scales of y XY graph with bed double (or more)

Similar Questions

• Aligning a zero position on a graph with several scales & Auto scale

  Hello!

  I hope it's a quick - but google searches and browse the forums nothing have mounted.

  I have a graph with two scales - a position and a speed (which can obviously differ from each other). I want to be able to do is to have the scale auto chart/scales - but for the 0 position to stay in the center of the chart. With 0 balance point to different places, this is the graph that is very difficult to understand at a quick glance.

  If you see the attached screenshot - the positions of two 0 are in different places.

  Is it possible to have the scale automatically, but for zero to stay in the center of the graph for the two scales?

  Many thanks in advance,

  Sam

  (As I know) you can't do this with auto scale.

  Disable the autoscale, and then manually set the interval to be symmetric compared to zero for each scale.

  Find the maximum of the absolute value of each table of marks.  Then put it away on + and - of this value.  (in the example below, I did a loose fit by multiplying by 1.1).  Since you have more than one scale of the axis, you need to browse to treat each of them at a time.  First of all, he must be told what balance Y you want to adjust, then, set the values.

  

  Another option would be to have align the zeros, but not that the scale is symmetrical around them.  You can do that too, it takes just a little more math.  I would like to know if that's what you want.

• bar graph with two scales of y

  Hello

  I have a graph with two scales different (one on the left side from 0 to 50, the other to the right of 0 to 1)

  Now I want to draw horizontal lines limit. I do this with the programately adjustment sliders.

  But I can only put the sliders that "belongs" to the first scale.

  Is there a solution?

  Thanks for any help

  Yves

  LV 8.6

  Hi Yves,

  You can assign each slider to a YScale. Simple right click on the cursor and choose the YScale. I think you can also do it programmatically.

• the exact position of the mouse click xy graph while he plotted graph with mouse events

  Hello

  IAM using Graph xy for multi locations

  IAM traced graphic with mouse movement and events using the example attached (draw the graph with mouse events)

  but in sub vi Values.vi scale there are two constants 66 and 30 when I change my plot (I also change the scales), then the mouse position and chart position (cursor) value are not well aligned, but when I change the constants mentioned above I get the alignment perfect between the cursor and the last point in the path.

  as I went to another parcel (with scalability again) the same alignment problem resurfaced.

  I need to replace these two constants with something dynamic

  Please help

  

  concerning

  Mazhar

  solution to my problem is

• How can I display only a part of the scale in the waveform graph

  This is the first time I try to use the waveform graph, since now, I used the table of waveform.
  The reason why I moved to the chart, it's that I need cursors.

  I have 2 problem

  the first: in the diagram, the graph moves when I add a new data and the scale of the x-axis stay the same size, in the right size I always saw the new data. How can I do that with waveform graph?

  Second: How do I say Labview to the day I click on the graph, I need that because when move graphic I lose the day, and to make I need to zoom out, I drag the imprecateurs.

  All this must be done programmatically. The LabVIEW graphic accepts tabular data, not only as the table and the graph doesn't have the ability to retain the previous points, like the story of a graph. You will need to retain previous values and then continually update the graph with the old and new values to get a shift register "chart as behavior. Cursors should be written programmatically re of each iteration, since you rewrite the entire graph.

• Aeromy computer has keywords with a double line under them, how can I get rid of them

  my computer has keywords with a double line under them, how can I get rid of them

  Hi Pete McDowell,.

  Glad to know that the problem is solved. Let us know if face you any problems with Windows in the future.

• How can I sync my iphone contacts with outlook 2016 6 more?

  How can I sync my iPhone contacts with outlook 2016 6 more?

  Hello Ronusmc,

  I understand that you want to synchronize your contacts with Outlook 2016. It's something I can help you with.

  If you are wanting to use traditional synchronization, then I would start by using the first link below. It will guide you through connecting your iPhone to your computer and looking at the different content tabs sync back. For your more precisely, you can the Info tab because this is where the contact synchronization options.

  Sync your iPhone, iPad or iPod touch with iTunes via USB
  https://support.Apple.com/en-us/HT201253

  If you use iCloud, then you want to get the iCloud for Windows app. This will set up your sync for you without having to actually plug your iPhone to your computer. Take a look at the article following if you do not want to do.

  Download iCloud for Windows
  https://support.Apple.com/en-us/HT204283

  Take care

• I can't create a new folder when I'm working with filing documents or more.

  I can't create a new folder when I'm working with filing documents or more.  When I click on the "new folder" button at the top, it does absolutely nothing.  What's wrong?

  Original title: windows Explorer

  See the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a
   
  
  Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.
   
   
   
   
   
   
   
   

• I worked with a license for more than a year and a half. It should expire in October 2016 but my cc told me all of a sudden I do not have a license and my trial is over. How can I fix it

  I worked with a license for more than a year and a half. It should expire in October 2016 but my cc told me all of a sudden I do not have a license and my trial is over. How can I fix it

  Hello

  Your Forum ID associated email address shows no subscription associated with it. Make sure you use the right email address to connect to cc.

  You can also have a look at the following links for that matter.

  Stop Creative Cloud 2015 to return to the mode of trial

  The activation and deactivation of Adobe problems

  Adobe Creative products Cloud launch mode test on non-English operating systems

• I tried a trial version of lightroom 6 and edited hundreds of photots I need to find the export files are small non-printable, about 600 kbs. So I bought lightroom 6 hoping to save my changes on all the photos. However with my purchase of more than a week

  I tried a trial version of lightroom 6 and edited hundreds of photots I need to find the export files are small non-printable, about 600 kbs. So I bought lightroom 6 hoping to save my changes on all the photos. However with my purchase of more than a week, my picture exports are still about 600 kbs. Not printable! I'm signed and registered. Whats happening?

  Looks like you have been in the library module and chose with a preset export or export to email. Whatever it is, your Presets 'export' were to reduce the size of the image exported to about 600 k.

  In Lightroom, the library module and under the file menu, simply select the Word Export. Who will open another dialog box. GO through each option in this dialog box to choose where you want to export the file, what color space to use, what name to give to each folder, what metadata to include and do not forget to select the export size! I included a few screenshots for your reference.

  If you export exactly the same path several times, you can create your own export preset to make this process faster.

  

• How to create graphs with double axles

  I spent several hours trying to create a chart with two axes of value to the table. The axes have completely different values. I followed the adobes Internet guides, but it won't work. Where can I get help?

  Good looking!!!

  It works, it seems that I did one or two small mistakes all the time.

  So simple and yet so hard. Thank you, it made my day

  Concerning

  Marcus

• How to draw a graph with several axis xy enter?

  Hello

  I have problem in xy graph, the graph xy can only display 1 signal the y-axis of entry (as you can see in the attachment)

  Is it possible to draw the graph xy with 2 go? Or maybe there's another type of graph as possible to do?

  Note: the x axis must be an entry too (not compared to the time / sample).

  Answers and advice are welcome.

  Best regards

  Alvin Chandra

  You ask for a second scale of Y on the graph?

  If so, right-click on the scale of the existing, select "Double ladder". This will create a second scale. You can then (if you wish), right-click on the new scale a select 'Swap sides' to put it on the other side of the chart.

  You ask about adding a second plot?

  If Yes, then you must group your arrays of X and Y points in clusters and build those in a table:

  

  The x-axis is always an entry on the XY graph. You just need to change the title of the axis. Way easier to do is to double-click the axis title and type the new name.

  Rob

• Change the graph with nodes of property

  I've been struggling with this problem for a while now. I have a graph of simple waveform I want to set the horizontal scale to and then make a .png to file. The vi is attached. This vi is up to a lot more great vi. Does not work when I run the first level vi of the adjustment of the horizontal scale. The .png file I receive shows the unadjusted graph. However, if I open this vi and then run the first level vi it works - the graph shows the .png file scale properly. Also, if I just run this vi se it works correctly.

  I'm guessing there is a timing issue and the .png file is created before the scaling takes place, but I don't see how.

  Does anyone have any ideas as to why the scale does not if the vi is not open, when it is executed?

  If the front of the VI is not open, the nodes property can do nothing because they run in the UI thread.  This is consistent with the behavior you report with it works when the VI is open.

  Can you try to open the façade but putting off the screen (if the user does not see it) and then set the properties of the graph?

  Lynn

• overlap of XY graph with xscale property

  Hello

  I have a problem using the xscale maximum and minimum property... when I use the nodes property that it straddles two sets of curves in the same graph: one with the scale I put and the other as if I haven´t the value of the xscale assets... What I've done wrong? I Don t have a picture of what I m to describe because I can´t manage to get a screenshot with the two graphs are overlapped... = S... I hope you can help me... What can I do to remove the graph that doesn´t have a scale...? Thanks for your replies...!

  ... Lara Mia...

  Looks like you have several plots.  Check the property pages of the graph and see if all the plots are set to use the scales that you change.  If you have several scales and you want to change all then them you can use the active scale field, the scale property.

• So, most of the time Thunderbird opens only incoming messages with a double click in a new window, which I find infuriating is there a workaround or a fix for this solution?

  At the start of Thunderbird, it opens the mail entering the lower panel with one click. But after an hour or two that no longer works and I have to double-click to open the message that is sent in a new window.

  Looks like a bad add-on for me. Now restart the SHIFT key and see if the issue arises again.