Score works do not (here 8440p)

Hello.

I just bought a used HP EliteBook 8440p.  The laptop seems well apart from a question; the pointing device does not work.  The buttons for the pointing device does not work, does the touchpad and buttons.

If I open Device Manager, I see an unknown device under "Other devices" (I'm not using an English version of Windows, so my translation can be turned off).  If I check its properties, it says "PCI bus 68, device 6, function 2.  Maybe it's the pointing device?  If Yes, where can I find the correct driver?

I installed the driver for the Synaptics touchpad, but it did not help.  The OS is Windows 7 pro 64-bit.

Any help would be appreciated.

Never mind.  The problem was that the cable Ribbon for the pointing device, had been inserted into the motherboard slightly through support.

Tags: Notebooks

Similar Questions

  • EliteBook 8440p; DM1-3020us: 2x4gb 1600 MHz DDR3L works in Pavilion DM1 but not Elitebook 8440p? But both are supported than 1066 MHz RAM

    I have two Elitebook 8440p PCs that both run an Intel i5 520 m (although one of them has a discreet Nvidia NVS 3100 m, while the other does not and use the integrated graphics card Intel).

    I also have a Pavilion DM1-3020us with an AMD E-350 APU; It's the only other PC I own which takes SO-DIMM DDR3 modules.

    I just bought this Crucial DDR3L 1600 MHz 2x4gb hoping to use it with the 8440p without the graphics from Nvidia:

    http://www.BestBuy.com/site/crucial-2-Pack-4GB-1-6GHz-PC3-12800-DDR3L-so-DIMM-Unbuffered-non-ECC-lap...

    However, it causes crashes and BSOD as soon as he tried to start under Win7 64 bit on both 8440 p PCs.  Also when trying to boot Linux Mint 18 I empty a kernel panic, and run Memtest86 + just leads to restarting the PC within seconds.  Yet, I can navigate through the BIOS throughout the day and it will continue to work very well...

    But here's where it gets really weird - the RAM works perfectly fine in my laptop DM1 Memtest86 + and Win7 64 bit (I use it as I type this).  What's curious?  Because both the AMD E-350 and the Intel i5 520 m only support up to 1066 MHz RAM!

    The only thing I can think is that there is something wacky where RAM is unable to operate at 1066 MHz at 1.5V or is not able to run at 1.5V to all E-350 1.35v support (and 1.5V RAM so that the i5 520 m only supports 1.5V) which itself would be really strange that Micron (which actually manufactured the RAM) States on their website that their 1.35v and 1.5V RAM have actually the same die (a bit like mobile i7s quad vs quad I5S Office) and that both can operate at 1, 5V, implying therefore that the 1.35v product is simply a higher binning:

    https://www.micron.com/~/Media/documents/products/technical-note/DRAM/tn4114_ddr3_1_35v_1_5v_compat...

    Crucial live chat support, however, closed several hours for the day, so I thought I would at least make this post in the meantime.

    Hello:

    Please see this thread, and the discussion that I posted in this thread... and you'll have your answer.

    6550 b has the same chipset as the 8440p.  I posted the link to the site from NewEgg for the memory, you need to buy if you live in the USA/Canada in the discussion that I've referenced to the other person who had the 8440p.

    http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/RAM-memory-modules-that-actually-work-for-HP-EliteBook-8440p/m-p/5570634#M335108

    There are several discussions on this issue if you want to find even more.  Everything is solved by specific G.Skill memory I posted.

    The extent of why it works in the dm1 and not the 8440p, the chipsets are different.  The Intel chipset in the 8440p doesn't support voltage DDR3L.  Comparison of AMD and Intel chipsets are like comparing apples and oranges.

    I also believe that the chipset amd in the dm1 is more recent than the chipset in the 8440p and promotes low-voltage memory.

    I have just return from memory and use the gift card on something else.

    I doubt that Best Buy has this specific memory.

  • 1st generation ATV dead. Orange light but no screen and no resetting of distance.  I tried direct connection to Mac and iTunes open and he's not here.  Is it possible to restore to the factory without screen or remote work

    1st generation Apple TV is dead. Orange light but no screen and no resetting of distance. I tried direct connection to Mac and iTunes open and he's not here. Is it possible to restore to the factory without screen or remote workin

    I guess you tried maintained low men together for about 6 seconds - silver 1 ATV that will restart to the diagnostic partition but who would rely on the hard disk is functional and if it was ok that wouldn't work with the logic board failure.

    I guess you have not fed and attempted to restart.

    In case your AppleTV think it is paired with another remote try Menu and left arrow for 6 seconds - the light now intervenes when you press the buttons on the remote?

    Also, it could be in the video mode bad - try Menu and upward arrow together for 6 CES switch video modes, but implies that he actually started OK.

  • DV9930US. internal Microphone does not work do not (Vista and Windows7)

    Hello

    I had my DV9930US for awhile, but until recently, I've not used the webcam or microphone internal.

    I am preparing for a trip, so I thought I'd see if I could get something like Skype Setup, but I find the internal mic doesn't seem to work (do not hear anything).   Audio output seems to work very well, and also if I plug an external microphone on taking forward, under the keyboard, which seems to work... it is just the internal microphones (there are two, I think, at the top of the screen, which surrounds the webcam) which do not work ...

    Everything looks ok in Device Manager.  Under 'Sound', I have "Realtek High Definition Audio".  The driver is dated 15/01/08, V6.0.1.5548.

    I tried to test it with sound recorder, I also tested the microphone 'configure', but it never shows all the bars and the Sound Recorder file records is essentially silent.

    I still have the original Vista Home Premium on this machine and also Windows 7 Ultimate (I double boot), and even the original Vista seems to have the same problem.

    I've seen a few posts here with problems with G60s, but no resolution, so I was wondering if anyone might know which

    Perhaps the problem is?

    Thank you!

    Jim

    Hello

    For the record, I finally found the problem.

    In the DV9930US, there is a small PCB (1 "x 1"), called the "of the power button.  This is the power button, and 3 pin connectors, as well as a flat cable connector.

    The microphones under the screen to connect to a 3 pinned connectors, and the flat cable is going, I think for the real sound card.

    I had replaced the pickups, which does not solve the problem, so I bought the replacement power button that fortunately, came with a new flat cable.

    It turned out that the original flat cable from the power button on the audio card was bad.

    I replaced the flat cable, and then worked the internal microphones.

    Jim

  • Camera work is not on Windows 10

    Hi, after installing Windows 10 on some PCs, I have no access to the camera on them in Skype. If I open the camera app, it works and not exceeding not black comes from the camera when using Skype

    I can see the camera as in the forecast program of Skype and Skype on the WEB. If you check on permisions them privacy camera on Windows, Skype is not in and overview of Skype is here

  • Re: C510 black eStation ink cartridge work do not

    Frustrated REEEEEALLY. After screwing around all day trying to get stuff printed I sit tonight with a new black ink cartridge and it's either not all black printing or it is a pale gray. All other cartridges work. Come here, when I click on links to every possible solution nothing opens for me. Before anyone asks, this printer is about 2 or 3 years, but had BARELY BARELY BARELY served. It is connected to an HP computer that is only a few years old with exceptionally light use also. I installed the updates that were available. He printed some photos fine this am, but I'm trying to print documents has put me in such a rage today I had better just go to bed. Warranty is out, so much for spending money on a printer expensive in the hope that it would last. Hope this will be a quick solution. It's really annoying to keep buying new printers all the few years despite them get such use of the lamp

    Hi @Furbio and welcome to the Forums of HP!

    I'm sorry to hear you had so much trouble for your C510 to print in black, but I will certainly do my best to give a helping hand

    Because you mentioned that you have questions, open links of the forums, I'll have everything written here in my post, so I apologize in advance for how long this post can get!

    First of all, I would like you to clean the contacts on each cartridge by following the steps below taken from the document a "incompatible cartridge" or "not compatible ink cartridges" Error Message on the computer or the all-in-onefor your printer. "

    Follow these steps to clean the electrical contacts of the cartridge.
    1. gather the following items:
    Clean cotton pads
    Paper clean and lint to rest the cartridges on (coffee filters work well)
    2. press the power button to turn on the printer.
    3. open the cartridge access door. Lift the corner front right of the printer until it locks on the door in the full open position. Wait until the print carriage to move toward the center of the printer.
    4. press the tab on the front of the cartridge to release it, then pull it up and out to remove it from its housing.
    5 hold the cartridge by its sides with the nozzle facing up.
    6 locate the electrical contacts on the bottom of the cartridge. The electrical contacts are four small rectangles of copper metal.

    7 wipe the electrical contacts with a q-tip clean and dry until no debris remains on them. Make sure that no ink or debris from the smear on the transparent window next to the electrical contacts.
    8. place the cartridge on the clean and lint paper with the nozzle upward.
    9 locate the electrical contacts inside the carriage. Electrical contacts are similar to a set of four copper color placed pins to touch the electrical contacts on the cartridge.
    10. clean the electrical contacts inside the car with a clean, dry cotton swab, second.
    * Please do for each cartridge, just to be complete
    11 drag each cartridge into the slot that is appropriate until it snaps. Make sure that you insert each cartridge into the slot with the corresponding color icon.
    12. close the cartridge access door.

    After completing these steps cleaning cartridge, if the problem still persists, I would like to manually clean the electrical contacts on your print head (the part the cartridges sit in inside of). These measures were taken from the replacement print head for your printer paper (with a few changes to make things more clear ).

    Follow these steps to clean the electrical contacts on the print head and inside the printer.
    1. press the power button to turn on the printer, if it is not already selected.
    2. open the cartridge access door. The carriage moves to the center of the printer. Wait that the carriage is idle and silent before proceeding.
    3. to remove the cartridges, press the tab on the front of the cartridge, and then pull it upwards to remove it from its housing. Do this for each cartridge.
    4. to remove the print head, lift the locking on the carriage to the stop handle.

    5. place the print head on its side on lint cloth or absorbent paper and use a fluffy and filtered/distilled water to clean the electrical contacts inside the printer as shown below.



    6 proceed to clean the electrical contacts of the print head as well using the same materials. Just be careful not to touch the contacts with your fingers.

    7. once everything is dry (try not to let the printhead out for more than 10 minutes if possible) please proceed to reinsert the printhead to the printer and gently drop the locking handle to fix it up before you reinsert the cartridges and close the printer.


    When the printer is finished it is maintenance, try to print a report to see if the black is printing printer or if something has changed with the next steps in the document printing to a printer status report for your printer.

    1. In the home screen on the product control panel, press Menu () in the upper left corner. A list of menu options screens.

  • HP Pavilion 15-p000: Microphone does not work do not

    My computer is a HP Pavilion 15 - p000 CTO Notebook PC (ENERGY STAR). I bought it recently and today I tried to communicate via Skype. The friend could hear me, so I checked the built in mic if it worked or not. I trouble shoot the issue, he said that everything works.  Someone please help I don't know what to do anymore .

    Hi @kikxter,

    Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your HP Pavilion Notebook 15-p000 and the problems with the microphone and Skype does not. Hereis a link to download a new version of Skype, which may help to solve the problem. Please uninstall your current version and restart your computer before installing the new version.

    Here is a linkto Skype help under technical questions.

    I hope this helps.

    Thank you.

  • Network adapter (device Bluetooth (Personal Area Network) and Btooth works does not after installing W 7 Ultimate__ (Situation Reported to microsoft Hel and Support under SRX1120597135ID Without solution untill today))

    BTooth works do not after Windows Vista upgrade (Btooth works without problems) for W7
    At the moment I have problems connection BlackBerry device and other devices via Btooth
    messages 1: 'softwarfe device driver was not successfully installed ".
    message 2: "WIDDCOMM Bluetooth Software 6.1.04403 Dell Incompatible" (WIDCOMM = Broadband - manufacturer)
    In short, the list obtained messages:
    1 device driver software was not compatible
    2. incompatible software Bluetooth
    3. the drivers are not installed: lists of codes (31) (28) (10)

    Report of the final situation for Microsoft Help and Support under SRX1120597135ID (withoutany positive response so far, I have been asked to report through this forum, I hope a solution will be here)
    I tried all the options you will find in google without success.

    I contacted Dell and Bradband and I have upgraded to WIDCOMM Bluetooth Software 6.2.0.6600 available in Dell Support without positive results.

    Repost: Windows Update has nothing to do with the upgrade of Windows. Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7hardware/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • I'm not here in europe, and I can receive messages in Outlook Express, but can't send mail.

    I'm not here in europe, and I can receive messages in Outlook Express, but can't send mail. I get a box asking my user name and password. I enter the information, but the box returns. Is it because of the outgoing server settings. * E-mail address is removed from the privacy *

    Probably means that the outgoing must use the authentication settings, see pages for the help settings your email providers.

    Or as a work around for connect you to your web mail, browser access page in the

  • Left mouse button doesn't work is not on my laptop

    My left button of the mouse is suddenly no longer works on my laptop. Instead of the function of click, she appeared a little icon of 2 triangles with a dot in the Middle, and they were in the circle.  Instead of click, it scrolls vertically on the page.  Now, it does nothing when I click on the left button of the mouse.

    I checked my settings of the mouse and the left button is set to "Click" according to its function, not scroll or anything else. I just started this suddenly, doing without all the parameters being modified.

    Can someone please? It's driving me crazy. Thank you very much!

    PS - I have a Toshiba, but I think this is not the laptop, it's Vista (?)  Also, I have not installed anything recently, etc..

    Hello

    Try the system restore before that happened:

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
    ==========================================

    If necessary: (make sure that you have restarted at least once, if the above did not work)

    Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
    Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
    on the TouchPad and UNINSTALL.

    Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

    This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

    Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
    http://support.Microsoft.com/kb/310575

    Then go to the system manufacturer's website and get the latest touchpad drivers.

    Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

    Toshiba downloads - access your model.
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

    ================================================

    Toshiba has also map of keys which allow easy adjustment of the TouchPad. See Toshiba and Forums Support.

    Toshiba downloads - access your model.
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

    Toshiba - Forums
    http://laptopforums.Toshiba.com/

    Toshiba - Contacts
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

    Toshiba - drivers - access your model
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

    Toshiba - Support
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    Check with the manufacturer of system support, documentation in line, and/or forums he has probably shortened that
    enable and disable the touchpad functions.

    Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
    and some come with a utility that loads in the Notification area next to the clock in the bottom right.

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Sharing works do not Internet connection

    OK im trying to make my computer vista laptop wireless for my xbox 360 and im struggling to try to leave Internet connection sharing when I go to propities and go to the sharing, I have the box that says allow other network users to connect through this computer's internet connection I click on it and click ok , then it opens with an error message indicating an error occurred while the connection was activated and it does never time I try and select it ive tried something different and looked online and can't find someone with the same problem or answers as to the difficulty that I even tried bridging the connections and it did not work im not sure if its because of my computer is connected to a router im trying to use my computer and wireless ICS were like this, it will only work if it was connected to the local network

    Hi rhawley64,

    Thanks for posting on the Microsoft answers Forums.

    Have you tried to connect your XBOX to your computer via a wired connection?

    1. first of all, have turned on your Xbox. Also have your PC on, because this next part is everything with the computer. It will probably work with a wired connection as well (but you could probably just hang to the top your modem or router then), but here it is. First go to start and go to your control panel. Switch to Classic view using the link in the upper left corner of the window. Find the network connections and open it.

    2. you should see a "connect to the Local network' (or disconnected, it's to connect to the Xbox) and your internet connection (mine is called"Wireless network connection"). Connect the Ethernet cable to your laptop and the back of the 360. Select the 'connection to the Local network. After it is connected, turn off your internet connection. Once it is disable right-click the internet connection, and then click Properties. Go to the Advanced tab and check "allow other users of the network to connect through this computer's internet connection". Allow that this ends, it may take a little bit. Once this is done, your internet connection should say shared next to the State of the connection.

    3. check your internet connection. Once it is fully connected, right-click to 'connect to the Local network' and click on repair. Allow only at the end. On your Xbox, find the system control panel and browse until you find 'connection to Xbox Live Test. Test the connection. If it works, congratulations, you don't need this next part. For some, at this stage, they get a DNS error. There are a number of ways to solve this problem.

    4. you must have a connection to a router. To browse the internet once again, you must disable the "connect to the Local network' and then to repair the Internet connection (follow the steps above to activate it again once you have finished). Go to http://192.168.0.1. You will be asked for a connection. On most routers, this is:

    User name: admin

    Password: (no password)

    If this does not work, look for the login information for your model of router. Once connected, you have to find where your server DNS IPs would be listed. On the top bar, click State. Under WAN, you should find DNS IPs. Manually enter them into your Xbox (rather than have it find automatically) and test your connection again. At this stage it should work. Any other error can be search online.

    After following the steps above you have established a wireless via your computer with your Xbox?

    Please post back and let us know if this information was useful to solve your problem or not, so that we can help you if necessary.

    Robyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • my microsoft work does not work error message that I need to reinstall, but I don't have a disck because it was already installed when I bought at walmart

    I bought my dell computer 2009 Wal-Mart, that he has is already set up with windows vista basic... and now my microsoft works does not work it says I have to reinstall.  However, he is not come with a disc. so, how can I do without having to buy a disc

    Go here: https://smartsource.dell.com

    This is where you go to download programs that have been installed on your computer that you do not have a CD for.

  • G4-1303AU of the HP Pavilion: HP my laptop works does not properly after installation of window 7ultimate 64-bit

    This laptop is provided by UP Govt (INDIA). I installed windows ultimate 64-bit, 2 days ago and installed all the drivers. But there are two pilots who is errors. These are some

    1)PCI device- ERROR IS- the drivers for this device are not installed. (Code 28)

    Hardware ID is

    PCI\VEN_10EC & DEV_5209 & SUBSYS_3564103C & REV_01
    PCI\VEN_10EC & DEV_5209 & SUBSYS_3564103C
    PCI\VEN_10EC & DEV_5209 & CC_FF0000
    PCI\VEN_10EC & DEV_5209 & CC_FF00

    2)Ethernet Controller- ERROR IS - the drivers for this device are not installed. (Code 28)

    Hardware ID is

    PCI\VEN_10EC & DEV_8136 & SUBSYS_3564103C & REV_05
    PCI\VEN_10EC & DEV_8136 & SUBSYS_3564103C
    PCI\VEN_10EC & DEV_8136 & CC_020000
    PCI\VEN_10EC & DEV_8136 & CC_0200

    My main problem is this laptop is hangig too permanently. I do not know what is the exact reason and how do I... Its heating not so it's null chance of warming... I want to get rid of this problem of hanging. Please give me link to download the real drivers and the solution for this problem of hanging... As it was not hangig earlier on Windows 7 Home Basic (provided by Hp)

    Hello:

    Here are links to the drivers you need...

    PCI\VEN_10EC & DEV_5209:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103100-1&cc=us&DLC=en&LC=en&OS=4063&productOid=5280050&sw_lang=&product=5280049

    PCI\VEN_10EC & DEV_8136:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100079-2&cc=us&DLC=en&LC=en&OS=4063&productOid=5280050&sw_lang=&product=5280049

    The only suggestion I can offer regarding the laptop works is not so good is to download and install the drivers for the chipset amd from the link below and restart.

    http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  • After installing Vista Ultimate, thinkpad r61 connection Wi - Fi doesn't work do not

    installed vista ultimate, now Wireless does not, ethernet not tho, thinkpad r61, had professional vista prior to upgrade, wireless worked fine, wireless adapter: wifi link 4965 AGN, yes a driver updated, done Yes ms dignostics, 1 other thing tho, cannot turn on the wireless radio.

    Wireless connection not working do not, after installing windows Ultimate edition, may depend on a wireless radio.

    Disable anti-virus and firewall (for now) and check if it's anti virus causing the problem.

    Another thing, you can try:

    Uninstall the card drivers wireless network from the Device Manager , restart the computer and let the operating system to install the generic drivers.

    Wireless works fine now?

    Now, visit the support IBM (drivers and downloads) page, enter your model number and download the drivers wireless on your desktop.

    FYI, here is the link:

    http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-67856

    Install the drivers in administrator mode.

    P.S Make sure wi - fi on the laptop button is turned on...

  • USB doesn't work is not on the external hard drive

    I have Vista Ultimate and here I noticed recently USB not working only not on the external hard drive. I tried to update the drivers and the system responds with the most recent driver already installed. Verified the USB ROOT property and shows nothing when it comes to th Ext. HD but it sees the usb hub and head phones. An organization can help its driving me crazy!

    Hi Chaser07,

    Follow the instructions below that may help you resolve the issue.

    Method 1:

    I suggest you try to use an external hard drive on another USB plug and check if it works.

    Method 2:

    Automatically diagnose and repair problems with the devices when the Device Manager does not detect your hardware, audio, USB, or other devices, or when your devices are disabled or does not.

    Click run now in the link below to diagnose and fix problems automatically.

    Hardware devices not detected or does not

    http://support.Microsoft.com/GP/hardware_device_problems

    Check whether the problem is resolved.

    Method 3:

    Click on the link below to run Fix it which will help you to solve the problem.

    Tips for solving problems of USB devices

    http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx

    Check whether the problem is resolved.

    Method 4:

    Click on the link below and install the update.

    Rollup cumulative update for USB in Windows Vista Basic components

    http://support.Microsoft.com/kb/941600

    Please post back and let us know if it helped to solve your problem.

    Kind regards

    KarthiK TP

Maybe you are looking for