Scanning for bad sectors will not complete the scan on the c: drive

Similar Questions

• I'm trying to upgrade to service pack 3 for xp and I get an error message and it will not complete the installation. What should I do?

  I'm trying to upgrade to service pack 3 for xp and I get an error message and it will not complete the installation.  What should I do?

  Hi BartlettNYC,

  Please see the links below, to solve the problems with Window XP SP3.

  Steps to take before you install Windows XP SP3.

  http://support.Microsoft.com/kb/950717

  How to troubleshoot a windows XP SP3 Installation failure.

  http://support.Microsoft.com/kb/950718

  Good luck.

• C4385 will not complete the configuration of Windows.

  C4385 will not complete the configuration of Windows. Windows 7 operating system. Netbook for wireless configuration. Installation runs smoothly until the last step, the configuration of Windows. Looking for HPPhostosmartEssential.msi. I can't on my computer. I tried full uninstall and reinstall the software with the same results.  Due to the configuration of Windows does not complete, the drivers are not installed and I can't use the printer.  Any ideas how to locate HPPhostosmartEssential.msi or how to complete the configuration of the window?

  Hello

  Before the relocation, try using windows install cleanup utlity to locate and remove HP Photosmart Essential. Please click here how it works. Since the documentation mentions on PSprinters, you must find and remove the HP Photosmart Essential.

  Click here to download and run this utility. Once you are able to do these steps, perform the reinstallation.

• I'm having a problem reinstalling Windows XP. After formatting the disk and create partitions, it will not complete the installation.

  Problem reinstalling Windows XP

  I'm having a problem reinstalling Windows XP.  After formatting the disk and create partitions, it will not complete the installation.  He goes back and reinstall Windows again.  I go through the installation of 39 minutes, the computer restarts to complete and it loops back and start the installation again. Why it does this and what I can do to move beyond this?

  Go into the BIOS and make sure that you your hard drive is not set to off, and that is the first priority boot CD and your second HD.

  Don't push when it restarts anything just to let him do what he does and report back if anything I'm sorry I have no idea.

• I am trying to download adobe reader, but it will not complete the download because there is a "drive not valid error 1327: J:\. "box that appears

  Original title: I have windows xp.  What does "drive not valid error 1327: J:\. "means and how to fix it?

  Hello

  I have windows xp and I am trying to download adobe reader, but it will not complete the download because there is a "drive not valid error 1327: J:\. "box that appears. I have no idea what this means or what to do.  I didn't know that there was such a unit, because I can not find it. I hope someone can help.  Thank you.

  Hello

  1. are you able to download another program?
  2. you have any program installed download accelerator?
  3. what browser do you use?

  Read the following article that may help you resolve this problem.
  Error 1327. "Invalid drive" | Install | CS4, CS5, Acrobat, Reader
  http://kb2.Adobe.com/CPS/404/kb404946.html

• I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or the usb ports

  Help with my computer of dumping

  I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?

  If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.

• Windows 7 will not recognize the dvd drive

  Windows 7 will not recognize the dvd drive, although it worked well for more than two years.  Now I can't access it to install new software.

  It will not be displayed in the Device Manager, bad shooters to say it is not connected or is, tried Fixit fix (could not as "not applicable to your computer update"), uninstall iTunes (in the case of a conflict - even if it worked with the DVD of > 1 year), etc., but still cannot access the DVD.

  It's obviously a known issue, given that a support page - http://support.microsoft.com/kb/976187 that recommends the fix or manually disable ALPM active power management.  If it of a known issue, why is not included in the updates and that I have to disable ALPM power if management it worked ok before?

  What now? Is turn off the power, my only option?  What happens if it is not yet recognized after that?

  Hello

  If the drive is viable:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951

  
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• 6 days years Samsung Mega 6.3 - Skype will not complete the connection process

  I downloaded Skype on my Samsung Mega 6.3 new since I use Skype at work for messaging and want to be able to use it on my new phone like I did on my previous (iphone 4) when you work remotely.

  After entering my microsoft account information, it tries to connect, but starts a loop where it climbs from the home screen to the loading screen and back Skype, constantly.

  If I press the back button, it will make starting Skype and considered as being active on my header bar, but if I try to pull up, we start the loop.

  Phone AT & T. cannot change my APN settings, so change my proxy to 0 will not fix the problem.

  Have you tried to empty cache. No help.

  Have deleted and reinstalled several times now (I think I'm on 5).

  Ideas people? Or I'll just have to in the loop and wait for the next update to use this great software?

  Looks like the update today resolved my problem. I can now use Skype without any problems.

• NetInstall/Netrestore will not complete the boot process.

  Hello world

  I searched through the forums (and days of Google searches) try various process of troubleshooting with no progress. I hope someone can shed some light on what I'm doing wrong.

  So I'm under OS X Server 5.1.7 (Build 15S 7055) on a iMac (21.5 inch, end 2013) OS X 10.11.6 (Build 15 G 31).

  Try to get a server NetInstall if I can image a full Lab of iMacs (same model as the server)

  Server runs on a closed network offering DHCP clients through a Nortel switch. No firewall, no ports blocked (no connection with the outside world). File sharing and NetInstall are on.

  Clients receive IP addresses and can see each other (sharing, ping, see Manager boot images provided by the file server)

  When you launch Netboot (I use the method 'hold the Option key', but I tested with "n" just with the same result) the client displays all hosted images. For my test, I use a NetInstall image built from the 'install El Capitan' downloaded application from the App Store using system image utility.

  When you attempt to start the client image will display the progress under the apple logo bar and it will take about 45 minutes to 1.5 hours to fill full and won't progress of there. Sometimes the progress bar only about 3/4 of the way to make and freeze there for hours.

  Here are the journal entries of NetInstall for my last test:

  < <

  19 Jul 08:10:14 Arch-Server bootpd [327]: BSDP INFORMER [5] 1, 68:5 b: 35:bb:95:6 b NetBoot001 arch = i386 sysid = iMac14, 1

  19 Jul 08:10:14 Arch-Server bootpd [327]: NetBoot: [1, 68:5 b: 35:bb:95:6 b] BSDP ACK [LIST] sent 10.0.1.10 pktsize 354

  19 Jul 08:10:14 Arch-Server bootpd [327]: DHCP INFORM [5]: 1, 68:5 b: 35:bb:95:6 b

  19 Jul 08:10:14 Arch-Server bootpd [327]: acknowledgement of receipt sent iMac 10.0.1.10 pktsize 300

  19 Jul 08:10:15 Arch-Server bootpd [327]: BSDP INFORMER [5] 1, 68:5 b: 35:bb:95:6 b NetBoot001 arch = i386 sysid = iMac14, 1

  19 Jul 08:10:15 Arch-Server bootpd [327]: NetBoot: [1, 68:5 b: 35:bb:95:6 b] BSDP ACK [LIST] sent 10.0.1.10 pktsize 354

  19 Jul 08:10:15 Arch-Server bootpd [327]: DHCP INFORM [5]: 1, 68:5 b: 35:bb:95:6 b

  19 Jul 08:10:15 Arch-Server bootpd [327]: acknowledgement of receipt sent iMac 10.0.1.10 pktsize 300

  19 Jul 08:10:16 Arch-Server bootpd [327]: BSDP INFORMER [5] 1, 68:5 b: 35:bb:95:6 b NetBoot001 arch = i386 sysid = iMac14, 1

  19 Jul 08:10:16 Arch-Server bootpd [327]: NetBoot: [1, 68:5 b: 35:bb:95:6 b] BSDP [SELECT] ACK sent 10.0.1.10 pktsize 371

  19 Jul 08:10:16 Arch-Server bootpd [327]: DHCP INFORM [5]: 1, 68:5 b: 35:bb:95:6 b

  19 Jul 08:10:16 Arch-Server bootpd [327]: acknowledgement of receipt sent iMac 10.0.1.10 pktsize 300

  Jul 19 09:15:39 Arch-Server bootpd [11761]: name of the server Arch - Server.local

  Jul 19 09:15:39 Arch-Server bootpd [11761]: interface 5: ip 10.0.1.251 mask 255.255.255.0

  Jul 19 09:15:39 Arch-Server bootpd [11761]: subnets: conversion of 'domain_search' failed: empty array

  Jul 19 09:15:39 Arch-Server bootpd [11761]: bsdpd: Re-reading configuration

  Jul 19 09:15:39 Arch-Server bootpd [11761]: bsdpd: size of the shadow file will be set to 48 megabytes

  Jul 19 09:15:39 Arch-Server bootpd [11761]: bsdpd: 00:15:00 hour of the age

  Jul 19 09:15:39 Arch-Server bootpd [11761]: AFPUserList_init: Group com.apple.access_afp does not exist

  Jul 19 09:15:39 Arch-Server bootpd [11761]: DHCP DISCOVER [5]: 1, 68:5 b: 35:bb:95:6 b

  Jul 19 09:15:39 Arch-Server bootpd [11761]: OFFER sent iMac 10.0.1.10 pktsize 300

  Jul 19 09:15:39 Arch-Server bootpd [11761]: DHCP REQUEST [5]: 1, 68:5 b: 35:bb:95:6 b

  Jul 19 09:15:39 Arch-Server bootpd [11761]: acknowledgement of receipt sent iMac 10.0.1.10 pktsize 300

  > >

  I know what I don't see is a BSDP DISCOVER/OFFER but I don't know why.

  Verbose mode on the Client does not give me something that I can understand what it is to do (or not do).

  I literally read the chapter NetInstall and followed the examples set up in OS X Server 5.0 Essentials book and I still don't see why its not working.

  If anyone can enlighten us or if there is more information/papers/tips I can give you please let me know. (I hope, that I forgot to mention something that I didn't want to as it is lengthy and unreadable)

  Thanks in advance.

  Oh, I should mention that I did whitelist the server on the client side.

  I also tested the images via NFS.

  (I wanted to change this in the original post and now I can't figure out how to delete a response...)

• She launched 'System Restore' now the computer will not complete the installation

  Clean HP Pavilion bought in 2003.  With the help of daughter for school work.  Computer running very slow.  A ran all the relevant boxes virus / malware scans, the old deleted files ' ran fix disk, disk cleanup and defrag, still running slow.  A ran the 'System Restore' edge (press F10 during boot).  It works through the restore program and sit as I just opened the box.  Through the implementation of procedures and click Finish and it is just there for up to 6 hours before I finally gave up.

  Oh Dear Brian, I hope there is no data file on the computer, you will need in the future. The F10 key is the path to the system recovery that restores the computer to the factory settings. It comes to the computer when it was bought new in 2003. It erases all the data files and installed programs from the drive. In other words, you start again:
  http://www.pctechbytes.com/HP/HP-recovery/

  What is the exact model of HP Pavilion?

• My computer will not complete the update

  I've updated my computer tonight and after the reboot. Until I can connect the "configuration of updates: stage 3 of 3" came, as usual, but this time he remained at 0% for a few seconds and then the computer restarted again. It always restarted it self shot 10 times until I forced to close. Cannot start without failure or something.

  
  

  What should I do?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If above does not solve the problem:
  

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• BlackBerry Smartphones Google Mobile App will not complete the installation.

  I don't have a data plan, so I can't get the App Store.  This is the case, I went to Google to download Mobile from Google directly (via WiFi).  I was able to do, but when I went to run the application, he said he needed to complete the installation, and after that for a while, he said that it was impossible to complete the installation.  I was always connected to WiFi, as this was happening.  I don't think that it has nothing to do with not having a data plan, as I was able to install the Opera Mini browser (which I deleted it since) without a data plan, but perhaps I'm missing something.

  Hello

  I went directly to the source, on the Google Mobile help forums

  They seem to say that Google for BlackBerry applications are not compatible with a Wi - Fi connection: Google Maps, GMail, Google Mobile Sync, Google Mobile App.

  http://www.Google.com/support/forum/p/Google+Mobile/thread?TID=01af0d2bd7ced5c1&hl=en#all

  http://groups.Google.com/Group/Google-mobile-help-BlackBerry/browse_thread/thread/c0850789170d82e2/a...

  I don't know who are the people who answer, but, if the information cannot be more specific.

• 10 elements will not complete the installation. It says installation required custom and shared technologies go

  I tried to install 10 items last night and halfway through it just kept saying installation required the shared technologies and remained on that and will not go further. I tried to uninstall and start again, but it won't let me do no more. It says I have to complete the installation of which has already begun. I am very frustrated. I'm a photographer and I need to get this problem fixed so I can finish my work. Can you advise me to do something to fix this?

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-installation-Photoshop-elements-premiere.html#main_Error__Below_mentioned_applications_have_failed_to_install__Shared_tech nologies_

• Remote Desktop for Mac will not use the printer driver

  On an iMac with Lion 10.7.3, I try to get an Epson ReadyPrint T20 - TM to use the Epson driver when it is connected to our server Windows 2008 R2 with DRC 2.1.1 but it keeps using a HP Color Laser Jet 2800 Series PS we have not the HP printer and I need some features in the Epson driver.

  I installed the printer on the server and removed several times without alteration. When 'Use a printer connected to the Mac' is selected in the preferences of the DRC the printer is a printer that is redirected, but the use of the driver of HP. Printing from Mac works with all the features.
  On the server, we have 3 installed roles, file, desktop Services to remote and Web server (IIS) Services
  We have tried to map the printer with an EPSONRedirect.INF file that contains the following:
  ; EPSONRedirect.INF

  ; Printer mapping file for drivers side client-side Server

  [Printers]

  "EPSON TM - T20" = "EPSON TM - T20 ReceiptJ4"
  No idea how we can fix this?
  [Transferred to the Windows forum by moderator]

  Hello

  I suggest you to post the question on the following link:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/thread/f07d7d4a-BCCC-4c23-8BF3-c81d31937484/

• will not complete the download

  How can I me KB (definition 915597 1.187.12 to complete the download.) He said his download and 40 minutes more later no chance!

  Try this link, look in L.sub-menu "To get the latest updates", a new page should open

  for the Defender. https://social.technet.Microsoft.com/search/en-us?query=Vista%20915597&AC=4#refinementChanges=60&PageNumber=1&showMore=false