Scanner Canon CanoScan LIDE 200 works, MP Navigator EX 2.0

Canon scanner CanoScan LIDE 200 works, mænd program MP Navigator EX 2.0 is op of hold that work, which has afinstaleret the and gen installed, a God until for a few days ago, there is no Ude which can help with works Igen MIG, pa advance tak


Hello Erik,.

Please select your language by clicking on the globe on the page down to the left to post your question in the language of your choice. If you can't find the desired below language, support for additional international sites options are by following the link below:

Tags: Windows

Similar Questions

  • Canon CanoScan LIDE 200 scanner not more known with the upgrade of the El Capitan

    Using my scanner USB Canon CanoScan LIDE 200 throughout the years that

    camera seems to no longer work after upgrading to El Capitan.

    The USB device ID is:

    Bus device 250 007: ID 04 a 9:1905 Canon, Inc. CanoScan LiDE 200

    What can I do to re - activate this device?

    Thanks for any help!



    Try VueScan

  • Driver USB PC/MAC Scanner Canon CanoScan LiDE 20 48-bit

    Can I install Windows 7 Professional 32-bit update and use this device?  It's supposed to be compatible with Windows 7 32-bit but not 64-bit.

    If so, I have to choose to upgrade to Professional or invest in a new scanner (~ $55)

    Thank you


    Canon drivers are 32-bit only... BUT

    VueScan will allow you to run your Lide 20 Windows 7 64 bit...

    You can run the test first. I want to keep my Lide 30 running W 7 64. The Lide 30 has no Windows 7 support all Canon...

  • Het expensive Canon CanoScan Lide 60 moet ik een toepassing maken Hoe dat works

    IK heb het besturingsprogramma van een Canon CanoScan Lide 60 van site gedownload van, maar ik moet een toepassing maken om het expensive gun you use. Hoe dat works?

    IK heb het besturingsprogramma van een Canon CanoScan Lide 60 van site gedownload van, maar ik moet een toepassing maken om het expensive gun you use. Hoe dat works?

    Check with your manual Canon CanoScan Lide 60. Search, address, telephone number or Web site where you can get technical support.
    If you don't, here is a link where you can start clicking where you are and it will lead you to the site of the Canon Support in your country.

    Neem contact op put uw in Canon CanoScan Lide 60. Kijk voor het adres waar u technische support location site number.
    ALS I niet vinden good, yesterday is een link waar I moet door start you will op waar u bent het zal leiden tot een van uw support site Earth Canon u.

  • How to scan multiple pages into a single document using the CanoScan LiDE 200?

    How to scan multiple pages into a single document using the CanoScan LiDE 200?

    I can't find a way to get them to analyze all the time, or a way to put together them later.

    Hi dagda24,

    You can scan multiple pages into a single document with the scan PDF option.  Use the following steps to do:

    1. open MP Navigator.

    2. click on a Clcik.

    3. click Save to PC.

    4. change the Type of PDF file to PDF (multiple pages).

    5 other changes, as needed, and then click Scan.

  • CANON Canoscan Lide 500F Scanner USB with Windows 7 64 bit

    When I try to operate this scanner by pressing the scan on the scanner, Service Image Acquisition Windows tells me "there is no application registered for this event. The scanner using Canoscan Toolbox is recognized in the select the Source area, but when I press "select" I get "unable to select TWAIN source". I saw a lot of people have already had this problem but I have not seen a solution that works for me.

    BTW this mixture of languages bothers me a lot. Although my Windows 7 is installed in English, and although the English (US) is defined as my main input language, some programs insist to settle in French. I guess that's what we call "smart" software Sometimes I hanker after the silly software from the old days. :-)

    I would be grateful for any help.


    Please follow the steps below.

    Method 1:

    Uninstall the printer software.

    Method 2:

    Download and install the Twain driver from the link below.

  • 64-bit driver for scanner Canon Canoscan 670u

    I recently bought a new computer with Windows 7. When you try to install my Canoscan 670u scanner, no TWAIN drivers were found. On this site I found and successfully installed a driver 64-bit for this scanner that someone else I work for the same scan in Windows 7:
    I restarted with and without the scanner is plugged, but I always get the message that no driver is installed. In the device, clicking Properties, on the Canoscan Device Manager: the drivers for this device are not installed. (Code 28).
    Any help on how to proceed now would be much appreciated.

    Hi hmarcuse,.

    Your scanner is not compatible with Windows 7:

    I hope this helps!

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Canon canoscan lide 60

    How to insyall my canoscan lide 60 scanner on window7 64 bit

    I tried and got a message saying scanner was a 32-bit


    The correct software can be found here:

  • Canon CanoScan LiDE 20 64-bit drivers.

    I have scanner CanoScan LiDE 20 Canon that I can't use because I upgraded my system to Vista 32-bit to 64-bit Windows 7. Is there a solution to this problem, as canon dose not provide drivers for this scanner 64 bit.

    N ° switch to Windows 7 32-bit or download a new scanner.

  • Canon CanoScan LiDE 30 48 bit USB PC/MAC Scanner

    Does anyone know of a fix to allow me to use the CanoScan Lidfe 30 with my Windows 7 PC?

    There is workaround to VueScan 9

    It works well according to this Canon Scanner incompatible with Windows 7, 64-bit thread

  • Scanner Canon CanoScan 3000F color Image

    Now that I have Windows 7 I find that this scanner is no longer supported by Canon to update the driver. Is it possible to use this device or I'll have to, scrap it?

    VueScan now on the 3000F

    "VueScan works with the Canon 3000F under Windows.

    You must install a Canon scanner driver to use this scanner under Windows. Unfortunately, Canon has a driver for this scanner for Windows x 64. »

    The second paragraph contains the stumbling, because there is no installable driver of Canon for the 3000F.

    Many scanners is taken in charge by the pilots in Vuescan, but not all unfortunately...

  • Scanner Canon 882 won't work with windows 7

    My new laptop Dell Latitude receive/will not recognize the scan of my printer Canon 882. I had no problem with my old Dell laptop. Any suggestions?

    Probably because you have not to install according to the instructions of Canon, using the supplied Canon cd, but just connected

  • Canon CanoScan N650U/656U/12200 Scanner

    Anyone know how I can get my scanner Canon CanoScan N650U to work with Windows Vista Home Basic? I reinstalled the software and did a search for drivers all without success.
    Any help would be appreciated.

    Thank you

    Read the link above and Select what you want drivers for operating system .

    There are No. Vista drivers available for your scanner model.

    Can written drivers for its products, not Microsoft.

    Time for another Scanner.

    See you soon. Mick Murphy - Microsoft partner

  • Cannot open twain source - canoscan Lide 500F

    My scanner a CanoScan LIDE 500F, I can't analyze as it came with "unable to open twain source, please check the connection and restart the Toolbox. the connetion

    so fine so how to open the twain source? I am using Windows 7 on my computer to.

    Find out!


  • Œuvres of CanoScan Lide 700F Scanner - but the software does not work

    Installed a CanoScan Lide 700F scanner. Through Windows Fax & Scan and can use it.  However the software provided, which allows to work when I first installed W7, now hangs.

    Canon support indicates that it is a problem with W7? I would like to use the software and there should be a solution please?

    The failing application name: mpnex21.exe, version:, time stamp: 0x49227b7f
    The failed module name: ntdll.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdadb
    Exception code: 0xc0000005
    Offset: 0x00028c72
    ID of the process failed: 0xd38
    Start time of application vulnerabilities: 0x01caf73c57d95b7e
    The failing application path: C:\Program Files\Canon\MP Navigator EX 2.1\mpnex21.exe
    The failed module path: C:\Windows\SYSTEM32\ntdll.dll
    Report ID: 999d4e6a-632f-11df-96f1-0019665407d5

    Try to run the installation of the software in compatibility mode, and right on the configuration file and select 'troubleshoot compatibility '... Mike Hall MVP - Windows Desktop Experience

Maybe you are looking for