batteries. She also doesn't appear when I press the button for 4 seconds.

  I tried to recover the system with the recovery CD (Windows XP Home). I also tried with Windows Vista. Always the same.

  In fact I have BIOS version 2.90 (updated from version 1.90, as far as I remember) but with an earlier version, the problem exists also.
  I think when I got the version of the BIOS before 1.90 this problem did not exist (but I don't remember this version number).

  Thank you for any suggestions.

  Hello

  It's a very unusual question and, for me, there is not just some explanation. It will be interesting to know what Toshiba experts say on this subject. Make a call and let us know what they say.

  The strange is that the same thing will happen with two different operating systems. I can't say for sure why this happens, but your laptop is a bit confusing and of course change the shutdown with restart. If it is result of BIOS update service people should know about it.

• IPhoto 9.4.2 hangs on Macbookpro OSX 10.8.5 after a few seconds.

  IPhoto 9.4.2 hangs on Macbookpro OSX 10.8.5 after a few seconds.

  'Certain inconsistencies in the library'-> recover, but it does not help.

  What to do now?

  Here are the first lines of the report:

  Process:	iPhoto [66579]
  Path:	/Applications/iPhoto.app/Contents/MacOS/iPhoto
  Identifier:	com.apple.iPhoto
  Version:	9.4.2 (9.4.2)
  Update information:	iPhotoProject-710042000000000 ~ 2
  Item App ID:	408981381

  The external application ID: 11723545

  Code type:

  X 86 (native)

  Parent process: launchd [287]

  ID of the user:

  501

  Date/time:	2016-01-05 20:39:54.165 + 0800
  OS version:	Mac OS X 10.8.5 (12F2560)

  Report Version: 10

  Interval since last report:	14627 sec
  Crashes since last report:	2

  Per-App interval since last report: 994 sec

  Per-App crashes since last report: 2

  Anonymous UUID:

  049D7CBC-B1B5-12F4-7308-621A449425D7

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0x00000000c52f59f0

  VM regions near 0xc52f59f0:

  Shared CG images

  c 00000000 00000000 0001000 c 0009000 [32K] rw-/ rw - SM = SHM

  -->

  Shared CG images

  00000000c5b33000-00000000c5b3b000 [32K] rw-/ rw - SM = SHM

  Thread 0 crashed: Dispatch queue: com.apple.main - wire

  0 com.apple.JavaScriptCore		0x921123ae JSC::DFG:GPRTemporary:GPRTemporary(JSC::DFG::SpeculativeJIT*,_JSC::DFG::StorageOperand&) + 110
  1 com.apple.JavaScriptCore		0x92142dc4 JSC::DFG:SpeculativeJIT:compile(JSC::DFG::Node&) + 59684
  2 com.apple.JavaScriptCore		0 x 92113929 JSC::DFG:SpeculativeJIT:compile(JSC::DFG::BasicBlock&) + 889
  3 com.apple.JavaScriptCore		0x92115b85 JSC::DFG::SpeculativeJIT::compile() + 69
  4 com.apple.JavaScriptCore		0x9210001f JSC::DFG:JITCompiler:compileBody(JSC::DFG::SpeculativeJIT&) + 63
  5 com.apple.JavaScriptCore		0x92100e47 JSC::DFG:JITCompiler:compileFunction(JSC::JITCode&,_JSC::MacroAssemblerCodePtr&) + 231
  6 com.apple.JavaScriptCore		0x920fe73c

  iPhoto crashes on MacOS X 10.8.5, if you have enabled places.

  Do a test: If iPhoto will launch once you disconnect from the Internet, the solution is to disable access to Google Maps and disable places of research.

  The first versions of iPhoto 11 started to plant for many users suddenly last month.

  There is a problem with the functionality of the site, because Google maps will no longer be supported.

  See the solution of Huxly647:

  Huxly647 , November 20, 2015 12:05 AM
  Re: iPhoto crashes after opening several times in reply to carvermon Useful

  I found a solution that works for me...

  1 goto /Applications/iPhoto.app/Contents/Resources

  2 delete the files 'googlemap.html' and googlesearch.html

  IPhoto no longer crashes, site does not work, but it doesn't bother me too much.

  Let me know if it works for you guys...

  Deletes two files "googlemap.html" and the googlesearch.html of iPhoto application bundle prevents the JavaScript running inside and causing the accident.  Log of course do the same thing. So it's pretty clear that something happened at the end of Google.

  To access the files inside the iPhoto application select it in the Finder and ctrl-click on it. Then use the command "Show Package Contents" from the menu.  Open the content subfolder and then resources.

  Do not try this fix without making a copy of the iPhoto application before trying to delete the two files of the entire application.

• Why is it that whenever I log in, it takes me to the box of reception, then after a few seconds it switches me to the new e-mail page?

  Why is it that whenever I log in, it takes me to the box of reception, then after a few seconds it switches me to the new e-mail page?

  Hello

  You can also check in Internet Explorer.
   
  If above is not enough, the problem is related to Windows Live and will be much better suited in the Windows Live Forum. Click on the link below.

  Windows Live Solution Center
  http://www.windowslivehelp.com/product.aspx?ProductID=1

• Why does my monitor Samsung SyncMaster B2330 start flashing after a few seconds after that, I was on the computer?

  Why does my monitor Samsung SyncMaster B2330 start flashing after a few seconds after that, I was on the computer?

  Hello

  What operating system do you use?

  Method 1:

  I suggest you check in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2:

  Troubleshoot monitor and video card

  http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  I suggest you to contact Samsung support center and check out.

  http://www.Samsung.com/AE/support/main/supportMain.do

  http://www.samsung.com/ae/support/search/supportSearchModelResult.do?menu=SP00&searchWord=SamsungSyncMasterB2330monitor&default_searchInputBox_value=Enter+model+number+or+keywords&searchInputBox=+Samsung+SyncMaster+B2330+monitor+

• Clip lights up after a few seconds

  Hello everyone.

  I put a song or FM and after a few seconds, my clip turned off its lights. He continued to play music, but it's very strange because I don't remember the front lights. If I press the buttons back on the lights and the screen, but if I left it intact he turns off the lights and the screen. Is this a normal behavior?

  I think that my firmware is v01.01.18A

  Thank you

  There is a display setting that you can set to tell how long you want the display to stay between the keys.  The impedus for a shorter time display is that the OLED screen has a shorter than a LCD screen life and of course he uses more battery.  So more the longest time display, you can listen to your music and video between charges.  If you want to see where things are just press the Center button.

• * Media Player stops. My drive stops, then recovers itself after a few seconds. Screen goes black for 1-3 seconds, BUT Audio continues!

  I have Vista Ultimate, but I'm not very smart PC!   When I try to watch a video clip, etc., SEE above EDIT.  My drive stops, then recovers itself after a few seconds.  Screen goes black for 1-3 seconds, BUT Audio continues!  Then Visual back for a while until that the same thing never happens again anywhere!  Also the FAN spins-up like a jet plane taking off!   Help, please.  Thank you.

  Hi Peter,.

  1 have had any changes made on the computer before the show?

  2. which media player you use to play the video?

  3. the problem occurs on all the video clips?

  I would say as update you the video card drivers and check if the problem persists:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem is not resolved, please respond with more information to help you best.

  Thank you.

• Sound stops after a few seconds on you tube

  Please can someone answer me

  I'm trying to HERE music of YouTube when the video star from the beginning I have here the voice after a few second of my headphones aren't here more. That will be a problem.

  Thank you.

  original title: when I used to music HERE my headset does not work, thanks in advance

  Hi ArtanLala,

  1. This only happens when you play youtube videos or videos stored in the system as well?

  2 - is playing the video without sound or images also stops?

  3. what browser do you use?

  4. what type of Internet connection do you use?

  5. are you able to get a sound from speakers?

• HP-15r205Tu: laptop does not completely start after a few seconds, there is white screen

  My new laptop after 1 month all of a sudden when I start it up it crashes after a few seconds and screen looks white black n empty... no keys of the keyboard have been Woking and... power button it freezes also as hell... den I remove the battery and den only judgments... what happens to my new pc

  Hey @priya_17,

  A system restore would return the laptop to an earlier time when things worked ok. An update can sometimes what you see. A hiccup in the system so to speak.

  So, if restore you it, it will cancel the hiccups.

  I hope this helps.

  Thank you.

• Remote Desktop connects then stops after a few seconds

  I have two laptops to Windows 7.  We run OpenVPN which I will refer to the VPN server.  The other is the Client and with me on trips.  Open VPN is configured on the Client and the VPN server, and I can connect from inside and outside the network without any problems.  I also have an Open VPN Client with another port configured on a server QNAS.  I can connect without any problems.

  I want to run the OpenVPN server on one VLAN separated to prevent users to see my internal network and only sees another NAS.  I also use the VPN to offer our few users (3) the ability to connect and use my static IP address.

  I have a router TP-Link-ER-6120.  I can configure the three ports to run in 3 separate VLANS.  When I configure the VPN server works on my regular network to exploit the VLAN1 and VLAN2, I can always connect to OpenVPN and all I want to do works (NAS and Internet access with my static IP).  However, when I try to establish a Session to the VPN server computer remote desktop, I get the login and enter my user name and password.  I see the remote desktop window, open and usually see the remote desktop wallpaper and loading the desktop icons.  Then it crashes.  If he does until I can see the desktop, it automatically attempts to reconnect.  If she makes it that far, it stops with a window that says Remote Desktop connection has been disconnected.

  If I come back in the configuration of the router and change the configuration of VLAN for the server VPN is on the same virtual network, I can connect and the remote desktop connection is successful, as long as the customer is located on my network.  If I connect the Client to the VPN server from outside my network in this configuration, the remote desktop will always fail in the same manner described above.  I also have a QNAS on my network with OpenVPN configured and operational.  If I connect the Client computer to the QNAS, I can connect to the VPN server until the VPN server is placed in its own VIRTUAL LAN.

  Thus, work Desktop connections to local computers.

  However, since a remote off-grid remote office connections begin to work, but are stopped when connecting.

  -J' I ping the VPN server during connection attempts and never lose the connection.

  -J' used telnet to Server VPN 3389 port and it connects.

  -J' turned off the firewalls on both sides and went up to remove Symantec on the VPN and BitDefender server on the side side Client to use Windows Firewall on both.  And then disabled Windows Firewall as well and still no joy.

  Is there a setting in Windows I'm missing that allow the desktop connection remote on the LAN, but not enable during login remotely even if I can ping, telnet and usually access the rest of the network?

  Is it maybe a configuration problem on the side of the router?  Installation side route is a very simple graphic interface.  I configured for the VPN service roads and they remain in place (one for the QNAS) and one for the OpenVPN server.  I set up a static route (virtual server) for port 3389 go directly to the IP address of the VPN server, but that did nothing.

  Miss me probably something simple, but it launched my ass for weeks now.

  Any ideas?

  Hello Michael,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  By the description, I understand that the problem with remote desktop connects and then stops after a few seconds on the system.

  Certainly, I understand your concern and will try my best to help you.

  To get more information about it, we have a dedicated forum where these issues are dealt with and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• ISA 550W: Youtube streaming stops after a few seconds

  Since I installed the ISA 550W, Youtube videos stop after a few seconds. It happens on all my devices: Windows 8, Samsung Smart TV, Android, Windows Phone...

  I have the lates firmware.

  This problem doesn't happen with the other streaming like DailyMotion site.

  I disabled HTTP antivirus but it changed nothing. Web browsing is faster.

  Application control is not enabled.

  Any idea? Thanks in advance.

  Have you tried turning off all other security settings (i.e. an IP)?

  Have you tried to return to the previous firmware to see if the problem persists?

  Shawn Eftink
  CCNA/CCDA

  Please note all useful messages and mark the correct answers to help others looking for solutions in the community.