Scan of the computer does not work in silent mode of the button on the front panel.
The machine is the Photosmart all-in-1 6280 on a network of small size and using the HP Solution Center. Basically everthing works fine, but when I use the button on the front panel to scan a document, it seems necessary to walk to the computer to answer a question about whether I want to scan another document until I could walk to the printer/scanner and press the button to scan the following document. Surely, there must be a way to do the scan run in quiet mode so that I don't have to keep clicking OK on the computer every time? I have already disabled the overview of digitization and the prompt for advanced options.
Oops, forget all that; now I found the setting 'interrogate analyses' which stood on another branch of the installation menus. That solved my problem
Tags: HP Printers
Similar Questions
-
The CD/DVD on my computer does not work and I can't update the Office XP Service Pack 3. Microsoft can do for me?
Hi Nancy,.
I suggest you provide more details as to how the problem came to be or how and when it happens. There are many experts here, but you must give specific detailsSee you soon ~ -
Remote assistance from an XP machine on a Windows 7 computer does not work.
Remote assistance from an XP machine on a Windows 7 computer does not work. The connection expires whenever I try to connect. Any suggestions?
RA from Windows 7 to Windows XP is supported, but RA from Windows XP to Windows 7 is not supported unfortunately
-
How to disable series when your computer does not work?
How to disable series when your computer does not work?
and also how to use for computer B that you recently purchased?
Thank you
Shine,
You can install and activate the perpetual software (purchased) two computers of the same type (mac or pc), as long as you use it on one at a time. (lightroom is the exception because it is a product of multi platform, so it can be installed on the pc and mac platforms)
It is advisable to disable the software on a computer on which it will be is most used, especially before giving away or selling the computer or reformat the hard disk. Please see this link: How to disable the software. This frees an activation if you have the option to install the software on another computer at any time.
If you do not have access to your old computer because you have replaced a hard drive, upgraded your operating system to format your computer before you deactivate your software or your computer is dead, you can ask Adobe Support to help you disable from a machine, you cannot access. Have your serial number or Adobe ID ready, then contact us.
To load the software on another computer, download and install it as you did on the first computer. Then enter your serial number to activate it.
Guinot
-
Get the error, Drivermax does not work in Compatibility Mode
I installed an updated driver called drivermax, but whenever I try to download the updates, it says does not work in compatibility mode, change back the settings to devices.exe. I don't know what they mean or how to do that, someone has an idea?
Please make sure that you have installed the latest version of DriverMax, this problem should be solved. Anyway, please contact us at http://www.innovative-sol.com/contact/ and we will do our best to help you.
-
Windows xp pro does not work in normal mode. I can make it work in safe mode. I can't find my XP cd. I don't have the serial code and key. How can I load xp and try to fix the problem.
Thank you
Mikeoriginal title: need windows xp proHello
Since it works fine in safe mode, I suggest you to try to perform the audit and the boot if it helps:
http://support.Microsoft.com/kb/310353NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.
It will be useful.
-
Keyboard does not work in safe mode
Sometimes, when I have a problem the tech asked me to use mode without failure for certain tasks. But my keyboard does not work in safe mode. I am NOT using a USB - I have windows xp service pack 3. How to remedy? blondeagent99
Sometimes, when I have a problem the tech asked me to use mode without failure for certain tasks. But my keyboard does not work in safe mode. I am NOT using a USB - I have windows xp service pack 3. How to remedy? blondeagent99
With windows, access device mgr by right click on my computer > properties > Hardware tab > Device Manager button. Locate the keyboard in the list. Right-click on it and select the driver tab choose to uninstall the driver. Now, click on the button to update the driver. See if this will solve the problem.
Kind regards
Joel
Free computer support and diagnostics-->> http://repairbotsonline.forumotion.com/
-
The scheduled scan output of McAfee does not work after update to W - s7
Hello.After upgrade to W - s7 scan-out expected of McAfee Total Protection 2010, a license does not work on Toshiba Upgrades.Support McAfee program not able to help, worked 3 hours and sent in support - Russian? for us, it is not present. Perhaps who fell on a problem as well. I'll owe for any information. Thank you
>... does not work on Toshiba upgrade program
What program does? AFAIK the upgrade Toshiba travels TEMPRO.
We think the same? -
My HP SimplePass fingerprint reader does not work after the upgrade to Windows 10. Is there a fix for this yet?
I thought about it. The upgrade to Windows apparently damaged 10 HP SimplePass software. Once I uninstalled and reloaded the program, everything started working.
-
Locking the computer does not work
Run Windows 7 Enterprise (64-bit)-
Just to blow the windows + L combination ctrl + alt + del and 'start'-> lock does not work. (they work perfectly for years!)
Windows + m, windows + e both works very well. right click on taskbar & works Task Manager.
checked for HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System registry entries (only DontDisplayLogonHoursWarnings (1) & LogonHoursAction (2))
No hardware changes, no new applications or other software - with the exception of the items installed via windows update (value recommended settings).
Any help appreciated...
For someone who implied that they like to understand * why * things happen... ;-)
Troubleshooting this would entail now manually install a fix from Microsoft at the same time, restart and test the features you lost before - BY PATCH.
There is no more it wasn't a single patch from Microsoft (you'll get through them all, without ill effect) or you will find one that has the problem.
-
Scanning drive for errors does not work - PC freezes
A scan of disc scheduled to start at the start, the opportunity to cancel the account up to 1 second and the computer freezes. The scan does not work and I have to kill power PC (and then cancel analysis so it doesn't freeze again).
Then I tried the following experiment. I have connected to my administrator account and demand there from there. Then it worked fine. So should I assume that this must always be done from the administrator account? If so, Win7 should not allow you to schedule a chkdsk from a nonadministrator account. Comments?
Thank you.
You can schedule a chkdsk only the administrator account. If you plan it no admin is a standard account, you must run the command prompt mode elevation and elevation itself to give the administrator previllege. So what you want to say about it. Are you talking about the built in Administrator account by any chance? If so, then the user account where you have planned is corrupted try to create a new and check.
-
Original title: restoration works not
The weight restoration on my machine does not work. I've highlighted the dates but I get... impossible to restore messages. I tried switching off my virus checker (Norton) but with the same result.
Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.For example, if you use Norton/Symantec products, you will see a message like this:Restoration incomplete. Your computer cannot be restored...It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.
It works for some configurations.
-
my computer does not work properly and very slow
Dear Sir.
my pc does not work properly and very slow
Can you help me
Velmurugangr
Here are some tips to help you speed up your system and Foundation repair.
1. http://support.microsoft.com/kb/310312 cleaning disc
2 Disk Defragmenter http://support.microsoft.com/kb/314848
3. how to uninstall the unwanted/unused programs http://support.microsoft.com/kb/307895
4. How will I know if I have a http://windows.microsoft.com/en-US/windows7/how-can-i-tell-if-my-computer-has-a-virus virus
5 tools to remove the virus Security Essentials
6. how to run check disk http://support.microsoft.com/kb/315265
Your question is a little vague, suggestions above should give you a good start to decide the issues you face. Let me know it it helps. Thank you.
-
The NIC failover does not work in LBT mode
Dear community,
We met a strange behavior in our network environment while testing our new Cisco 4500 switches x 10g. If you have a TCP Session (example JJ | netcat) data transfer between two virtual machines on different host esx failover does not work on the VM receiver if a physical connection fails.
The test configuration is as follows:
| | - 4 - switch 1 vmnic - vmnic 4-| |
VM1 | ESX1 | | VSS | | ESX2 |-VM2
| | - 5 - switch 2 vmnic - vmnic 5-| |
More details:
- The switches are configured as a cluster VSS. New version of the software
- ESX1/2 are running the latest version 5.5
- The two vmnic is active on a DV-switch in LBT mode
- Exchanges are configured with "Port based on the physical NIC load."
- VM1 and VM2 are invited linux, NICS are vmxnet3
Steps to reproduce:
- Beginning listening mode on VM2 (netcat-l Pei 12345 |) JJ = / dev/null)
- Start the transfer on VM1 (dd if = / dev/zero bs = 1 M | netcat VM2 12345)
- Check which link is used (in my example vmnic5 on ESX2)
- Unplug the ESX2 vmnic5
What you observe:
- DD-traffic dies immediately
- If you kill the dd on machines (it does not end by itself) and start all over again, it works immediately
- If you ping VM1 VM2 or another system, it works
- If you plugged vmnic5 again once the virtual machine is switched to new vmnic5-> if you didn't kill dd will continue
Now to test the reverse:
- Beginning listening mode on VM2 (netcat-l Pei 12345 |) JJ = / dev/null)
- Start the transfer on VM1 (dd if = / dev/zero bs = 1 M | netcat VM2 12345)
- Check which link is used (in my example vmnic4 on ESX1)
- Disconnect vmnic1 ESX1
What you observe:
- Failover works like a charm
- Failback works like a charm
Conclusion:
- Only the virtual machine at the front desk has a problem
- Only an already established TCP session behaves badly, work of new sessions very well (as does ping, no losses)
- If you use LACP place LBT on uplink the problem disappeared
- Same problem if you connect two links to Switch1
- Same problem if you use a physical box with linux and LACP as system
- I did the same test with two c3750x (no cluster VSS) and has not encountered the problem
Any ideas? It's really a good one.
Thank you!
Sascha
Update:
To make it clear, it doesn't have the transmission of UDP.
Post edited by: sewert1
I did some further testing and also involved cisco. There is no problem with the switches and network in general.
Turns out he works with Windows clients, but it does not work with Linux. But it works with Linux with adapters e1000 and e1000e but not with vmxnet3.
So I did some tests and learned that the vmxnet3 kernel module must be at least version 1.3. Version 1.1 (SLES 11 default) or 1.2 (default SLES12) does not work.
(./vmware-install.pl--clobber-noyau-modules = vmxnet3)
-
Want 5530: want to scan from the front panel of the printer computer
Hello
I am not able to use the scan to computer function from the front panel of the printer to a PC recently updated.
On the front panel, I press 'Scan', then 'computer '. The name of the computer to which I want to scan is listed, so I select it. The scan preview screen appears then I press 'analysis '. After a standby display told me that the computer does not have to check the cable, etc...
The PC is turned on, and the connected user.
Printer is connected directly to the PC via USB cable.
PC operating system is Windows 64-bit 10.
Printer is 5530 want all-in-one.
HP Print and Scan Doctor no problem.
I tried with a disabled firewall.
I uninstalled and reinstalled several times (using a new download of HP).
When I open the printer software 'manage the scan' is not listed (only the Scan item is 'search for a Document or a picture", that works).
Test page will print from PC.
Another PC (running Windows 8.1, connected via a network) seems to work.
Any suggestions?
Hello
Thank you for using the HP Forums. You can try this:
Please uninstall and reinstall the software COMPLETE features, follow these steps:
1 uninstall the software from your computer
Try this program to uninstall Microsoft
https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed...
2. download and save the software COMPLETE features (do not install online)
The following resources will help you:
HP printer install wizard for Windows
http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe3. install the FULL feature software "saved".
Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
If you are installing via a USB connection, connect the USB cable only when prompted by the software.
Let us know if it works!
Maybe you are looking for
-
I tried 3 times to download sierra on Macbook PRO and using OS10.9.5 with > 60 GB of free space, 8 GB of ram. Said it will take 12 hrs. The next day he says only: he couldn't.
-
How can I disable secure on my Satellite L500-1Z1 start?
Hello! I need to install FreeBSD on my laptop. But I can't find in the BIOS how can I disable secure boot.Please, help me. How can I disable startup secure on my laptop? Thank you! Sorry for my English!
-
HELP - FPGA SPARTAN 3E-100 CP132 WORKS WITH LABVIEW FPGA?
HI EVERYONE, GET ON IM TRYING TO USE MY FPGA WITH LABVIEW, BUT I DO KNOW THAT IF ITS COMPATIBLE, I INSTALLED THE DRIVERS, MODULE FPGA AND LABVIEW 2012, IM USING WINDOWS 7 32 BIT, AND AFTER I COMPILED ITS SAYS: LabVIEW FPGA called another software com
-
System error 31 during the loading of the LabVIEW runtime engine
I get the following error message. I've attached a screenshot of him as well. System error 31 during the loading of the LabVIEW runtime engine (\\lvrt.dll) I'm trying to update an instrument running Windows 95. What is system 31 error? I can't fin
-
My c410 HP Premium Fax e-all-in-one won't copy (white spell page), only prints in faded gray even when the quality is set to 'best', will only print up and part side of page - excludes the middle of the page and analyze only a portion of the document