SBH52 detection problem

Similar Questions

• I have install AdobeProDC yesterday and now I can't convert my email in pdf format.  I have the following message: Acrobat PDFMaker has detected problems in the installation.  Please repair/reinstall Acrobat.   How can I fix this?

  I installed Adobe Pro DC yesterday and now I can't convert my email in pdf format.

  I have the following message: Acrobat PDFMaker has detected problems in the installation.  Please repair/reinstall Acrobat.   How can I fix this?

  Try to remove Acrobat DC with the tool from here: Download Adobe Reader and Acrobat cleaning - Adobe Labs tool , restart the computer and reinstall Acrobat Pro DC.

• G8D29PA #ACJ: detected problem

  My almost complete recovery poster drive.
  A pop notification message always flash on my screen to clean the disc or making space.
  I already have
  #clean the player.
  # Remove temporary files
  # defregment the drive, but it does not work in the recovery disc.
  #i have clean the entire system
  # and also for the format
  
  But still detect the same problem, do not know what do :-(
  Help me ASAP
  Thanking you
  Syed dido

  This article talks about the HP recovery partition. If you get the message to different partition low disk space, you can try to disable the message or to provide additional information.

  HP PC - error: not enough disk space. You run lack of disk space on recovery (Windows 8)

  http://support.HP.com/us-en/document/c03737312

  If you want to disable the low disk space message in Windows

  http://www.thewindowsclub.com/FAQ-low-disk-space-notification-or-warning-in-Windows-7-How-to-disable-etc

• Modules in the PXI-1033 chassis detection problem

  Hello

  I met difficulties in operating my PXI-1033, which installed two strips of XIA Pixie-4. Until recently the system was working properly, but now I am unable to detect and use modules using software of XIA, although according to Windows both modules are "working properly". Nothing has changed between the time it was working and now (that I know)!

  I suspect the problem involves the chassis, since when I place a module in slot 6, the chassis will not be powered. It will power-up with any other occupied housing.

  Any help would be appreciated.

  See you soon.

  Hello jnod,

  At these modules never appear in measurement and Automation Explorer (MAX), if so they appear actually now?

  Also if you have other material, I'd be interested to know if the PXI chassis will start when you have a module IN slot 6.

  The chassis won't start when either module Pixie-4 is in slot 6?

  You probably already know, but turn you on the chassis PXI before you have activated on your computer?

• Revo RL70 Media Center Tuner card detection problem

  Brand new RL70, Win7, AVerMedia A373 minicards Dual DVB - T seems to be installed correctly, indicated in the device with the latest drivers Manager. When you configure the TV Signal in Media Center, no signal TV or channels are. Manual setting indicates tuners exist, but no TV signal. Detecting TV signals takes more than an hour, as channel scan.

  Am using the existing TV equipment (antenna, cable, etc.) which is proven to work.  Any ideas?

  As I was at a loss, and a solution was not forthcoming, in desperation a tried upgrading to Windows 8.  Success!

  I assume that the installation of Windows 8 and Windows Media Center has replaced an original image from Windows "corrupt."

  So not really a solution, but problem solved.  Only problem is now the remote does not work with widows 8!  I see another thread on this point, so a common problem.

• Bi-ecrans complicated detection problem

  Read everything before you answer.

  There are two situations for this problem.

  In the first, I start windows with one and two monitor connected and connect. In this case, watch one and two times the same screen, using the smallest screen resolution of the secondary monitor. (1280 x 1024 to 1920 x 1080)
  Display options Windows devices section detects only a monitor, and the screen icon is not shared. There is no option to change "Duplicate" to "Extend" in display options. By clicking on "Detect" does nothing, and clicking on "identify" shows the two monitors as '1 '.

  In the second, I connect two monitor after I connect to windows, and it goes unnoticed.  This is his normal resolution screen. By clicking on "detect" in the display options has no effect. When connected, two monitor lights to detect the connection, but goes directly to the standby mode.
  Monitor using VGA, while the two monitor uses an adapter to connect the DVI - D single link to HDMI. The monitor is a double link, and so is the port on the computer, but this configuration has worked before and is currently working on a computer to "clone". (Same characteristics, until the time of purchase)
  This problem occurred after my hard drive was put out and RAM has been improved, but again, this configuration works correctly on the clone computer. (Which has been also updated)
  Using monitor three (which is not Acer, as monitor of one and two, but it has the same specifications as the two monitor outside the size of the screen) works very well and using analyze two (and in the same place of wire/adapter/port) on the clone computer works perfectly well so.
  Both computers are clean resets due to hard drive, and have the same programs installed. The problem occurs only on this computer. All ports are intact, just like the son. I have no idea what is wrong, and any help would be appreciated. Thanks in advance.

  Hello Kierra,

  Thanks for posting your query on the Microsoft Community.

  We regret the inconvenience caused to you. We will be happy to help you with your problem.

  This issue would have occurred as a result of obsolete or damaged or incompatible graphics card drivers.

  We will try to update the graphics drivers and check if it helps:

  Step 1: Update the drivers from Device Manager.

  1. in the search bar type Device Manager.

  2. open Device Manager and expand graphics card.

  3. right click on the device and select update drivers.

  Step 2: Refer to the steps in the below article to update drivers for graphics cards and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Let us know the status of the issue. We will be happy to help you further.

  Thank you.

• Re-detection problem on a 9700 coverage status

  My apologies if this has been requested and replied, but did someone aware of the problem of re-detection coverage with an OS 5.0 on a 9700 after deactivation and reactivation of the radio?  One of my test users has reported that, after re-rockers radio after testing features offline from the application of the app continues to tell them that they have no insurance.

  The user has waited for hours to be sure it wasn't a shift and can still use the browser and Messaging.  The soft reboot doesn't fix not, but a hard restart it resets so that the same work functions.  It is reproducible every time that the user deactivates and reactivates the radio.  They don't use wifi and aren't connected USB.  The BES has increased during this period and I was on it without problem both with the same code.

  The code works fine on my 4.6 8900.  I turn off then turn it back on and a few seconds, he is able to detect coverage and allows me to do what I want.

  The app is an internal business application using BES/MDS and Sun WTK generate heels although I do not think it is relevant because it is a failure on the controls of pre I do for coverage and does not receive the actual web service calls.  I perform a check whenever I want to access the web service is not old data lying around.  Basically, it works perfectly for me but not for my user in the exact same circumstances.

  if ((RadioInfo.getState() != RadioInfo.STATE_OFF && (RadioInfo.getNetworkService() & RadioInfo.NETWORK_SERVICE_DATA ) != 0) && CoverageInfo.isCoverageSufficient(CoverageInfo.COVERAGE_MDS)) {
      return true;
  }else{
      return false;
  }
  

  The code is based on code found in the article ' how to-determine when to route the data.

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/How_To _...

  Thank you

  Tim

  I think I found the problem for me, although yours was obviously different Adama.  Mine was I guess as a result of negligence on my part (the shame of it!) that because I couldn't reproduce the problem I can't swear to that.

  I had a vague sense that my problem could be linked to the pesky network threads hang and delay at inopportune moments.  Peut-related I also noticed that when receiving recently pushes then deactivation and reactivation of the network that had always significantly more time to get connectivity in the backup application.  Also I had no problem but my other user as described above fact.  I was a little sloppy while taking care of network controller object references, but when I changed to the model that the application is still running and will just in the background, it came back to bite me, for obvious reasons.  Once I went back through and ensured I remove reminders and removing the objects etc the problem about the user not having no network not detected during the reactivation of their radio all went.

• My games freeze and I have to refresh the page, windows network detects problems with pakage 1.0

  Windows network diagnostics detects connectivity with windows version 1.0 package! IAM helpless! My games freeze and I have to keep refreshing page and its helppppppp frustrating!

  Hello

  Thanks for asking!

  1. what game are you talking about?

  2. are - what you're talking to online games?

  3 have there been recent changes to the system before the show?

  If you are referring to online games, I suggest to follow the link and follow the steps. Check if it helps.

  The problems of games online using Internet Explorer

  http://support.Microsoft.com/kb/2528246

  Reply back with the results. I'd be happy to help you.

• Microsoft Keyboard 600 detection problem

  I bought a "Microsoft Wired Keyboard 600' for a few days. It works fine until last night.
  But after that it suddenly stop responding (this time, the Manager of devices and Microsoft the Center m & k show).
  Num Lock led turns off automatically. Also mouse had then some problems. After removing the keyboard usb mouse worked well.
  Then I try this morning. This time keyboard not detected by the pc and the three led's (num.cps, scrlock) start flashing regularly. I try in another pc
  but I had the same problem.
  Any solution?

  If the keyboard fails on another computer too so maybe it's just a case of a defective keyboard?

  See if reinstall the drivers and the software help.

  Drivers, software and documentation of your product
  http://www.Microsoft.com/hardware/en-AU/d/wired-keyboard-600

• Collision detection problem

  Hey guys,.

  I practice so the creation of a platform game. I have a movement system works, but when you try to add collision with platforms I have a problem.

  I did add each platform in a table and then check for the collision between the player and each platform, since I have just a bunch of instances without the platform symbol name on my stage. The problem with this is that my jumping code, I use a Boolean "onGround" value, which determines whether or not the player is "on the ground". And since my loop "foreach" across ALL platforms, even if the player is on a platform of some, there are other, it won't, and if it returns the onGround Boolean false.

  It's a problem with my code of jumping in general, I wonder where I get out of here. If I need to change my code from jumping, or change the collision, or what. Any ideas would be great. Here is my code:

  package  
  {
      import flash.display.MovieClip;
      import flash.events.Event;
      import flash.events.KeyboardEvent;
      import flash.display.DisplayObject;
  
      public class Main extends MovieClip
      {
  
          var arrowUp:Boolean = false;
          var arrowDown:Boolean = false;
          var arrowLeft:Boolean = false;
          var arrowRight:Boolean = false;
  
          var arrowUpReleased:Boolean = true;
          var arrowDownReleased:Boolean = true;
          var arrowLeftReleased:Boolean = true;
          var arrowRightReleased:Boolean = true;
  
          var onGround:Boolean = undefined;
          var isJumping:Boolean = undefined;
  
          var vx:Number = 0;
          var vy:Number = 0;
          var acceleration:Number = 1;
          var gravity:Number = 0.3;
          var jumpForce:Number = 7;
  
          var speedLimit:uint = 6;
  
          var platformArray:Array = new Array();
          var platformNumber:uint = 0;
  
          var thePlatform:MovieClip;
  
          public function Main() 
          {
              stage.addEventListener(KeyboardEvent.KEY_DOWN, keyPressed);
              stage.addEventListener(KeyboardEvent.KEY_UP, keyReleased);
              stage.addEventListener(Event.ENTER_FRAME, update);
  
              for (var i:uint = 0; i < numChildren; i++)
                   {
                       if(getChildAt(i) is Platform)
                       {
                           platformArray.push(getChildAt(i));
                       }
                   }
              for each (var platform:DisplayObject in platformArray)
              {
                  if (platform.hitTestPoint(player.x, player.y + 20, true))
                      {
                          vy = 0;
                          onGround = true;
                      }
              }
          }
  
          function keyPressed(event:KeyboardEvent):void
          {
              if (event.keyCode == 37)
              {
                  arrowLeft = true;
                  arrowLeftReleased = false;
              }
              if (event.keyCode == 38)
              {
                  arrowUp = true;
                  arrowUpReleased = false;
                  isJumping = true;
              }
              if (event.keyCode == 39)
              {
                  arrowRight = true;
                  arrowRightReleased = false;
              }
              if (event.keyCode == 40)
              {
                  arrowDown = true;
                  arrowDownReleased = false;
              }
  
          }
  
          function keyReleased(event:KeyboardEvent):void
          {
              if (event.keyCode == 37)
              {
                  arrowLeft = false;
                  arrowLeftReleased = true;
              }
              if (event.keyCode == 38)
              {
                  arrowUp = false;
                  arrowUpReleased = true;
                  isJumping = false;
              }
              if (event.keyCode == 39)
              {
                  arrowRight = false;
                  arrowRightReleased = true;
              }
              if (event.keyCode == 40)
              {
                  arrowDown = false;
                  arrowDownReleased = true;
              }
  
          }
  
          function update (event:Event):void
          {
  
              //ACCELERATION
              if (arrowLeft)
              {
                  if (vx > 0)
                  {
                      vx = 0;
                  }
                  if ((Math.abs(vx)) < speedLimit)
                  {
                      vx -= acceleration/2;
                      player.x += vx;
                  }
                  else
                  {
                      player.x += vx;
                  }
              }
              if (arrowRight)
              {
                  if (vx < 0)
                  {
                      vx = 0;
                  }
                  if (vx < speedLimit)
                  {
                      vx += acceleration/2;
                      player.x += vx;
                  }
                  else
                  {
                      player.x += vx;
                  }
              }
              if (arrowUp && onGround)
              {
                  vy = -jumpForce;
              }
  
              //DECELERATION
              if (arrowLeftReleased)
              {
                  if (vx < 0)
                  {
                      vx += acceleration;
                      player.x += vx;
                  }
              }
              if (arrowRightReleased)
              {
                  if (vx > 0)
                  {
                      vx -= acceleration;
                      player.x += vx;
                  }
              }
  
  
              //GRAVITY
  
              player.y += vy;
  
              if (!onGround)
              {
                  vy += gravity;
              }
              if (onGround && !isJumping)
              {
                  vy = 0;
              }
              if (vy > 0)
              {
                  onGround = false;
              }
              else
              {
                  onGround = true;
              }
  
              //COLLISION
  
              for each (var platform:MovieClip in platformArray)
              {
                  if (platform.hitTestPoint(player.x, player.y + 20, true))
                  {
                      vy = 0;
                      onGround = true;
                  }
                  else
                  {
                      onGround = false;
                  }
              }
  
              trace (onGround);
          }
  
      }
  
  }
  

  Thank you

  PS what is happening right now with that code is that the player hit the platform and stops, but onGround rest false

  Probably, there is too much code for anyone to really go. However, from what you said on your loop for:

  for each {(var plate-forme: DisplayObject dans platformArray)}

  If (platform.hitTestPoint (player.x, player.y + 20, true)) {}

  Vy = 0;

  onGround = true;

  }

  }

  I think what you want is to put a break; in there right after onGround = true; -C' is to say stop the treatment when you find a ground plan.

  Also, there are a couple of collision of good systems out there that might make this a little easier and more robust. Take a look at the Kit of detection of Collision (CDK):

  https://code.Google.com/p/collisiondetectionkit/

• The Flash Version detection problem

  Hi guys,.
  I tried to use the flash for flash 8 detection kit. When I saw my web page in firefox, it works perfectly. However, when I run it in IE, it turns out that in the contrary case. The dialog box flash which is supposed to appear (to invite the user to flash drive down) is not in IE. Only the alternative message. Then after I clicked on the link (which was directed to the flash player download page) and installed the latest version of the flash player, the file still does not work. I was invited with still the same message to download the flash player again. I tried to restart my pc but the problem persists. Someone had this problem b4 and happens to know how to solve? Thanks in advance.
  
  (PS: I have attached the source just in case if anyone of you need to see it again)
  
  Silvertype

  I met similar symptoms and learned that signs settings in Internet Explorer can block detection scripts - restrictions Active-X and JS can cause thinking flash detection script there is no plugin available when it is available. Although I have not tested specifically to identify what settings to create problems.

  Recently, I found an article on this site that deals with this and provides another technique that I intend to incoprorate.
  http://blog.deconcept.com/SWFObject/#expressInstall

  I'm not a programmer, so I can be a bit dazzled by the brilliance (or perplexed...), but this article seems quite convincing.

• Satellite A60 - BACK memory checker detected problem

  Hello

  I have a problem using the recovery DVD, as posted above. Microsoft site Web told me I maybe lack of hardware (Ram) the error I get is unable to load the required DLLS for kernel.

  I ran the auditor of memory microsoft back and all the time, the results are expected: ffffff real: 7fffff

  I bought a new ram and installed the ram installed ok, but I still have the same problem.

  Now, I've read that this model has 256 MB of internal ram, which is hard.

  I think it should be this hard ram that has become corrupted somehow.
  Is that what this really hard hard ram?
  I can't locate it on the motherboard.

  This means, if the ram is corrupt and hard that I have to buy a new motherboard?

  Any help and advice would be welcomed - especially all that means I don't have to buy a new motherboard!

  Also, if anyone knows the model number of the motherboard, I would appreciate this too.

  Thank you in advance,

  Paul.

  [Edited by: admin February 11 06 08:28]

  Hi Paul

  According to the manuals of the unit the internal memory is not expandable and as far as I know not removable. I m not 100% sure if this module is defective.
  In my opinion, you should contact Toshiba. He can do a diagnostic test and it can give you a good answer on the blackout. Maybe you do not need to replace the motherboard.

  Good luck

• Satellite L775D S7332 no battery detected problem

  * Hi there *.

  I would like to ask my help address the issue of how that detect the battery of the laptop. 20 days for newly purchased laptop 2 days ago and came up with this error is that it does not recognize the battery. and if not it would put us in the usual place.

  Hello

  Keep the AC adapter plugged into the laptop for a longer period of time.
  In some cases, the battery supports a mode of initial charge.
  In this case, the battery starts to charge after a certain time.

  But in the worst case if the battery would not always be detected, try to report it to a Toshiba service partner in your country. It might be possible that your battery is defective.

• Printer detects problems

  I have an officejet pro 8500 a Win7 running. The printer will lose the connection with the computer. In this case, the power light will fade back. I can unplug the power to the printer, plug it in again and the printer will reconnect with the computer and prints fine - but it is only a temporary solution and won't last long, then light fades back and forth again. Have no idea how to solve this problem - I deleted the drivers, drivers reinstalled without success.

  The printer goes into mode 'sleep'.  Normal.  Read your manual on how to disable this if you want, and how to set
  Will auto power off to turn off.

  Please provide the following information if anyone can help including:

  The printer model - done

  Detailed problem description-

  Operating system on the computer (including the revision of the service pack)-

  Method - USB, LAN, Wireless cable connection? -

  Brand and model of router and modem? -

  Error messages - on the screen of the printer or computer, no matter what flashing light patterns.

  If wireless, status of the blue wireless light on the printer, active, disabled or flashing? -

• Easy transfer cable detection problem

  While trying to transfer files etc. from old computer using Windows XP Professional version 2002 service pack 3 for new computer using Windows 7, I get a message on the old computer indicating "Cable Easy Transfer undetected." The cable is fine because it works with another computer.

  FOR ANYONE WHO IS STILL HAVING THIS PROBLEM I THOUGHT IT!

  Shouldn't the Systemengineer Microsoft had to know this?

  Here's what worked for me.

  1. on your XP machine, check if you have Windows XP 32 bit (x 86) that you use/download version 32-bit (x 86) Windows Easy Transfer.

  2 install.

  3. you must now do a right-click 'my computer' and select 'Properties'. Go to the "hardware" tab and click on "Device Manager".

  3. now that you're 'Device Manager' connect your easy transfer cable.

  4. it should refresh and you should now see 'cable devices transfer' (mine had a question mark logo, which indicates that the driver was not installed...) Click the small 'sign' next to him and less must be something called 'Simple cable USB transfer' (this is what it says for my Dynex brand cable anyway...)

  5. right click and select "Properties". Go to the tab "driver", then click on "Update Driver".

  6. the "Welcome to the Hardware Update Wizard" should appear. Select "install from a list or specific location (Advanced)" and click "Next".

  7. Select "Search for the best driver in these locations" and also select "include this location in the search:

  8. now click on 'Browse' and navigate to the folder where Windows Easy Transfer installed in (something like7\cable C:\Program Files\Windows Easy Transfer according to your drive letter) "cable" is important. This is the driver. Now click 'ok'.

  9. click on ""Next ' and it should be a small thing of research. " Then when it's done it will probably say that your driver has been installed. It must not be an exclamation mark next to the name in "Device Manager" more.

  10. now run Windows Easy Transfer and it should recognize the cable. It actually automatically recognize the cable now when you plug it in.

  For some reason when you install Windows Easy Transfer it does not install the cable driver and you must do it manually.

  Now, I had another problem with mine. He repeated (on my Win7 machine) that it would take something ridiculous like 4 hours... then on my XP machine, a box would come and say "Trying to reconnect" and everything to stall. Disable your screen saver, screen off and standby (in power settings) on both computers. If that not help I also found that you do the transfer in the sections, do not try to transfer ALL in one session. As I made my photos, and when this was done I did my music, etc...

  I really hope this helps someone. I hope I've heard a few comments!