Scaling fonts does not work properly - 125% is to double the size of 100%

Similar Questions

• I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

  My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Is anyone know how can I access my hard drive again?

  Thank you

  Hello

  You has made changes to the system before the error appearing?  Cancel the changes.

  (1) in Device Manager > right click on the driver, and then select uninstall

  Reboot and Windows will reload the driver

  (2) remove the upper & lower filters that cause errors in Code 31

  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

  Access the manufacturer's Web site and search for updated driver

• This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.

  Jake

  Hey Jake,

  Follow these methods.

  Method 1: Follow these steps:

  (a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.

  (b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.

  (c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:

  Remove or reconfigure newly installed unit.

  Restore a version prior to updating the driver.

  Use system restore to undo the Device Manager recent related changes.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  (d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Update the latest graphic drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Computer does not recognize network. -This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Hello!

  I have problems connecting to my network. I stay in a House (not my own) and I can't connect to the network in this House. When I choose the option 'connect to a network', nothing happens. I followed the instructions to display the "Device Manager" and watch the 'map', and he said:

  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  When I click on this button, nothing happens... Should I simply wait for Microsoft to return to me - or is there something else I need to do?

  Thank you!

  Hello

  You must get the drivers latset for m computer support site.

  Delete the "false: entry in Device Manager and install the new drivers."

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Error: This device does not work properly because Windows cannot load the...

  I get this error message "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) "via a wired connection. And that's the Microsoft 6to4 adapt #7 and the same card but the #4 one.  Are these drivers or another file that I could use DL?

  Hi JasonBedgood,

  1. Once you get the error message?
  2. did you of recent changes on the computer?

  This error occurs if the required driver is not installed or the driver is damaged.

  I suggest that you update the driver for the device and check.

  How can I update the driver for network card on the computer

  1. click on Start, click Control Panel, and then double-click System.
  2. click the tab hardware , and then click Device Manager.
  NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
  3. click on network adapters to expand.
  4. under network adapters, double-click the entry for Microsoft 6to4and then click driver .
  5. click on Update driver software.
  6. follow the Wizard update software driver to update the driver for NICs .

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the device driver update did not help then check the link below for one of the thread with the question and try the steps mentioned by Lionel Chen on January 9, 2008
  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.

  Thanx

  Hi rui2010,

   

  Place your machine in a clean boot State to see if another application is in conflict with the modem.

  If this fails, I recommend you reach out to the community Hauwei for assistance:

  http://Forum.Huawei.com/jive4/Forum.jspa?forumid=46&orderStr=9

   

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• My sistem 5.1 audio does not work properly when I connect to the internet

  Hello!

  I just bought a Genuis 5005 5.1 audio sistem and I have a problem with him: it will not work properly when I get on the internet (the center speaker does not work).

  I also bought an Asus Xonar DG 5.1 soundcard which works perfectly. I installed and also installed the driver for it.

  When I play music/videos to my hard drive, all speakers work fine, but when I enter the internet videos/Music Center speaker does not work...

  I hope someone can tell me how to solve this problem... Thank you

  Later edit: I managed to solve the problem by selecting the "2 channel" option in my sound card driver.

  I managed to make it work with my audio driver 2-channel. Thank you for your time :)

• Microsoft ISOTAP #14 adapter this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  can someone help me please, I need to fix this as its making the computer

  Hello

  Control Panel - devices - right click on - UNINSTALL - REBOOT Manager

  Nothing else to do, Windows will do the rest. And you can ignore the error if you wish and on some
  computers, it will always be there but no problem to be expected.

  On a Windows Vista-based computer or on a computer, Windows Server 2008, the card Microsoft ISATAP
  appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/kb/932520

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Action written in CS4 does not work properly in items 11 - contexts the 'selective' layer

  I created an action with the help of Adobe Photoshop CS4, and that it works in CS4.  When I save and load the action in 11 elements, there is a problem with the selective color layer.  The selective color layer is revealed in the stack of layers with the message whereas it cannot be edited b/c it was created in the full version of Photoshop. However, the layer itself has no changes in color/inside.

  In Photoshop, the selective color layer makes the photo look pink.  When I run the action in Elements11, selective color layer doing absolutely nothing to the photo.  I don't have the turned eye "on" to display the layer, and it is on the correct merge options & opacity (normal, 100%).

  If I run the action in Photoshop, save the file with all the layers created by the action and reopen the file in 11 elements, THEN the selective color layer shows its correct pink color.  But when I run the action as an autonomous action in Elements11, is not.

  Can anyone offer help as to why this is happening? Is there something special I need to do to make the action work in 11 elements? My understanding is that he must RUN and create the layers correctly, although some of them cannot be changed in Elements11. However, as it is, is not creating them with the appropriate color.

  Thank you in advance for your help!

  selective color layer is not supported in PSE11. So any stage to edit would result in the error message saying that the layer can not be displayed.

  For your case, I believe that the recorded action starts by creating a selective correction blank adjustment layer and then tries to change and thus translates into a mistake.

  

  Even the effort to apply the effect by using result of adjustments of image by mistake as the "selective" command is not available.

  I would try to find another way to apply the effect, but I don't know if there is a way to apply an adjustment layer that is not supported by PES

• This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) my video card does not work why?

  can u help me quickly?

  Hello

  -For how long have you had the problem?
  -Did you change your computer, after which the question began?

  I suggest that you uninstall and reinstall the drivers for video card and check if that helps.

  Uninstall or reinstall a device

  Note: Not applicable for Windows Vista also.

• Satellite Pro M10 - infrared does not work properly

  Hello

  I have a Satellite Pro M10 and my infrared does not work. I downloaded the zip file with the drivers from this site. Then, I uninstalled and reinstalled, but it always happens in the Device Manager under "unknown - SMC IrCC - Fast Port infrared (IR Module: HP). (with an exclamation point). When I look at the properties it says under device status:

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click Troubleshoot to start the troubleshooter for this device.

  However, under Driver Details is said:
  C:\windows\system32\DRIVERS\smcirda.sys

  I extracted the zip file in my home directory of c:\downloads\infrared.
  whatever I do, it does not now. It worked when I bought it, but I have too many things on the system for a new installation. Which brings me to another question. Is it possible to re - install windows without losing all your data, etc.? I did it with other systems (95,98) Windows. But it seems that the Toshiba recovery disc means any wiping.

  Thanks in advance for any help.
  Chris

  Hello

  If your HARD disk contains two partitions and you have saved the data on a second you can reinstall the operating system on the first partition using recovery DVDs.

• Mat * one years (uj-840) DVD player does not work properly

  The Mat * one years (uj-840) DVD player does not work properly.
  A symptom of the problem is that the icon does not appear in 'my computer '.
  more and she does not recognize the CD.

  I went to the properties of the drive through Device Manager and saw the following message is displayed:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
  Click Troubleshoot to start the troubleshooter for this device. »

  Following the instruction of the troubleshooter, I tried to update my driver through
  Device Manager, but it tells me that the current driver is the more up-to-date version.
  In the properties of the drive, I found that my driver version is: 5.1.2535.0

  What is a simple problem that has a solution?
  I don't see other actions to find the root of the problem.

  Thank you

  I hope this article can help you - http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm
  Check it out!

• Keyboard does not work properly

  Hello

  I had trouble getting my laptop satellite to initialize. Recovery disks & pressing F keys weren't working so I decided to open the laptop to see if there are any loose connections. To my surprise, the laptop seems to work again once I had the USB keys and put back them in! Unfortunately, before that I did, I opened the keyboard and peeked inside.

  When I booted up and tried to use the keyboard keys half of their work and the other half seem to think that they represent two other keys for example if I type the letter 'E' I get '3' and '-' as a whole. After 5-10 minutes the entire keyboard will become totally unresponsive until I restart again. Of course, I think I've done something here because this problem since I opened the bottom of the keyboard. This could be a hardware failure I have caused or is anyway that this issue can be resolved without replacing anything?

  Thank you very much

  Tom

  Hi Tom

  Theoretically, it might be just a connection lost between the keyboard and the motherboard, but I'm afraid, it can be a serious problem of m.
  Maybe you have damaged the connector of the keyboard cable or something similar, and not the keyboard does not work properly.

  I think the keyboard needs to be replaced to check if only this part is affected

• Satellite L670 - after Win 8 upgrade WIFI does not work properly

  Afteer upgrade to Win 8, the WiFi of my Satellite L670-128 has stopped working properly.

  The connection only works some time, usually only a few seconds before the connection is lost.
  After a few seconds or minutes the connection is restored, just soon to be lost again.

  Cannot download large files or even to see larger photos on normal web pages. Is there any Win8 driver for Broadcom coming 802.11n network card, or should I throw one 2.5 year old computer in the trash?

  Buy a usb-wlan card is not an option, as wireless mice is already "permanently" reserving one of the three usb ports and wlan card it would be just to the left...

  To my knowledge this L670 series isn t Win 8 taken in charge and this means that there is no special Win 8 drivers for this device, so I put t think you will find an another Win 8 driver for this WLan card.

  But do you really want to throw this laptop in the trash just because the wifi does not work properly running Win 8?
  The device was working properly under Win 7?

  I would recommend running a few Wlan test.
  For example; Disable wireless encryption on your router and Wifi connectivity with the open network do that just for testing purposes, perhaps you will need to change the type of encryption to test.

• Carpet * a DVD - RAM in Sat M55-325 drive does not work properly

  The Mat * one years (uj-840) DVD player does not work properly.
  A symptom of the problem is that the icon does not appear in 'my computer '.
  more and she does not recognize the CD.

  I went to the properties of the drive through Device Manager and saw the following message is displayed:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
  Click Troubleshoot to start the troubleshooter for this device. »

  Following the instruction of the troubleshooter, I tried to update my driver through
  Device Manager, but it tells me that the current driver is the more up-to-date version.
  In the properties of the drive, I found that my driver version is: 5.1.2535.0
  I have RecordNow from Sonic/Roxio which is preinstalled on the computer.

  What is a simple problem that has a solution?
  I don't see other actions to find the root of the problem.

  Thank you

  Hello

  Check it please this page http://support.microsoft.com/default.aspx?scid=kb;en-us;320553 Microsoft

  I had similar problem. The ODD (optical disc drive) did not appear in Windows Explorer. Method 1 from this page solved the problem. Please try the same thing and let me know if ODD working again.