Scanning with a scanner/printer HP2050 J510

Similar Questions

• Acrobat freezes when scanning with Epson scanner in windows 10

  I upgraded to Windows 10 and installed the latest drivers for my Epson Workforce 635, the scanner, fax printer. Update of the acrobat software. Now, I am unable to scan to PDF, Adobe Acrobat pro 7.  Adobe Acrobat starts up, I see the beginning of Epson and the Acrobat stops responding.

  I've scanned in PDF format directly with the options of scan Epson, Abby Fine-reader 9.0 and Quick Books. I was also able to scan with Adobe Acrobat using the WIA driver.

  No Adobe Acrobat error freezes.

  Any suggestions?

  Hi ntanti,.

  Acrobat 7 is not more supported by Adobe & is also not compatible with Windows 10, so it is not possible to predict how Acrobat 7 will include no compatible platform.

  Please use the application in the compatible environment so that its fully functional.

  However, still you can try some troubleshooting steps, from a few Troubleshooting scanner questionscan be used.

  Kind regards
  Nicos

• My laptop is damaged after scanning with Onecare scanner

  My OS is XP Professional SP 3.

  I scanned my laptop with Onecare scanner, and since then it simply doesn't.

  Windows take forever to load, and when it finally loads, it freezes.

  I did a scan disk several times, but no result.

  Windows load fine but in safe mode and I couldn't do a system restore because it seems the restore point was removed by analysis

  I just sent it you

  Thank you

• I can't scan with my new printer Canon MP 560 mutli.

  I have a Canon Pixma MP560 printer. I use it via my home wireless hub. It prints well all computers in my house. However, I can't the scanner to work. Sometimes just with a message that says:

  Cannot communicate with scanner for these reasons:

  -scanner is turned off

  -scanner is disconnected (disconnected from the local network, if you use on LAN)

  Code 5,145,55.

  I called Canon who tell me that it is a problem of microsoft. I tried to uninstall & re - install the software, I tried to use a USB cable and also the site of "MSN" problem file such as listed by others on the forum, but none of them work. I love the printer but ot know what else to do? I'm not a computer expert, just a self taught "plodder".

  Same error reported in the following link:

  http://forums.techguy.org/networking/948268-solved-unable-scan-wirelessly.html

  In this link could software PC Tools Spyware Doctor at the origin of the problem.

  You don't have that software installed, but consider the issue may be caused by a third-party software firewall, etc..

• Cannot scan with the new printer HP Envy 5660 using Mac running iOS 10.10 Yosemite

  You just bought a new HP Envy of 5660.  Has been guaranteed by the sales staff, it was totally compatible with Mac Yosemite.  It is not the case.  The CD supplied with the printer software is not functional with Yosemite.

  I did research online and you have the printer to print wireless, printing from my iPhone and copy.  Not sure how I did TI-trial and error and 2 hours of time!

  I can't scan.  HP Web site says that their software must be installed, etc, etc, and then use the HP utility function.   Can't do because the CD is not compatible.

  Any suggestions?  I don't want really worries the printer back to Amazon.  I called HP and they said I can't talk to their Tech Department., but that's all.  Appreciate any help.  I'm not a true geek.

  Hello MB90266,

  Welcome to the HP Forums.

  I see that you have a problem with finding drivers and software for the Yosemite on Mac OS.

  I did some research for us and I found the driver/software package that the we have need.  Please click on the following link for the HP ENVY 5660 e-All-in-One Printer full feature software and drivers - Mac OS X v10.7, v10.8 v10.9 Series.

  Please email me if you have any questions or if you have any other questions.

  See you soon,.

• vertical lines when copying or scanning with my c6180 printer

  6180 all in a print is fine, just copy & fax causes the vertical black line on the side only. site filled with HP troubleshoot process - no change. Can anyone help. printer is about 2 years

  I don't know if this will help anyone, but I had a problem with a black line when fax is received or when copying through my document feeder.  The quality was very good for printing and copying via the flat glass.

  Here's what I did for a solution... copy of the elevator panel to expose the big glass, then carefully lift on the small gray bonbout charger doc Center, this will take a little effort but don't break anything.

  Once up on hinge, put your fingers on the two gray side tabs to lift the next part with the rollers.  This will now expose a small ~ 2 x 9 "piece of glass that has probably debris like mine did.  Clean with windex and closing...

  I hope this helps.  Don't throw it!

  David

• Can't print or scan documents with Canon MG2470 printer (2400 series)

  Original title: install a driver for the Canon 2400 series printer

  Hello

  I am currently not able to print or scan documents with my Canon MG2470 printer (2400 series), that worked perfectly until a few days ago.

  I tried to reinstall the software of the printer, including the driver, but the latter does not settle.  The control panel displays a yellow triangle with an exclamation mark against the Canon 2400 printer, but when I "fix" the problem, it remains unresolved.  Accordingly, my 'Cute pdf writer' is set as the default printer that is not of much use.

  Regarding documents scanning with the same printer, I now get the error code 5156.69 to come, but I don't seem to be able to solve this problem either.

  Any help on this issue would be appreciated.

  Norman

  Hi Norman,

  This problem can occur because of corrupt drivers, incompatible drivers, due to the printer settings, missing updates, and problems with the printer.

  Please follow the steps mentioned in the following link:

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I also suggest you try to install the latest version of the printer driver and software from the printer manufacturer website. Consult the following link:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg2420#DriversAndSoftware

  Please answer us on the State of the question you tio assist also.

• Scanning with HP Scanjet N6310

  I have a HP Scanjet N6310, which is connected to my end 2011 MacBook Pro running Mountain Lion. Although the scanner works well, the size of file for each analysis is ridiculously high. A scan of a page of a document is greater than 4.5 MB. When I took the same page to scan with the copier to my office, the size of the scanned page was only 50 KB. The file size of the document scanned with my scanner is ALMOST 100 x larger than the size of the file of the same document scanned at work. I checked my settings and have the preset on 'document' and not 'pictures', 'slides' or 'negative '. Something must be wrong here. Any ideas?

  That did not work. Also, I resumed repair disk permissions and I got this:

  WARNING: SUID 'System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent' file has been modified and will not be repaired.

  I don't know what that means or how to fix, but I think I may need to uninstall and reinstall my printer and scanner drivers.

  If Yes, I think that these drivers I need to install (which include the two that you referred me to in your previous post):

  1) ICA Software: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15179&prodSeriesId=3723469&prodNameId=3723537&swEnvOID=219&swLang=8&mode=2&taskId=135&swItem=cs-112996-1

  (2) HP printer drivers: http://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US

  (3) HP full software functionality: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3723537&prodTypeId=15179&prodSeriesId=3723469&swLang=8&taskId=135&swEnvOID=219

  I also think this page to propose appropriate measures, but I'm not sure: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03428470#c02917078_UpgradeToOsX10.7

  Also should I install (and then reinstall) the software for my HP LaserJet CM2320? I don't know, but the last link suggest that all drivers must be uninstalled before you download the drivers.

  Thanks again.

• When I try to scan with my CanoScan N640P ex scanner I receive a message indicating the Port to the printer that is used by another device. How can I work around this problem?

  When I try to scan with my CanoScan N640P ex scanner I receive a message indicating the Port to the printer that is used by another device.  How can I work around this problem?

  Hi ejp70,

  1. did you of recent changes on the computer?

  2. to when was the last time the scanner was working fine?

  3. you have any other printer\scanner connected to the computer?

  If you have any other printer\scanner connected to the computer, disconnect them and check if it works.

  I suggest that you uninstall and reinstall the scanner to the computer, also make sure that you install the latest drivers for scanner on Canon website.

• How can I get the charger of documents on my scanner/printer to work with bead Standard XI?  He used to work for scanning with a lower version of the standard of the bead, but now we have to scan each page of a document manually

  I have a brother MGC 8460N all-in-one printer/scanner.  I now XI Standard Adobe on my computer and my charger is not working and I have to manually analyze each page of a document.  In addition, I used to be able to tell my scanner/printer to scan to an image and it would scan pages and come as a pdf on my screen.  Now, after I get into my scanner to scan to image, I give commands to the computer.

  Hi gayannn36285186,

  You can use the option of scanning in Acrobat. There you can select source under the Options button to scan.

  Thank you

  Abhishek

• My scanner/printer Kodak 5250 well combo worked for two weeks & stopped scanning & printing & indicates does not not with Windows 7 computer

  My combo scanner/printer Kodak 5250 has worked for about two weeks and recently stopped working & indicates some Windows 7 computer communication problems.

  You can manually copy an image or a document however will this computer.
  Thank you;   Joe Bowen
  E-mail address is removed from the privacy *.

  Hello

  Make sure that you use the latest drivers for windows 7 from Kodak for her

• Scanning with HP all-in-one printer with fax and scan Windows in Windows 8

  When you install a printer driver in Windows 8, you can scan from your computer without having to install any additional software to HP. This is particularly useful if you want to or not does not require the full functionality software or if your printer does not have a driver to scan for Windows 8.

  Windows Fax and Scan uses a Microsoft Service called WIA (Windows Image Acquisition) to capture an image from the scanner and allow you to save without the need for additional drivers.

  In addition, Windows Fax and Scan cannot scan to PDF.

  Learn how to analyze with your all-in-one printer from HP using Windows Fax and Scan.

  If you have problems using Windows Fax and scan with Windows 8 make a post below. I hope this helps anyone looking for an alternative method of scanning in Windows 8.

• HP 2210 printer all-in-one: after updating WIndows 10, I can print but not scan with my HP 2210 all in one

  I've updated to Windows 10 and since then I can print but not scan with my HP 2210 all-in-one printer.  I tried to download the software updates, but nothing seems to work.  Any suggestions

  Hi @Sajapand @ddegan

  I see that you both scan problems after upgrade to Windows 10, and I may be able to help.

  Most of the products have updated software available on the HP support Web site for Windows 10.

  I also saw a few posts that say Windows 8.1 driver works for Windows 10 as well, then you could try also.

  HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning problems. I recommend you to download and run the HP print and Scan Doctor , if she doesn't fix it automatically I would know what errors or messages that you receive.

  Do you know if you are able to scan using paint?

  To perform a scan of the painting: HP Multifunction printers - how Scan: Windows 8

  (This is the same for Windows 10, of what I said)

  1. Click the Start button () in the lower left corner of the screen, click on Searchand type Paint.
  2. Click on the painting in the results.
  3. Click fileand then click on from a scanner or camera.
  4. Select your printer, click OK, and then click Scan.

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• Cannot scan with my Photosmart 7510. Installed any printer software

  Windows 7 64 bit

  After 10 hours on the phone with HP support, service Cloud and a HP escalation Manager, I can do everything except Scan.

  After that the escalation of HP Manager allows a 'scrubber utility' to completely remove all previous, all HP printer software now runs on my printer except SCAN.  From the printer control panel, it says: "make sure that the HP printer software is installed.  Since the PC when you select the HP Scan utility, is said: "HP Photosmart series 7510 not found '.

  Help please!

  This has been fixed by a HP escalation Manager today!

  Apparently, when windows is an update of security for your computer (Windows 7 in my case), it disables the ability to scan your printer because it doesn't recognize as valid a device on your wireless network and disables it so.

  We had to reinstall the printer as a new wireless printer and then 'activate' it as a scanner.  After having done that, you should have a background running which is called, "HPNetworkCommunicator.exe" process Now, I can scan the computer, as well as from the control panel of the printer.

• 5520 Photosmart, Laserjet 252dw: copy with separate scanner and printer

  I have a Photosmart all-in-one Scanner/printer and a new printer Laserjet. I am very satisfied (also pictured) quality of the laser printer, but I didn't buy an all-in-one again. So my question is, if it is somehow possible to copy of the Photosmart directly to the Laserjet Printer?

  Thanks in advance

  Hi @egau,

  Welcome to the HP Support forum.

  I understand that you have a HP Photosmart e-all-in-one 5520, printer and a printer HP Color LaserJet Pro M252 and want to send copies of the 5520 directly to the Laserjet Printer. I would like to help with that.

  There is no way to copy directly from the 5520 to the Laserjet Printer because they have no way to communicate with each other. What you need to do is scan the 5520 to your computer, and then send the scanned file to print the Laserjet Printer.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!