SBS 2011 Server Add backup disk

Similar Questions

• Should I SBS 2011 Standard and SBS 2011 Premium Add on?

  I am currently the cost of the replacement of our old server (SBS 2003).

  It is identified what it takes 2 servers - the main server and a database to run on the SQL database server.

  However I buy SBS 2011 Standard and SBS 2011 Premium add-on?

  Premium add-on contains SBS 2011 Standard? If so only can I buy Premium add-on pack and install Standard on the main server and add on (SQL Server, etc.) on the database server?

  Hello

  The question you have posted is related to the server. So, I suggest you to report your queries in Microsoft TechNet Forums for a better response.

  Here is the link: http://social.technet.microsoft.com/Forums/en-us/smallbusinessserver/threads

• iDRAC Express and SSO on a SBS 2011 Server

  Hello

  I have a Dell Poweredge R510 running Small Business Server 2011. Holders of SBS that only a single NETWORK adapter connected so my NETWORK adapter has an IP address for the server and a different IP address for the IDRAC Express card that is installed on the box on the same physical port.

  I'm trying to configure the server for SSO and it is unable to resolve the DNS server (which is, of course, the Small Business Server) and therefore ' behind' shared NIC port.

  I can't use the second NETWORK card, because this is not a configuration supported by SM.

  Someone at - it ideas?

  Thank you

  Mark

  Thank you - we're sorted. The TGT error persists, but he connects with the FULL domain name.

• Removal of the SBS 2011 server how to migrate DHCP and DNS services to the firewall

  I have a small client that has an old server that comes close to falling; its off primary runnign the disk space and must often be restarted.  they do not need the server and it was decided to remove the server and use a working group with NAS drive for their records.  They have a sonicwall firewall that can handle all DHCP services.  All computers have disjoint form field, all profiles will migrate the workstation's local user accounts.  all work, printing, file sharing and internet services.  When the server is stopped, after about 10 minutes the network goes down and I can't even log into the firewall.

  How I got out of shape services DHCP from the server to the firewall?  the firewall has active DHCP and the range of rental contract is configured correctly, but cann no PC connect when the server is off.

  Im trying to finish this tomorrow so if anyone can help me tonight it would be very appreciated...

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• How can I delete a file that my SBS 2011 server thinks is used by another process?

  We are moving the files from one disk to a larger drive.  I was able to move all the files in a directory (is there a lot), except a single file.  Our server thinks that this file is used by another process.  It is not.  I tried to use the cmd prompt to delete the file, but that did not work.  I tried theRmDir /S /Q, I tried the old del (name of file) I continue to get the message this file is in use by another process.  I have changed all of the security on this file, I unchecked the boxes for archiving.  Nothing works.

  

  Any advice?
  

  Thank you.

  Hello

  Welcome to the Microsoft Community forums.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
  http://social.technet.Microsoft.com/forums/en/category/SBSServer

  Hope this information helps.

• SBS 2011 - server of Hub Transport Exchange 2010 manage internet SMTP

  We want to confirm the SBS2011 - Exchange Server 2010, can we just install the Hub Transport server to handle internet SMTP

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the appropriate Forum TechNet. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/categories/

• SBS 2011 ceased to recognize drives external, used for the backup of the shadow

  I have two external drives used for backup on a SBS 2011 server. The other one is a WD drive a Seagate. Shadow copy not now don't recognize either drive.  Both drives worked on the server for about 9 months and are not anywhere near full capacity. The server is now saying that it can't find the drivers for external drives, he previously used the last 12 months. Both drives have been tested, are recognized and work correctly in any windows 7 computer. Is there a way the GET the server again recognized the readers?

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  Small Business Server

  Hope the helps of information.

• Why the Windows Vista client gets the IP address of the Windows SBS 2011 as default DNS server?

  I use Windows Vista on a client computer that is connected to our Windows Server SBS 2011 server. I don't want to use the DNS server on the local server and the DNS addresses are automatically collected on our router. Every time I have to restart my computer or disconnect / reconnect the connection to the local network, the default DNS server address is set back to static and has the IP address of the local server, which makes it much slower DNS specifications.

  Can I disable this automatic update of address of DNS server somehow? In fact, I don't want to run a DNS server on the local server.

  Thank you to inform in advance!

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet forums.

  http://social.technet.Microsoft.com/forums/en-us/categories/

• SBS 2011 drivers needed

  Pavilion P7-1410 supplied with Windows 8 OS; installation of Small Business Server 2011. Installation fails due to lack of drivers (e.g., network, Ethernet, USB). Download driver HP account Windopws 8 drivers. How can I get the necessary drivers for SBS?

  I saved the Win 8 drivers before reformat the drive, but they do not work for SBS.

  Hello:

  Unfortunately, I don't think that you will find the drivers for this operating system - even from the mfr websites.

  I just checked the Realtek Web site for the drivers for the ethernet controller, and there aren't any.

  They have Windows 2008 server, but not 2011.

  Specifications to run SBC 2011, the minimum hardware requirement is a quad core processor, which is not your PC.

  Windows Small Business Server 2011

  Small business doesn't have to limited operation. With Windows Small Business Server (SBS) 2011, you get a complete solution, designed for customers who want to technologies of the company in an all-in-one package that is adapted to the needs of small businesses and priced accordingly. Windows SBS Essentials is the ideal solution for businesses with 25 users or less and Windows SBS 2011 Premium add-on provides a flexible and economic solution for the deployment of additional servers.

  • Get the best first server for your business with SBS 2011 Essentials: Enjoy full support for your small company of 25 or fewer users with this server designed to facilitate connection to the cloud and integrate with local and online services.
  • Protect client and Server data : Easily back up your data on internal or external hard drives.
  • Enter your business safely network: Remote Desktop Web Access allows you to access your network securely.
  • Keep in touch with the support of the mobile device: Work from your Windows Phone 7 or other phone compatible Internet.

• SBS 2011 Bootmgr missing

  I have a Dell T110 II with SBS 2011 Server installed. I get an error message Bootmgr missing

  When I boot to the installation media and select Repair, the repair goes directly to recreate the Image on your computer and does not give me the options described in https://support.microsoft.com/en-us/kb/2501318

  I have a backup, but would rather just repair the bootmgr but I can't go to the repair of the tools on the installation media

  Thanks for any help.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• SBS 2011 VSS errors - Spfarm keeps recreating

  Several SBS 2011 server we installed continue to flow upward with errors of 1736 SPFARM.

  We followed the guide here: http://support.microsoft.com/kb/2537096

  This works perfectly, however after a few weeks the spfarm registry key has re-created itself, so to appear these mistakes again. We still delete it and it keeps recreate it.

  Has anyone else had this issue and how to resolve?

  It serves as a forum, people using Windows home versions and you will likley not to get a good answer here, use instead of Windows Server support forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• BSOD drives when adding T110 ii with PERC H200 and SBS 2011 or Server 2008 R2-

  Bought the server next in November 2011

  PowerEdge T110 II

  ManufDate: 24/10/2011 market: 06/11/2011
  RAM: 16 GB (4 x 4) 1333 mhz UDIMM DualRanked
  Processor: Xeon E3-1270 3.4 Ghz, 8 M cache, Turbo, Quad Core/8 t (80W)
  RAID: Map Perc H200
  Drive: 2 x 600GB 15K RPM SCSI 6Gbps 3 .5in - RAID 1 Mirror SA
  SBS 2011 standard x 64 (works on Win 2008R2)

  SBS 2011 installed without a problem and the server works perfectly since December 2011.  Backups occurring twice per day to a USB attached hard drive external 1.5 to and OS patches applied on a monthly basis without problem.

  Company need more storage so it wanted to add 2 drives more (same spec as to purchase). I thought to try to turn the RAID 1 pair in RAID 10 set in order to keep the simple logical configuration (a single large logical volume which now seems to be 1.2 TB in size instead of 600 GB) - could get but not really someone to describe if it could be done for non-destructive way that requires not the complete system installation/restoration - so opted for just add the 2 new drives as a RAID extra 1 pair in order to not reach a stable, boot, partition operating system running on the current RAID 1 pair.

  Contracted for the Dell technician to come out to install 2 new readers, be clear that the service was not complete until I had an extra pair of RAID 1, appearing as a usable operating system.

  Technician arrived, installed readers, set the new RAID pair in the H200 configuration utility, rebooted the system and when the BONES began to load had a blue screen BSOD. Technician then disconnected drives newly associated (the level of the cables) to see if the system would boot - BSOD again on restart (both of now get us this "pleated" feel if you know what I mean). Then went into the raid configuration utility, removed the new raid 1 volume (which, by the way, is appeared above the one existing in the list - which is not very intuitive that one that has been added is Volume 1 and the existing old is Volume 2 in the utility). After the triple-checking that we had the right volume (it showed that 8% initialized over the other which was complete, as well as the corresponding drive port numbers), we have REMOVED the new volume (at this point I don't remember if we had replaced the cables for the readers to perform this action).

  At startup the system rebooted normally - we were all so relieved, don't talk over retries at the moment.

  Talk to Dell there seems to be a problem with the PERC H200 firmware or drivers. Has not affected the config initial of a single pair of RAID 1, however caused problems when you attempt to add another pair. Escalation of Dell support said that has happened several times with Windows 2008 (which comes from the SBS 2011) systems. They recommended that the firmware update and the PERC H200 card drivers.

  I turned to the technician and asked when we could plan the updates of the firmware and driver and told him that they wouldn't do that (not sure that I blame the poor guy, he was sweating bullets after the BSOD 2nd).  I explained that we have contracted for installation services which included ensuring that the pair of extra disk appeared also usable for the operating system and he said that I needed to talk to Dell that.

  You wanted to post information on issues with PERC H200 BSOD when adding disks on Win2008 (or SBS 2011).

  Waiting for response from Dell as to who will come on-site to complete the installation.

  Any info about the question to know if the update of the firmware/driver will solve the problem or if I can do with reliability a disk 2 RAID 1 for a 4 disk RAID 10 conversion without having to reinstall/restore system would be appreciated.

  There is NO migration route TO or FROM a nested RAID levels (10, 50, 60) on one of the PERC H series, so it goes from 1 to 10 of RAID is not an option (without backup/replace/create/restore).

  Firmware release notes do not indicate that a large part is added (although the "bugs" may be enough):

  -Addition of Support for > 2.2 to SAS hard drives

  -Small bug fixes

  I have not seen/heard talk of this problem (I don't have a H200), but it is possible that an update of the firmware can change the way it handles the new disks, newly configured RAID arrays, or even how it presents to the OS.

  Do you know if the technician checked to see if the original VD was marked as boot VD?

• Hi, we are a provider of disability. We have SBS 2011. Access 35 server now. You want to 125 so they can get the email and sharepoint.see below:

  Hi, we are a provider of disability. We have SBS 2011. Currently we have about 35 access to the server. - 9 direct to the server and remotely via web browser rest (we understand it goes to 75 licenses?) We want to add our support staff total 125 to pass the email and sharepoint. Only 35 max could be connected at all times. We have about 35 PC that would have access to the main server of 10 sites. do we need to move away from SBS 2011?... Thanks Jack

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

• Server standard SBS 2011 when adding computers to domain 404 file or directory not found error

  I settup a SBS 2011 standard on the DHCP server running on the domain server because we use the router to distribute ip to the clients. When I try to add computers to the domain, I get an error (404 file or directory not found) on the client side. I gave the ip of the DNS client-side still the same error to come... but I can connect on the client side to the server by using the name of the server or ip address... If anyone can help on this...

  Please post your question to the Technet forums: http://social.technet.microsoft.com/Forums/en-us/categories/

• SBS 2011 - delete shadow copies directories and cannot get the backup to work

  Help, please...
  I just installed SBS 2011.
  When I saw the low disk space getting I profiled in the directory structure and noted that most of the space was taken by windows.oldxxx directories. So I deleted one.
  But it was a bad idea. Then I realized what I did and used the vssadmin console to delete shadow copies etc. and even disable the shadow and recreate them via the computer, shared management gui.

  But now, backups fail to complete... shadow copy operation failed with error Ox800423f0.
  In a bit of panic, I deleted the rest hoping he would rebuild itself... no luck.
  I don't really know what to do.

  Is there a way to start everything again.

  Please... Please, I'd really appreciate a solid direction.

  Thank you

  Hello cvcnow,

  I would suggest trying to perform a restore of the system, prior to installation of SBC 2011.  I do not know what operating system you use, but included some links for Vista and Windows 7.  If you are running Windows XP, please let us know what version and service pack.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore