SBH52 crashes with the NFC on the screen icon

Similar Questions

• Failed to upgrade 10 Windows v3-772 - initialize not just crashes with the acer logo screen

  Hi guys

  I just had my computer repair and the SSD has been changed. I was running 10 before windows and everything was perfect until an update in ruins everything. Long history does not in this

  In any case I unstall all my software and do an update to windows 10. All the preparations and thus seems to be okay. Then it restarts and is stuck. Never of shots. I see the low activity of the HARD drive, but I let it run for 8 hours and still nothing, always gangs in the acer start window. It's once the bios loaded, because I can access that I'm fast and press f2.

  After a while, I gave up and thought maybe it was just a fluke, so I used my recovery dvd and reinstalled my system and the Agency and the outlook and... After the installation of about 5 hours, my system was ready to go. So I decided lets try again. And once again same failure. Just crashes with the Logo of Acer.

  I called Microsoft and they told to do me a startup repair. However it is not possible, I can get it in the repair mode, but none of the functions to work. Then they said that it was a material thing, but everywhere I look States the v3-772 should have no problem with the windows 10.

  I'm normally pretty good to fix my own problems, but in order to fix a problem I need a mistake or error code or something to go for. Does anyone have an idea what to do?

  ncmohr,

  I'm not completely sure what is the problem, but I'll tell you this.  When I look at Windows 10 drivers of Acer and BIOS for your computer model and see that there are some drivers Windows 8 and an old BIOS, it's really bad... especially if you try to get Windows 10 anniversary of working on your computer.

  I don't have the model of your computer, but I'll give you a bunch of links that may or may not help you get a version of Windows 10 installed on your computer.

  http://community.Acer.com/T5/V-and-VN-series-laptops/Acer-Aspire-v3-772-Windows-8-1-clean-install/TD...

  http://community.Acer.com/T5/Windows-10/Acer-Aspire-ES1-111M-cannot-install-Windows-10/m-p/460183#M4...

  https://www.heidoc.NET/Joomla/technology-science/Microsoft/67-Microsoft-Windows-and-Office-ISO-downl...

  https://Rufus.AKEO.IE/

  http://www.Acer.com/AC/en/us/content/Windows10-update

  http://www.Acer.com/AC/en/us/content/drivers

  ---------------------------------------------------------------------------------------------------------------------------------

  If you try to do a upgrade "on-site" Windows 8 for Windows 10 anniversary, then the link below and picture below might help... but I doubt it.

  https://www.Microsoft.com/en-us/software-download/Windows10

  

  Edit: I don't know if you should be using the drivers on the Acer website to download or just use the updated drivers that Windows automatically gives you.  Or a combination of both.  Try to start with the drivers Microsoft gives you automatically.  It could take hours for you to understand... Unfortunately.

  Edit2: On the Acer Web site, they gave you windows driver chipset 8.1 and Intel Management Engine Interface driver. And I suspect that the reason that they did is because they don't have to update your BIOS.

• Satellite Pro L20-someone ' one can tell me if I have a problem with the screen?

  Hello

  I have a Pro L20 - PSL25E and I recently had problems with the screen, it was intermittently flickering/lose color and whiting almost (when the color fades white vertical lines begin to appear).
  This seemed to worsen after that I dropped it (only from about 2 feet off the ground, not a big drop).

  I thought that the sceen can go, but the performance of the laptop seems to be affected when this happens, the laptop started to run very slow (tracks mouse slowly, programs I clicked take ages to run and it freezes sometimes to stop flashing) that had me thinking that it might be a virus or performance problem.

  My screen, drivers are updated, I did a full scan with McAfee, ran a clear-up system and a Defrag.

  I was wondering if anyone knew if it seemed to be a problem with the connections of the screen and would need replacement or if it could be repaired or if it were a performance problem?

  Any help would be great thank you appreciate!
  Rebecca.

  Looks like the graphics chip has a problem, which I think is a motherboard replacement.

  You can get a quote for repair to an authorized service provider. There is a list of ASP on the Toshiba site.

• Portege M200 - pen does not work with the screen

  So I bought a pen for M200 and reinstalled the operating system.
  Now I M200 with Windows XP Tablet PC edition, a utility Screen Rotation and usefulness of the stylus button. Now Pen buttons work fine with my new pen, but the screen itself does not work. I mean, the stylus does not work with the screen.

  I have a mouse, and another menu pointing devices in Device Manager and it includes the following submenus:

  HID compatible mouse (I use the random DELL mouse)
  Mouse PS/2 Cimpatible (?)
  --------

  I think there must be something else...
  Please tell me, forum, what drivers should I download to get the pen to work?

  Stand by. Are you using the original image of recovery Toshiba (operating system) or you have installed your version?

• my photo does not work with the screen saver

  Photos has never worked on Apple TV 4 until today with the 032116 update, but my pictures does not work with the screen saver.

  I dare you to try to tell me how to make it work. Please have a solution, someone.

  Given that Apple isn't really care or help on these forums, it would be great if someone mentioned the steps.

  Thank you

  Can you elaborate on the question?

  These are user forums and this is why you will not see the participation of Apple here

• Problem with the screen on IPAD curtain

  Hello

  I'm a bad psychic, and I have a problem with the screen curtain.

  A longitudinal of Voice Over, the screen curtain is automatically activate.

  Normally to turn it off, you must type three times with three fingers. Only on my IPAD when I type three times with three fingers is "saying that turns off or preach. Find it me impossible to disable the screen curtain when voiceover is active.

  The latest version of IOS 9.2.1 is installed.

  I reset the Ipad and nothing changes.

  Can someone help me?

  Thank you

  Is is possible that the zoom is also on your iPad? If this is the case, try to use a quadruple 3 finger tap to turn off screen curtain.

  If the zoom is not active, try:

  1. Possessing the sleep/wake and home button until the Apple logo appears or 15-20 seconds.
  2. If, you can't remove the curtain of the screen, I would advise you reset the settings of the iPad. Settings > general > reset > reset all settings. It will be his turn VoiceOver off, but then you can use iTunes to turn on VoiceOver. Voice-over should return without the curtain of the screen automatically active. IOS - Apple Support using accessibility features

  The of is it possible that zoom is also active your iPad? In this case, you must use a valve 3 quadruple finger pour disable the screen curtain.

  try if the zoom is not enabled:
  1. While holding the button market / sleep and home to ' to the Apple logo, or 15-20 seconds.
  2. If you still can't delete the screen curtain, I recommend to RESET the settings on the iPad. Settings > General > RESET > RESET all settings. This turns off VoiceOver, but you can then use iTunes to turn on VoiceOver. Back to turn voiceOver should without the curtain automatically active screen. Use IOS - Apple support accessibility features

  -AJ

• Satellite A100-225 keeps freezing and crashing with the new HARD drive

  Hi all

  I have a Satellite A100-225 with a 100 GB SATA Hitachi drive I int it that recently started showing bad sectors. Then I bought a Hitachi 320 GB SATA II drive to replace it. I tried the drive and it was recognized right away, so I didn't need to change the SATA speed. I ran the restore a disk installed newest. The problem I have is that the computer keeps freezing and crashing with the new drive. It takes a lot of time to load up when turned on and there is a noticeable to untermittant delay when you drag the cards around solo.

  I tried to run the Hitachi drive test and it comes back fine. I also tried to turn the SATA speed of the drive down from 300 to 150 via the firmware, and although I saw a slight improvement, it is still not right.

  I talked to Hitachi and they say that he could not be 100% compatible, so the problems. Someone at - it else sucessfully set up a replacement for this notebook drive and if so what make and model. Has anyone else had simular problems?

  Thank you

  Years ago, I've updated yet more former Satellite M70 with SATA HDD (270 GB if I m remembering well) and everything was fine.
  In my view upgrade with SATA HDD normal shouldn't be a problem. Do not SATA II because it will not work faster.

  I can't say for sure, but there must be a compatibility problem.

  Let's see if someone else had better luck with the upgrade of the disk on the Satellite A100.

  Have you checked this forum with advanced search option? Maybe you can find some old NET on upgrade the HDD on A100.

• my PC crashes with the error"SPCMDCON. "SYS at ADDRESS FBFE7617 base at FBFE5000 date: 3dbdd" any suggestions? that solve my problem

  Now PC crashes with the error"SPCMDCON. "SYS at ADDRESS FBFE7617 base at FBFE5000 date: 3dbdd" any suggestions? How to protect my pc and solve my problem and frequntly turn off my pc what I would do now?

  Hello

  When exactly do you get this error message?

  Perform a clean boot to verify if a third asks the origin of the problem.

  Refer to this article for help:
  http://support.Microsoft.com/kb/310353

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm having a problem with the screen resolution cannot be superior to 800 x 600 pixels

  All this began after I plug an i9 phone to my pc to load

  later, to this day, when I turned on my pc screen resolution would not stay how I put it

  He wants to just go to 800 x 600 pixels.

  I ran microsoft security scan it found and deleted a virus java exploit cve 2010-4452

  but still having trouble with the screen resolution

  If the problem occurred after you plugged into your phone. I suggest to perform a restore of the system automatically, put it on a date 2 days before you had the problem. If this isn't the case, you can check the video card driver:

  Start > run > devmgmt.msc
  Check your video card driver or see if there are any missing drivers
  If its lack, then update or install the driver of your video card.
  I hope this helps you! Good luck.

• Go off & on several times before the monitor turns on. Comp seems to start OK but the problem is with the screen.

  Original title: XP start help please...

  ... are to be turned off & on several times before monitor lights. Comp seems to start OK but the problem is with the screen. Do I have to make a boot disk & if so - HOW?

  Hello

  ·         What is the brand and model of the computer?

  ·         You get the error message?

  ·         Did you check the connection of the cable to the monitor?

  ·         Have you tried to update to the latest graphics card and motherboard chipset drivers?

  First, try to connect your monitor to a well known PC, maybe the old laptop that you use now. If the monitor works, the problem is with the video card in your PC. If the monitor does not light, the monitor. It is usually cheaper to buy a new monitor that in order to be an old repaired, unless the monitor is still under warranty.

  Try connecting a monitor well known to your PC. If the monitor works, your old monitor is fried and needs to be replaced.

  If your monitor works when connected to another PC, the problem could be your video card. First, and then you turn on your PC, the power and cooling case fans run they. If they do not, it could be the power supply.

  Then, open the computer case. Before you do anything inside, unplug the power supply.

  IMPORTANT! Touch any metal part of the computer case to connect to the PC. A single static spark can destroy computer circuits.

  If the video card is the type of card that plugs into a slot on the motherboard, remove the screws or attached at the top of the card, remove the card, to manipulate the card by the edges to avoid disturbing the circuits on the card, carefully and re - install the card. Sometimes simply reinstalling the card corrects the problem.

  If this does not work, replace the video card with a card of similar type. Perhaps now is the right time for an update of video card.

  If the video card is integrated into the motherboard, you can install a new card in one of the PCI slots on the motherboard. When the PC starts for the first time, go into the bios and disable the onboard video.

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

• Computer starts up, it stops at a black screen with the mouse icon (which moves around as usual)

  When I start my laptop, it goes through all the loading screens (Windows Vista etc.) then sticks to a black screen with the mouse icon... I somehow managed to try a restore of the system by a few points, but they all failed a moment I can't even find this option.

  Hi Peter,

  1. have you done any recent hardware or software changes to the computer before the show?

  2. with what code error did system restore fail?

  Method 1:

  Try to start the computer in safe mode and check if the problem persists,

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  Try and perform a startup repair and check if that helps you.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

• Netflix on media center crashes with the message 'checking activation of the device.

  Netflix on media center

  Netflix on media center crashes with the message 'checking activation of the device?

  Hello

  Try to disable the security software temporarily to see if that makes a difference.

  Note: Make sure to enable the antivirus on IT to make sure that your computer is protected

  For more information, you can also publish your quries Netflix community forums: http://community.netflix.com/forum or the Greenbutton

  Diana
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• A/c and the battery in the middle of the screen icons

  On my netbook with XP... when I'm on the work of a/c and the battery recharges two boxes appear in the middle of the screen with the battery icon and the other with the a/c son of icon. I cannot get rid of them or move them.  They sit just there alternately light upward and quickly jump.  Even if I worked this way on this netbook since almost a year that just started to happen and I have no idea where it comes from or how to get rid of.  Any ideas?

  Hello

  I suggest you try deactivating and activating the icons and check.
  Here are the steps:
  1.right - click on the taskbar, and then select Properties.
  2. in the Notification area, make sure that Hide inactive icons is selected, and then click Customize.
  3. Select the item you want to configure and select the behavior setting that you want in the behavior list.
  4. click on OK.
  Also check out this link:
  http://support.Microsoft.com/kb/279771

• Problem with the desktop icons

  I have the problem with the desktop icons... they come from both sides... one above the task bar and on the other hand under the task bar too... I'm unable to remove those who are below the taskbar.

  Hello

  You can try following the steps provided below and check if this can help, make sure that closing all open programs:

  (a) the Task Manager open by right-clicking on the taskbar

  (b) in the process tab, right-click on "explorer.exe" and complete the process

  (c) screen will be blank, except for the Task Manager.

  (d) open the file - new task (run)

  (e) enter "explorer.exe" click OK.

  If the problem persists, try to create a new user account and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  See also: http://windows.microsoft.com/en-us/windows-vista/fix-a-corrupted-user-profile

  Hope this helps,

• There is a red phone at the top of the screen icon where notifications dot is usually.  What does that mean?

  There is a red phone at the top of the screen icon where notifications dot is usually.  What does that mean?

  This means that your watch is disconnected the phone, perhaps because it is out of reach.