Scan of the Bundle chain by name

Similar Questions

• I scanned an article & he said he would be sent to the 'c:\users[user-name]\music\itunes\itunes/myscan/images/proprietaires. where is it? How do it?

  I scanned an article & he said he would be sent to the "c:\Users[user-name]\Music\iTunes\iTunes / owners? photos? MyScans ".  Where is it? How do it?

  Hello

  To do this: -.

  1. Open early
  2. Search for 'My computer' or 'C: '.
  3. Then find a folder named users and follow the command.

  If it doesn't, reply.

• Text is broken when scanning to the TOP of the page; but good scan to the bottom of the page; Why?

  Text is broken when scanning to the TOP of the page; but good scan to the bottom of the page. The text looks like a shotgun was fired through it. It has been good both ways until the last update. This isn't a problem in other programs, including Internet Explorer. I have a picture to show you, but there is no link here to attach.

  After you click Allow, I had... The add-on could not be downloaded due to an error on the support site.

  Try to create a new Boolean pref on the subject: config page via the context menu with the name layout.paint_rects_separately and set to true and leave hardware acceleration enabled.

  See the 414 comment in bug 812695:

  • https://Bugzilla.Mozilla.org/show_bug.cgi?id=812695#C414

  If this help then try to disable hardware acceleration in Firefox (you will need to close and restart Firefox).

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Scan of the computer allow

  Printer: HP Officejet 4620

  OS: Mac OS X 10.8 Mountain Lion

  I spent all last night on web chat with HP trying to get "my computer analysis" to work. I can scan from my computer fine. And printing is also very good. Just can't get it to run a scan from the printer display. It comes up with an error saying: a computer cannot be found and that I need to make sure the software is installed on my computer. We tried:

  (1) for "scan my computer" utility HP---> will not

  (2) uninstall by using HP software (while maintaining the comand, option and control) and then reinstall---> still will not

  (3) repair permissions disc---> will still not

  We spent a lot of time trying to get "scanning HP 3"install, but whenever we reinstalled the software of HP it was only "HP Scan" installed. Is it a distraction?

  Point of desperation to reach now. Any ideas?

  Thank you

  Chris

  Solved my problem. My computer had a name.

  Go to System Preferences > sharing > change computer name

• Scan of the computer cannot be activated.

  HP Photosmart Pro N911a 8600

  OS X 10.8.3

  I'm unable to scan from the printer on my Mac.  The Mac does not appear on the list of available devices ' scan to ' on the printer (although my other Windows computers do).  Enable the computer to the printer utility analysis does not work.  I get the error Scan of the computer cannot be activated ~ unable to communicate with the device.  I uninstalled and reinstalled all the software and drivers for the printer.  I have also tried to enable sharing on the Mac, but still does not work.  I can do EVERYTHING else very well including the analysis of computer to the printer.

  Hello

  Please go to System Preferences > sharing.

  Ensure that the computer name field is set and include only English characters...

  Otherwise, click on modify and change accordingly.

  Now, restart your Mac and check differences while allowing the Scan of the computer.

  If the same persists, click on the Apple icon, install any available software update and see if that can help you.

  If there is still no try to change reset the printing system, then reconfigure the device by following the HP Installation Wizard (under Applications > Hewlett-Packard > utility device) and look for any change.

  If there is still no change, remove the software by following the HP uninstaller program.

  Then go to computer Finder > Macintosh HD > library > printers and move the HP folder to the trash.

  Open the PPDs > contents > resources. You can search the 8600 folder and remove its pilots in the trash.

  Fix permissions of the drive as follows to avoid any possible permissions problem:

  Hello
  Follow the steps below to repair disk permissions:
  
  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The progress log shows when the process was completed.

  Finally, reinstall the latest version of the software below by selecting the recommended HP software:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-107214-1&cc=us&DLC=en&LC=en&OS=4142&product=4323659&sw_lang=

  Shlomi

• LasetJet Pro M475dn: Impossible to scan over the network after upgrade to El Capitan

  After that I upgraded to El Capitan I no longer use HP Scan or HP Easy Scan to scan the network more. I can print to the printer, but analysis always results in the page being pulled by the document feeder, but applications just to lock-up without the document showing. Everything worked fine on Yosemite.

  I found a workaround solution that once worked before after a update of Mac OS X (but had to change the name of file, much like the original file has disappeared). Just download the next file on HP (no matter that it is not for your printer; it's not mine either (OfficeJet Pro L7680) but it works).
  
  FTP://FTP.HP.com/pub//softlib/software12/COL51752/OJ-125213-3/HP-inkjet-SW-OSX-Mavericks_v12.34.37.dmg
  
  Disable SIP for this installation and when you run the installation program (do not know if you need to do, but I did anyway). To do this, the instructions are here:
  
  https://forums.developer.Apple.com/thread/3981
  
  When you run the Setup program, make sure you hold the CTRL key when you right-click on it, then click Open in the menu.
  
  Run the Setup program. Be sure to select the HP scanning software and install it. When you get to the configuration of the printer, just skip this step (unless you are using the printer in question). The parser components are what you really want from the printer drivers are already in El Capitan, if you have a HP supported printer. The scanning software will have already installed to the moment you arrive at this screen.
  
  Install the HP Easy Scan on the App Store app (if you get the latest version of the software your front-end). You should be able to run the scanner and scans without restart. I don't know if it will work for everyone, but certainly, it worked for me and keep me until they find what went wrong in El Capitan to disable scanning and scanning capabilities.
  
  SIP turn on again so that your Mac is better protected. We should all work after that. After doing the above, I found that I was able to not only use the HP software, I was able to use Image Capture, preview, etc, to get images from the scanner. Your mileage may vary, but if all goes well it will work again for you all.

• HP C7280 All in One printer: HP Scan of the error using HP C7280 all-in-one printer

  I was scanning documents successfully until recently.  I use a Mac with OS X 10.7.5 and receive the following error message when you use HP Scan.

  Cannot perform the analysis because another program has control of the HP imaging device. Try the following steps. After each step, try to scan the image.

  -Restart the program.

  -Close all programs that might be using the device.

  -Restart the computer.

  I tried to download several drivers without success.

  Any help would be greatly appreciated.

  Hello @kellycc,

  Welcome to the Forums of HP Support! I see when you try to scan with your HP Photosmart C7280 with your Mac running the 10.7 operating system, you get an error "cannot perform the analysis because another program has control of the HP imaging device. Try the following steps. After each step, try to scan the image.'.

  Complete the following steps:

  Scrub / uninstall

  • Open the Applications folder > folder HP or Hewlett Packard > Uninstall HP
  • Click continue, click on one of the printers in the list.
  • * Only perform this step if you have not all other HP printers. Hold down the command, Option , and command, while now the three buttons.
  • Click on Uninstall.

  Reset the printing system

  1. click on the Apple icon ( ), then click on System Preferences.

  2. in the hardware section, click Print & Fax/scanning. The Print & Fax/scanning dialog box opens.

  3. make a right click (or Ctrl + click) in the left panel and then click on reset printing system...

  4. click on OK to confirm the reset.

  5 type the name and the correct password.

  6. click OK to reset the printing system. The Print & Fax dialog box shows any selected printer

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol...

  Repair disk permissions

  1. on the Dock, click Applications, then utilities.

  2. double-click click disk utility.

  3. highlight your hard drive / partition on the left (by default this is "Macintosh HD").

  4. click on the button to repair disk permissions at the bottom of the window.

  5. once the repair is complete, restart the computer.

  Restart the printer. Now, you will need to install the printer driver using the Apple updates. Click on the link below and follow the instructions on the screen:

  Installation of your printer driver HP and software for Mac OS X

  I hope this helps, please let me know the result!

  Thank you

• 8710: 8710 double scan from the ADF

  Please help me understand if the HP OfficeJet Pro 8710 supports the double scanning from the document feeder. In http://www8.hp.com/h20195/v2/GetPDF.aspx/4AA6-4026ENUC.pdf , is the line: "breeze through with double scanning multipage documents and an automatic C1900 of 50 pages (a single pass double scan 8730/40 models).  How is - a scan a stack of documents recto / verso on a 8710?

  For comparison, consider how the 6700 manages.   (A) on the computer, open "Scan HP."  (B) select "ADF." (C) place a check next to "Scan both sides (duplex).»  (D) place up to 20 originals in the document feeder.  (E) click on "search". (The ADF feeds the originals in the scanner.  On the computer, a pop-up scanning HP says: "prepare to analyze the other pages of your two-sided document.  To analyze the other side of pages 1. Remove the pages from the output tray.  Do not change the order of the pages.  2. without turning the pages at the wire, turn and place them in the document feeder according to the landmarks of placement on the device. 3. click OK when you are ready. ") F) after placing the originals rotated in the document feeder, click on 'OK '. (The HP scanning software stores the scan on your computer.)

  @gregspinney

  The technical data sheet information in small print:

  3 the single pass 50 sheets, ADF automatic duplex is available with only models 8730 and 8740. 8710 and 8720 models have an ADF 50 sheets of double mechanical

  While scanning two-sided "single pass" is not available on the 8710, it should provide an automatic duplex scanning.  The leaves should go through the printer, print one side, flip and scan the second side.

  Printer:

  All-in-one printer, HP OfficeJet Pro 8710 range

  Full software features:

  File name: OJ8710_Full_WebPack_1881.exe

• OfficeJet Pro 8600 more Scan to the computer

  OfficeJet Pro 8600 more "computer scan", "Save as editable text" computer PC with Win 7 and JO 8600 Pro installed and operating normally, JO 8600 Pro on a wired home network.

  How does the 8600 file names and how can I control the names.  My 8600 JO ProPlus is name my text files using a name I once attributed to a sweep of several weeks rather than use some name generic scan or the date!

  To change the settings of advanced scanning

  Function of your printer, advanced settings contain options to adjust the brightness, contrast, quality scan, set the OCR language and change the destination of digitization.

• I'm running a full scan of the system with my anti-virus software and it filled almost my laptop crashes, problem with the vga865.fon file

  I'm running a full scan of the system with my anti-virus software and it filled almost my laptop breaks down when it comes to: -.

  c:\windows\winsxs\x86_microsoft-Windows-font-bitmap-oem_31bf3856ad364e35_6.0.6000.16386_none_fb2d5aefb17b8d65\vga865.FON

  This file can be replaced.  When I scan this folder individually its fine, please help

  Thank you

  Hello

  What protection software antivirus you are running on the computer?

  Method 1: Check if you can run the scan in safe mode without in all questions

  Follow the steps mentioned in the link below to access the secure mode
  Startup options (including safe mode)

  Method 2: you can run Safe Mode security monitor, see the steps in the article below
  How to install the free Windows Live OneCare Safety Scanner and then scan your computer in Mode safe

  Method 3: Follow the steps mentioned in the link below to check your hard disk for errors, and then check if the problem is resolved
  Check your hard drive for errors

  If the problem persists,

  Method 4: Long file name could cause this problem, perform a backup of the file (copy it somewhere else), and then rename the file, check to see if that makes a difference

  Note: Copy the file to the original location.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP OfficeJet 8600 Premium: Scanning to the desktop

  Hello

  I use the HP OfficeJEt 8600 Premium and I would add three computers to the scan function, so when I scan a document, I can choose the computer I would like to than the scan-to-file.

  I would like to know how to configure the folder so that it scans a folder on the desktop, titled 'Scans' against the 'Document' default folder.

  Today, I spent a few hours playing with it, following the instructions on the forum and further research on google. I could program to scan to computer 1.

  I then changed the name of the computer, somewhere in the HP Scan Utility preferences... then on the touch screen of the printer performs, under scan > not scan to computer, NO computer has appeared.

  I would like if anyone can break it down for me. How can I program it to allow all 3 computers connected wirelessly, to receive scans to their individual workstations. ALL 3 are Mac.

  SECOND-

  I want to program this tray 1 can be white paper and tray 2, letterhead. Have not spent time on it yet, but would love if anyone knows.

  Thank you

  CASS

  Hi @cass321,

  I can certainly help you to scan to your computer and edit your destination folder. I understand that you do not want you can scan all 3 of your computers when you scan from the front panel of the printer. Please take a look on the following document, you can find frequently asked questions particularly useful: HP Officejet Pro 8600 Series printer - scanner to a computer, email, memory device, or network folder.

  What about using it the 2nd test paper for paper replacement types, please take a look on the following document, I suspect it will answer questions you might have: HP Officejet Pro 8600 e-all-in-one printer series (N911) - setting up the printer to print and copy of tray 1 and tray 2.

  Please let me know if you have any other questions. I'd be happy to offer further assistance, thank you.

• Scan from the printer to the pc wireless

  I have officejet pro 8600, it allows to scan to my pc, but I change to a new room and changed the password and now it will print and scan from my pc, but not the printer to the pc, I set myself until I have change the pass with the switch, but now who would not work and now I can't even come... Help please!

  Hello @kimsgirll1999,

  By the sounds of your post, it only appears that all background programs running on your Windows 7 computer is originally interference when trying to scan to your HP Officejet Pro 8600 e-all-in-one printer. Before the reactivation of these background programs can I please have you try the following steps.

  Enable the computer analysis:

  1. click on the HP Printer Wizard on your computer desktop icon:

  

  2. click on Actions of the Scanner, then Manage scanning to computer.

  3. click on Activate to activate the scan function. If the scan function is already enabled, click disable, and then click Activate again.

  4. on the printer control panel, press Scan (), support on computerand then tap the name of the computer that is displayed.

  If the scan of the computer working now, please activate your start-up services through the 'step 5: reactivate MSCONFIGthe steps I described in my post above.

  Once Msconfig services are activated, try to scan from the front panel of your printer to see if your computer is always present.

  Please let me know if this procedure works for you. Good luck!

• File bundle (MaintenanceMinder.bar) was rejected. Package ID is required for all .bar file. If this is an upgrade, ID of Package must match ID of Package in the bundle of original file.

  Hello

  I released maintenance Minder application in portal provider for smartphones (BBOS) and QNX.

  For mobile app OS QNX it is inconsistent in the name of the Organization, so I created new signing key, but I'm not download the latest version.

  error:

  File bundle (MaintenanceMinder.bar) was rejected. Package ID is required for all .bar file. If this is an upgrade, ID of Package must match ID of Package in the bundle of original file.

  Please remove this package so that I can give the latest version. If you need assistance please complete

  Hello perumala,.

  Please be more patient.  As per the response automatic you received when you are connected to a case of pension, the team will answer you within 24 to 48 hours.

• Cannot return after rejection App-> bundle File (ThaiNumber.bar) has been rejected. Package ID is required for all .bar file. If this is an upgrade, ID of Package must match ID of Package in the bundle of original file.

  My 'ThaiNumber.bar' application was rejected. Can I change app and will need to submit Appworld

  It got error

  "Bundle file (ThaiNumber.bar) has been rejected." Package ID is required for all .bar file. If this is an upgrade, the package

  ID must match the ID of Package in the bundle of original file. »

  Help, please

  Looks like you changed the name of the application in your config.xml file, or use a computer/signature different keys.

• 404 error when the lowest selection (column name) for the metadata 11 g dictionary

  
  Hi all

  I get a 404 error when I select a column name and click the link for dictionary of metadata. I get the 404 because obiee is allowing more 179 characters for the web link. You do not get a 404 error if you click on one of the shorter column names.

  When you select the number of offices with commands and then click the metadata dictionary button you get the error 404 below and the web address is truncated causing the 404

  This is the product link

  http / / self/analyticsRes/SampleAppLite_BI0024/SubjectArea/PRCAT_Sample_Sales_Lite80cb6a2e /.

  PRT_Calculated_Facts80cb6aa9/PRC_N_of_Offices_with_Or80cb6cfb.x

  If you type the ml at the end, you can see the Web page you want. Also if you click on the area in question and then click the dictionary of metadata and access the column from here the link works.

  
  

  

  We receive this error in our Dictionary of metadata generated, but I can also reproduce the problem with the sample app, we have placed the dictionary in the folder anlyticsRes.

  I just wanted to check to see if someone else has this problem.

  Thanks in advance!

  S. Clark

  I opened a SR and a bug has already been reported, and the solution is in the latest patch.

  Solution

  The fix for the Bug 17449036

  is included in the bundle 20124371 Patch (patch bundle 11.1.1.7.150120). See this note for more information:

  Note 1488475.1: OBIEE 11 g: required and recommended patches and Patch Sets

  There is also a one-off Patch 17449036 on top of previous patch bundle for different platforms.
  It is advisable to be in the latest patch bundle. In this case, you prefer to apply exceptional measures, you can do but
  It is not for all platforms and all the patches together.