SCAN TO COMPUTER

I'm used to be able to scan to the computer by clicking a shortcut for my Officejet 6500.  My menu has changed, so I don't have this option.  I tried to uninstall and reinstall the software.  I also rebooted my entire network without result.  Help!

To get the option back, try to uninstall and reinstall using the latest drivers from Hp. Who should get your scanning options.

Let me know if it helps.

Tags: HP Printers

Similar Questions

  • How can I avoid firefox reset my browser preferences when my antivirus software scans my computer

    Starting on 19/02/2013 every time that my antivirus software scans my computer (per day), various Firefox browser preferences are being reset. (It seems that Firefox can be reset to the default value.) My home page is reset to mozilla etc...

    I have reset Firefox, un-installed and re-installed Firefox to no avail.
    Each time the computer is scanned my browser preferences are lost.
    

    The following information system:
    Windows 7 pro 64-bit
    AVG antivirus 2013 current build.

    Firefox v19.
    

    I don't remember anyone to another report that AVG has done this. In fact, it would be useful to know exactly what did AVG. Your home page is stored in a file named prefs.js in your personal settings Firefox (your Firefox profile folder). It deletes this file? Replacement of a 'clean' copy it right? He characterizes the read-only file so that your changes are not saved between sessions?

    Could you make a backup copy of your profile folder if you have around comparison after running the analysis? You will need to store on a USB key and it is not be analyzed, too.

    To access this folder, you can use

    Help > troubleshooting information > "view file" button.

    Navigate from one level to Ctrl + drag the folder to the destination of the copy.

  • "Scan to computer is enabled no longer."

    After the upgrade to Windows 10 I continually get this message, "Scan to computer is no longer enabled.  I disabled "Scan to Computer" network printer and ran print and scan doctor and you have restarted the computer and the printer. I always get the sporadic message. It is very annoying.

    Thanks for posting on the HP Forums!

    I should be able to provide suggestions!  Looks like that a little a problem with the software and scanning to the message from the computer.  When you disable the scan of the computer should be a checkbox bellow the button.  The box should say something like "Automatically start scan of the computer" when I log on Windows Make sure that this box is NOT checked.

    If the above suggestion already exists and you are still having the problem then I suggest that you uninstall the HP software. Once the uninstall is complete, it would be wise to perform a cleanup of the computer disk. A disk cleanup will improve the performance of the computer and remove the temporary files that may cause problems during the installation of the software. Once disk cleanup you must restart the computer and reinstall the HP software.

    To uninstall the HP software, click here: uninstall the HP software

    To perform a disk cleanup, click here: Windows Disk Cleanup (same steps for Windows 10) 8.1

    To download the HP software, click here: HP Officejet 6500 has more full feature software and driver

    If you please, after back and let me know how everything goes

  • "Scan to computer" the printer only works for admins

    HP Officejet 6700, OS X Lion. Latest version of the software.

    Only admin users can scan the printer using the screen touch "Scan to Computer".  The non-admin users get communication errors. The computer is listed and after choosing works very well if the admin user is the active connection. But if a standard user is the current user, then it does not work. Scanning HP utility does not connect on the standard user account to "Activate the Scan of the computer". That translates into a communication error. But return to the admin, and it connects.

    Surely, it works in a context of user multi for non-admins. Do the other admin users is not an option.

    Standard users can use the HP scanning app on the computer, but the family loves the conveinence of the button "Scan of the computer. Its a nice feature. But seems broken.

    Fixed it! I just needed you to give me advice in the right direction. File on the file plist property seemed incorrect, so I changed to match the other hp plist file:

    iMac27:LaunchAgents pdivita$ ls-l * hp *.
    -rwxr-xr-x 1 pdivita admin 395 com.hp.devicemonitor.plist May 26, 2012
    -rwxr-xr-x 1 root wheel 673 com.hp.messagecenter.launcher.plist January 19, 2010
    iMac27:LaunchAgents pdivita$ sudo chown root: wheel com.hp.devicemonitor.plist
    Password:
    iMac27:LaunchAgents pdivita$ ls-l * hp *.
    -rwxr-xr-x 1 root wheel 395 com.hp.devicemonitor.plist May 26, 2012
    -rwxr-xr-x 1 root wheel 673 com.hp.messagecenter.launcher.plist January 19, 2010

    He now works in any account. Possible sound when I tried to fix my problem of no printing in January, one of the suggestions involved edit this file plist for HP Device monitor has not started, because it has been reported to cause problems in the past. Too bad repair disk permissions did not catch it. Thank you very much. Scan of the computer is a nice feature. (Although, the constant polling of devices HP monitor I see in the activity monitor always makes me nervous.)

  • HP Officejet Pro 8600 Plus: HP Officejet 8600 does not scan to computer more - after having moved from the House

    Equipment:

    HP Officejet Pro 8600 more

    MacBook Air mid 2011

    Mac OS X Lion 10.7.5

    ASUS router DSL - N16 (new)

    I moved home and brought my computer and printer with me. I chose a new access provider and sent the new router.

    My old House my computer and the printer/scanner worked fine. Now set up at the new House and I can print but it won't scan. The computer and peripheral HP are connected to the router. I uninstalled all the HP software and reinstalled. On the front of the printer if I select Scan of the computer he says not 'found computer.... ' Make sure that the feature is enabled"using the HP utility. But in the HP utility there is not the option "Scan to Computer" more. I used to be able to scan to the computer to the printer, and I used to have a scanning tab in system preferences / print and scan - but not more!

    Details of what I tried:

    1. Uninstalled HP software.
    2. System preferences / Print & Scan - removed all printers.
    3. On the front of the printer: you click Network and disconnected.
    4. Off, computer, printer and router.
    5. Tour of router on. The printer is turned on.
    6. Used the wireless configuration wizard.
    7. Chose my router - "Found WPS router".
    8. The router WPS button is pressed. 'Network connection' 'successful connection' (n.b. left wireless live 'Off').
    9. Turned computer on - check the connection to the router OK.
    10. System preferences / print and scan - Add printer. He sees my printer - I select this one.
    11. Option to download and install the software of Apple-selected.
    12. Printer appears in Print & Scan-Idle / green spot. There is a print tab and a scanning tab.
    13. Click on the power levels: "Information not available". Click the HP utility: "unable to communicate with the device selected. Try to print: "the printer is not connected.
    1. Go to support.hp.com/gb-en/drivers - type in the printer model.
    2. Download the installation software "HP Officejet Pro driver software and full functionality" version 12.23.0. Save the dmg file.
    3. HP download and install the wizard downloads files on computer. Click on dmg download, double click on HP Installer.app.
    4. Click the HP Installer dialog box. Ignored HP ePrint offer.
    5. "Select the device you want to install" - no device is listed. Click on «my device is not listed...» "and"continue ".
    6. Select model device drivers - 8600 network / wireless Officejet Pro. Installation options: checked HP recommended software and additional software.
    7. Software installed with success, but still need to configure the device. Press to continue.
    8. Device not shown yet. Add device manually, using the IP address of the printer. Printer is displayed.
    9. 'Add the Print Queue' box - must add the printer to the system by using the "add a printer".
    10. Click IP in the toolbar. Protocol: HP Jetdirect - outlet. Enter the IP address of the printer. "Print using" field shows my device. 'Add '.
    11. Back to the installer - congratulations! Successfully installed.
    12. Utility HP ok - prints ok.
    13. On the front of the printer: select Scan / scan to computer: «no Found computer...» Make sure that the feature is enabled. Mac OS X: open utility HP. Under scan settings, click Scan of the computer, and then make sure Enable Scan to computer is selected. »
    14. In the HP utility, there is no "Analysis settings" or "Scan to Computer". There is "scan to E-mail and"Scan to Network".
    15. In the system preferences / print and scan - it doesn't have the printing tab and the tab analysis (see 12 above)
    16. Check the built-in Web server. Wireless status is connected. On the scanning tab I can Webscan to computer (but only 1 page at a time - not good for multi-page documents!)
    17. Try Apple Image capture - no devices specified in the list of devices.

    Hello

    First, make sure you have the latest firmware installed as follows:

    http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8600-plus-e-all-in-one-printer-series---N911/4322915/model/4323647/document/c02919168/

    Then, try the following:

    1. Of the printer, click on the right arrow / left and press the ion of the configuration of the printer.
    2. Select Network Configuration.
    3. Select direct Wireless Configuration.
    4. Ensure the Direct wireless is enabled and take one step of his password if such a value.
    5. Click on the WiFi icon from your Mac and connect to the SSID 8600 spirit "live / Print" in its name.
    6. Go to System Preferences > print and scan and click on the plus sign to add the printer - you see it listed as Hello via the direct wireless connection?

    Please let me know the results, if it not listed as Hello with Direct wireless, which clearly show that the new router interrupts the multicast connection, this is the same as the connection through a different router.

    On your screenshot, it seems that your router do not transfer packets to multicast to the need...

  • ENVY 7640 e: scan TO computer device

    Computer and printer connected wireless.  Prints and copies fine. Scan initiated computer very well.  The problem is during a scan of the e series WANT 7640.  It will scan pages 2 and after that, the analysis fails.  The network is fine.  The software is up to date; uninstalled and reinstalled.  The printer was unplugged for 3 minutes and restarted.  So far, no treatment of discussion online.  I need to be able to launch an analysis of two sources; the purpose of my purchase.  Thanks for any help.

    Hello

    Try to do a full restart of the cycle as follows and chck for the difference:

    1. Disconnect the power from your router for 10 seconds, plug back in and allow the router up to 3 minutes to start.
    2. Restart both the printer and then the Mac.

    Now try to scan from the printer and check for the difference.

    If it persists, you see the scan to the State of the computer as active and in the HP utility Greem?

  • Photosmart 6520: Can not scan to computer

    I can scan is no longer on my computer. I have a message to ensure that the "Scan to Computer" is selected via the printer software. Where can I find it. Printer works fine.

    Hello

    Thanks for the additional comments.

    You can always try our suggestion.   In order to enable the analysis of calculation, you need to install the FULL features software, then by activating the "Scan to computer" as shown.

    Hope that helps

    Thank you.

  • Scan to computer need help

    Hello

    I have a little problem with my printer HP Deskjet 3050 a J611. I'll try to explain my best. I managed to install my printer and everything works fine apart from when I turn on my laptop the Scan to my laptop computer function causes to continue looking for the printer every few seconds (when the printer is powered off). I know that it is looking that the arrow on the screen continues to spin in a circle like the laptop did something in the background. As well, when I click in the toolbar and open Scan to computer he explains he will keep looking for the printer that is currently offline. It is not a huge problem, but annoys me as it does constantly, I realized that the analysis of the it function adds 2 additional programs to my startup programs. Rundll32 and HP Imaging. If I disable the beginning upward then the problem disappears, apart from the fact that there is no computer scan to option now that it is off to start. I can't understand how simply turn Scan to computer on or off from my laptop? I am running Windows 7 64 bit. Not that I think it would be serious?

    Hope it makes sense?

    Badjester,

    Follow the son of the exact printer suffix and then select the operating system. Download and install the Scan doctor and HP printer. Seehereto start the process.

  • If you are using Safari a warning appeared, i.e. computer can have 3 viruses. Suggest download MacKeeper you and scan your computer. IP address: 78.146.23.13 What should I do?

    In Safari, an alert appeared: the computer can have 3 viruses, download MacKeeper and scan your computer, the IP address: 78.146.23.13

    What should I do?

    Ignore it. Close the tab that you opened when he appeared.

  • iMac: Scan to computer does not

    Recently, I upgraded my iMac to Mac OS Sierra (10.12) and can not seem to get the analysis to the computer to work. I reinstalled the latest version of the HP software for my printer several times. Restarted the computer and the printer several times and it will not work. Launch Scan to computer I get an error "sakhi of computer can not be activated: the HP software required for your computer could not be located on this computer." If please dwonload and install the last recommended HP software for your device... This system has worked well in the past.   When I followed the link for the HP drivers for my printer driver need me for HP Easy Start 2.4.0.125 is 5.4 MB 28 September 2016.  Y at - there a patch to fix this?

    Hi Breezy52,

    I wanted to stop and add my comments that @HevnLgh is missing currently.

    I checked the drivers on the site hp.com for your Officejet 8610. There is no feature complete drivers and the software for Sierra. I'm not sure if or when they will, however, you can consult the site regularly to see if they are released.

    Up here, you will not be able to scan using the HP software and will need to continue to use your work around option. I understand this is not a complete solution, however, I hope this information helps.

    Link to the website of drivers: HP Officejet Pro 8610 e-all-in-one printer

    Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  • No option for "Scan to Computer" Lion mountain on Mac

    I installed the latest drivers from "full functionality" for my Officejet Premium 8600, v12.23.0.

    I'm running OS X 10.8.2 (Mountain Lion).

    I want to be able to scan directly from the printer to my laptop, using the function "Scan to Computer".  However, when I open the HP utility, I see no option for "Scan to Computer" in scanning settings.  I don't see options for 'Scan to email' and "Scan to Network Folder".

    In the search of these forums, only suggestions that I found are to install the full featured of the printer drivers, I have already done.

    Many thanks in advance for any help!

    -Nate

    Click your desktop, then click on the menu to go to the top and select Applications you should see the Hewlett-Packard folder.

    If you do not see such a folder, run the installation once more, make sure you check the HP recommended software during the progress of the installation...

  • Scan to computer unavailable

    I just got another new printer & I get SCAN TO COMPUTER currently UNAVAILABLE? How to activate

    Yes I did
    Now, I can scan the meter
    Thanks for your help

  • OfficeJet Pro 8630: Remove computers in the menu "scan to computer" on my OfficeJet 8630

    Hello

    I would like to know how to remove computers in the menu "scan to computer" on my OfficeJet 8630. Some of the computers on our network no longer exist, but they still appear in the menu display 8630 When you select the computer to send a scan to.

    Thank you

    Rex

    Hi Rex63,

    Unfortunately, I see no way to delete these old connections in the printer menu.

    However, it seems that power the printer off and on again removes network printers in the scan list if they are not connected to the network.

    Looks like you could work in an office environment where the printer is still on, a reset of the base could do.

    If this does not work, you can also try a "hard reset" in which the printer is turned off and unplugged for 60 seconds.

    Finally, an update of the firmware is out for the Pro JO 8630 11/05/2016. If your printer does not have the auto-update feature enabled, you can try to update the firmware. You will find here the firmware update instructions.

    I hope that one of these solutions help!

  • Photosmart c7180 cannot scan any computer file except C:\Users...etc... \Scans.

    New desktop computer. New OS than Windows 7, 64 bit. Office Enterprise 2007. Software loaded new Photosmart c7100 CD purchased from HP as directed.

    Photosmart c7180 cannot scan any computer file except C:\Users...etc... \Scans. I want to scan to E:\

    Nothing wrong with the scanned image. No error message.

    Found. Settings, scan settings, scan to... Configuration, settings button, buttons search for the solution Center, manage shortcuts scan... and then create new shortcuts in the folder of your choice!
    How bypassed can you get?

  • HP Deskjet 3050: Hp Deskjet 3050 how scan from computer to the printer?

    Since I can't print

    I was wondering how I could scan as to place the paper and scan from the computer?

    Isn't this possible?

    Thanks for the reply

    Sabrina33 wrote:
    ... I was wondering how I could scan as to place the paper and scan from the computer? ...

    Hello

    No, you cannot scan from computer to the printer. You have to put original on the glass and you can use the HP scanner on computer software to scan and save a document/photo scanned on computer.

    My question: do you have installed the software and driver on your computer yet? You should do this first.

    Kind regards.

  • HP 4500 ENVY: I have a HP ENVY 4500 and impossible to activate scan-to-computer.

    I'm unable to scan documents on my copier/printer/scanner. I did some troubleshooting by entering the IP address in my iPad that I was instructed to do and told me that the "scan-to-computer" function had been disabled. But I can't understand how to re-enable the feature "scan-to-computer". All other features of my HP ENVY 4500 work correctly; the scanner is the only thing that I can't go to work. When I try to scan anything that a message appears on the printer screen that says: NO COMPUTER FOUND Make the printer software is installed on your computer, and that "Scan to Computer" is selected.

    Hello

    Scanning to a computer from the front panel to scan to a computer with Windows or Mac OS X, not a Tablet as I understnd of your information.

    Since iPad you can scan by launching the scan from the HP AIO Printer Remote app, not the printer itself.

    You can follow these steps to scan from a mobile device:

    http://support.HP.com/us-en/product/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5304876/document/c02486319/

    Kind regards

    Shlomi

Maybe you are looking for

  • firmware 777

    How to install the update of the firmware 777 for time capsule... is the instruction to the Apple homepage useless I opened the airport program... a red 1 appears next to the capsule of time... but no luck at all anywhere to click "Refresh" or "insta

  • Why Firefox was leaving my home page is not displayed correctly?

    I currently use version 3.6.24 Firefox on my PPC mac with 10.4.11 system. I use Firefox for many years without any problems. I received yesterday and on my screen to alert that there is a new update of Firefox available at the facility. I clicked on

  • Pavilion m9077c blocking and screen fuzzy

    My HP Pavilion W8.1 running recently started locking up with a fuzzy screen. Tried:1 blew out case - the gpu temperature fell from 70 to 70 low C c. 2. Update driver Nvidia as well as other relevant factors 3. the shutdowns occur at normal startup un

  • picture password problems

    Hello all, I am pleased that these forums exist.  With this new product, it is good to have others to learn with.  I did a search and did not find all the messages with my problem. I set up a password photo on my Pro 128 GB version with the keyboard

  • Outcome of the intention to create options

    Hi allI'm trying to check if a document has the intention set on the digital edition option and if no, create a new one that offers this option. I tried the script below, but that doesn't seem to work as expected. Any suggestions would be much apprec