SCL-Z18X140

I'm trying to figure if the SCL-Z18X140 zoom will work with an F5. Specifically, auto focus and the zoom rocker. I know that this did not work with firmware earlier but I can't understand what the status is now, after the updates of the firmware.

Can anyone help? Thank you.

Literally a ton of discussions about this already... use the search function!

In my opinion, everything works except the autofocus.

Tags: Large Sensor Cameras

Similar Questions

  • can not see the stars of review and comments from clothing sites

    E.g. #1 = 'Landsend.com', click on 'man', 'pants '.
    http://www.landsend.com/IX/mens-clothing/men/mens-pants/index.html?SEQ=1 ~ catNumbers = 1 & 2 ~ 23 & visible = 1 ~ 2 ~ 1 & cm_re = D-4-8 & pageSize = 72

        Can see pants and pictures, but where the usual 1-5 *s are, it says "Rating".  I click on the "Men's Pleat Front Traditional Fit No Iron Dress Twill Trousers" (the first pants picture/option, Item # 426850-A61) and up pops all of the information EXCEPT the photo/s that should be on the left, and the "Views + Reviews" with all of the comments under that.
    

    For example #2 = "underarmour.com', 'Man', 'Accessories', ' Backpacks and bags ', 'AU Hustle Storm backpack.
    http://www.underarmour.com/shop/us/en//pid1238440-040#BV-reviews

        Can see    "****1/2* (2) Read All Reviews"   but the reviews are missing and when I click on "Read all Reviews", the screen moves down, but nothing else changes and the reviews are not there.
    

    For example #3 = "eddiebauer.com', 'Man', 'Shirts',"Classic Fit legend wash Oxford Shirt - solid short sleeve"
    http://www.eddiebauer.com/EB/men/shirts/index.cat

        Under "Men's Shirts", I see the stars and how many people have rated it [ex.- *** (17)].  If I click on the ratings/stars or on " Classic Fit Legend Wash Oxford Shirt - Solid Short Sleeve", the next page shows up-
    

    http://www.eddiebauer.com/catalog/product.jsp?ensembleId=44679 & & categoryId = 9 & categoryName = SHIRTS & pCategoryId = 2 & pCategoryName = MEN & gpCategoryId = 1 & gpCategoryName = EB & catPath = ~ ~ categoryId = 9 ~ ~ categoryName = SHIRTS ~ ~ pCategoryId = 2 ~ ~ pCategoryName = MEN ~ ~ gpCategoryId = 1 ~ ~ gpCategoryName = EB & viewAll = n & pg = 1 & cmPathInfo = null

       ...however, the stars, ratings, and comments are not there.  The picture/s of the shirt are there, as well as the size, color, add to bag, etc.
        On Amazon, I can see the ratings and comments.  This tends to be a problem with clothes companies and their customer service has not been able to tell me why I can't see what should be there.  Internet Explorer Does show the missing info; I haven't tried Chrome.  I want to work with Firefox.  Any suggestions?
    

    On the first page, next to the marking of Word, I get five sailboats (blue is good, gray is not good). This image comes from the external site "landsend.ugc.bazaarvoice.com." You can see the images if you load them directly? Here is an example: http://landsend.ugc.bazaarvoice.com/2008/2_8/5/rating.gif

    When I click through to the pants, the first image that shows on the left is this one: http://s7.landsend.com/is/image/Lands.../426850_AJ13_FF_KHA?fmt=jpeg, rgb, qlt = 80, 1 & op_sharpen = 0 & resMode = sharp2 & op_usm = 0.5, 1, 3, 0, & icc=sRGB%20IEC61966-2.1,relative & iccEmbed = 1 & rgn = 0, 0, 2000, 3000 & scl = 5.882352941176471. If you click on it directly, it works?

    If you are unable to view these images directly, sites can be blocked. Check out the first section of this article: the problems that cause to not show images.

    If you CAN not display these images directly, but not when they are incorporated on the main site of Lands End, you may be blocked "third party" images. You can check here:

    (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

    (2) in the filter box, type or paste perm and make a pause so that the list is filtered

    (3) if the value is not 1 (and the line is in bold), click permissions.default.image , then click Reset.

    If the above fails, it could be a problem to Add on. Could you try Mode without failure of Firefox? It is a standard diagnostic tool in order to avoid interference by extensions (and some custom settings). More info: questions to troubleshoot Firefox in Safe Mode.

    You can restart Firefox in Mode safe help

    Help > restart with disabled modules

    In the dialog box, click on 'Start mode safe' (not Reset)

    Any difference?

  • Satellite Pro A10 does not start (HARD drive seems to be missing)

    Hello, I hope someone can give me some advice on this problem: I have a 2 years Satellite Pro A10. Recently, it starts not at all and I noticed that if I look at directories on the C: drive using the command prompt, it said "file not found". Cannot start Windows at all, not even in Safe Mode.
    Using the recovery disks is I help spread messages as no such fixed disc and 'Extraction impossible '.
    is - that say I have:
    1 a hard drive damaged
    2. defective connections on the HARD drive? -If Yes, how I fix that?

    the system didn't crash before it happened, she doesn't have to load up when I started it.
    Would appreciate any help.

    Thank you
    SCL

    Hello

    Well, it could be a hardware malfunction of HARD drive. Yes, it is possible. But I don t think that there is a bad connection. You used this HARD over the last two years and you n t change the settings of connections on this HARD drive. Is this good?
    If it possible s so I suggest you of to completely format the HARD drive.
    Then try to start the recovery procedure.

    However if the HARD drive has a functioning default (ie. crushing of the head), so the only way is to replace this device.

  • Sony 18-252 Zoom on the F55

    I know there was a lot of discussion on this goal in the past, and I just wanted to know if people are successfully using this on the F55? Did this work entirely as a servo lens? What autofocus back? I remember there is currently a problem with that.

    http://CVP.com/index.php?t=product/sony_scl-z18x140

    I find my solution Optitek/Canon a bit tedious sometimes when I have jobs that does not (or cannot afford) PL lenses, and if I come back in light of this objective. It would be good to know if people are using and enjoying.

    If someone is selling I would also consider a used. Thank you.

    Jamie


  • NEITHER USB-8451 with external power source

    Hi all!

    I try to understand for 2 days now why my USB-8451 gave me a 301740 error: line SDA or SCL or both are in poor condition, or there is no pull-up resistance.

    I try to change a multiplexer channel in order to obtain a measure of the temperature of a sensor. I checked my SDA and SCL lines, thye are both in top condition and I have 2 resistors to pull up with a value of 10K.

    The only change with my older circuit, is I use an external power supply for my chip and a PCA9543 (texas instruments) MUX to select the sensor I need the data.

    Any who have encountered similar problems?

    OK guys,

    Apparently, the ground of my usb-8451 was not related to the land of my diet, it doesn't yet but my components react!

  • violation of synchronization non-diagramme

    Hi guys,.

    I use the sbRIO9651 for the testing of a Prototype. I use the CFG (the Evalboard DevKit) file to create some signals to write to PMODx

    In any case even I have written true or false constant wire PMOD (PMODx_pinx_out) combined with preconfigured PMODx_pinx_enable = true, I get a Timing Violation.

    I can write to a WRC Signal without error - wrote to two pins of the WRC, I get the following sync error: (see attachment)

    In the other screws, I also had this violation of timing.

    I was looking for this problem in the forum, but I couldn't find a solution.

    -Hybrid mode is not available for sbRIO9651

    -"Multiples of the same node using I/O leads to problems of timing."

    I come to write after the IOS

    -The problem is other than screws, so it is not logical to add my VI - is still the same signals with timing error

    -Violation of Timing is 8 ns (125 Mhz =) 0.02ns-> my VI lack didn't need this speed

    I tried my VI to reduce to 1 MHz to SCL

    I tried to pipelineing

    -The problem is 'EMIOENET1GMIITXD' and 'ENET1_GMII_TXD '.

    which is Ethernet. I don't activate him to the FPGAS.

    I just found in CFG ETH2 cannot be activated. So its use, but I guess because the RT Linux on ARM Core of architecting

    So why has compiler Xilinx a problem with the ENET1 STATE TXD?

    ----

    the VI_example.png is the latest version without logic. -However, there is the same error of timing.

    Why can't write on the PMODx?

    Thanks for the help!

    Best regards

    Florian

    Problem solved!

    After some research for the warning of the ETH, I noticed in my full installation of Labview2015 that the project just CLIP generator generate in

    LabVIEW v1.0 2014 (http://www.ni.com/product-documentation/52833/en/#520648_by_Date)

    (I installed only Labview 2015)

    Open the Clip generator outside the 'V2.0 Labview 2015' project appeared. (We just opened to see what version is available)

    After having reopened my project all the generated items are listed in V1.0 - could not be changed in V2.0 (!), but when I generate a new element in the project there are now just V2.0 Labview 2015 has allowed to choose! V1.0 is not in the list more!

    -> DevKit is version 1.0 Labview 2014

    -> DevKit2 is in Version 2.0 Labview 2015

    If it was a configuration error.

  • LM92 with NOR-8451 I2C temperature sensor

    Hello!

    I try to communicate with a temperature sensor LM92 via the NI USB-8451 box by I²C Protocol. I have a problem with the address because the sensor 7-bit address is 1001011 (A1 and A0 set to 1) but the LM92 works in little endian (LSB first) and Labview adds the R/W bit at the end of the address, so that full frame sent to the LM92 is 1001011R/W.

    I'll try to find a solution to reverse the complete frame before seending to communicate with the LM92.

    LabVIEW returns the 301742 error because the address is not the wright one and I can't find how to send the address in little endian.

    I just need to read the record of the temperature of the sensor so I need to write anything in it.

    Does anyone have an answer?

    To solve the problem:

    The problem of addressing is not the address sent in Big Endian, my LM92 was on a Board and a pilot forbade LM92 sensor to connect with my USB-8451 (I don't know why yet).

    So I unsolder just my LM92 and improvement directly + 5V SDA SCL and GND wires on him and it works with examples of Labview you will find in HELP from-> examples

    Thanks for trying to help me MrHappyAsthma !

  • "labview can't stand this VI.

    Hello

    I am pursuing a project made 3 years ago. The guy who did me a lot of VI for the project. My problem is with some VI, labview can't stand the (such as the file.vi of open_creat_replace). I insert an image of the block diagram.

    I already made some changes regarding the acquisition of data, because now I use DAQmx (he used the traditional DAQ). Is there a VI to do the same thing for the recording of data? the other problem I have is that it saves the data to a file with the extension. Is SCL, still possible in labview 8.2? This is important because I need a file. SCL to other VI.

    Thank you very much for your help, I tried to find the solution but without success...

    Sophie

    I finally found the solution by mixing examples and the VI of the man in front of me. I am trying to write to a binary file using these examples: .vi Cont acquire & voltage - graphics file (binary) to save my RAW files and acquired graph of the binary data for the beginning of my other VI to extract data.

    Sophie

  • 301742

    I use the USB-8451 to communicate with the chip ISL25700 through LabVIEW. The ISL2570 uses the I2C interface. I'm reading the chip using the general reading code provided with the interface. I get the error code 301742. The address of the device that I use is 00 h, I got from the data sheet. The circuit I use is the circuit of application contained in the plug with resistances of pull-up on the SDA and SCL lines. I don't know how to solve the problem. I was also wondering how to choose a particular register to read and write from. The plug is attached to the ISL25700.


  • Server spam 2007

    Hello world

    If I have some problems with my server running Exchange 2007. What has happened is that we had a large volume of spam coming lately, so by using Exchange 2007 anti spam tools I have developed actions for SCL and such. The problem I encountered today, however, is that each email now sent from a mailbox in the server is marked as spam. For example I have tried sending a test of my company e-mail message, both my personal gmail and hotmail and both mark sender as spam, for me and each box the mailbox on the server. I have not touched anything outside of anti-spam rules and hub transport rules, and it was not a prerequisite to problem so I don't know what to do. Little help would be greatly appreciated. Please keep it simple as I am rather new to this and step by step instructions on this subject would be greatly appreciated!

    See you soon,.

    Rhys

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *
  • Implementation of I2C in FPGA on SOM devkit

    Dear all,

    I have this sbRIO 9651 SOM with jury of carrier of reference with which I would like to connect a sensor of MPU 6050 Pmod 5 and acquire sensor data in an FPGA VI and process data in a RT VI. I find it difficult to implement I2C interfacing to FPGA as I am relatively new to FPGA programming in LabVIEW. MyRIO implementation was pretty easy as the API and usage example it was easy to access. Any help would be appreciated.

    Concerning

    Guenoun

    Hello

    I found this documentation to be very helpful:

    https://decibel.NI.com/content/docs/doc-41410

    She described the meaning of in, out and activate. SCL clock series, SDA is given in series. In and out are to read and write data, activate switches between being an input or output pin. It is what explains the wiring in this post on the forum: https://decibel.ni.com/content/message/127591#127591

    The I2C bus is high when idle, so out is set to false (bass), but this has no effect because enable is false. In order to drive the bus low, enable is set to true. Now has an effect and driving the bus low. If the bottom of the bus is set to true to activate while the output is held low literacy.

    I hope this helps you.

    Alex

  • If I uninstall Microsoft Visual C++ 2008 Redistributable - x 86 9.0.30729.6161 what happened?

    If I uninstall Microsoft Visual C++ 2008 Redistributable - x 86 9.0.30729.6161 what happened?

    Hi Muhamad,

    The Package Microsoft Visual C++ 2008 Redistributable installs runtime components of Visual C++ libraries required to run applications developed with Visual C++ on a computer that does not have Visual C++ 2008.

    This package installs runtime components of the libraries C Runtime (CRT), Standard C++, ATL, MFC, OpenMP and MSDIA. For libraries that support side-by-side deployment model (CRT, SCL, ATL, MFC, OpenMP), they are installed into the native assembly cache, also called WinSxS folder on the Windows operating system versions that support side-by-side assemblies.

    For more information, you can post your request in the MSDN forums.

    http://social.msdn.Microsoft.com/forums/en-us/vcgeneral/threads

    It will be useful.

  • Problem Manager of horizontal scrolling for OS 6.0 and more?

    Hi all. I have a problem with the Manager of Horizontal scrolling. Every thing worked for OS 5.0 and below, the question arises for OS 6.0 and more. For example, check the following:

    I have 2 HFM added to the optimization of resources.

    HFM1 - contains 2 buttons.

    HFM2 - contains 6 buttons, and the user can scroll between the buttons.

    The questions is when user keep hitting the right key, when the focus is on the second button of HFM1, then the content of HFM2 scrolls to the right - what is bad behavior.

    Check the screenshot for Simulator 9810 (when scrolling to the right inside the HFM which contains the test1, test2 scrolls the second HFM):

    Scrolling in a managing scrools in another, why this happen and how that might be solved?

    Thank you in advance.

    Finally, I found a solution using ScrollChangeListener (SCL).

    So what I did I set the SCL for HFM2, then:

     public void scrollChanged(final Manager manager, int newHorizontalScroll,
                int newVerticalScroll)
        {
    
            //----> fixing the issue when one HFM scroll another one for OS 6.0 and above
            int fwf = manager.getFieldWithFocusIndex();
            if (fwf == -1)
                manager.setHorizontalScroll(0);
            //<---- fixing the issue when one HFM scroll another one for OS 6.0 and above
    
    }
    

    Thanks to all in any case.

  • More than a return after a particular character substring

    Hi all

    How can I get a substring more after the two points to return. IE send_break_action/scl/for the 192.8.59.1:/host:/scl:/sc2 example above

    I want send_break_action, /sc1, /sc2 and so on

    With this query, I get only first for

    with data as (
    select '192.8.59.1:/host:/scl:/sc2' fld from dual
    )
    select fld, regexp_replace(fld, '[^:]*:') fld2
    from data;
    

    FLD 192.8.59.1:/host:/scl:/sc2 Chp2 /sc2

    and with

    select substr('192.8.59.1:/host:/scl:/sc2', instr('192.8.59.1:/host:/scl:/sc2', ':') + 1) from dual;
    
    

    / Home: / scl: / sc2

    Thanks in advance for any help

    If you are sure there are only 3 values you want as Fld1, Chp2 Chp3

    with data as (
    select '192.8.59.1:/host:/scl:/sc2' fld from dual
    )
    select fld, regexp_substr(fld, ':[^:]+',1,1) fld1,regexp_substr(fld, ':[^:]+',1,2) fld2,regexp_substr(fld, ':[^:]+',1,3) fld3
    from data
    
  • Trace file has many references obj # but this oppose is nowhere in SQL statements

    Hi all

    Oracle 11.2.0.3 x 64 on x 64 Linux.

    No CARS.

    I have a trace file (captured with lie = true, wait = true) where inside, I have a large number of obj # references for the object that is not in the above trace file nowhere.

    Example of part of the trace file:

    ...

    PARSING IN CURSOR #22 len = dep 52 = uid 0 = 46 oct = cover 3 = 46 tim = hv 43179827168145 = ad 1014772292 = "c00000023baba230" sqlid = "amqq2ncy7sck4."

    Select TNC in PF_TRX where (CTN =: b0 and ROWNUM = 1)

    END OF STMT

    ANALYSIS #22:c = 0, e = 17, p = 0, cr = 0, cu = 0, set = 0, r = 0, dep = 0, og = 1, plh is 2442708035, tim = 43179827168144

    LINKS FOR #22:

    Link #0

    oacdty = 01 mxl = 32 (25) = 00 mxlc bad = 00 = 00 = 00 pre scl

    oacflg = 00 fl2 = 1000000 frm = 01 csi = 32 off siz = 32 = 0

    kxsbbbfp = 9fffffffbf5faba0 = 32 avl bln = 10 flg = 05

    value = "0606015172".

    EXEC #22:c = 0, e = 94, p = 0, cr = 0, cu = 0, set = 0, r = 0, dep = 0, og = 1, plh is 2442708035, tim = 43179827168314

    WAITING #22: nam ='SQL * Net message to client' ela = 1 driver id = 1413697536 #bytes = 1 p3 = 0 obj #= 775422 = 44216143020385 tim

    FETCH #22:c = 0, e = 13, p = 0, cr = 2, cu = 0, set = 0, r = 1, dep = 0, og = 1, plh is 2442708035, tim = 43179827168378

    "STAT id #22 = 1 cnt = 1 pid = 0 obj = 0 op = pos = 1' STOPKEY COUNTY (cr = 2 pr = 0 pw = time 0 = 0 US)"

    STAT #22 = 2 cnt = 1 pid = 1 pos = 1 obj id = 8236 op ='INDEX RANGE SCAN PF_TRX_1IX (cr = 2 pr = 0 pw = time 0 = 0 US cost = 1 size = 11 card = 1)'

    WAITING #22: nam ='SQL * Net client message' ela = 135 driver id = 1413697536 #bytes = 1 p3 = 0 obj #= 775422 tim = 44216143020630

    ...

    obj #= 775422 is an index into a schema user wealth of paintings, consideration of related things.

    But the picture, who own index which is never mentioned in the trace file all (DDL, DML, or Select statement).

    TKPROF does not display as well without the presence of this table.

    How to interpret these topics, as registrations in the event of mine is the biggest event of waiting.

    THX,

    Damir

    «SQL * Net message to client "is in fact a wait on the BONE (layers TCPIP).»  Oracle is not clear when the package reaches the customer, he knows only that she has presented the package to the TCPIP services provided by the operating system on the database server.

    Hemant K Collette

Maybe you are looking for

  • Satellite Pro L100 - where can I get a battery?

    It gives me an error on the battery indicator that the battery needs to be replacedWhere can I get a battery

  • HP 8300: My motherboard supports 95w TDP?

    Hi people. Does anyone know the specs of my motherboard? (The HP Elite 8300). I would like to know if it supports a 95w TDP. The HP Elite 8300 has a card mother "Hewlett-Packard 3396' and is currently mounted with an i7-3770 (which has a 77 w TDP). I

  • HELLLPPP - a Section of Installation of Service in this INF is invalid?

    HELLLPPP - a Section of Installation of Service in this INF is invalid... My sony mp3 is not recognized by XP SP3 2002 when connected via USB. I get this error after you follow the instructions recommended to update the driver through my control pane

  • Which free antivirus for vista 64-bit?

    Hello I run my 32-bit vista & McAfee for more than 18 months. I intend to do a clean install of vista 64-bit and would be very grateful for advice on viral protection. First option: continue with the paid version of McAfee & I wonder if that supports

  • How to reduce the Viewer window to display the commands in mode full screen?

    When I go to full screen in windows Viewer it doesn't return to normal size or show all controls, also if I slide down to close app it goes to the start screen, but when you go back to the desk top it goes back to win Viewer full screen. I bring up t