SBRio has another Vesion real-time

Hello

I'm using Labview 2012 and must stay with this Version for a while.

So now my computer is it time Version 12.0.0 real.

Now I have a SBRio Council with the Version time real 13.0.0.

Is it possible to 'downgrade' the SBRio version 12.0.0.

Or what is the best way to get out of trouble?

Thanks, Ruedi

Hi Ruedi,

Yes, you can downgrade the software currently on your sbRIO. Since you have LabVIEW RT 12.0.0, you can open MAX and expand remote systems. Find your controller and which expand as well (see photo below). From there, you can right-click on the software and select Add/Remove programs. In the example below, I have LabVIEW RT 13.0.1 on my controller cRIO, but I have LabVIEW RT 12.0.1 on my development machine - it is a problem. To resolve this problem, I can simply choose the version of LabVIEW RT compatible with my development computer (that is automatically populated in the window). Once you have finished configuring your software, it will push the software to your sbRIO. I hope this helps!

Tags: NI Hardware

Similar Questions

  • How to copy a file in real time each 5minus from a PC to another PC via LAN network?

    Hello Labviewers,

    Is it possible can labview auto copy drop every 5 minutes from PC1 to another PC in real time?

    Say in the laboratory classroom I have PC1 labview run in real time, collecting data dump in the folder c:\test\testing.xslx

    Then in my Office PC how can copy file in PC1 every 5 minutes. Is it possible Labview is possible? Please help me IV thanks

    How about something like this?

    First map a network location to a 'reader' in Windows.

    Then just use LabVIEW primitive file copy to copy the file.

    Wait five minutes.

    Do it again.

    Yes, it's the bare minimum, and probably not the best way to do as you can't stop the loop with the stop button once the period has begun. But you can see it's pretty simple, if all what you need to do is to copy a file and location, you can map.

  • My daughter has an air of ipad and iphone 6 mounted on a tripod. She would like to use his phone to photograph/video while you watch on his ipad (in real time)... is it possible? If so, what adapter or cable is needed?

    My daughter has an air of ipad and iphone 6 mounted on a tripod. She would like to use his phone to photograph/video while you watch on his ipad (in real time)... is it possible? If so, what adapters or cables are needed?

    Hello!

    Unfortunately, this feature is only available with the GoPro cameras.

    And Yes, if all cables already existing for these purposes, it would be kind of a pain to take pictures and do not shake the camera accidentally. Maybe, VSCO camera makers will make such feature in some time in the future. This idea is excellent and innovative. Maybe even Apple will listen to users and make their new iOS 10.

  • SQLFire has all the apps in real time

    Hello

    Have we not all applications of production or test using SQLFire as a database in real time. If so, vmware has no result, statistics to share in this forum.

    I know it's very beginning as SQLFire himself is in beta version and I believe that as a forward-looking strategy go, SQLFire was set up in any application outside JPetstore.

    Malin

    We were in the middle of finalizing a release and could not answer.

    From the alpha version, there is at least an application running in production.

    There are several ongoing and successful individual oxygen with strict SLA hubs.

    If you have any specific use case we can help you decide how SQLFire fits in these conditions and if meet all expectations.

    Perly, you want to add information?

  • Photoshop has a brush mirror in real time?

    He how to set a brush so that it acts like a mirror?

    If I painted on one side, the other side is painted automatically.

    071.jpg

    I don't know of anyway to do it in real time, but it is easy to copy layers and free transform.  This could make an Action to get there with the keyboard shortcut.

    There are also plugins Kaleidoscope and actions out there that would make it easy.  The plugin does not work with CC 2014

    Kaleidoscope 2.1 Plugin - Mehdi - Plugins Photoshop

  • Debugging on a real-time target - deployment issues

    Dear community,

    After RT my 9651 sbRIO module wiring code, I do tests to check the intended functionality. For this I start my main VI who deploys the code on my SoM and I can happily move forward with my debugging session.

    Sometimes, however, while in the process of deployment, I get an error saying:

    [VI - name] .vi loaded with errors on the target and was closed

    When I open the VI it has no errors and the VI should work a fine might think.

    My solution was so far of the VI, just open move the wires and terminals round, re - save the VI and this is the deployment works.

    This trick worked for a while, because deployment error ca occur arbitrarily on different VI making debugging quite cumbersome.

    I then went ahead and just run the wrong VI in RT mode by moving terminals and structures around to get the VI runs in mode debugging, but it is very time consuming.

    Given that 3 people working on this project and we use git-subversioning I also do not want to "touch" each time just screws for the debugging session will without actually modifying the feature.

    Has anyone encountered a similar experience or perhaps found a magical setting to avoid this subject a lot of time?

    Hello

    If solutions already present Spex does not do the trick for you, clearing the cache of the compiled object can help.

    For more information, take a look at the following link:

    Why my screws are loaded with errors when it is deployed at my target in real time? -National Instruments
    http://digital.NI.com/public.nsf/allkb/7F6502FF0560FA9086257EB3005B13BA

    Concerning

    Alex

  • How do you download a newer version of time Labview real-time in PSC-2200 when is not not in MAX?

    I can't figure out what I need. My PSC 2200 has a version of Labview RT 8.5.1 and fieldpoint 6.0.1.

    I need to be at least RT 10.0 Labview and fieldpoint 6.0.7 because I do Ethernet IP. I don't know that anything more recent that it will work as well.

    As far as I know, I downloaded fieldpoint 6.0.12 and I have the Labview RT 10 module. What Miss me to update software on the cFP-2200 by MAX?

    I don't know another software in the software other than what is currently installed real time Wizard.

    Software shown MAX:

    Any help is appreciated!

    Thank you.

    Wow, Fieldpoint 6.0.1 was released in 2008 - which has been in the LabVIEW 8.5.1 / 8.6 times.  If you want to use LabVIEW 2010RT, you really need to upgrade.

    Try to download and use Fieldpoint 6.0.11: http://joule.ni.com/nidu/cds/view/p/id/3073/lang/en

    LabVIEW Real-time is not "natively" delivered with Fieldpoint or cRIO supported, these happened as part of the RIO or Fieldpoint support modules (so that the most recent versions of RIO or Fieldpoint update your support).

    Who give a shot!

    -Danny

  • Need information about memory in real time

    Hello

    I use sbRIO 9633. I save data in the memory of the sbRIO (via ftp), as well as on the C drive of my computer (via an executable).

    My questions are,

    1. when the RAM is emptied (in other words, I take the target), the details logged on the sbrio via Server ftp does not get emptied. Therefore, when you connect via ftp, which part of memory are stored data? What happens if the memory is full? (as the application should work for years)

    2. that the application runs continuously, the bytes available on the real-time target decreases permanently (I guess) and finally RAM is full. So, do we not have to empty the RAM from time to time?

    3. If I do not add the loop of the newspaper on the RT vi, will decrease the "available bytes" on RT target? If not, then how?

    Hope that my questions are clear.

    (1) NEITHER sbRIO 9633 has 256 MB of memory persistent which is used by the ftp... should be easy to fill, so check the case 'out of memory '.

    (2) NEITHER sbRIO 9633 has 128 MB of RAM and you should read the FreePhysMem property when your application is loaded and determine a threshold to know when it's time to free the memory.

    (3) this can be done by the host (PC), by logging system (ip target) required.

    In my case, the memory used by the network flow increases over time, and I trigger to reset the stream to release the RAM.

    It may be useful

    Christian

  • Control of data using multiple thermocouples via indicators and the waveform in real-time

    I apologize in advance for this question is probably a bit simple but I'm all new to labview and the forum and could use some advice. I have a CompaqDAQ with two 9213 16 modules of track and I'm trying to read in 30 thermocouples in a waveform, but also display 30 indicators so I can mark each indicator with the thermocouple for real-time tracking. Each thermocouple corresponds to a specific location and it is essential that the interface has an accurate indication or a label for each of them. I wonder if there is an easy way to do this in addition to split the signal and have 30 thermometers on my diagram? Perhaps a table any? If I use a table to create 30 thermometers, the DAQ assistant automatically sorts the thermocouples according to ascending numerical order. For example, would be the indicators of first and second on my interface automatically assigned to channels a0 and a1 of the first module, or should I do it manually? Even for the waveform?  Thank you very much!

    PS - Do not know if this message had need of more details, but let me know if more information is needed, and I'll give you!

    I see that you use the DAQ Assistant to create your task.  Now I understand why you may have about labelling.  It is easy of the seller NOR spiel booting...  But in any case, you already have a task to the MAX instead of use the DAQ Assistant?  The interface is similar and there may be a step or two, but your end application will be more effective and you will have more options with your data and properties.  For example, I tried to update the names of physical channel in the DAQ Assistant installation program, that it let you do, but it propagates that change forward to waveform chart legend.  Also, I don't know any property for this dynamic data type node, although I never use it either.  I suggest the setting up of your task and channels, Max if you'd give it a go.

    Since I thought I didn't really takes you all the way with you help, I wrote another one.  It uses a cluster, even if it's a bit barbaric.  I thought that there was a more eloquent way to do by changing labels, but I could not it works as I had expected.

  • Dialog box to open the file on the target in real time

    It is possible to load data from a file on a local PC to a VI runs on an RT target? I have a RIO OR the VI running on. From the front panel, I want to be able to click a button and have a dialog pop up where I can choose a local file to load data from. The problem is that when I try to use the spreadsheet VI load data it returns an error indicating that the dialogue has been canceled. If I use the express VI from file dialog, the VI will always return true to cancel. The dialog box never appears. It is not possible to open a local file to a VI runs on a real-time target?

    Jon VT-

    This function will not work in time real (RT).  Please see the bulletin 2S9D21OH knowledge base: creation of a dialog box file for use with LabVIEW Real-time for more information on this.  However, it only locates the files on the target of RT.  If you try to communicate with a file on your host computer, you can be forced to transfer this document to the target of RT, or implement a different architecture for this task.  I would also add that given the user to define the source of the file manually create non-determinisme within your system.  Again, it is perhaps another reason to implement a different architecture.

  • Browse the contents of the hard disk of the target in real time

    Hello

    Is there an easy way to browse the content of the hard drive on a real-time target by using the file path control (or another type of control)?

    What I have in my application is a PC real-time desktop (running on PharLap) who has a Main.vi running on it. There are a few configuration files (for this VI) I want to be able to read and record to that would be stored on the hard drive of the target in real time. However, when the application runs and I hit the Browse button, it displays the contents of the Windows machine and not the machine in real time. Is there something I'm missing?

    Please note that I can send via FTP on the Windows computer to the target in real time and can interact with the drive of the target in real time without any problem.

    Thank you.

    Mike

    If you LV 2013 actually use WebDAV screws thus:

    http://digital.NI.com/public.nsf/allkb/4EBE45E8A816B19386257B6C0071D025

    http://zone.NI.com/reference/en-XX/help/371361K-01/lvcomm/WebDAV/

  • Hearing feedback in real time program: hardware configuration

    We had access to a LabView (of another laboratory) program that records the sounds and gives audio feedback in real-time based on the analysis of the spectral structure of the input sound. The current combination of equipment that we have in our lab is the Daq 6259 PCI card and a BNC-2110 connector. The laboratory of donors had run a set consisting of PCI 6221 Daq card and connector BNC-2090. I'm studying the manuals for the four pieces of hardware to determine if our hardware configuration can be used with this LabView program. The main difference I found is that the connector BNC-2090 has DACout connectors, which lacks the BNC-2110 (my setup). I don't know if that alone will make it unnecessary for use with this LabView program.

    I continue my study of textbooks to go further, but it would be useful that some experts could give its opinion on it. In this way, I could do a faster purchase decision.

    Thank you!

    Anand

    Hello Anand,

    2110 has analog output BNC connectors that expose up to 8 channels of analog output on your Data Acquisition device. Please take a look at the below picture of the BNC-2110 (page 3) user manual and following section which discusses the analog pins output BNC (page 6).

    Best regards

    Izzy O.

    Technical sales engineer

    National Instruments

    NI.com/support

  • No device available in real-time on desktop PC mode

    An acquisition of data of my friends computer built in the following maps:

    PCI-6229
    PXI-6259 (via the pxi-1033 chassis)

    They are very well known and work perfectly start this computer with Windows XP.

    If I start that computer with a hard drive in real time of "Microcomputer", I don't see any two devices in MAX. I do not see the PXI-1033 chassis, but all locations are listed as empty.
    I would have assumed that at least the PCI-6229 would show up - but no.
    My desktop PC real-time system has all of the installed packages available.

    What can be the problem?

    Hello

    Hello and I hope that your well today.

    Thanks for the post!

    If you try to bit the PC in real-time under remote systems in MAX from another machine?

    What version of DAQmx did you installed on the remote PC in real time?

    Lack of devices OR-DAQmx in Measurement & Automation Explorer (MAX) under systems remotely (target real time)

    http://digital.NI.com/public.nsf/allkb/6B06A4E228CF62098625750000614B57?OpenDocument

    Deployment of DAQmx on PC in real-time

    http://digital.NI.com/public.nsf/allkb/79CB44F7E228AED88625756E00445151?OpenDocument

    Hope it starts to help,

  • Real-time using RS232 communication

    Hi all

    I want to read a serial port at all times. Transmission speed is 2400. All the 1 sec 5 data packets are sent by the transmitter (hardware). Data package consists of 4-byte ASCII character as-A, d1, d2, d3. . Where A is used for synchronization of the data set, because d1, d2, and d3 are random and should be isolated for furthur v.f.. Here I am attachng my VI.

    Problem:-instead of get 5 packs in 1 second I'm receiving only 2 packages in a second.

    Questions:-ground for above problem? Y at - it another way to do it in real time. ? improvements to the VI Suggetions.

    Please answer for above post your answers will be a great help for me. Please do not hesitate to ask any necessary clarification.

    Thank you!

    @smercurio: Thnak you for your response. You are correct that globle variables were used to transmit the data received from other loops. As you say I will use local variables instead of globle variable.

    In addition, I would like to indicate more clearly that I forgot to mention that each byte 4 data are transmitted in the interval of 200ms. This 200ms includes the time required to transmit also the 4 bytes.

    Earlier, my second loop has been integrated into the 1st loop itself. But since I was getting only 2 packages instead of 5 in one second, I removed this reflection to loop 1st form it might take time for the loop iteration. But stil problem is not solved.

    Do you not assign data received by globle variable is taken on time?

    Note * I have varified 5 packet rate / sec using Terminal Server.

  • Pass an array of real-time desktop PC

    Hello

    I recently started using LabVIEW Real time. I want to transfer an array of data from a PC to office to a PC in real time. The data transfer is time and once real PC will make further processing of the data. I'm using LabVIEW 8.2 and the corresponding version of the time real LabVIEW. I do not understand how to program the time real PC to receive all the elements of the array in the order. Below is a brief description of what I've tried so far.

    At the beginning, I created a shared variable on the computer which was the data type double target. I activated "Buffering" and set the size as 10 double rooms. Enable FIFO tab real-time time real FIFO, selected several items and set the size as 10 double rooms. On the desktop, I used a loop for to transfer all the elements of the array in the shared variable. I used a 500 ms delay in the loop for debugging purposes. On the target side PC, I used a while loop, the same delay of 500ms and built a table reading the shared variable. To run the program, I ran the VI on the target PC and then the VI on the host. I could see that the painting was being filled with data from the host computer, but the first element of the array of host PC has been filled in the second element of the array on the computer target. Another problem, is that there is no way to prevent the target computer that the host PC had sent all the data and he had to stop the filling of the table. The first problem with lag of data can be attributed to the timing. But I don't know how to solve problems.

    I also tried declaring the variable shared on the computer target with the double data type 'Array of '. But when the data is passed from the host PC for the target computer, I don't see the variables reflected on the target computer.

    Is could someone please tell me what error I do here?

    Hello

    The problem has been resolved. It is LabVIEW time real 8.20 which has been altered. Therefore, did a re-installation of LabVIEW. Now I have the sample project attached (ex2.zip) in the previous post works perfectly. Thank you for your help.

    Kind regards

    Prashant

Maybe you are looking for

  • iPhone is disabled and unresponsive to iTunes.

    Hello. I have managed to disable my iPhone SE by typing the password wrong too many times. It says I need to connect my phone to iTunes. Tried, but without success. When I try to make the recovery mode, it stops and starts upward, as it is supposed t

  • Bookmarks has not transferred any Safari on Mac

    Even if I checked the box to transfer all the bookmarks from Safari to Firefox, none has. What am I doing here?

  • x 220 - which is the USB 3.0?

    I have the x 220 with intel i7 chip and one of the usb ports 3 is supposed to usb 3.0 - which is it? Thank you!

  • Chess titans game screen

    my game of chess titans went to a bigger screen. No poster do not bar message of the upper left corner to change from black to white playing pieces or to undo a move

  • admin password does not

    Connect as admin using the cpu, went to bed, woke up with cpu off (I / or someone else has done to turn off the cpu).  He turned back and now I can not login as administrator.  The password has not changed.  I have an account of the quest, but all my