Scan to network with OfficeJet 6700 Premium

Hello

I want to scan from my OfficeJet 6700 Premium on a network share on my NAS.

So far I was only able to scan my computer where I needed to install a pice of software. But I want to scan directly to the network share without count it in the middle.

Thank you

Mark

Hello B7i,

Welcome to the Forums of HP Support! I understand you want to scan to a shared folder (SIN) with your HP Officejet 6700 Premium. After watching the 6700 product specifications, this isn't one of the characteristics of the 6700 JO scanning, scanning capabilities include scanning to USB and PC key only:

That being said, you need to use the computer. Have a look here in your user's Guide on Page 38, it gives you all the scan options.

I'm sure you already know what options you have in the front of the 6700 but for later use, I'll leave that for you: the façade scanning options

I hope this helps!

Thank you

Tags: HP Printers

Similar Questions

  • Bad impression of colors with Officejet 6700 Premium (networking)

    My OS is Windows 7 with all updates in place.  The printer is about 2 years old and, so far, gave good served the printer comes to download an update, but I don't know if my problem is due to this update or something.  I had recently installed a new cyan cartridge.

    I printed a picture which contained a lot of blue sky, clouds and a few dark green landscape.  Printing which gave me a very pink sky without the slightest trace of blue.  The landscape was very dark and could include some green but I can't say for sure.  A picture of a yellow yellow finch missed and the blue sky was swept away.  The printer indicates that the blue and yellow cartridges were low so I replaced to ensure that there is wrescie of ink to create my sky.  I printed the pages to test several times.  Four color "chips" appeared as follows: (1) bluish-purple, (2) rose, (3) orange and (4) completely black, but the lighter shades of black were more purple than the gray.  In summary, it seems that I do very little green or yellow to make ink.

    I worked my way through the help desk services, aligned and cleaned the heads a couple of times and checked for updates of pilot with no significant improvement.  Convenience stores to say there is no problem and I am running out of ideas.

    Bob

    With apologies to all, I have solved my problem.  Looking at another forum I found out that the 'heads' are not part of the cartridge (I think they were once).  After you put new cartridges in I assumed that a standard cleaning pass would be the point.  Another reading (or smarter reading) manual convinced me to try to clean again.  This time, the first "chip" color is much bluer than previously and the fourth "chip" was brownish instead of purple.  I ran the second head cleaning level and first bullet showed shades of blue and shades showed fourth green.  A test print of a landscape photo came out with a beautiful blue sky and greenery in the foreground.  So all is well with the universe once more.

  • Able to print not scan over network, with Officejet 6500 E710n-z

    I tried with and without wire.  Printer was not detectable when connected wireless.  WLAN in wireframe, but can not scan from my office.  It gives an error of communication.  To print.  Tried with firewall disabled.  No chance!  Help, please.

    I solved it by turning off all computers, printer, router and modem and turn them then turn it back on.  It worked and now it works fine.  Thanks for your help...

  • HP Officejet 6700 Premium: Don't scan and the scan dialog box will not open

    Since I upgraded my computer to Windows 10, I'm unable to use my scan on my HP Officejet 6700 Premium function.  I can't even open the scan dialog box to look at the options etc.  I tried to find 'Scanner and printer' in painting, but it does not recognize.  Any suggestions?  I already deleted the printer and re-installed.  It was working fine before on Windows 8.

    Hello

    Thank you for using the HP forum.

    You can download and install the software COMPLETE features of HP printing for your operating system:

    http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-6700-premium-e-all-in-one-printer-series-H711/4322971/model/4323605#Z7_3054ICK0K8UDA0AQC11TA930S6

    Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

    Hope that helps.

  • Issue of SCANNER (HP Officejet 6700 Premium)

    I have a HP Officejet 6700 Premium.  I use a MacBook Pro with OS X 10.9.2 Mavericks.  The printer is connected to my wireless network.  When I scan from the printer itself and send it to my wireless computer, scans will be saved in the folder "Images".  How can I change where scanned files are sent continuously to?  I have a calle "My Scans" folder on my desktop thaty I would like that all my scans to get sent to.  I can't understand it.  I searched other discussions on this forum and none seem to answer that particluar for this particular printer for this particular operating system.  Any help would be greatly appreciated!

    Hi felipestrong,

    Thank you for visiting the Forums from the HP Support! I see that you are interested in saving the scans of your HP Officejet 6700 Premium to a specific folder you created, where default instead in the pictures folder. You are using Mac OS 10.9 and scan wirelessly from the front of your JO 6700. Please follow the steps listed below:

    1. go into your option to GO in the top left corner

    2. go to Applications

    3 select the Hewlett-Packard folder

    4. Select utility

    5. under the scan settings section, select scan to computer

    6. in the lower right corner, select Edit analysis jobs

    7. Save to the Pdf format (documents) or Jpeg (pictures) - whichever you prefer

    8 scroll to others to locate the scan my folder created

    9. press Select , and then tap OK

    Now when you scan from the front panel of your 6700 JO, your scans are saved in the folder you chose.

    I hope this helps!

    Thank you once again,

  • HP Officejet 6700: HP Officejet 6700 Premium all in one network problems

    Printer = printer HP e-all-in-one Officejet 6700 Premium
    Model = H711n
    Number of product = CN538A
    Firmware version = MPM5CN1450AR
    Location = Ireland
    Printed pages total: 152
    Scanned pages: 58

    Other details available on request...

    I've had this printer for several months now, I have had no problem connecting to my wireless network and connect computers, telephones and other equipment to this.

    A few days earlier, when starting the printer display flashes with the useless error message, error in the printer, turn the printer off and back on.

    I have power cycled as requested and received the same message, over the power of the cycle he mentions turning off the power button and no DISCONNECT of the sector. Until then I had never disconnected from the sector. After that I have several attempts to power cycle the printer is off and removed the sector, has waited half an hour and powered on again once.

    Still stuck in a loop. He also briefly flashed a blue screen with the error B81431CB. So brief that it is almost useless. I had the boot sequence video and pause playback to read error!

    After some research, I decided that she was experiencing problems connecting to the WIFI network. So, I turned the wifi on the router and the printer network started as usual. Internal menus are now available and I can print status and so forth, so at this point I can exclude defects of ink or mechanism.

    I went in on the printer network settings and reset the network. I'll also through the printer to factory default settings. I have reactivated the WIFI network to the router then went to install the printer again. Digitized for wifi networks and found mine. Entered the password for wifi and the printer could not connect. Everything is good, correct ssid, signal. Report shows wifi password is incorrect.

    I have try several times to connect wifi password is certainly correct, but the printer refuses to recognize the correct password. I tried a different router, the same result. Says incorrect password. Also I tried WPS and a PIN, said still fails to connect.

    At this point, I have disabled all security on the wifi network. Bingo, printer connects to the network, but starts with the loop of error mentioned at the start of the tour and turn it back on. This above has been tried several times, the factory reset, everything ok, turn off the wifi security, the printer connects and goes in a loop.

    So, at this point wifi is confirmed to be defective. I decide to directly connect a LAN cable. Once the LAN cable is connected, a few seconds later the printer detects the network and goes back into its loop error. It will not just connect to a network via wifi or LAN. He previously worked on the network, and nothing has changed on the network, not new parameters or no new devices.

    I connected a laptop to the printer via USB and that seems to work ok, but a USB connection is not ideal and defeated the convenience of a wireless printer. I also tried to reflash the printer in case there is a corruption of the firmware, but the utility detects that the latest firmware is installed and that it is not engaged.

    Now...?

    OK I managed to make it work and I will try to explain the steps of my best.

    As mentioned previously, I tried another router, I tried the wiring, and I tried to reset the router and the printer. Nothing seemed to work.

    Out of curiosity I just put my phone in a WIFI AP. Tried connecting the printer and it worked. The printer connected to the WIFI phones.

    So I know that the printer works on at least one access point.

    Thus, in the settings of the router and firewall. The only thing enabled in the firewall have been

    IPv4 firewall protection

  • OfficeJet 6700 Premium: after Windows 10 Upgrade on Officejet 6700 scanning does not work anymore - can not find scanner

    Hello

    Having finally decided to take the plunge to upgrade to Windows 10, I discovered that my Officejet 6700 Premium previously peripheral work will scan is no longer.

    My connection to the device is via a wired connection with a static IP address on the printer. It all worked perfectly under Windows 7, but now, I can only print to the printer to win 10.

    I tried to uninstall the previously working software (under Win 7) and downloaded the latest version of the HP (OJ6700_1315 - 1.exe) software, which BTW is not a patch on the previous software that I'm used to using - but it did not help. Still no joy with the scanning feature.

    I tried to uninstall all software, so I tried to launch the Wizard installation HP which seemed to re - install the last set of software (as above) with the same results - I can print it, but if I try to scan using the Officejet 6700 App it appears a dialog box saying "inaccessible Scanner. Scanner communication cannot be established. Make sure that your product is powered, check the connection and esnure that your network runs correctly. ...".  Amazing result given that the application displays all levels of printer ink, and I can print - every time!

    I tried disabling the firewall - no difference, still do not see the scanner.

    Tried using other windows applications; Paint, etc. - no joy.

    I also tried the "HP Print Scan doctor and" nothing does - even, he gives up and says to contact HP support, with no details about what to tell them!

    I hope someone else out there could have had the same problem and found a way to make it work?

    Thank you!

    Ok

    In case anyone is interested, I bit the bullet and did a new install of Windows 10 on a formatted drive. I then installed the same software that I had tried on the "upgrade to Windows 7" windows, 10, and everything works as expected.

    Therefore, there is definitely something wrong with the upgrade process, and the removal of the HP scanning software & resettlement never did his job correctly.

    I look closely at the list of DLLs etc., charged by the printing software, but could not detect anything immediate.

    Then, certainly in my case, a new facility was to solve this problem.

    See you soon,.

    Dazz

  • OfficeJet 6700 Premium e-all-in-one software limited scanning or it can be used via Photoshop?

    Hello...

    I use the HP Officejet 6700 Premium e-all-in-one Prod # CV078A on a Macintosh OS 10.6.8 macbook Pro (2.8 ghz Intel Core 2 Duo - 4 GB of DDR3 RAM).

    I try to run for the first time since that I recently bought this machine, and I'm running into some problems of quality. Digitization of works very well once I thought I had to use the utility software of HP scanning rather than access the scanner by Photoshop as I always had done before with my HP's Photosmart 2600 (I had for 5 years and more).

    The scanner HP scanning software (HP Scan v3.7.9 (59)) seems very limited.

    My questions are:

    • Is there a way to browse from Photoshop (or CS3, 4, 5 or 5.5) TWAIN instead of use the HP scanning software?

    • It is there no quality of analysis options other than a few easy turns, cultures and the very limited color correction, as well as certain preferences that allow adjustments to size/dpi of glass. What about scanning at larger percentages, Descreening and some more detailed agjustment image options?

    Thanks in advance.

    You are welcome

    As a general rule, the latest HP Scan 3 of the other less editing software options than previous versions of HP software.

    You can set the color settings by clicking the setting icon (). Cropping or rotating of the analysis can be done, but there is no option of resizing by the software.

    All image editing must be done with any photo editing software.

    Kind regards

    Shlomi

  • HP Officejet 6700 Premium: Unable to connect to the new network HP 6700

    I just changed networks and want to connect my HP Officejet 6700 Premium to the new network.

    In the control panel of the printer, I accessed network / Wireless Installation Wizard.  When I do, I get the message:

    Locking function

    This feature has been locked by your system administrator or the person who set up the printer.

    There is an OK button, but no other options.

    I get the same message when I tried to access a WiFi Protected Setup, and, for good measure, the default system restore.

    There is no administrator, in itself, because I'm the one who has set up the printer.  I'm rulnning a MacBook Pro on OS X El Capitan.

    Please, help me to know what I need to do to connect my printer to the network so I can print.

    Thank you very much for taking the time to answer and especially for providing additional resources should what was being offered as a solution to not work.

    I have tried your solution several times and kept getting the same message.  I tried shuttig the printer off by pulling on the power cord, stop in the right way, reverse iin, etc..  Nothing removed the error.

    Then I took the printer to a local Best Buy to show them the problem, which was at home.  We tried it a few times, and then, for no reason whatsoever (seems), it allowed us to do a reset.  No one knows what was different.

    My advice for anyone with the same problem is completely unplug it, let it sit for a while, keep trying and hope for the best.

  • HP Officejet 6700 Premium: Scan function screen does not come to the top when selected

    After updating Windows 10, the scan function when selected in the application wizard does not come to the top. Installed the driver updated, no effect.

    Hello

    Thank you for using the forum.

    You have downloaded and installed the FULL features of HP software?

    Here is the link for convenience:

    http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-6700-premium-e-all-in-one-printer-series-H711/4322971/model/4323605#Z7_3054ICK0K8UDA0AQC11TA930O2

    We suggest that you uninstall the current drivers before reinstalling the software downloaded full of features.

    Hope that helps.

    Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

  • error message unable to copy or scan HP officejet 6700 Premium

    I get an error message on my HP Officejet 6700 premium that it is impossible to copy or scan.  How can I fix this problem?

    Thank you.

    Gail Holcomb

    Yes I see! I'm glad that you solved the problem!

    Please post back however if there are ongoing problems.

  • OfficeJet 6700 Premium AiO: Copy and scan simultaneously

    Good day to all,

    I was wondering if my Aio Officejet 6700 Premium E supports simultaneously copying and scanning. As I need to have a paper copy of my report in my patientfile and I also want to do a backup on my hard drive digital camera.

    Thank you in advance for your time and wisdom.

    Greetings,

    Michael

    Sorry, no.  The 6700 Officejet cannot copy and scan in a single operation, you must run the original twice now, once for the copy and one for the scan.  You can consider scanning to a file on your computer, then print this file.  This would confirm the paper copy will match the scanned document and would take only a passage from the original by the document feeder.

  • OfficeJet 6700 Premium: Unable to connect to the server

    I used my 6700 for almost a year and a half to work on a secure server of company where I couldn't use many features. I recently brought home, and now I use it on my personal network of houses. I followed the instructions on reprint the code of request but were unsuccessful. I constantly get a message that my printer is unable to conect to the server. My network wireless printing has been set up and I was able to print from my phone, laptop, & office. Can someone help me please my claim code?

    Hey @bhigh904,

    Welcome to the Forum from HP Support.

    I see that you are unable to activate the services Web on your HP Officejet 6700 Premium e-all-in-one printer. I would like to help.

    When users encounter this type of problem, I usually suggest from scratch with the radio of the printer and webservices configuration.  You can clear all of these parameters in a swoop by the factory default restore * your printer.

    Here's how:

    * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information about custom addresses ePrint, click here.

    • The printer's front panel, press the Setup/key icon and then tap tools
    • Select Restore to factory settings

    Then, touch the wireless icon () and run the Wireless Setup Wizard to restore your network connection.

    Make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

    • Enter the printer's IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer) and press ENTER to go directly to this page.
    • Click the network tab.
    • In the submenu on the left, click Networking.
    • Then click on the network (IP) address.
    • Click Manual DNS server.
    • DNS preferred as 8.8.8.8 manual entry
    • Auxiliary DNS server entry as 8.8.4.4
    • Click on apply to finalize this change.

    Then, press the icon of Webservices () and reactivate your webservices (necessary for scan to e-mail, ePrint and other features).

    Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem and that you liked this post, feel free to give me virtual accessories by clicking on the 'Thumbs Up' icon below and by accepting this solution.

    Thanks for posting in the Forum from HP Support. Have a great day!

  • Ghosts on pages double-sided printing second on Officejet 6700 Premium e-all-in-one

    Please can someone help?

    Printer name model e-all-in-one Officejet 6700 Premium

    Firmware MPM3CN1232AR

    Software 028.000.1315.000

    Driver 09.84.00.1173

    Win 7 SP1 64 bit

    Wired ethernet connection

    Problem

    On two-sided printing, the second side of printing on all pages is ghost. This is in particular the noticebale on verticals.

    This is true for all the qualities of printing on any documents .pdf or. doc.

    I use all the HP printing paper and original cartridges.

    I aligned the print head and checks suggested on the help pages.

    I contacted HP support, which were brilliant and replaced the printer and the duplex unit.

    They suggested that it was because I was using Office 2003 SP3 and Windows 7 but I find this problem on too but not in Wordpad v6.1 .pdf files

    The problem does not occur when scanned or copied documents are printed

    Is there a solution out there on this new printer please?

    Hi 007OHMSS,

    I carefully read through a VionAiry pointer to the post of ItalSanif with links to more articles.

    There were two main suggestions as to how to proceed. I didn't uninstall the "bloatware" and back to base for the HP Officejet 6700 Premium drivers, but I installed the drivers from the series HP Deskjet 6980 in accordance with the procedure at this link http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-7510-Duplex-Problem-y-axis-scaling/td-p/1754773 and listed below, with a few mods to include activation of unit duplex in one set of instructions.

    And you know what? This MARKET! Ghosting on the second side of all pages printed double-sided disappears to be replaced with a nice crisp clear impression. At present, all the other functions, including scanning seem not affected and function as usual, although of course the new driver (HP Deskjet 6980 series) makes the leaves of different properties.

    In my environment, I have also 3 XP machines in network connected wireless to the printer via the router and the PC Win7x64 connected by ethernet to the same router. Meant this download and the installation of the driver HP driver the HP Deskjet 6980 series for the XP PC Web page not the Win 7 x 64 because they were not present.

    I modified a bit routine and reproduce it below to help others. A/c for the original post, that was provided by the HP Technical Support. Why nobody's support services seems to know about or drivers have not been fixed I would never know.

    First turn off you will want the printer already available on the computer before you continue.

    For Win7 PC (XP is similar but not identical)

    1. Go to Start -online device and printers => then click on the "Add a printer" button in the upper left corner of the device window.
    2. Click on the button "Add a local printer" (choose this option if you do not your configuration)
    3. Check the box "use an existing port.
    4. On the drop-down list, select the option for example CN115130TP05JW , but use the correct name for the PRINTER port which is the serial number of your printer (do not use the fax entry)
    5. Now in manufacture of list on the left, select "HP".
    6. On the list of Printers to the right, select "HP Deskjet 6980 series (HP)" "
    7. "Once the pilot moved to enter in the" 'devices and printers ' window and right-click the newly added "HP Deskjet 6980 series" and select ""printer properties ' on the drop-down list. "
    8. Go to the "Advanced" tab, and then in the drop-down list next to the label of "Driver" select "HP Deskjet 6980 series.
    9. Click on the button 'Apply' - the configuration window should change it's shapea bit.

      10. in the HP Deskjet 6980 window properties, click on the tab "device settings" on the top of the window.

      11. in the list of parameters, search for "Unit duplex (for printing on 2 sides) ' and select it.

      12. once highlighted, select in the drop-down list ""Installed "; "

      13. When finished press apply

      14 now, go to what you use to print documents and select "HP Deskjet 6980" as your printer. Activate duplex printing and you should see the pages to print correctly.

    15. you can also change the name of the printer in the "Général" tab I changed it in mine to "HP Officejet 6700 with HP Deskjet 6980 pilot set shadowd duplex printing".

    I had a little problem in that, for some reason any in the document (e.g. Word / etc\ .pdf) box under the effects tab my radio button has mysteriously been on 20% until I changed it it was hard to see that there was no ghosting dialogue printer properties.

    So after complete 1 reconstruction of the printer of the original with the parts sent to HP services support for November 2012, an escalation at magnifications greater within HP (no answer) and a new printer of A...n, VisionAiry has pointed me to a solution that I had tried with DJ 450 drivers, nothing works, after a Shane_R post dated last year.

    So thanks to you and also to 007OHMSS who worked on this problem and original posters

    All I can say is that it worked for me and I am so grateful to everyone on this forum to ensure that I am sure of my eyes and mental health, looking more printed duplex printed with a shadow/ghosts and to be what they were not prepared.

    Congratulations so all round and thanks again

  • OfficeJet 6700 Premium: Officejet 6700 Premium - Support for direct printing HP (Ad Hoc) wireless

    Please can someone confirm if you can set the to either ad hoc printing or using HP Officejet 6700 Premium Wireless Direct. I can't find anything in the user manual.

    The situation is that a friend has just moved into his own office with a connection high speed standard with a wireless router, in 'Serviced Offices'. These connections allow broadband to the office and he has to pay for a dial-up connection to the internet.

    So he paid for two ethernet connections which probably come out through internet gateway of the complex. However, he lost the ability to print at its 6700 HP that has been previously set up wireless. He tried to install the printer using infrastructure mode by connecting to the network without wire of the complex, but still can not access the printer. It could be that the wireless network is on a different network for LAN connections segment.

    The only solution I can think off is to let each PC with ethernet for Internet connection and install a wireless dongle in each PC to connect to the wireless printer. However, as noted above though I can't find the instructions for the Officejet 6500 to print Ad Hoc has nothing in the manual for the 6700.

    Is this possible?

    Fozzie

    ShlomiL wrote:

    Hello

    To clarify, the printer will support HP Wireless direct however with its latest firmware installed.

Maybe you are looking for

  • Gmail stuck on loading.

    Hallo, Gmail wont fully load on Firefox. It stucks at 90% and stays there.I deleted cookies, install uninstall and I disabled 1 extensions I had.still does not load.Any idea guys? Thank you

  • from different firefox profiles

    Wonder if I had similar problems (bug) when I used a new profile of costs. So I created a. I have the same problems with the new profile. My new question is how to make firefox ask me whenever the profile I want to use when I open it. I changed don't

  • YouTube crashes Firefox instantly - and I mean instantly, hardware failure

    Under Firefox 3.6.3 openSUSE Linux 11.0. Have re-installed twice, including completely deleting the .mozilla profile. No effect. By clicking on the Google youtube address will IMMEDIATELY crash Firefox completely. I have blocked all cookies from Yout

  • Unable to connect satellite Pro 6000 network

    I would appreciate help on this. We have a Toshiba Satellite Pro 6000, which we assumed is active wireless. But when you turn on the wireless switch, there is no answer and the laptop will not come to look for me or any other network. I was able to c

  • 485 USB connection for single device

    Hello I need to make a very simple connection, but even if I search in the forums and manuals of days I can not yet understand how do. Maybe someone can help me, it's here: I need a «compatible with RS485» actuator control The manufacturer gave me th