SBS 2011 no usb drives

Similar Questions

• BSOD drives when adding T110 ii with PERC H200 and SBS 2011 or Server 2008 R2-

  Bought the server next in November 2011

  PowerEdge T110 II

  ManufDate: 24/10/2011 market: 06/11/2011
  RAM: 16 GB (4 x 4) 1333 mhz UDIMM DualRanked
  Processor: Xeon E3-1270 3.4 Ghz, 8 M cache, Turbo, Quad Core/8 t (80W)
  RAID: Map Perc H200
  Drive: 2 x 600GB 15K RPM SCSI 6Gbps 3 .5in - RAID 1 Mirror SA
  SBS 2011 standard x 64 (works on Win 2008R2)

  SBS 2011 installed without a problem and the server works perfectly since December 2011.  Backups occurring twice per day to a USB attached hard drive external 1.5 to and OS patches applied on a monthly basis without problem.

  Company need more storage so it wanted to add 2 drives more (same spec as to purchase). I thought to try to turn the RAID 1 pair in RAID 10 set in order to keep the simple logical configuration (a single large logical volume which now seems to be 1.2 TB in size instead of 600 GB) - could get but not really someone to describe if it could be done for non-destructive way that requires not the complete system installation/restoration - so opted for just add the 2 new drives as a RAID extra 1 pair in order to not reach a stable, boot, partition operating system running on the current RAID 1 pair.

  Contracted for the Dell technician to come out to install 2 new readers, be clear that the service was not complete until I had an extra pair of RAID 1, appearing as a usable operating system.

  Technician arrived, installed readers, set the new RAID pair in the H200 configuration utility, rebooted the system and when the BONES began to load had a blue screen BSOD. Technician then disconnected drives newly associated (the level of the cables) to see if the system would boot - BSOD again on restart (both of now get us this "pleated" feel if you know what I mean). Then went into the raid configuration utility, removed the new raid 1 volume (which, by the way, is appeared above the one existing in the list - which is not very intuitive that one that has been added is Volume 1 and the existing old is Volume 2 in the utility). After the triple-checking that we had the right volume (it showed that 8% initialized over the other which was complete, as well as the corresponding drive port numbers), we have REMOVED the new volume (at this point I don't remember if we had replaced the cables for the readers to perform this action).

  At startup the system rebooted normally - we were all so relieved, don't talk over retries at the moment.

  Talk to Dell there seems to be a problem with the PERC H200 firmware or drivers. Has not affected the config initial of a single pair of RAID 1, however caused problems when you attempt to add another pair. Escalation of Dell support said that has happened several times with Windows 2008 (which comes from the SBS 2011) systems. They recommended that the firmware update and the PERC H200 card drivers.

  I turned to the technician and asked when we could plan the updates of the firmware and driver and told him that they wouldn't do that (not sure that I blame the poor guy, he was sweating bullets after the BSOD 2nd).  I explained that we have contracted for installation services which included ensuring that the pair of extra disk appeared also usable for the operating system and he said that I needed to talk to Dell that.

  You wanted to post information on issues with PERC H200 BSOD when adding disks on Win2008 (or SBS 2011).

  Waiting for response from Dell as to who will come on-site to complete the installation.

  Any info about the question to know if the update of the firmware/driver will solve the problem or if I can do with reliability a disk 2 RAID 1 for a 4 disk RAID 10 conversion without having to reinstall/restore system would be appreciated.

  There is NO migration route TO or FROM a nested RAID levels (10, 50, 60) on one of the PERC H series, so it goes from 1 to 10 of RAID is not an option (without backup/replace/create/restore).

  Firmware release notes do not indicate that a large part is added (although the "bugs" may be enough):

  -Addition of Support for > 2.2 to SAS hard drives

  -Small bug fixes

  I have not seen/heard talk of this problem (I don't have a H200), but it is possible that an update of the firmware can change the way it handles the new disks, newly configured RAID arrays, or even how it presents to the OS.

  Do you know if the technician checked to see if the original VD was marked as boot VD?

• SBS 2011 Setting Up mapped drives in group policy

  I have a fairly new implementation of a SBS 2011 Standard on a domain with 5 computers and users.  I have mapped network drives setup in as explained on TechNet group policy.  And also on the server and a workstation, I run gpupdate/force successfully.  I even restarted my Win7 computer. However, the drive is not be mapped to the client.

  Here are my parameters of GP for mapping:
  Group Policy Management / Forest: bhp.local / domains / bhp.local / MyBusiness / computers / SBSComputers.
  There are 3 default policies already created here...
  1 Windows SBS Client - Windows 7 and Windows Vista policy
  2. Windows SBS Client - Windows XP strategy
  3 Windows SBS Client policy
  User configuration / preferences / Windows settings / Player cards / card reader (reader: M) / M: (order: 1)...
  General...
  Action = create
  Letter = M
  Location = \\Bhpserver\mt5
  Reconnect = on
  Label = Meditrax
  Hide/show this drive = show
  Hide/show all drives = no change
  Common...
  Yes = remove this item when it is no longer applied (just changing Action = Create action = update)
  The settings above were made to all the default fonts listed 3 above (Win7/Vista, XP and the Tote)
  Any help is greatly appreciated.
  Brian

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Windows 7 Forums. Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this helps

• SBS 2011 ceased to recognize drives external, used for the backup of the shadow

  I have two external drives used for backup on a SBS 2011 server. The other one is a WD drive a Seagate. Shadow copy not now don't recognize either drive.  Both drives worked on the server for about 9 months and are not anywhere near full capacity. The server is now saying that it can't find the drivers for external drives, he previously used the last 12 months. Both drives have been tested, are recognized and work correctly in any windows 7 computer. Is there a way the GET the server again recognized the readers?

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  Small Business Server

  Hope the helps of information.

• SBS 2011 drivers needed

  Pavilion P7-1410 supplied with Windows 8 OS; installation of Small Business Server 2011. Installation fails due to lack of drivers (e.g., network, Ethernet, USB). Download driver HP account Windopws 8 drivers. How can I get the necessary drivers for SBS?

  I saved the Win 8 drivers before reformat the drive, but they do not work for SBS.

  Hello:

  Unfortunately, I don't think that you will find the drivers for this operating system - even from the mfr websites.

  I just checked the Realtek Web site for the drivers for the ethernet controller, and there aren't any.

  They have Windows 2008 server, but not 2011.

  Specifications to run SBC 2011, the minimum hardware requirement is a quad core processor, which is not your PC.

  Windows Small Business Server 2011

  Small business doesn't have to limited operation. With Windows Small Business Server (SBS) 2011, you get a complete solution, designed for customers who want to technologies of the company in an all-in-one package that is adapted to the needs of small businesses and priced accordingly. Windows SBS Essentials is the ideal solution for businesses with 25 users or less and Windows SBS 2011 Premium add-on provides a flexible and economic solution for the deployment of additional servers.

  • Get the best first server for your business with SBS 2011 Essentials: Enjoy full support for your small company of 25 or fewer users with this server designed to facilitate connection to the cloud and integrate with local and online services.
  • Protect client and Server data : Easily back up your data on internal or external hard drives.
  • Enter your business safely network: Remote Desktop Web Access allows you to access your network securely.
  • Keep in touch with the support of the mobile device: Work from your Windows Phone 7 or other phone compatible Internet.

• How to install windows 8.1 iMac (27 inch, mid 2011) without DVD drive and race El Capitan

  Hello! How to install windows 8.1 iMac (27 inch, mid 2011) without DVD drive and race El Capitan?

  I read everything I could on the subject and could not get the Boot Camp Assistant to create the USB key. Can you help me?

  Boot Camp Version 6.0.1

  If you run the wizard of BC, are you give the possibility to create an installer from USB? Did you change Bootcamp Info.plist file?

• Cannot drag and drop external USB drives

  Hello

  All of a sudden, I can't drag-and - drop or copy and paste all the files on an external USB drive. Windows Explorer stops and restarts each time. A ran the antivirus, malware, CC Cleaner etc and its still the same. Also tried in safe mode.

  The event log is as follows:

  The failing application name: explorer.exe, version: 6.1.7601.23418, time stamp: 0x570898dc
  The failed module name: psdprotect.dll, version: 3.1.76.0, time stamp: 0x4aa9003b
  Exception code: 0xc0000005
  Offset: 0x00000000000012de
  ID of the process failed: 0 x 1450
  Start time of application vulnerabilities: 0x01d1cb1bc9f4ea6a
  The failing application path: C:\Windows\explorer.exe
  Path of the failing module: C:\Program Files (x 86) \EgisTec\MyWinLocker 3\x64\psdprotect.dll
  Report ID: bea55c9d-3711-11e6-981a-00262d7bb69c

  Is this average Winlocker is the cause? Winlocker on my PC for years without any problem.

  Thank you

  Hi, I managed to solve the problem by uninstalling winlocker. I had open Séverine deep and burn the files on DVD first, but I seem to have lost the 30 GB partition that he once used it uninstalled.

  Yes, I came to the same conclusion - uninstall mywinlocker (a dll shared with windows Explorer which has become corrupted). The dll is: psdprotect.dll, version: 3.1.76.0

  Here's what I think happened in my case:

  Microsoft automatically installed Windows 10 on my system. I wouldn't use it and returned to my old operating system (Windows 7).
  During the re installation, Microsoft provided updates for some files (cela "should include" to explore shared dll) HOWEVER, mywinlocker (part of an independent program that was originally installed on my system in 2011 - the old dll remained in place).

  Since Explorer windows update needed now the newer dll - this is why I think that the program was not.

  To know if you have this problem - check your event logs to see what error

  Start / eventviewer / windows logs / request - find the brand red exclamation (view)
  That's what my error looked like:

  The failing application name: Explorer.EXE, version: 6.1.7601.23418, time stamp: 0x570898dc

  The failed module name: psdprotect.dll, version: 3.1.76.0, time stamp: 0x4aa9003b

  Exception code: 0xc0000005

  Offset: 0x00000000000012db

  ID of the process failed: 0xeb4

  Start time of application vulnerabilities: 0x01d1cbf05e82786e

  The failing application path: C:\Windows\Explorer.EXE

  Path of the failing module: C:\Program Files (x 86) \EgisTec\MyWinLocker 3\x64\psdprotect.dll

  Report ID: 189edf94-37e4-11e6-a2db-90fba64d1d10

  I do not use Mywinlocker, so I simply uninstalled the program. But if you use - you'll want to put the information before you uninstall.

  Once uninstalled - explore should work again. If this isn't the case, you may have remaining broken DLL. To run a system cleaner to solve these issues.

  Thank you Moderec for pointing me in the right direction. Like you, I surfed the web to find answers and none of them took into account Mywinlocker. It took some time to solve this - was grateful to finally get fixed! Bravo!

• SBS 2011 and Windows 2008 file share

  I have a sbs 2011 and a regular Server 2008 domain. I need to set up a file share that can see both areas. I discovered what a normal two-way transitive trust between them is a bad idea. Wanting to know if there is a better way to do it by side just setting up user accounts in the regular field of 2008 (where the share resides) which corresponds to the account of sbs domain, setting up the collective right to the share, and map the drive to the sbs domain workstations. I don't like this method because changing a password on the sbs domain would require a manual modification to synchronize on the regular field.

  Hi Mialbert,

   

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet (Small Business Server) Forum

  http://social.technet.Microsoft.com/forums/en-us/home?Forum=smallbusinessserver

   

  Hope this information helps.

• How to install usb drive external hard disk in hpe-410f

  I booted up and logged samsung usb drive external floppy (SFD-321U) and windows did not find driver on the computer or to the internet or after google-ing substantial. I use windows 7 professional 64 bit. the floppy drive worked ok when I was with my old computer (Win XP) who died after 7 years of.  All hope for the installation of the floppy drive on my desktop win 7?

  The author of the driver package has since removed the files. It has been mentioned only in 2011.

  The Samsung drive is to Win98/XP. No Win7 drivers.

  The drive I linked is the current technology. It is supported by WIN7.

• SBS 2011 DVD wouldn't work, cannot restore.

  I recently had a scare at the restoration of SBS 2011.

  Basically, I had a problem where I couldn't boot into windows server 2008.  I do daily backups of windows, so I thought no worries, I will simply bring until yesterday.  I started on Windows SBS 2011 DVD I used to install it and click on restore and it told me that it wasn't the right version for the restoration, even if it's the CD that I used to install it (I upgraded service pack for installation).

  Basically I could not access the restorations on my backup drive because he told me that it wasn't the same version of windows.

  How can I fix this is do not have another DVD and windows do not allow me to create a restore in WIndows 2008 server startup disk, as they now rely soly on the installation DVD?

  Part of the problem may be the server that is installed was a server Fujitsu requiring the installation of sbs in a quite unique way which was a pain, but I guess only on that.

  Please help!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Help with Vmware Fusion & SBS 2011 Essentials; best practices

  Hi all

  Looking for a little help setting up a virtual machine on a Mac Pro to use as a server in a small business.

  We currently have an office of 6 users, all but one of which are windows users (XP and 7, although all soon to be upgraded to 7). Also, we have a Server SBS 2003 and until recently used it for storage of files, a database principal, Exchange and vpn. The server hardware has become very noisy to the point of this embarrassing other users in the room I'm looking to upgrade options.

  The machine I use now is a 2 x 2.66 GHz Dual Core Intel Xeon with 10 GB of RAM and I'm looking for this move with the to use with the server I'll be swapping to a MBP 17 ". I installed a trial version of SBS 2011 Essentials on it and have successfully installed the main and used database from a client machine so I'm glad that everything will work. We went from the e-mail Exchange on Gmail, which is why Essentials is good enough for me.

  I'm stuck now with what to know how to set up the machine to integrate properly. I have a 250 GB boot currently installed with Snow Leopard disk and that you have ordered 2 x 1.5Tb hard drives I had planned mirror in OS X using disk utility. The plan was part of the 250 GB boot drive partition (say 100 GB) to use as a separate partiton on which to store virtual machines. The record 1.5 to had to be kept separate and used as a data reader.

  I'm not sure now, that's how all of them work with SBS 2011? Can I move forward as expected and share the drives through OS X (SL or Lion server) as a network share? If so, how it plays with windows clients? Can I use AD control connections or I end with a mixture of OD and AD (which would be an argument)

  Or should I install SBS 2011 on the disks of 1,5 to, spend the entire disk to SBS 2011 and treat sharing here?

  By train to these things is not a problem, it's just trying to understand what is the best solution for day-to-day management and backup.

  Thanks in advance.

  Give points to Woody, by all means!  Sorry that SBS isn't my area, but if you want to watch using scripts to control your virtual machine, you can find these useful URLS:

  http://communities.VMware.com/docs/doc-1201

  and

  http://www.VMware.com/PDF/vix162_vmrun_command.PDF

  Of course, you could also turn on the accessibility of Mac (System Preferences > universal access > enable access for assistive devices and use AppleScript or other Mac automation technologies, such as ATOMac (https://github.com/pyatom/pyatom).)

• How can I migrate a time machine backup external USB drive to time capsule

  Searched the forums and can't seem to find an answer. With the help of El Capitan 10.11.6. You want to transfer backups Time Machine 4 years on an external USB drive on my new Time Capsule. Any ideas would be MUCH appreciated.

  There is no official method because it has problems.

  There's no official way.

  Here see Q18. http://pondini.org/TM/FAQ.html

  We recommend that people not me there. It has not proven reliable long-term. Start a new backup on the TC and keep the USB stick in the form of archive. After a few months or a year you won't have it.

  You have to understand the Time Machine backup otherwise locally the CF network. It is easy enough to move the backup network local but much harder the other way around.

• How can I make an external USB drive read-only?

  I'm trying to find a solution to take a USB HD in a spacing classified environment / air.  If I can make the drive read-only (like I gave him that I need to copy on these machines), then the Agency will probably approve the device.  I can't use DVDs that data are 30 + GB in size.

  Hey there, capsfanva!

  Welcome to the communities of Apple Support! It seems you need to set permissions on an external USB drive or hard drive. These permissions setting is a great way to improve the security and privacy of these elements. You've come to the right place and you will find the answer below. You must connect the device to your computer and follow these steps:

  Set permissions for the items on your Mac OS X El Capitan:

  See you soon!

• Display a dialog box after the ejection of a USB drive, saying the car was ejected

  Hi, would someone please tell me how to change the applescript below to eject my USB in 2 ways, either by waiting 30 seconds by pressing the button "YES". Then, once the disc has been ejected another dialog box would appear to say 'eject disk '. If 'NO' button has been activated the reader wouldn't be ejected. My USB is indicated as (the present book).  Thanks in advance for any help.

                                                              tell application 'Finder '.

  display the dialog box "Eject USB drive?" default button 1 with the title "Eject?" buttons {'yes', 'No'} give up after 30

  If the button returned of the result is 'yes' then ejection of the this book

  tell the end

  Here:

  Tell application "Finder".

  Display dialog "Eject USB Drive?" buttons {"Yes", "No"} default button 1 with the title "Eject?" give up after 3

  If the result back button is 'yes' or abandoned then of the result

  This book of ejection

  display the dialog box 'Disc ejected.'

  end if

  tell the end

  (143586)

• Move backup by USB-drive to Time Capsule

  I used to make with Time Machine backups on an external USB drive. Now, I would like to move these old backups to my new Time Capsule.

  Is this possible? And how do I do it?

  Thank you

  Click here and follow the instructions.

  (143017)