Scan to MultiPage Deskjet F380

Similar Questions

• HP deskjet F380 all in a single installer

  I need help how do I find a driver for my printer hp deskjet F380 all in one, because I lost my driver please help me thanks in advance

  Hello lovebird21

  The link below will take you to the download page for Deskjet F380, just choose your operating system and download the full feature software if they are available for printing and scanning.

  DeskJet F380 Software

• My Deskjet F380 printer will not scan after upgrade from XP to Windows 7 32 bit

  I have a HP printer Deskjet F380 (S) NC 73 NGZ14S which worked perfectly on Windows XP. Island re install software without disk original and well as the printer and copier are working the scanner is not. I have downloaded and run the Wizaedand that had this message "Full HP software is already installed, but the basic functionality pilots seem to be missing or configured incorrectly. Assistant and then went to "drivers for your printer are disabled click next to allow them to" clicked Next, and he returned to the previous message again. I have not installed the software on. Windows 7 but I don't know that my original HP software disk has not been used. Now must I UN install Windows 7 and re install from the HP website. I got another message in short while the HP site it says driver required WIA trawling. I'm not very experienced on the computer and would like your help thanks Mimosa

  Yes, I would uninstall the driver and software and then download the driver for Windows 7 and install it.

  Here are some instructions for uninstalling: uninstalling the printer software.

  You can download the driver here: Driver and software downloads.

• HP Deskjet F380 analysis does not correctly.

  Original title: Device HP Deskjet F380

  Hello

  When I scan a document, only 30% to 50% of the document is scanned. I don't know why. If I rescan it it can scan a whole page or can choose another 60% of the document and leave the rest in white.

  Hi TipuNaqvi,

  To provide the proper resolution, that I would need more information on your side.

  1. which version of the operating system are you using?

  2. do you receive any error messages?

  3. did you of recent changes on the computer before this problem?

  I suggest you try the procedure described in the article and see if it helps.

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=46845&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=1128296

  If the problem persists, I suggest you contact HP support for help.
  http://h30434.www3.HP.com/PSG/?category.ID=inkjet

  Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you.

• DeskJet F380 diagnosis reports that I have to reinstall the software, but I already did twice.

  DeskJet F380 / Windows XP / previews of Scanner, but when I accept the preview, it does not complete the scan. I have reinstalled the legacy, installed all updates, but the diagnostic report indicates that I have to reinstall.

  Hello _Lois_

  Try the following procedure and let me know if something changes or if you encounter any problems. It will help to uninstall all printer software and should allow a clean install. This can solve the problem.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.bat6. Once the uninstall is complete, reboot the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  DeskJet F380 Software

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  DeskJet F380 Software

  10. run the download to reinstall the printer

• DeskJet F380: F380 - solution centre message 'Cut' to print but scanner is connected and working.

  My Deskjet F380 worked well but now, I get an error message when you try to print. Scanner is connected and works fine. Solution Centre message appears "Deskjet F300 Series offline!". Convenience store simply said ' turn on the printer!

  Can someone help please! I can't understand that only printing is disabled!

  Hey @AncientPrinter,

  I see that you have some problems with printing from your PC to 10 Windows for Deskjet F380 all-in-one printer. I can help with that.

  Here's what we will do:

  1. If the printer is connected to your PC via a USB cable, remove it.
  2. In your search type in printers bar and open devices and printers.
  3. Right-click on your printer icon listed.
  4. Click on remove the instrument.
  5. Repeat for all other icons printer listed.
  6. If you have removed the USB cable and plug. If not, click Add a printer to add to the queue new print.

  At this point, you should be able to print. If you are unable to do so, the next thing to do would be to start printing and scanning doctor. You can find the Print and Scan Doctor by clicking on this link. It will be either allow you to print, it will provide you with a list of questions, he found. If it finds all he couldn't solve the problems then please let me know what those who are.

  Please let me know if this allows you to print or if you have any other questions. If not, have a great day!

  If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.

  If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.

• HP Deskjet F380: HP Deskjet F380 software & Driver

  Printer HP Deskjet F380 all-in-one works fine on Windows 10. I was ale to use the HP Service Console to print, scan, etc. However, after the latest software and driver (exit 14) I can't open the Console from the HP Service. In addition, after installing the HP software does not recognize the printer and cannot print a test even page.

  To get out of trouble I did following:

  1. uninstalled and reinstalled HP Deskjet and Officejet full feature software and drivers - AIO_CDB_NonNet_Full_Win_WW_140_408-4; After (1) has not helped

  2 disconnected PC from the Internet, then repeated #1; After (2) has not helped

  3. software uninstalled, opened the file folder and delete all files from tem; range of printers HP F300, drawn to the list in the control panel. Reinstalled HP Deskjet and Officejet full feature software and drivers-AIO_CDB_NonNet_Full_Win_WW_140_408-4

  None of the steps above helped. When the Win-10 adds the printer the printer and the scanner work.

  However, the value of the HP software is that it allowed me to scan directly into the file in TIF or PDF format.

  Is this a known problem or is there a solution for the problem?

  Thank you

  Welcome to the HP community @theRodeo,

  I understand that you are unable to open the HP Solution Center, and I want to help him.

  Below, I've posted a document that offers solutions of troubleshooting on this issue. When you open the link scroll down to the section titled ""HP solutions Center can not run"or"Scan is busy or in use"error with a network-connected printer" Please try all the steps in order and get back to me with the results.

  HP printers - printer problems after upgrade to Windows 10

  I hope this helps.

  If this help will testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• HP Deskjet F380

  I have a deskjet F380 who gave me excellent service. 4 days ago it stopped talking to my computer or at least on the side of feeling that's as I can still scan documents in. I'm not particularly computer savvy, but I tried to reinstall the drivers and software that came with the printer. It can print a page of test manually, so it is obviously in full working condition and I lived the gamut of online help and he gave me :-) The LPT1 port is obviously working properly I can still scan and save documents, but I'm the Director of a local company and on the side of impression is the most important for me... Help!
  Dai Wright

  The suggestion of Jabzi below worked like a charm and I am eternally grateful, thank you very much.

• HP Deskjet F380 print really slow and ejects incomplete pages

  Hi, I have a HP Deskjet F380 all-in-one. It worked perfectly for months until this one day he started to have problems when printing. When I hit the button "print" the printer take too long to print and it is extremely slow, it prints a little then stops (20 seconds or more) then print more. Also my printer ejects often empty or incomplete pages. I tried different solutions. (1) uninstall/reinstall the driver for the printer 2) disable my firewall and antivirus
  4 reset the printer (unplug the printer power cord ecc..) 3) open the printer to check if there is something blocking the internal components 4) remove and reinstall the cartridges, clean the contacts of the cartridge and check the ink level 5) try using a different power supply from another HP printer. Nothing has fixed the problem. I ran HP print and Scan doctor but the test found no errors. I also tried to unplug the usb cord and print a self test page (press the button cancel + copy color button), but it won't work, so I have deduced that there is a problem with the printer and the questions were not related to my pc.
  I am running Windows 7 64 bit

  Any help is very appreciated!

  I solved the problem myself. The black ink cartridge was defective, I replaced it, and now my printer works perfectly!

• DESKJET F380 WILL NOT ACCEPT PRINT INSTRUCTIONS

  We have a HP Deskjet F380. Our operating system is Windows Vista Home Basic.  Just within the last week or two printer refuses to accept the printing instructions. I ran print and Scan doctor and tells me, that everything is ok. Print test page for doctor is also very good. However, the problem has not disappeared. When I try to print something, for example by email, the printer will not accept print mode.

  The only recent change in our systems, which may or may not be linked to this problem, is that we moved from BT Yahoo mail BT Mail about two weeks ago.  Help!

  Hi @hnforsyt,

  Welcome to the HP Forums!

  I understand that your HP Deskjet F380 won't print from Windows Vista, especially by e-mail. I'm happy to help you with this printing problem!

  Please have a look through this guide to printing, print jobs are stuck in the print queue. Because it takes into account the fact that the printer will not print.

  I hope this will solve your problem and have a nice day!

• DeskJet F380 print only page 1 - only when the first powered

  I work under Windows 7. I checked the toner level - not low; cleaning cartridges does not help.  When the power is turned on, the first page prints ok, not strong. The following pages, it acts like it is printing but prints pages white, totally clean.

  Thanks for your suggestions.  I wonder if it's time for a new printer.

  Pablu

  Hi pablu,.

  Welcome to the HP Forums, I hope you enjoy your experience!
  
  I see you are having some problems printing with Deskjet F380.
  I'll be happy to help you.

  I would disable all the start up programs to make sure that something in the background is not cause printing problems.

  Go to start, run, type msconfig, click on the Services tab.
  Click to select the hide all Microsoft Services check box.
  Click Disable all.

  Click on the tab at the top of the page, select Disable all the startup, apply, OK and restart the computer.

  Temporary disable all Antivirus software.

  Then try to print again.

  You will need to go back and allow all when done and turn on the Antivirus software.

  Let me know how it goes and we'll go from there.

  Thanks for posting on the HP Forums.
  Good day.

• Error scanning WIA for Deskjet Ink Advantage 2060

  I can't scan with a Deskjet Ink Advantage 2060.

  HP Print and Scan doctor said that the error is the Windows WIA. It says HP TWain scanning and other tests are fine, not that I know how to do a TWAIN scan with it.

  Reading another post, I can confirm that "detecting hardware Kernel ', 'Windows Image Acquisition (WIA)' and 'RPC Remote Procedure Call ()' is running in automatic mode in the services list.

  My printer reacts to an application to scan and seems likely to be an analysis sometimes, but the software seems to act as if it receives nothing back from the scanner?

  I've uninstalled and reinstalled all the drivers twice without success.

  Reading http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/cant-get-HP-Office-jet-to-scan/m-p/1785313/highlight/true#M41216

  I tried another USB on my computer, and hey presto! He works all of a sudden!

  Looks like the HP scanners cannot handle all USB connectors. Odd.

• HP Deskjet F380: 21B ink cartridge information.

  Hello Sir, I want to know is that HP Deskjet F380 is also compatible with the 21 b black ink cartridge? With which I have a plus of that query, what is the difference between a Deskjet and inkjet?

  Hello

  Your printer must be very old. Please check the following information:

  http://www.HP.com/pageyield/en-019/yields/DJF380_page.html?cCode=us

  Yes for 21.

  Kind regards.

• my hp deskjet f380 will not print my documents. What's wrong?

  It is a series of HP Deskjet F380. The cartridges are not low. The convenience store said make a default printer. That did not work. He suggested for me to do a group in order to make it work, and I know which does nothing.

  Hello
  Is this a new issue or a printer has never worked before? I suggest the support site and download the latest drivers for the printer HP visit.

  http://WWW8.HP.com/us/en/support-drivers.html

• All-in-one HP Deskjet F380: use of HP Deskjet F380 cartridge.

  I want to know if we can use a single cartridge in HP Deskjet F380, or use two cartridges at the same time?

  Hi @Shubhamp,

  Welcome to the Forums of HP Support! I see that you would like to know if you can print mode single cartridge with this printer. I would like to help you today.

  According to the manual, it does not indicate that you can simply use the cartridge in this model. The two cartridges need to be installed and work to continue printing with this model.

  When you receive a low-ink warning message, make sure you have an available replacement cartridge. You must also replace the print cartridges when you see has passed out in text, or if you are having print quality problems associated with print cartridges

  Source: Deskjet F380.

  Good day! Thank you.