Scaning
I use windows 8 prevew I have deskjet 3070 conecting wireless, as a thing of evry printer is OK, but the computer can't find it as scanner, what shuold I do. Thank you
Here is my answer to a similar question that was asked earlier: http://goo.gl/KgOzJ
Basically, Win8 preview isn't Win8, not the whole thing. Because of this, there are many things that do not work correctly on this OS. Unfortunately, with most of the printers are that you will have the drivers in OS install giving you the ability very limited to only be able to print.
You will not be able to access your scanner unless you also set the printer wireless as well as via the USB port (for printing). If the printer is wireless, you can use the IP of the printer in the address bar of your web browser to access the built-in web server.
On the "Scan" tab here, you will have the option to webscanning which you can also save.
I hope this helps!
Tags: HP Printers
Similar Questions
-
Hi, im changing a sheet with writing on it (true leaf scaned) it's an old technique (90) and I wan't the color of my text to be the same as in the worksheet (color is spotted with black and white noise) as you can see...
Add a new layer above your text. Fill it with 50% gray. Add a bit of noise:
Set the blending mode to lighten:
Add a Gaussian blur to match the other text:
Usage levels to set the contrast:
-
I see lines on my Apple Pro Res 422, shooting Sony A77 scan monitor. It happens to all my computers.
No idea, thanks.
This happens in all sequences? It shows that if you play directly from the camera to a TV? If the answer is Yes, it points to a problem with the camera.
Or do you see it in a piece of footage? It could be due to a problem with the lighting. It is almost impossible to tell from the picture you have posted. Could you put a small portion of the video shows the problem somewhere so that we can see it?
-
Hello
I'm looking for a solution as a way to use the scan of my Canon MX926 printer/Scanner/Fax function.
I printed and scanned documents, with number, over the past 18 months. The MX926 is connected to my network via Wi - Fi and shared with a MacBook Pro, MacBook Air, and a Windows PC. In the last 24 hours, something has changed; my MacBook Pro can scan is no longer the MX926. No error message or of any sign of fault, my MacBook Pro simply ceased to recognize the part scan of the MX926.
I believe that the MX926 is not a problem because the scanning function still works with my Windows 10 PC.
A reinstall of the MX926 has partially solved the problem; while I can print, I can't scan. A diagnostic analysis of my MacBook Pro gave rise to a certificate of good health.
My MacBook Pro is a retina, 15-inch, mid-2015 model year.
I apologize for being light on diagnostic information, as there is almost nothing to offer; one minute, I could scan through my MacBook Pro the next day that I couldn't.
Any suggestions on how I can fix this?
Thank you
HILO2016
I'd recommend downloading fresh drivers from the Canon Website, but there is not all available downloads for your printer that is compatible with El Capitan v10.11.4 > http://supportdrivers.info/canon-pixma-mx926-driver/
Alternatively, you can use the OS X Image Capture in your Applications folder.
-
Want 7640: Scaning is ADF scan side so many general issues
The ADF analysis both paper size? Can I use glass scan to scan both sides of a document? Digitization program analyses multi. Scan many pictures and she's going to crop? Can faxing double size pages? The printer has an automatic paper sensor? I read in the spec that there autmoatic detection paper online. Whenever I put the paper in the tray paper he always asks me what type of paper and if it have an automatic senser of paper, I think it would feel what kind of paper, she has when she about to print.
Hello
Thank you for using the HP Forums.We will try to answer each question at a time:
1 - is the ADF scan both paper size?
No, the ADF scans Simplex - i.e. scans one side at a time.
2. can I use glass scan to scan both sides of a document?
Yes you can use glass to scan both sides, but to do this, you will need to analyze 1 side (part 1) at the time, and then return the document to scan the 2nd face.
3. the scanning program analyses multi.
Yes, if you have installed the software FULL of features, you can use the ADF to scan a multiple page document.
This relevant resource will show you how it's done.
Scanning multiple pages using the ADF and glass Scan
4 scan a lot of pictures and it will be their crop?
This relevant resource will show you how:
5. can fax? double size pages
Yes, you must scan (fax), a face and then analyze (Fax) the 2nd side.
6. the printer has an automatic paper sensor?
The automatic paper sensor detects if there is a paper in the tray. It is unclear what size/type of paper is inserted (where the prompt on the type of paper, etc.)
For use digitization of resources (in particular with the FULL features software), you can check this link:
Hope that helps.
-
Scaning several pages in a single file on a 4630
Using printer HP 4630, windows 8.1, free Wi - Fi.
You want to scan multiple pages into a single file.
By the user manual, I work from the computer not the printer.
When the first page is scanned asks me if I want to save, I click Yes and the filename.
When I scan second page still wonder if I want to save my file name is, I like it already exists and asks if I want to keep or replace it.
Whichever one I click, only the second page is saved.
What I am doing wrong?
Question: How to scan mutiple pages in a single document?
Hello
Before clicking on save, you see a plus (+) sign (left). Please click to add the page 2 then 3... and save at the end.
Kind regards.
-
Recently whenever I start the computer a program named Mac cleaning charge, stat my scanning system and ask to activate. It looks like a third party program that I should pay. Is it an accredited program for mac. If this is not the case, how can block this load upward.
Is it called Advanced Mac Cleaner? If so go here. http://AMC.Kayako.com/Knowledgebase/article/view/4/0/how-to-uninstall-advanced-m ac-cleaner
It is malware.
Edit: See post of Linc Davis on this topic for more detailed information.
-
Can you recommend a package of e-mail which will allow me to scan directly to him with my new all-in-one printer to 2130.
Thank you
Hello
Have you tried the following?
http://www.softwareok.com/?Seite=FAQ-Windows-10&FAQ=64
At home, for a printer, I use Outlook as my default package but on other printers I use normal email Yahoo to send directly from printers account, use only computer not at all.
Kind regards.
-
HP LaserJet 200 color MFP m276: HP LaserJet 200 color MFP m276nw - scaning problem
Dear gentlemen/ladies, Documents on the flatbed scanner / / UH m276 Color MFP HP LaserJet 200 cannot be scanned in the network folder, scanner, in my office by WiFi. He keeps giving the error message "username or password is incorrect. This user account and password are valid. "Please note that the wireless test is successful. A such problem, until the desktop computer (some bad sectors on the hard disk) has been repaired at the shop of the computer a week ago. However, I can use apps in my office to print and use the HP LJ200 M276 Scan to scan documents on the printer tray and save it in any folder remotely via WiFi. Please please advise solution/method that I can do to solve this new problem. Stephen
Hi @U-Talents.
Welcome to the Forums of HP Support! I read your post and see that you are not able to scan to network folder. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.
I have provided a document to configure the scan to network folder. Follow the steps, there is a section to create the folder and set up the sharing and security:Scan of the control panel (including Scan to Email, in PDF format, and to a network folder) for HP LaserJet Pro 200 Color MFP M276n and M276nw.
This post is @wardell1, it can also help with this error message: try to configure the scan to network folder, name of user and password is incorrect. Do not take into account the model.
I have also provided a @ShlomiLstation, on the same issue: scan to network folder fails.
Try these documents to see if they help, and if there is anything else I can do, let me know. Thank you.
-
MG52050 code error 5, 202, 54 with scaning
All of a sudden, I get an error message with my scanner. Code 5, 202, 54.
My printer still copy and print, but will not scan. I have not changed anything. I am uing Windows 10.
My printer is acanon MG5250
Tried to reinstall, followed the instructions on http://community.usa.canon.com/t5/Printer-Multifunction-Support/PiXMA-MP250-scan-error-5-202-54-Prin...
still does not work
Oke... It's weird... I solved it.
How? restart the pc save modus. removed the old software. reset
Unplug all cables, installed the latest version of the software, plug in, reboot and it worked!
-
problem scaning hp4500 officejet g510g
I have no hp Solution Center
Hello
Download your OfficeJet of Windows XP driver on the site below and install it to solve the problem.http://www.siliconguide.com/drivers/device/1832/Thanks for your time, I hope this has helped.-Ian -
OfficeJet Pro 8699 scaning over 5 pages at a time?
I have this versatile machine and I can't scan and send more than 5 pages at a time. It will SCAN, but send me multiple messages in 5 pages each. My office neighbor has the same machine and can scan many more pages I can, it just scanned 30 pages and it came to pass in an e-mail. We cannot find the setting for this, can anyone help?
The firmware update can help, you're under Windows? Use this: http://ftp.hp.com/pub/softlib/software12/COL41945/bi-101905-5/OJP8600_N911a_R1322C.exe
-
Lexmark X 9575 scaning questions
I just bought a new envy with Windows 8.1. My Lexmark X 9575 all-in-one printer will print but not scan. What can I do to solve this problem. This new Windows 8 makes everything much more difficult to do. My old system is Windows XP.
Thanks for your help, but the site you sent me says that there is no support for my X 9575. That's what hurts the most on this 8.1. Many programs does not yet work with it. I'll call Lexmark Monday.
-
error message: create a new profile in the mail icon in the control panel.
never done befor why now?
Or you can simply create a new e-mail message and then drag files on top of the new message and it will tie them.Stevewrote in message News: * e-mail address is removed from the privacy *... error message: create a new profile in the mail icon in the control panel.
never done befor why now?
-
I'm trying to interface a new HP laptop that has a 64-bit (HP Pavilion dv6-701) operating system and running the operating system Windows 7 on a HP All in one series F310 printer / Scanner
HP staff helped get printing to work via a 6980 HP printer Driver software download, try to download the software 310 driver didn't work so we tried this driver 6980 credits and print function works now
However I can't scan a document on the laptop of the 310, when I attmpt one scan, I receive an error message
Given that the printer uses a generic driver and is not a software that is supported on Windows 7, you can scan only programs such as paint, Windows Fax and Scan and image viewer.
Maybe you are looking for
-
What is error 29
-
Equium EA90-128: memory expansion
Realizing that I need to improve my memory of 256 MB at least 512 MB I decided to look for memory DDR suitbale. I know I need memory SODIMM PC2700 but not only am I confused on the opportunity to buy a 512 MB module or two 256 MB modules but I can't
-
How to switch between 0 v and 5 v using the FTDI USB-to-TTL converter?
I have one of these (TTL-232R-5V-WE) FTDI (http://www.ftdichip.com/Products/Cables/USBTTLSerial.htm) and it came with a few screws to control the USB converter. However, I do not know how to exit (between Vcc and Gnd) 5V to 0V. Basically, what I need
-
Print jobs stuck in the print queue
Original title: printer print the print job into quene prevents the print job Printer stop troubled Print print job in quene prevents printing
-
Original title: I see all the hard drive under Vista I see on the C drive properties"space used = 143 GB ', and""494GB of free space. But, when I try to do a third partition to install windows 7, using the disk management tool, after I click onshri