scan color with M127

Similar Questions

• How to scan color PDF with Photosmart 6520

  How to scan color PDF with the Photosmart 6520? They only appear on my Mac in black and white and I don't see any option to specify the color on the device.

  Hello
  The workflow default scanning set up to scan documents in black and white. Be sure to change the settings for scanning to scan color documents:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab scan tasks.
  4. Select the affected shortcut and click on change... (or double-click on the shortcut).
  5. in the section of scanning from an HP device, click the blue triangle or button view details to expand the menu.
  6. in the expanded menu now, open the drop-down next to the Mode
  7. now select the color option, and then click OK to save the changes. The next scanned using this workflow is displayed in color.

  Kind regards
  Shlomi

• scanning color photos come out blank and blach k

  My scanner is an all-in-one photosmart 5520 and when I scan color photo they come out black and white.

  I am a pensioner and not very computer but think it must be something to do with settings, can someone please help. Thanks a lot Shirley01

  You must have somehow set it or choose a mode that is black and white only. How do you scan? Computer or printer with the ' scan to '? If from the computer, which is the type selected? If the printer are you scan a document or photo, pdf, pdf seachable etc? If of course, change the setting and see if the colors come out?

• How to scan documents with my hp officejet pro 8600

  could someone tell me please how to scan documents with my hp officejet pro 8600?  Thank you.

  I understand that you want to analyze. I'd take a glance at this document.
  
  Let me know if it helps.

• HP deskjet 5650 color with the IMac use

  Hope you can help - tried to install the new driver to activate my printer to print in color when it is connected to the new Imac.  Operating system is OS X Maverick and is not in the drop-down options on the HP website.  My printer is really too old to be compatible (printed in color) with my imac?  It prints fine in black and white, but just not in full colour.  Have checked the settings and connected a laptop to the same printer and print in color perfectly fine... Tried to download driver OS X but it downloaded then could not open with error message on screen: cannot open the OS X HP Inkjet Installer application because the Power PC applications are no longer supported.

  Any ideas to help me please?  Thank you very much...

  Hi BBHRJane,

  Apple offers third-party software for scanners and printers by using the software update. To set up your printer or scanner, just connect it to your Mac. If the software is needed and available, OS X automatically downloads and installs.

  This article is a comprehensive list of the models currently supported for printer and scanner and associated software provided by third-party vendors as of November 14, 2013. OS X: printer and scanner software available for download.

  The Deskjet 5650 isn't on the list. Although I prefer not to be the bearer of bad news, the fact of the matter is, the Deskjet 5650 does not have a compatible driver to work with 10.9.

  On a positive note, you could call HP. HP may be able to offer a more recent model, which is compatible for a cost reduced. The number to call HP is 1-800-474-6836 for the Canada and US or you can Contact HP worldwide.< click="" here="" and="" select="" your="">

• Scanning color photos, but get out of black and white

  I am new to scanning - I'm scanning color photo, but it's scanning in black & white.  How it scan in color?

  original title: digitization of color photos

  The following articles might offer something useful:

  Windows Vista - Windows Photo Gallery - scan a picture
  http://Windows.Microsoft.com/en-us/Windows-Vista/scan-a-picture

  Windows Vista - scanning: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/scanning-frequently-asked-questions

  Scanning in Windows Vista by using Windows Photo Gallery
  http://hpanswers.blogspot.com/2008/07/scanning-in-Windows-Vista-using-Windows.html

  Windows Live Photo Gallery - acquire Photos from a Scanner
  http://www.digitalmediausers.com/tabid/63/default.aspx

  How to scan Photos in Windows Live Photo Gallery
  http://www.Dummies.com/how-to/content/how-to-scan-photos-in-Windows-Live-Photo-Gallery.html

• Can't print or scan documents with Canon MG2470 printer (2400 series)

  Original title: install a driver for the Canon 2400 series printer

  Hello

  I am currently not able to print or scan documents with my Canon MG2470 printer (2400 series), that worked perfectly until a few days ago.

  I tried to reinstall the software of the printer, including the driver, but the latter does not settle.  The control panel displays a yellow triangle with an exclamation mark against the Canon 2400 printer, but when I "fix" the problem, it remains unresolved.  Accordingly, my 'Cute pdf writer' is set as the default printer that is not of much use.

  Regarding documents scanning with the same printer, I now get the error code 5156.69 to come, but I don't seem to be able to solve this problem either.

  Any help on this issue would be appreciated.

  Norman

  Hi Norman,

  This problem can occur because of corrupt drivers, incompatible drivers, due to the printer settings, missing updates, and problems with the printer.

  Please follow the steps mentioned in the following link:

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I also suggest you try to install the latest version of the printer driver and software from the printer manufacturer website. Consult the following link:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg2420#DriversAndSoftware

  Please answer us on the State of the question you tio assist also.

• OSX 10.8.5 unable to print colors with HP photosmart 1115

  I used to be able to print in color with this laptop computer/computer combo, but after upgrading to OS 10.8.5, there is no option for color printing.  Help, please!

  Hello

  Photosmart 1115 is not officially supported on Mac OS X since version 10.5.

  Try using some 3rd party HPIJS print drivers, those who are compatible with 10.8 and list the Photosmart 1115, sustained.

  Don't forget to install one of the prior agreement of 3 downloads required as a result of the printer, configure the instructions:

  http://www.linuxfoundation.org/collaborate/workgroups/OpenPrinting/MacOSX/HPIJS

  Good luck

  Shlomi

• How is - what cut you a rectangle in 2 colors with a diagonal from top to bottom?  Once I draw a diagonal with the online tool I am at loss to create 2 color split?

  How is - what cut you a rectangle in 2 colors with a diagonal from top to bottom?  Once I draw a diagonal with the online tool I am at loss to create 2 color split?

  Rosemary,

  A simple way would be to:

  (1) give the rectangle a color, then Ctrl > Cmd + C + F;

  (2) use the direct Selection tool, and then deselect (click and empty space), then click on the opposite corner to the part where you want to keep the color, then press DELETE, then change the fill color to the other.

  Or, you can ClickDrag with the line tool along the diagonal line from corner to corner (guides are your friends), select it all and Pathfinder > divide, then select live from the triangle where you want to change the color and change.

• Pick color with the eyedropper loads in the background color

  I'm not sure what would have caused this, but now all of a sudden, whenever I click on a color with the eyedropper tool, it loads this color in the background color instead of the sample of foreground. If I hold down the Option key and click, it loads in the sample of foreground, then the behavior is backwards. How to switch this back?

  It looks like somehow the default color sample is activated in the color Panel.

  In photoshop, go to the window > color

  Then click on the foreground swatch to make that the default.

  The default color chart always has a white or grey outside line.

  

• How to sample the color with the eyedropper tool and have it be the foreground color?

  How to sample the color with the eyedropper tool and have it be the foreground color?

  Use the keyboard shortcut to set the default foreground sample.

  The sample of foreground (top left in the screen shot) is visible and you just click on the color with the eyedropper tool to change.

  You can also use x to exchange the undertone in the foreground if you want to change that.

  

• Cannot scan Duplex with Acrobat Pro DC

  Cannot scan Duplex with Acrobat Pro DC

  Hello

  There is now a patch available, which fixes the issue of scanning duplex. Please visit: https://helpx.adobe.com/acrobat/release-note/acrobat-dc-august-06-2015.html to download and apply the patch.

  Please let us know how it goes.

  Thank you

  -ashu

• Sampling of colors with the brush by holding down the ALT key does not work

  I am train to sample a color with the brush on a layer tool empty while the paint holding the key ALT on my mac, but it does not work for me on Photoshop CC. Is there a setting I'm missing?

  Thank you

  Juliano

  Select the eyedropper tool, check in options. "All layers" is selected?

  

• How can I replace a color with a pattern fill?

  Hi everyone, thanks for all the answers in advance!

  I've created quite a detailed design that works with 4 pixels per cm and 16 colors, canvas size 120x170cm. I'm wanting to replace all one color with a pattern, is there a way to do this?

  Can I replace a color with another flat color using the settings etc. but I want to meet all of an area of color with a pattern instead. The only way I can think to do would be to use the magic wand tool to select each pixel of the same color, then create a new layer and overlay with a filling of the desired design, however the design is so detailed, it would take me a terrible long to select each color!

  Can someone suggest a faster way of efficiant more to do?

  Thank you!

  Select--> color range

  Mylenium

• How to scan a color document in PDF format (in color) with 120 envy

  I can't scan in color in PDF format with the desire of 120. I googled to are if possible and can't seem to find an answer. I chose PHOTOGRAPHY instead of DOCUMENT and types of modified file, but it doesn't seem to make a difference. I no longer get several files or a black and white version of a scanned document if I choose PDF. Is it a setting I'm missing?

  Thank you

  Hello

  Please try to (Windows) computer:

  (a) double-click the desktop printer icon.

  (b) click on scan a Document or Photo

  (c) on the right hand size, select color under output type

  Kind regards.