Scaling button

Similar Questions

• custom scaling button problem

  Hi, I'm trying to customize some controls, but I have a problem with the construction of a button. I replaced the central image by a more realistic appearance and now I want to change the scale to better understand my button again, but I can't put across the 'ladder' after I want to be able to better run the needle and I can't choose the position of the needle. I am attaching the file so you can view and maybe help me to make this more comfortable button thank you!

  to customize your Ctrl button, click on the 'key' to display the icon.then of "clips" you can do what you want with the image or the button of properties, including the streching the balance to make pivot 360 degs, maximum range, no ticks, ticks, etc... BTW, reorganize tab is practical by placing objects to the front or the rear of several images

  

• HP Officejet 7500 a: print on A3

  I'm trying to print a word document with text with images and text area. It is in a text box so printing can be mirrored to print on iron on transfer paper. (tried to change the types of paper)  It won't let me print A3 size on A3 just spits out paper again.  It however let me print and A4 size text box on and sheet A3.  Can't work out why this is happening and how to fix

  Hello

  I tried unchecking the scaling button and I CAN PRINT on A3 in the word original and trial size box.  Thank you so much I would have never known about the scale or who worked in 1 million years.

  Helen

  HelenHowe88 wrote:

  I'm trying to print a word document with text with images and text area. It is in a text box so printing can be mirrored to print on iron on transfer paper. (tried to change the types of paper)  It won't let me print A3 size on A3 just spits out paper again.  It however let me print and A4 size text box on and sheet A3.  Can't work out why this is happening and how to fix

• How do you apply scale 9-slice scaling to a button leave this does ' t have it yet?

  In FW CS4 I apply 9-slice scaling to my button, without having to recreate again from around the world.  Is this possible?

  Good news! Open the document library panel. Select the symbol. The scale-9 guides cut, choose options panel (top right panel). Double-click the symbol in the control panel and your 9-slice guides are visible. Adjust as required. Make sure to set your text for text alignment in each State to be centered and ensure that your guides do not overlap the text block.  HTH

• I El Capitan 10.11.3 now iTunes is stuck in the mode button after clicking green full page

  OS X El Capitan 10.11.3 version

  MacBook Pro (15-inch, mid 2009)
  Processor clocked at 2.66 GHz Intel Core 2 Duo

  4 GB 1067 MHz DDR3 memory

  NVIDIA GeForce 9400 M 256 MB graphics card

  Clicking on the green button in iTunes.  Window has expanded to full size which is larger than my screen.  Even now don't see NOT the buttons at the top left click on them.  Can not access lower right window to reduce it to a smaller size.
  Pressing 'ESC' does nothing.  Only way is to hit the Q command to close the application.  When you click on it in the dock to open once again, she returned to the maximized window that is too big for the screen and does not allow for any changes to its size!

  Tried the suggestion to change the screen of scaling by default and 1440 x 900, which is the usual setting for the other parameters; tried all possible settings, still the same problem!  No change.

  I would go back to a 'normal' sized window that can be moved around on the screen, made more big and smaller etc. Cannot.

  Try control-command-f, which should turn to full-screen power

• Tecra A2 ACPI question - systems of scaling of the CPU do not work

  Hi *.

  I have Toshiba Tecra A2. It works very well for a year and a half, but now I have some problems. Apparently in ACPI problem. I use SuSE Linux (10.1), but I also have Windows XP Pro on this machine. In both CPU scaling systems do not work.

  Also, when I try to reboot both systems can stop, but then (I thing that it is the BIOS time) just shut down. I can only hold the power button for 5 seconds and material poweroff. I update the bios to version 1.4, set default values, but noting help.

  Any idea? And not only that, is possible to ask Toshiba support center any problem by mail or telephone?

  Thank you
  Branimir Ackovic

  Hi Branimir

  I'm don't know if someone will help you because Linux is not supported for operating system. Your device has two operating systems and also start Manager and there is no standard situation after discount and supported OS is there without any other substance.

  On this path, it is not easy to make a serious diagnosis, but you can try to contact the hotline of Toshiba. Please see the official page of Toshiba Europe under http://eu.computers.toshiba-europe.com

  I put t know in which country you live, but you can also try to contact authorized partner. Addresses you will find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

  Good luck!

• Help the evolution of the scaling of a virtual channel?

  Can anyone help me please with this block of code that I have?  I don't understand why on the first run it works fine without error exception daq, but on the second run, I get an error.

  More detailed, I create a virual channel in a Sub with a button click event.  This virtual channel is set to the default values (MIN = - 10, MAX = + 10, linear scale with scale and Offset 1 and 0 respectively).

  The click event, is where I'm having difficulties in the other slot.  In this Sub I am creating custom scales and assigning values to them, setting the MIN and MAX values of the virtual channel on the same minimum and maximum values of the custom scale being used and assigning custom for the channel finally this new scale virtual to use.  The code works for the first run.  When I change the scale and then run the code again to a second iteration, I get an Exception of daq error.

  Its seems that the MIN and MAX are ready on the second run, but the scaling is not reset to the new scale of values.  Can someone check and if so, what is wrong and must be changed in my code?

  First execution of the click event of the 'Download' button to assign the custom scale with its values to the virtual chanel... works very well.

  

  Change the scaling, in the case of 400 to 600 and then run the same code with the 'Download' button click event and I get the daqException error

  

  myTask.Control (TaskAction.Stop)
  
  PreScaledVals.TrimExcess (): PreScaledValsArray = PreScaledVals.ToArray
  
          ScaledVals.TrimExcess (): ScaledValsArray = ScaledVals.ToArray
  If chkBoxTblScale.Checked = True Then
  
              Try
  
                  min = ScaledValsArray.First
  
                  Max = ScaledValsArray.Last
  
              Catch ex As Exception
  
                  MessageBox.Show (ex.) Message & ""  scale of table must contain at least two values prééchelonnés and two nationally. ")"
  
                  Return
  
              End Try
  
          Else if chkBoxLinScale.Checked = True Then
  
              min = numEdtMIN.Value
  
              Max = numEdtMAX.Value
  
          Else if chkBoxMapScale.Checked = True Then
  
              min = numEdtSMin.Value
  
              Max = numEdtSMax.Value
  
          End If
  LinScale = New DAQmx.LinearScale("Linear Scale", scale, offset)
  
          RMPScale = New DAQmx.RangeMapScale("Ranged Map Scale", prescaledMin, prescaledMax, scaledMin, scaledMax)
  If chkBoxTblScale.Checked = True Then
  
              Try
  
                  TblScale = New DAQmx.TableScale ("Table scale", PreScaledValsArray, ScaledValsArray)
  
              Catch ex As DaqException
  
                  MessageBox.Show (ex.) Message)
  
              End Try
  
          End If
  
          Try
  
              If cboBoxChannels.Text = "6" then
  
                  ChannelSelected = 6
  
              Else if cboBoxChannels.Text = "7" Then
  
                  ChannelSelected = 7
  
              Else if cboBoxChannels.Text = '8' then
  
                  ChannelSelected = 8
  
              Else if cboBoxChannels.Text = '9' then
  
                  ChannelSelected = 9
  
              Else if cboBoxChannels.Text = "10" Then
  
                  ChannelSelected = 10
  
              Else if cboBoxChannels.Text = "11" Then
  
                  ChannelSelected = 11
  
              Else if cboBoxChannels.Text = "12" Then
  
                  ChannelSelected = 12
  
              Else if cboBoxChannels.Text = '13' and then
  
                  ChannelSelected = 13
  
              Else if cboBoxChannels.Text = "14" Then
  
                  ChannelSelected = 14
  
              Other: ChannelSelected = 15
  
              End If
  Select the ChannelSelected box
  
                  Box of 6
  
                      myTask.AIChannels (lblCh6Wfg.Text). Minimum = min
  
                      myTask.AIChannels (lblCh6Wfg.Text). Maximum = max
  
                      If chkBoxLinScale.Checked = True Then
  
                          myTask.AIChannels (lblCh6Wfg.Text). CustomScaleName = "linear scale".

  
  Else if chkBoxTblScale.Checked = True Then
  myTask.AIChannels (lblCh6Wfg.Text). CustomScaleName = "Table of scale".
  Else if chkBoxMapScale.Checked = True Then
  myTask.AIChannels (lblCh6Wfg.Text). CustomScaleName = "stood at the map scale.
  End If

  TblScale = Nothing
  RMPScale = Nothing
  LinScale = Nothing

  Thank you

  Look at what you are doing with the New .

  If the object does not exist then prompts you to create it, but when it is created, you must be change it.

• Need to change the scale to the default scale my resolution, but the ok button is not visible

  Original title: DPI scaling

  Need to change the scale to the default scale my resolution, but the ok button is not visible

  This help,

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/want-to-return-DPI-scaling-to-original-96-DPI-but/bd160079-c1e1-47F8-9727-2bc22892dfe0

• HP 7510 Duplex problem, scaling of axis of ordinates?

  I read about the problem with additional/updated margins across the vertical duplex enabled on HP OfficeJet 6500.

  I also found this question in a review of HP Photosmart 7510 [ http://www.trustedreviews.com/hp-photosmart-7510_Printer_review_performance-and-verdict_Page-2#tr-re... ].

  > When printing duplex, the machine seems to use different inks for front

  > and back faces of the pages and to automatically reduce the size of the images on the page.

  > but not by as much as make heroes of Kodak. We can understand this duplex

  > motor may need large margins, but still feel the driver software should let you know.

  (1) is it by chance the same problem with "crushed" pages (to scale vertically) as in HP 6500?

  (2) what are the minimum margin of top & bottom when printing in duplex mode on HP Photosmart 7510?

  ===============================================================

  More information:

  Several other users have confirmed the problem in discussions: http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/Officejet-6500A-PLUS-Duplex-scaling-iss..., http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/6500A-Plus-AiO-Duplex-Issue-Margins-Off..., http://h30434.www3.hp.com/t5/Other-Printing-Questions/HP-6500A-Adds-extra-1-2-quot-margin-to-top-amp...

  There are also two possible solutions:

  (1) remove the extra HP software [from: http://h30434.www3.hp.com/t5/Other-Printing-Questions/HP-6500A-Adds-extra-1-2-quot-margin-to-top-amp... ]

  ---------------------------------------------------------------------------------------

  It was utilities HP Print clean which was causing the problem!

  I remembered occuring problem started when I installed the hp (HP monitor) utilities, in order to use network scanning. Before that, I only installed the drivers.

  Delete all HP bloatware and you should be able to print correctly.

  ---------------------------------------------------------------------------------------

  (2) use the other driver [from: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officejet-6500A-PLUS-Duplex-Fix/td-p/6... ]

  ---------------------------------------------------------------------------------------

  Hello world

  I thought I would post this for others who have experienced the same problem I have with the default drivers for a 6500 Officjet MORE where what print in duplex mode, the topic on the axis there appear shriveled.

  The fix was given by a person to the HP Technical Support...

  First turn off you will want the printer already available on the computer before you continue.

  1. Go to Start -online device and printers -online, then click on the "Add a printer" button in the upper left corner of the device window.
  2. Click on the button "Add a local printer" (choose this option if you do not your configuration)
  3. Check the box "use an existing port.
  4. On the drop-down list, select the option "CN115130TP05JW(not the fax one) . 
  5. Now in the list manufacturing to the left, select "HP".
  6. The printer the right list, select "HP Deskjet 6980 series (HP)" "
  7. "Once the pilot moved to enter in the" 'devices and printers ' window and right-click the newly added "HP Deskjet 6980 series ' and select" "printer properties ' on the drop-down list."
  8. In the HP Deskjet 6980 Properties window, click the 'device settings' tab at the top of the window.
  9. In the list of parameters, search for "Unit duplex (for printing on 2 sides) ' and select it.
  10. Once highlighted, select in the drop-down list ""Installed "; "
  11. When finished press apply
  12. Now go to what you use to print documents and then select the "HP Deskjet 6980" as your printer. Activate duplex printing and you should see the pages to print correctly.

  Hope this helps someone who had the same problem as me.

  ---------------------------------------------------------------------------------------

  In my time working with printers to this problem, I came across a viable solution.  The key is to use a different printer driver to print, but to make sure that you use the right one.  The document that I have a link in my previous post was ment to point people towards a simple solution, but that doesn't seem to work.  I tried another way of attribution of other print drivers and other drivers that may work better.  I found that the 990c Deskjet and Deskjet 450 driver work as a generic driver for most printers and retain most of the key features.  These drivers allow the copy double-sided without distortion.  I'll link to a post I did with the new instuctions below.  I'm sorry that I don't come back to update this post as soon as possible.

  How to assign other print in different Versions of Windows drivers.

• Scaling of issues related to the HTML5 application tests the Ripple

  I'm doing my first application on WebWorks. I use ripple emulator to test. I'm just a simple doubt if I should scale is to say increase the size of the different HTML elements (such as buttons and text) or not, so that they are visible on the screen of a phone.

  I recommend using the BB10 Simulator (or ideally dev alpha) to test the scaling problems.

  Ripple frankly STINKS to test (not to mention than just general tests / making of course the app works at all). What looks good in waving may end up weird on a device real - or at least less than you expect.

• Buttons with images, by setting the size?

  Hello

  I use the following code to add images to the buttons. However, I got some of the buttons out of the view from the window! What can I add to make them fit on the display window?

  MORE: I want them to be on the Center vertically and horizontally. Let's say I have 15 buttons, I want 3 each line. And in the center of the screen?

  And finally, is it possible to make the button selected by default as NULL? Then, key 1 is not selected at the beginning as shown in the picture as an attachment!

  * Image attached *.

  Thanks in advance

  Code:

  public class BitmapButtonField extends ButtonField {
          private Bitmap bitmap;
          private Bitmap bitmapHighlight;
          private boolean highlighted = false;
  
          public BitmapButtonField(Bitmap bitmap, Bitmap bitmapHighlight) {
              this(bitmap, bitmapHighlight, ButtonField.CONSUME_CLICK|ButtonField.FIELD_HCENTER|ButtonField.FIELD_VCENTER);
          }
  
          public BitmapButtonField(Bitmap bitmap, Bitmap bitmapHighlight, long style) {
              super(style);
              this.bitmap = bitmap;
              this.bitmapHighlight = bitmapHighlight;
          }
  
          protected void layout(int width, int height) {
                  setExtent(getPreferredWidth(), getPreferredHeight());
          }
  
          public int getPreferredWidth() {
                  return bitmap.getWidth();
          }
  
          public int getPreferredHeight() {
                  return bitmap.getHeight();
          }
  
          protected void paint(Graphics graphics) {
                  super.paint(graphics);
                  int width = bitmap.getWidth();
                  int height = bitmap.getHeight();
                  Bitmap b = bitmap;
                  if (highlighted)
                      b = bitmapHighlight;
                  graphics.drawBitmap(0, 0, width, height, b, 0, 0);
          }
  }
  

  SOLVED

  I solved by:

  1 - scaling images with display:

          public int getPreferredWidth() {
                  return Display.getWidth()/6;
          }
  
          public int getPreferredHeight() {
                  return Display.getHeight()/6;
          }
  

  2 - using HorizontalFieldManager:

  HorizontalFieldManager(FIELD_HCENTER);
  

  Thank you

• Scaling vertically by the Expression, please help ASAP!

  Hello, everyone! I had a bit of trouble within the last few days, and I searched almost every corner of the web trying to figure out how to write this expression. So I had two expressions. We were too complicated and not a new does exactly what I want. So first, here's my first expression

  X = 100

  Y = thisComp.layer("Soundkeys_1").effect ("sound keys") ("Output 1") * 1.33333;

  "CB = (CheckBox Control") effect ("Checkbox");

  If (cb.numKeys > 0) {}

  t = cb.key (1) .time;

  Y = linear(time,t,t+1,Y,.5);

  Note: this is a single bar of 63
  This was given to me by another Member on this forum about 6 or 7 months ago. What this did is whenever that time I had a key image of the box I get the bar down slowly during the second at the end of the song. The problem with the term is that it does not allow me to do the bars Ascend slowly upward more than a second (the opposite of what it).

  So my solution so far has been to use an expression that allows me to have less soundkeys layers for solids (have not really learned to test it so if you could tell me if it works or not which would be awesome) here is the second (new) expression, but the expression does not include the scaling upward or down scale.

  X = 100

  Temp = thisComp.layer("1-3").effect ("sound keys") ("Output 1") * 1.33333;

  Temp2 = thisComp.layer("1-3").effect ("sound keys") ("output 2") * 1.33333;

  Temp3 = (temp1 and temp2) / 2

  Y = [100, temp3]

  }

  [X, Y]

  Once again: it's just a bar of 63

  What are average effects soundkeys instead of having so many different ranges (not important). What I am wanting to add is to add to this expression with a slider effect, or 2 box keyframes, just something like it takes do you present in several layers at once (while keeping my current expression) [so probably using an adjustment layer]:

  

  But of course scaling upward at the beginning of the song and scaled down at the end of the song, each period of 1 second. Sorry for such a long post, but I really wish I could get there as soon as POSSIBLE for my promotional music channel . Thank you!

  PS: The only reason I'm writing is because I couldn't find anywhere, and the only thing that I thought were too advanced for me to understand, but what I didn't understand is that they used a slider effect to control the whole of the value of Y of the layers with keyframes. Hope that the additional information could be useful

  Hello again everyone. So my friend and I were finally able to come with two expressions that I needed to make it work! Basically what I had to do was to create a null with effect of cursor object and add pictures 4 keys (2 at the beginning) and 2 at the end where I wanted them. We hung out and then each bar for the layer of sound keys appropriate as well as the slider layer. These are two expressions that we could get to

  For a single bar that wasn't going to be an average, we used this expression:

  temp = thisComp.layer("1-3").effect("Sound Keys")("Output 1")*(4/3);temp = temp*thisComp.layer("Spectrum Scale").effect("Slider Control")("Slider");temp = linear(temp, 0, 100*(4/3), .5, 100*(4/3));[100, temp]
  

  This adds a variety of things to temp.

  1. in the first line, we have 'temp' on the expression of basic whipped pick multiplied by 4/3.

  2. in the second line, we have pick whipped for the layer time zero that we named "Slider Scale" and the effect being "Cursor" with the variable (keyframes) on "Slider".

  3. the third line is a little more complicated because we needed to have had a minimum of.5 without adding +.5 at the end of the last line. This created a problem because this would produce no output, even when we didn't she added, a.5 more that it should be. So we decided to add a minimum expression to the minimum.5 power and the maximum output identical to the first line "(4/3)". "

  For the bars, on average, it needed a little more coding and much more advanced work (in my opinion). This is the expression:

  temp1 = thisComp.layer("1-3").effect("Sound Keys")("Output 1")*(4/3);temp2 = thisComp.layer("1-3").effect("Sound Keys")("Output 2")*(4/3);temp = (temp1+temp2)/2;temp = temp*thisComp.layer("Spectrum Scale").effect("Slider Control")("Slider");temp = linear(temp, 0, 100*(4/3), .5, 100*(4/3));
  

  So, is a lot heftier of an expression at first glance, but really, it's basically the same thing.

  1. put off tension in the first line, we have him while temp1 is the first release used in sound tones multiplied by 4/3.

  2. in the second line, we have exactly the same thing that the first line only, we used the second exit in the sound buttons layer.

  3. the third line is where we started having to change everything. previously, he was referred to as "temp3" but we couldn't use it with what we wanted to do. So what we ended up doing was to change all the references 'temp3"just"Temp ". Then we did the same thing as we did in the first expression choose it whipping out of the slider control.

  4. in the fourth line, that's where we had to implement a different minimum and maximum so that the bars do not disappear when the audio reaches a point 0 or keyframes, we put in the slider were set as 0. So, we made minimum.5 flow and the 100 *(4/3) of maximum output using the expression "linear '.

  Due to the extensive knowledge of my friend in these types of templates and javascript, it only takes about 30 minutes to fix the problem. It does exactly what I wanted to do in my original post, and I am very grateful to have a friend who can help out me like that. I want to thank each of you in the community forum to help people at all times with the expressions, even if they are extremely simple. Help you a lot of people who simply can not find the answer they're looking for. I'll show you what I did with key images in the slider effect now

  

  2 last keyframes are exactly the same values but in the opposite direction. The end result is completely what I wanted (as shown in the OP) so if anyone wants to know how to intensify the multiple layers at the beginning and then downwards at the end please send them this. Thanks again to the community, as much respect!

• Using dynamic forms - windows, buttons...

  Hi, I would like to ask whether it is possible to create forms with dynamic parts such as the arrow up and down at the end of this text on the picture box. I want to have is a shape layer in this text box that, once I resize, the arrows the end of it will stay the same size.

  More examples would be a dialog box with buttons "Close" and "reduce" with fixed position in the upper right corner or a speech bubble with the "legs". Something more advanced that it would be to place text inside, as the title of a window with a position fixed in the upper middle part of the object.

  Thanks for your help and your ideas

  

  Wrong tool. These things is usually done in Illustrator using 9-slice scaling, appropriate grouping, symbols and other tricks. Even in this case there are limits. What you're talking about are parametric / programmatic relations, which, as its name suggests, must be programmed or wired to the top with some logic. Interface stuff custom user is usually a combination of different stages. You design the static elements and then load into your programming environment to determine the behaviour and States. Flash / animate CC would be an example...

  Mylenium

• Problem scaling of the Windows user interface

  Animation of characters (Preview 1 and 2) both have problems with the Windows display scale. On my Thinkpad running Windows 8.1 and game scaling of the display to 125%, the buttons at the bottom of the Panel of the camera and the Microphone disappeared. If the display scale is set at 150%, buttons appeared but the whole user interface is very blurred. Here are 2 screenshots. The first is when the display is 125% and the second is when the display is at 150%.

  

  Please let us know. Yes, we could not do the work in support of the various parameters on Windows in Preview 2 PPP, but we are aware of these issues and hope to address them in a future release.

• What is a completed image status button always to become a background image?

  -so lose all scaling etc... do I make the images the size of the button or do I add a picture without it somehow amplify and become a background image?

  When you use the fill for the button option, you can define the position and the fitting of the image.

  Thank you

  Sanjit