Scanning on 6150 all-in-in-one

Similar Questions

• Can not find the driver of scan to PRINTER ALL-IN-ONE KODAK ESP 5210

  Can not find the driver of scan to PRINTER ALL-IN-ONE KODAK ESP 5210. Device Manager says last driver is installed.

  Moved from feedback

  Original title: scan driver

  Hello Timmy,

  Please take a look at the following link for the driver\firmware for your printer.

  KODAK ESP 5210 All-in-One Printer Firmware - WINDOWS operating systems

  If this is not enough, you may have contact with Kodak support for the same. Thank you.

• DeskJet 3050 all-in-in-one J610a: Deskjet 3050 J610a cannot install scanner

  1. I tried to install the printer software for the Deskjet 3050 all-in-in-one J610a on a Dell E6530 with Microsoft Windows 7 Professional computer.

  2. but everything he tried guard fails with the message "installation Failed - the software for your printer cannot be installed."

  3. When you click on the ' details button it shows
  "Setup error. Install the Windows service could not be accessed. This can occur if you are running Windows in safe mode or if Windows install is not properly installed. Contact your support team.

  4. you will then have a solution. He then puts a document "default installation HP - 1601 MSI' on your desktop."
  a. He then opened Windows services to check if the Windows service install is running? Yes it's on my system.
  If I reinstall the same mistakes, as shown in the 2. and 3.

  5. I tried to replace the Windows Installer by running the commands ' msiexec.exe / uninstall ' and "msiexec.exe/regserver" (also tried in safe mode) for both 32-bit and 64-bit versions. Then by restarting. But making the same mistakes as in 2. and 3.

  6. I tried the installation CD and the last Installer downloaded DJ3050_J610_1315 - 1.exe from the Hewlett-Packard Web site. But making the same mistakes as in 2. and 3.

  7. I tried to run Microsoft Fix - it version 50809 who had another option to try. If you run it, it says 'creation creating a restore point, please wait... '. ». After a wait, he says "this Microsoft Fix - it impossible to deal with".

  I tried another more recent version of Microsoft Fix - it (downloaded from the Internet):
  MicrosoftFixit.ProgramInstallUninstall.Run.exe
  Running to check installation problems showed a list of programs to check installation problems.
  But it did not show the installation of HP DJ3050_J610_1315 - 1.exe file or similar in the list it could
  not be fixed.
  If you choose "not listed" then it shows "we have not identified any problems and that's why no fixes have been applied.

  8. If I run the files D3050x64.msi and D3050x32.msi from the CD (using Microsoft Windows install) it also fails with the error, as in 2. and 3.

  9. If I install ' HPSupportSolutionsFramework - 12.3.11.29.exe' it installs, but does nothing. It's probably not running and no instructions on how to do work.
  Update: it is actually a service running in the Microsoft Windows services such as 'HPSupportSolutionsFrameworkService '.
  The executable file is located in C:\Program Files (x 86) \Hewlett-Packard\HP Support Solutions\HPSupportSolutionsFrameworkService.exe
  This service runs, but does not seem to be enabled.
  It adds a controller service background that adjusts automatically to
  run. Delay the start of this service is possible thanks to the function
  Manager. A scheduled task is added to the Windows Task Scheduler in order
  to start the program at various times demand (variable hours of work
  Depending on the version). The software is designed to connect to the
  Internet and adds exceptions to Windows Firewall to do this
  undisturbed.
  Scheduled task
  hpsupportsolutionsframeworkservice.exe is intended as a task with the class '{98FA553D-D703-4E16-9884-F328AC21770F}' (works on registration).
  Service
  hpsupportsolutionsframeworkservice.exe runs as a service named "HP Support Solutions Framework Service" (HPSupportSolutionsFrameworkService) "this service allows the detection of HP products and allows the identification of support solutions for detected products.".
  Boot file (user run once)
  hpdia.exe is loaded only once in the registry of user (HKCU) current as a name of boot file "HP download and install wizard" that charge as "C:\Program Files (x 86) \Hewlett-Packard\HP Support Solutions\Modules\HPDIA.exe" / reboot.
  Windows Firewall enabled program
  hpdevicedetection3.exe is added as a firewall exception for "C:\Program Files (x 86) \Hewlett-Packard\HP.
  Check "Windows Task Manager" for example by running the command line
  Schtasks.exe
  or to run GUI
  Start taskschd.msc
  did not show anything about this service I can say.

  10. by using a troubleshooting earlier, I managed to install * only the printer *. But the * scan * can not be installed.

  See:
  https://community.Spiceworks.com/topic/443342-Windows-7-PC-keeps-trying-to-install-WSD-print-device?...

  1 - run
  rundll32 printui.dll/s/T2
  (this from the cmd.exe command line)
  2 - I couldn't find the 3050 in the list of default constructors (for example, "HP")
  3. - click on the button ' Add... »
  4 - click on the button "next".
  5 - automatically activated for example is 'x 64' '.
  6 - click the button "next".
  7 - click on the 'Have Disk' button... »
  8 - fill the printer Hewlett-Packard CD-ROM drive letter that
  should be in your computer
  For example
  D:
  9 - who will install the printer driver 3050 J610 and display it in the list
  10. - click on the 'Start' button of Microsoft Windows
  11. - Select from the list of "devices and printers".
  12 - if the printer 3050 J610 appears, right-click on it and select
  "Troubleshoot", if not right click, "Add a printer", make sure that
  your printer is on, and then select the printer 3050 and let
  It installs.
  13 - run the first fix to get the printer driver
  14 - run the second fix to make the printer the default printer
  15. - successful on Microsoft Windows 7 Professional execution

  (11 for example if I run the program "HP print and scan doctor program" to troubelshoot (= HPPSdr.exe) it is said that the ' HP445411 (HP Deskjet 3050 J610 series - network 192.168.1.49) - installed). It is said that the full product is not installed, then begins to download. But the executable that it downloads the same DJ3050_610_1315 - 1.exe as downloaded on HP website. So to make the same mistakes as in 2. and 3.

  12 Note: I basically never have no problem with installation on this computer. Only this printer HP 3050 J610a software does not always install.

  13 - tried to run pnutil.exe

  Because I managed to install the * printer driver (but not the * scanner driver) using the command
  rundll32 printui.dll/s/T2
  I was looking for a similar solution method for the scanner.
  So tried for example
  RUNDLL32. EXE, SETUPAPI. DLL, InstallHinfSection DefaultInstall 132 HPScanMiniDrv_DJ3050_J610. INF
  but which failed with the error "failed to install".
  Also tried to navigate this HPScanMiniDrv_DJ3050_J610 file in Windows Explorer. INF
  then right click on the file name and select 'install' in the list, but that showed a dialog box
  "Install error - the INF file selected does not support this method of installation".
  Then I found this link:
  https://social.msdn.Microsoft.com/forums/Windowsdesktop/en-us/60f4b917-93c9-400A-B91A-15375a8793bf/i...
  who suggested using the Microsoft «pnputil.exe» program
  After inserting the installation CD original HP located in D:
  and it points to the file ' HPScanMiniDrv_DJ3050_J610. INF'
  which is present by default on this HP CD,
  and by running this command:
  --- cut here: begin --------------------------------------------------
  d:\ Tuesday, May 30, 16 16:32:33 > pnputil
  Microsoft PnP utility
  Use:
  ------
  PnPUtil.exe [f |-i] [-? |-| d |-e]
  Examples:
  PnPUtil.exe - an a:\usbcam\USBCAM. INF-> Add package specified by INF USBCAM.INF.
  PnPUtil.exe - a:\drivers\*.inf-> c add all packages in c:\drivers\
  PnPUtil.exe-i - one a:\usbcam\USBCAM. INF-> Add and install the driver package
  PnPUtil.exe EI-> list all packages 3rd party
  PnPUtil.exe d oem0.inf-> delete package oem0.inf
  PnPUtil.exe f d oem0.inf-> Force delete package oem0.inf
  PnPUtil.exe -? -> This form to use

  So I ran this command:

  d:\ Tuesday, May 30, 16 16:33:39 > pnputil-i - one HPScanMiniDrv_DJ3050_J610. INF
  Microsoft PnP utility
  Processing inf: HPScanMiniDrv_DJ3050_J610. INF
  The driver installed on a device on the system.
  Successfully added driver package.
  Published name: oem115.inf
  Total attempted: 1
  Number was imported successfully: 1
  --- cut here: end ----------------------------------------------------

  The disk check showed the file "oem115.inf" was indeed installed in the directory "c:\windows\inf\".

  During troubleshooting earlier, I already copied the file
  HPScanMiniDrv_DJ3050_J610.dll
  Located on the HP installation CD
  in the folder
  c:\Windows\System32\
  and also to
  C:\Windows\SysWOW64\

  I then run the steps here:
  http://Windows.Microsoft.com/en-us/Windows/working-with-Scanner-Camera-Installation-Wizard#1TC=Windo...
  Before using the wizard, connect your scanner or camera and turn it on.
  If Windows detects the device and installs the correct driver, you're all set. There is no need to run the wizard.
  To start the scanner and Camera Installation Wizard
  Open the wizard scanners and cameras by clicking on the
  Start button, then click Control Panel.
  In the search box, type scanners and cameras and then click Scanners and cameras.
  Leave administrator needed if you are prompted for an administrator password or a confirmation,
  type the password or provide confirmation.
  I can't find that on Microsoft Windows 7, but clicked on the button 'add a device '.
  This shows the scanners currently present on the system.
  If it is present, double-click it.
  Microsoft Windows will be found the driver for you.

  But he could not find a scanner or install the scanner driver.
  So not solved.

  14 - Note: If a successful installation: for example, you should be able to see the
  device scanner in 'Start' > 'Control panel' > 'System' > ' Imaging
  devices

  15 - I then tried to run Windows fax and scan program
  (you need to install first)
  WFS.exe
  But not find scanner.

  16 - I then connected the printer with a USB cable to the computer.
  He began the installation of the driver and reported a successful installation
  and analysis successfully.
  I guess that somewhere in the previous steps, that the pilots were in the right
  place.
  But it works with my attached USB cable.
  If I try to remove the USB cable it says
  "Cannot find the scanner." No scanner or other source TWAIN found on the system'

  17. I also tried to run the Installation Wizard of HP printer
  http://support.HP.com/in-en/document/c03521864
  but that no longer works.
  It has detected now:

  "HP Deskjet 3050 J 610 series" - network
  But for the network one he noted a problem:
  "The wizard has reported a problem with the software driver for the selected printer."

  "HP Deskjet 3050 J 610 series" - USB
  For this version of the USB what he reported:
  "Basic features drivers seem to be installed for the selected printer." We recommend you to install the complete HP software to get all the features of the printer"

  If you click 'next' again it downloads the usual HP software that you
  can not install. With the same mistakes as in step 2. and 3. here.
  So no solution.

  18 - of the current workarounds:

  a. - possibly try some of the steps above which may take for example, the printer and scanner driver to the right place.
  Then connect a USB, Microsoft Windows should detect the printer / scanner
  and install the drivers.

  But printing should work wireless.

  Disadvantage:

  To analyze you will need to connect using a USB cable and the scanning doesn't work so not wireless.

  b. - buy or use Hamrick VueScan. It installs its own drivers to scan.
  But it is not free software. But it works by scanning wireless also.

  Question: If you have the best solution or workaround solutions, for example to activate
  scan wireless too, please let me know.

  Hello @knudvaneeden,

  It is a great place to get help! I read your post and see that you receive an error when trying to install the software to print, but you have finally managed to install the printer by a USB connection. When you use the printer as a wireless connection, you are not able to scan. Please provide all the detailed steps that you have already tried. I want to help you solve this problem.

  Make sure that you disable the Antivirus software and scan in real time if your software Antivirus has this feature. It can affect the entire software installer.

  Follow this document to see if you can install all drivers: HP monofunctional and printers multifunctional - installing software Fatal Error "fatal error 1601' (MSI error 1601) displays for HP. »

  Try the scan of the painting to see if you have the same problem.

  Run the Print and the doctor Scan and let me know the error codes or if everything is checked. You can attach a screenshot.

  Scanning ports is not open on the router to the origin of this problem. You can contact the router company to verify and to open these ports 9220/9500/427 on the router.

  You can click the 'Thumbs Up' to thank me for my efforts! If this helps you resolve the problem you are experiencing, please click the "accept as Solution. Keep me posted. Good luck!

• It might make me totally distracted, but in the password protocol, it seems all sites want one and then somehow I've now changed my passwords?

  Hello

  It might make me totally distracted, but in the password protocol, it seems all sites want one and then somehow I've now changed my passwords? IE: Google, Microsoft...

  Some people say that I need only a pswd for all sites?

  Some say all change every month... you, the experts say?

  Thank you

  Hello

  One of the worst things you can do with passwords is to have the same password for everything. For example, someone like a hacker finds your password by e-mail. You can use the e-mail address as username for several things, such as the online stores, financial sites, etc.. Once they know this address combination and e-mail password works on a single site, hackers can try on many popular sites. You are then not only your email hacked, but a lot of things.

  There are more tips here:

  http://www.microsoft.com/en-GB/security/online-privacy/passwords-create.aspx .

• How to properly temporarily disable all channels except one in the multichannel PID control loop?

  Hi all

  Help me please to solve the problem. How to correctly temporarily disable/enable all channels except one in the multichannel PID control loop?

  Thanks in advance,

  Oleg

  Hi Oleg,

  the entry "Car?" of the AdvancedPID is a table – as well as MS and pv entries.

  So what's the problem say - / allowing for a control (aka of entry) instead of all loop?

• I managed to remove the icon to display all open windows one behind the other.

  I managed to remove the icon to display all open windows one behind the other.  Where can I find it now?

  Also, my laptop keeps getting an error when I try to restore to an earlier date and told me that it is impossible to complete.

  Hello

  Which, in my view, that you have a problem with, it's called windows Flip 3D!

  Try this first and see how you go...

  1. To turn on the Quick Launch bar, follow these steps:
  2. Right-click anywhere on an empty spot on the taskbar.
  3. Choose toolbars from the menu that appears.
  4. Select Quick Launch in the following menu so that it is checked.

  You should then be able to click the icon to switch between Windows now and use the 3d Flip...

  Or

  . Right click on the Quick Launch toolbar, but not on an icon
  2. Select the folder from the context menu. It will take you to the Quick Launch folder that should live:

  C:\Users\username\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch

  3. right click in an empty area of this folder
  4. Select new, then shortcut from the context menu
  5. for the location text box, enter the following text:

  C:\Windows\System32\rundll32.exe dwmapi #105

  6. click on the next button
  7. appoint. (Flip3D, for example)
  8. click on finish

  The shortcut will now be in your Quick Launch toolbar.

  Concerning

  GT4U

• Norton Security Scan has been deleted accidentally by one of my roommates, how can I re - install on my computer?

  Norton Security Scan has been deleted accidentally by one of my roommates, how can I re - install on my computer?

  The same way you did before.

  Well said. Alternatively, you could install an anti-virus that doesn't suck (my opinion) such as Microsoft Security Essentials (free), AVG free, etc.

• BlackBerry Z10 how bulk delete email - not 5 or 10 by selecting all the emails one by one, but 'delete before... '. "or similar

  Hi Cimmunaute

  as you often work and as you say you have a lot of emails: how to remove the masses as delete block? on my old blackberry (except z10 newstes) I had the option "remove all front of (...)". Date"in the context menu, and could remove 1500 emails with a tap. do you know how to do this now? There is not such a function, we have to type and mark each email, even if there are 2000! crazy!

  Thank you very much!!

  BB: Please urgently add functionality...! I have an imap account with approximately 200 emails a day that are just a copy of the mail of the company and need to delete hundreds every day. I can not press on and select all mails only one and then delete.

  Go in the hub, select e-mail account, just under the blue email account, click and hold the date below it, cursor appears on the right, click Recycle Bin (before deletion).

  

• Hello! I use a PC and have problems loading my homepage of Muse. First of all, I made one with the address "nordensstjarnor" and updated several times without any problems. And once, I couldn't download on 'nordensstjarnor' any longer. Don't know why, s

  Hello! I use a PC and have problems loading my homepage of Muse. First of all, I made one with the address "nordensstjarnor" and updated several times without any problems. And once, I couldn't download on 'nordensstjarnor' any longer. Don't know why, when he got the address "nordensstjrnor". That me ok at first, but now I really need to give the first address once again, "nordensstjarnor". But when I try, the alternative of the site of ' publish on ' old isn't here. And if I try to create a new one, but with the old URL, the box turns red. What can I do?

  The reason why you cannot change nordensstjarnor.businesscatalyst.com is because a different Adobe ID is used for the publication of this site.

  t * [email protected] is used for the publication of nordensstjarnor.businesscatalyst.com

  t s. * [email protected] is used for the publication of nordensstjarnorindex.businesscatalyst.com

  You must make sure that Adobe ID is used in account publish, so that you can see a list of the websites published under this account. Go in Edition > Preferences > publish on Business Catalyst > publish with accounts

  You can pass the accounts for you can also make changes to the sites.

  Thank you

  Sanjit

• [basiljs] remove all pages except one

  In a script, I create pages, export to PDF, remove pages and then create a new etc.

  Right now I use this:

  [code]

  for (var j = b.pageCount (); j > 1; j-) {}

  b.removePage (j);

  }

  [/ code]

  But it's really slow. I think that indesign made many calculation after deleting a page (deadline: link textfields) so it would be more efficient to remove all pages at once.

  Now my question is how do?

  I tested and if I delete about 5500 empty pages with the script it takes about 8 minutes.

  If I select all in indesign, and then delete it takes about 10 seconds.

  Another way to speed up a litle is to erase all the content. It will take a long time but probably a bit faster.

  Thing is that I have

  b.Clear (b.doc ());

  but this removes the master page as well and I need to keep the master page.

  In short, how to remove all pages (except one since indesign needs a single page) at the same time?

  Hello

  I will remove a lot of pages in indesign with

  • Use documentPreferences.pagesPerDocument (faster)
  • use while loop or for
  • Close doc without saving changes, and then open again. (in some cases)

  Here's the test code, run with old Macbook Air + CS5 + OSX10.7

  var pp = function (args) {
    $.writeln(args);
  }
  
  var remove_all_pages_use_pref = function (doc) {
    pp("start deleting (use preferences)");
    $.hiresTimer;
    doc.documentPreferences.pagesPerDocument = 1;
    pp("end deleting");
    pp($.hiresTimer);
  }
  
  var remove_all_pages_use_loop = function (doc) {
    var i = doc.pages.length;
    pp("start deleting (while --)");
    $.hiresTimer;
  
    while (i--) {
      if (i==1) {break;}
      doc.pages[i].remove();
    }
    pp("end deleting");
    pp($.hiresTimer);
  }
  
  function main() {
    var doc = app.documents.add();
    $.hiresTimer;
    doc.documentPreferences.pagesPerDocument = 5500;
    pp('# create 5500 pages');
    pp($.hiresTimer);
    var indd = new File("~/Desktop/5500.indd");
    doc.save(indd);
  
    pp("------------");
    remove_all_pages_use_pref(doc);
    doc.close(SaveOptions.NO);
  
    pp("------------");
    pp("# try another way");
    var doc2 = app.open(indd);
    remove_all_pages_use_loop(doc2);
    doc2.close(SaveOptions.NO);
  }
  main();
  

  result

  # create 5500 pages
  30395026
  ------------
  start deleting (use preferences)
  end deleting
  28215999
  ------------
  # try another way
  start deleting (while --)
  end deleting
  268641063
  

  Thank you

  mg

• Newly purchased HP 7520 does not scan the e-all-in-one in color on mu Mac OS 10.9

  Need help, totally frustrated.

  Just installed a brand new HP 7520 e-all-in-one on my new MAC OS 10.9. The product prints and copies in color. However, all scans come out in black and white?  Who can help me, desperately in need of time. I have the printer what USB connected.

  Elske

  Hello
  The workflow default scanning set up to scan documents in black and white. Be sure to change the settings for scanning to scan color documents:
  
  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab scan tasks.
  4. Select the affected shortcut and click on change... (or double-click on the shortcut).
  5. in the section of scanning from an HP device, click the blue triangle or button view details to expand the menu.
  6. in the expanded menu now, open the drop-down next to the Mode
  7. now select the color option, and then click OK to save the changes. The next scanned using this workflow is displayed in color.
  
  Kind regards
  Shlomi

• Scanning with HP all-in-one printer with fax and scan Windows in Windows 8

  When you install a printer driver in Windows 8, you can scan from your computer without having to install any additional software to HP. This is particularly useful if you want to or not does not require the full functionality software or if your printer does not have a driver to scan for Windows 8.

  Windows Fax and Scan uses a Microsoft Service called WIA (Windows Image Acquisition) to capture an image from the scanner and allow you to save without the need for additional drivers.

  In addition, Windows Fax and Scan cannot scan to PDF.

  Learn how to analyze with your all-in-one printer from HP using Windows Fax and Scan.

  If you have problems using Windows Fax and scan with Windows 8 make a post below. I hope this helps anyone looking for an alternative method of scanning in Windows 8.

• Scanning in an all in one

  My AIO has an ADF that will contain only 35 pages. So, if I want to keep in a single file documents more than 35 pages (IE... 57 pages) how they can all be scanned and stored in the file of the asme. I heard of merging of files but have no idea of what is or defeinately do not know how to do this. Any help would be appreciated.

  Hi tazawoo,

  I understand that you have some questions analysis about your all in one HP printer. I'd love to help you with your questions!

  According to what specific printer you have will determine exactly what your software looks like, but I'll assume you have a newer printer that uses our latest software at the moment. If I'm incorrect, please reply back with your HP printer model number .

  For this, I would recommend open on your PC HP printer Assistant (should be an icon of a printer with the name of below) and run the scan from there. With your printer ADF being able to hold 35 pages, what you want to do is put about 35 pages into your ADF since your document pages 57 and let them finish the scan. Once they have finished, place the other 22 sheets in the ADF and then on your computer screen where it shows you the scanned pages, you should see two buttons near the lower left corner. You want to rely on one that looks like a piece of paper with the symbol on it. It will then continue to feed pages and save it all in a single document in the end.

  Hope this helps, have a nice day!

• Problems scanning with c6150 all in one and Windows 8

  I have a new touchsmart from HP running Windows 8. I have an old printer c6150 all in one. I downloaded and installed the latest software and drivers for 64-bit Windows 8.

  I feel, copy and fax without problems. But when I try to scan, it freezes. It starts to scan and then just stops responding. I have to use Task Manager to quit the program. I tried the scan doctor and he says that there is a driver problem and it cannot communicate with the printer.

  Help, please.

  I solved the problem. The USB cable from the printer was not quite long enough to reach the back of my all in one computer, so I bought a USB extension cable. That works fine for normal printing, but apparently only works well for scanning.

  Once I connected the printer directly to the USB port on the computer, the scan function worked normally.

  Emilio

• LaserJet Pro M125nw MFP - scan to application all-in-One remote control does not work

  Hi gurus,

  Basically, I bought that Super-imprimante and I now trying to scan to my mobile devices.

  I have an iPad 2 iOS 7 on 2 Android devices (small tablet and phone) both running Kitkat 4.4.2

  I try to send a scan of all these devices and retrieve the output in my mobile, in fact it is quite described here and for exactly my printer model: http://support.hp.com/us-en/document/c02486319

  Unfortunately, what is happening:

  -From my iPad, the app AiO says that my printer is not compatible with the application!

  -From my 2 Android devices, the application of all-in-one remote works perfectly, except the scan function as nothing happens (well, when pressing the button 'Preview' or 'Analysis' in the Scan section, I see a button 'Cancel' for 0.1 second and I'm back to this section of the analysis)

  Could someone help please?

  

  The printer is returned to the seller.

  According to French support, the product page is fake, so I was waisting my time.