Scanning HP solution center shortcuts

Similar Questions

• Where are the Solution Center shortcuts, and how to use the (Scans)

  A frustration more than Windows 8 to get more than

  I have attached my C3180 to my new Windows 8 machine and the software installed.  It is running, but I'm a bit lost in the use of the center of Solution that seems different from what I had on XP.

  1. the only way I could see to change the destination of a scan, has been to create a new shortcut with the destination I want to use.  Is this correct?

   

  2. now that I have a short cut, where is it? When I run a scan from the Solution Center, the analysis proceeds to the default destination, so it must use the default shortcut.

  Is it possible to use the start scanning on the home of the solution Center window and make the scan go to my choice of the destination folder?

  Quit smoking research

  I found how to use the solution Center in Windows 8 here.

• HP - scanning problem solution Center

  I was in the middle of the digitization of images in a Word 2010 by using my HP6310 all in one document. After scanning a selected section of a page like I did several times, I got a message saying:

  "An internal error occurred during the processing of the document. Click OK to close the program and then try one of the following values:-restart the program. -Restart the PC and then try again. -Reinstall the software photos & images and try again. »

  I tried to close and restart the HP Solution Center and the word. I tried scanning in a new Word document. I tried to restart the PC. I've updated the software of HP. In the process, I found and downloaded the HP printer Diagnostic tools. When I ran the Scan doctor, I got a message saying:

  «Center of solution error: your system needs an update to fix this Solution Center error.» Click on the "Get Update" to download the update. Once the download is complete, run the downloaded file to update your system. »

  However, when I clicked on "Get Update", I received the following message: 'could not open the page. The service or the information requested is not available at this time. Please try again later. (Error: system-websrv_unavail) »

  I tried to restart several times over a period of several hours.

  Before this problem in his set, I started to receive error messages when I tried to save the Word file containing scanned images. The messages said that I could not save due to a file permission error. The message does not always appear, and I found I could work around the problem by using the function save pennies on the file tab. I don't know if these two problems are related.

  I am using Windows Vista 64-bit.

  Hi @CL-HP

  There are indeed a few updates available, which may be necessary; However, I think it would be better first to perform a full uninstall, then reinstall the software, then look for the necessary updates.

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. The new software - uninstall the printer software Instructions
  4. Once the uninstall is complete, reboot the computer
  5. Follow these steps to reset the registry settings and options for Windows Installer.

• Can print but not scan: HP Solution Center says "HP Photosmart Premium C309g-m is disconnected!

  Hello

  I have a PC with Windows Vista Home version 6 service pack 1 for her, a connected HP Photosmart Premium C309g-m wireless printer, my work of connection Wi - Fi and is detected by the printer, but I can not scan anything from the HP Solution Center as it says "HP Photosmart Premium C309g-m is disconnected!

  I printed a wireless test page and it works.

  Any help will be appreciated!

  Thank you

  Catherine.

  Catherine, looks that you encounter some problems scanning on your computer. To start have you tried completely removing the softwware and put it back in place for drivers on the HP site downloads? Here's how I'd do...

  First of all, if you use a USB cable, be sure to remove it (it's important). Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

  In the menu START menu type "%temp%" and press ENTER. Here, I want you to press Ctrl + A, and press DELETE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.

  Download this file and if the option to use the full setting software.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=3793676&

  Install and let me know the result!

  Have a great day!

  -Spencer

  PS I recommend to try installing the printer via the USB cord and an Ethernet cord if this does not work wireless, to test methods of communication. Let me know which, if any, works.

• While a software F4400 HP Solution Center

  Hello people,

  I'm building a new computer for me and wish to continue to use my HP printer. When I bought it I do not remember if it came with the HP scanning software solution center or if it downloaded when connected for the first time.

  More precisely, it is the HP4400 printer and Scanner serial #CN998BM4CT05J1, model #CB750A. Do I need software installation so I can connect to my new machine or it automatically connect with your site and download the software?

  He will host on a new operating system. Right now I'm on XP, but the new system will probably be Windows 7 or Vista. I haven't decided. The F4400 won't work in these environments?

  Last but not least, is it possible for me to download a copy of the HP solution Center for this printer, I record to the facilities of the future system?

  Your help is greatly appreciated.
  BW

  Hi Brian,.

  The HP Solution Center software is available for any version of Windows up to Windows 8.

  You can download the software and save it for later use at the following link, the link include the driver for Windows Vista, 7, 32 or 64-bit:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-68493-4&cc=us&DLC=en&LC=en&OS=2093&product=3742086&sw_lang=

  Just in case, be aware that the link above is not provided for Windows 8 or 8.1, for that you will need a different driver from the HP site.

  Shlomi

• C4280 Solution Center Software refuses to see all-in-One installed

  OK, my fine ran C4280 forever, all of a sudden won't scan from Solutions center - get various errors - communication error with the device, no device installed, the software is not installed, cannot communicate, software missing etc. ad nauseam. Have reinstalled, uninstalled using all level 4 with rotation of MSCONFIG just turned off and it still don't load correctly 5 different downloads of HP or the CD. The problem is in the part somewhere, scanning software as I can scan WIA and painting (which uses the WIA) Photoshop and most of the programs with the exception that the program offers you to use the scanner software, I get a message similar to "not installed". Obviously not a problem of USB that I can scan fine in WIA and obviousl it is two-way connection, but solution center not scan. He'll work for the copy function, but hit the photo or document scanning time and error message. Any ideas away from throwing the entire unit. Completely updated XP3 to day running.

  I was contacted at last by the advanced support tech, unfortunately, he wanted me to reformat my hard drive and reinstall windows XP, which was not an option. Instead, I got creative - uninstalled "Solution Center"through the control panel and all HP, including HP Photosmart 2.0 software. Put the cd in and sailed to uninstall (rt click on the disc in the cd drive and open, search for folder util, open. find the ccc folder and open, uninstallers are listed as "uninstall_L1, 2, 3, 4") used level 1, then 2, then 3, then 4 programs uninstall and rebooted. Then, I downloaded the HP Photosmart 3.5 software and installed by itself, as the prior installation would not allow the scanner to connect (TWAIN error absent). Then downloaded the package "Solution Center" and the software for a C6280 and installed, although it would not recognize the C4280, I continued with the installation by checking I would connect later. I unplugged the PRINTER from the power from the USB and restarted. After restarting, connected to the PRINTER and then the USB, windows recognized as new hardware, let the Wizard do its thing until he asked for the CD, put the old CD in the drive and let it copy the files he wanted, then came and asked to install a HP screen, I chose "custom" fist and then next sceen asked for auto or advanced , has chosen peak and let it go from there (most of the programs in the list showed already "installed"). When he finished I had 2 digital imaging monitors on my sys tray, rebooted and then alone. Solution Center now opens, communicates with the scanner and the works - if a little slowly, but it is 100 xxxxxx software not software of xxxx. 90.l transmit the tech boys so that they do not force others to reformat and destroy their systems without reason.

• solution center scan shortcuts are missing

  Windows 7, 64-bit, Photosmart Premium C310a.  HP Solution Center scan shortcuts are missing.  You want to scan to searchable PDF or Word 2007.  I used to but I had to uninstall the software and reinstall it, and they won't come back.

  I realized that my previous printer, 3210xi PS, OCR software, so I installed the center of solutions of this package and it worked.  Thanks for your help.

• HP Photosmart 2570 - scanning parameters not no projection in the HP Solution Center software

  Everything worked, and then it stopped working. After several uninstalls and reinstalls, I have running HP solution center software but don't show any scanning settings. I am not able to scan. The button to scan does not yet show upward.

  How can I get the scan to show button and do scan?

  Try bypassing the solution center to access the scan function.

  To work around the centre of solutions for scanning:

  1. Click on the on the start menu.
  2. Click on computer.
  3. Open the C drive.
  4. Open the Program Files (x 86) folder.
  5. Open the HP folder.
  6. Open the folder of digital imaging.
  7. Open the bin folder.
  8. Run the hpiscnapp.exe.

  If the hpiscnapp.exe shows the scan options and allows you to scan, then right click and create a shortcut on the desktop, then you won't have to dig for it every time.  I was going to name the shortcut something like HP Scan, so you know what it is.  Let me know what happens.

• OfficeJet 4500 all-in-One Printer G510h - can't scan using the printer or HP Solution Center

  When I tried scanning document/image of my desktop with the use of the HP Solution Center, by pressing the button scan, printer/scanner does not react but simply go back to the home menu. I've tried a few things: reinstall the printer driver, restart the computer, unplug and turn on the printer, but it's the same thing happens again.  When I tried to scan the document/image directly from the printer/scanner, the following error message appears on the HP Solution Center:

  "An error has occurred with the HP scanning application. Try the following steps after each step, try to scan the image.
  -Restart the program
  -Restart the computer
  -Reinstall the HP Photosmart software that came with the device. »

  However, there is no HP Photosmart software supplied with the unit.

  Hello

  Please perform the below mentioned steps that should solve the problem.

  Click START > computer > C: > Program files > HP > Digital Imaging > Bin > right click on hpscnapp.exe, and then click SEND TO OFFICE.

  Back on the desktop, and then double-click the shortcut icon hpscnapp.exe , he would open the interface to start scanning.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give a Kudos!
  I work for HP

• Win 8 - Photosmart c4580 not scan with HP Solution Center lack wifi

  HP Photosmart c4580

  8 64-bit Windows

  My printer is Photosmart c4580, and I have Windows 8 64-bit operating system.

  I can print throw my wi - fi connection, but I can't scan.

  If I want to analyze I need to plug the usb cable (10 meters long, because the printer is in the other room).

  I want to see the level of ink and I can't because I don't have the win8 HP Solution Center.

  Try to install the drivers win7 and Solution Center (PS_AIO_04_C4500_USW_Full_Win_WW_130_140.exe) (propriety - win7 run mode), and the program crashes.

  What can I do to scan using my wifi connection and installation of HP Solution Center

  Thank you

  Everything is ok now with the new drivers.

  Thank you

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109997-1 & CC = UK & DLC = in & LC = on & os = 4132 & Product = 3418707 & sw_lang = El

• Why the HP Solution Center loses my documents after scanning?

  While tryning to scan a document, the document, but the document "digitized" HP Solution Center ever recorded. I changed the output type (.pdf, .tiff, etc.) and I've changed the "save to" folder, no joy. Since I am on Windows 7, I downloaded the patch "DOT4" and re-installed the software and... nothing. Noticed that the "open file after the backup" function has failed when I tried it either. Help!

  Seems that there is an update to fix the component that controls it.  You can get the update from the link below.  Let me know what happens.

  http://support.HP.com/us-en/document/c01960605

• C6180 scan works very well from the printer to the pc, but hp solution center gives error 4, [(3,42,0)]

  Photosmart C6180 wireless unit connected to your PC running windows 7 64-bit ultimate.

  Scan worked fine but after some update (I have not seen that and when) stopped scan from the hp Solution Center. It gives an error 4, [(3,42,0)].

  If I scan directly from the printer, it works fine, even if I send the jpg for the PC images\Mes traverses the directory.

  I already deleted the hp Solution Center and reinstall it using AIO_cda_FSW_Full_Win_WW_130_140.exe

  Thank you

  hasksm

  Hi there hanksm,

  I'm sorry to hear about your problems with your Photosmart C6180 and Windows 7 scan and notice you receive the error code. I studied the error and found a position with a person with a 'Solution', so hopefully this will help your situation.

  Please see JasonBlake7 post: scanning error

  Please let me know how it goes and if you need help!

  Thank you

• HP Photosmart C6280 all-in-one: HP Solution Center does not work. I can print but not scan

  I can't open the HP Solution Center to scan. When I try to open it I get a notification that all software is not installed. I ran Dr. scanning HP and all software installation downloaded and ran. Every thing is installed. Tried to open it to new and same result.

  Am going to the forum and found this update of windows 3132372 could be the problem. Checked and I do not have that update to uninstall.

  Because the HP Scan and Capture app can be a solution. Who has downloaded but it refused to detect my printer.

  I really need to solve this problem. I got nothing else problems with printing and scanning as Windows 10 came.

  A ran a uninstall and reinstalled (second time). It's working now.

• HP Photosmart B110: Solutions Center installs - problems of usb - only wanted to scan - how to install the scanner part

  -With the help of HP Photosmart B110

  -Use of Tower/Desktop computer running Windows 7 64 bit

  Printer/Scanner connected via WiFi to router

  -Printer part works, I can print to this device

  -Scanner is accessible via the device Web page.

  I want the software of the scanner Solutions Center.

  I can't install the Solutions Center on Windows 7 64 bit. Setup stops and says that I have USB hardware and driver problems. USB on my Tower is USB2 and USB3 ports. Everything works perfectly and the Windows Device Manager has no problem with USB drivers/devices.

  How can I install the scanner software (or all of the Solutions Center software)?

  Tried to look in the folder for the files of instsaller scanner, nothing seems to work. (pulled other positions where it not install Solutions Center). Computer is working very well, so my only option at the moment is to look through the device's Web page, but it is not the best. And I would like to use the software. Also one third of the software "fax and scan" software and windows does not see the connected B110 (probably because it is on a network and not directly plugged into a usb port), so these two options came out.

  HP forum, help please. Is there a way to bypass the usb part? I use this device on a network. Windows 7 sees (even if only as a printer), so also want windows to consider it as a scanner as well.

  Thank you

  Hi @jedi11csa,

  Thank you very much to get back again.

  I just talked with a few colleagues in this regard, and this problem seems to be more a matter of Windows operating system, if the computer displays that USB related errors as well as the installation had not yet reached the point where it asks you to select your connection type.

  Maybe it's an investigation that is best suited for community Microsoft Forums as my resources have been exhausted in this respect.

  I hope that you are able to find the solution you need.

  Thank you.

• With the solution Center HP can magnify an already scanned photo?

  I have Windows 7 and the HP Solution Center.  I have already scanned photographs and would like to know if I can expand or otherwise alter these photos using the Solution Center and if so, is there simple instructions anywhere where I can get my hands on?

  Problem solved.