SCP behind the ASA 5505 may not help ping an internet address,.

There must be a problem of ACL configuration.  How to configure the ASA 5505 so that computers

behind an internet can ping 4.2.2.2 such IP address or www.google.com.

Thank you

David

If you have no ACLs on the external interface, please use the following command to allow ICMP through the ASA.

fixup protocol icmp.

So try and ping. Let me know if this helps.

Also, please give us a little more in detail so that we can understand and help you better

See you soon,.

Nash.

Tags: Cisco Security

Similar Questions

  • Just bought a Panasonic Viera TV and seeks to link to my mac.  The operating instructions do not help.  Any thoughts welcome

    Just bought a Panasonic Viera TV and seeks to link to my mac. The operating instructions do not help. Any thoughts welcome

    You have two ports thunderbolt on the end 2013 iMac, but not HDMI port. You will need a mini DisplayPort to HDMI adapterand a length of cable HDMI to your TV. If this TV is a model of 4K, then she might want more recent HDMI 4 K wiring (1. 4 (b) specification. You may be able to pick up this adapter to a local Apple or computer store.

    I have a length of HDMI cable connected to my TV (not a Panasonic) with the mini adapter DisplayPort to HDMI adapter connected to it. I turn on the TV and changing to that HDMI port, then turn on the Mac. My Mac screen is duplicated on television. According to what default settings are configured in your TV, you may need to modify the program to look a HDMI (normal, cinema, big screen, etc.) to taste. Start with the default setting.

  • How can I get the engine working in the ASA 5505 Crypto

    I bought a brand new ASA 5505 to connect to the Cisco 3640 and I can not yet set up the tunnel. I have tried to change the set of transformation to just but know luck. I recently put a VPN using DMVPN and Cisco 501 in a site-to-site, but it has been wondering what happens.

    The router (3640 executes code 12.4) seems ok and I don't think I have a problem with the router with Cisco 501 great work.

    This is a laboratory environment.

    This is the function defined on the ASA 5505

    The devices allowed for this platform:

    The maximum physical Interfaces: 8

    VLAN: 3, restricted DMZ

    Internal guests: 10

    Failover: disabled

    VPN - A: enabled

    VPN-3DES-AES: enabled

    Peer VPN: 10

    WebVPN peers: 2

    Double ISP: disabled

    Junction ports VLAN: 0

    AnyConnect for Mobile: disabled

    AnyConnect for Linksys phone: disabled

    Assessment of Advanced endpoint: disabled

    This platform includes a basic license.

    This is a ping from 10.3.4.10 to 10.1.1.1. He said nothing about IPSEC or ISAKMP.

    That's what I get when I do the: show crypto ipsec his

    ASA5505 (config) # show crypto ipsec his

    There is no ipsec security associations

    ASA5505 (config) # show crypto isakmp his

    There is no isakmp sas

    Debug crypto isakmp 10

    entry packets within the icmp 10.3.4.10 8 0 10.1.1.1 detail

    I have worked on it for a week and don't really know if I have a bad ASA5505. Since the normal stuff like browsing the Internet works and I can ping to the outside and inside, I don't know what to think. See attachments.

    "Do what you asked has worked.

    Nice to hear that your problem is solved.

    "My question is can I use the transform-set ESP-3DES-SHA instead of MD5?"

    Of course you can.

    Kind regards.

    Please do not forget to note the useful messages and check "Solved my problem", if the post has solved your problem.

  • FTP error access denied permission issue permission to the server folder may not exist

    I've been using mx2004 then passed to cs3 and errors of publication I upgraded to cs4 thinking that might be the problem.

    I have 2 separate sites with 2 separate logins/passwords ftp.

    Only on 1 of the sites (including one with php and a site of big file that my provider has told me) I can't 'put' publish my site.

    My provider says that has nothing to do with their side.

    When I try and download the KB on the web range from 1 KB to 0kb and wipe the info.

    Each week, I use to update one of my sites.

    I added to the server a coral share Photo Album 2 weeks.

    That's when I could not been / publish my info up-to-date on my pages. But only on 1 site. The other with different site

    login/password allows me to change/to update the pages and put / post them.  It is the site of the coraldraw on.

    I took it off the coast of thinking maybe that was the issue...

    my ftp access is correct.

    my tests of connections to the sites is good.

    When turning on the remote server, it gives the following error:

    THE ERROR I GET:

    Start date: 17/07/2009 19:05

    Connected to "the name of my company."

    testzz.HTML - error - FTP is an error - can not put testzz.html. Access denied.

    The file exists may not, or there could be a permission problem.  Make sure that you have the appropriate permissions

    the server and the server is properly confirgured.

    Activity of the incomplete file. 1 file (s) or folder (s) have not been filled.

    Files with errors: 1

    testzz.html

    Completed the: 17/07/2009 19:05

    When I go to the remote site, the name of the file is showing but no content. zero KB

    I'm working on a pc. Windows xp

    I deleted the files, folders and all the ftp commands. I started on and also updated cs4.

    I removed the web album of corel draw.

    I upgraded to IE 8

    My provider has done a test page.html. I could see with 6kb. When I access the page and put some info on this subject and then put/post it goes to a blank page with 0 kb.

    Help, please... Thank you!

    Have you tried to use a distinct and 3rd party FTP client? If you can successfully connect and download to aid what he would suggest process FTP of Dreamweaver is messed up. And unfortunately, this is not surprising as it may seem, it is a part of Dreamweaver, I can meet quite regularly problems with. You can try to play with the site settings by using the Advanced Options tab, which will provide you with some additional settings for the FTP and see if that helps. Otherwise, you will have to just work around it with another FTP client.

  • shortcut for deskjet 8600 pro has disappeared. Re-run the installation program does not help. How can I get that back?

    When I bought and installed my Pro Deskjet 8600 in last July, a wonderful control program has been installed. However, the shortcut on the desktop for this program has disappeared, and I can't. Re-run the installation program does not help. How can I get that back. All I have now is an older version of the HP Solution Center, which does not have the features that I got into the habit of.

    Hello

    Uninstall the software by following programs > HP > HP Officejet Pro 8600 > Uninstall.

    Then download and install the latest version of the software below, it is a more recent software and should solve the problem you are experiencing:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-3&cc=us&DLC=en&LC=en&OS=4131&product=4323659&sw_lang=

    Shlomi

  • lost all the desktop icons may not everything back up

    lost all the desktop icons may not everything back up

    cannot right click on desktop

    lost in the menu administration tools

    The following article might be worth a visit:

    Hide the desktop icons in Windows XP
    http://www.XP-tips.com/hide-desktop-icons.html

  • Documents on the right panel of the Start button may not work?

    Documents on the right panel of the Start button may not work?
    Right click show properties, Blank? Previously ok when click on it goes in the document folder.

    Hello

    1 did you change on your computer?

    2. What happen exactly when you open documents?

    3. are you able to Documents to another location for example the windows Explorer folder?

    Method 1:

    Step 1:

    I suggest you check in safe mode.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Step 2:

    I also suggest you perform the clean boot and check.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Method 2:

    I also suggest you to run the System File Checker.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    I suggest you send the screenshot of the windows properties document...

    Provide this link to screenshot

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

  • Configure the ASa 5505 of remote site by using ASDM

    I would like to be able to administer the ASA 5505 from another site, which is connected via a LAN of Ipsec site-to-site.

    How to activate this feature?

    Hello

    You can remotely administer an ASA using the public IP address (via the Internet), or through the tunnel to the private IP address.

    You can reach the private IP address by activating the command:

    management-access inside

    You can access the ASA by IP address private via CLI or GUI.

    Federico.

  • IE7 "could not open the file: * path *.» The file exists may not

    I created a package of IE7 a while back which works great.  Apart from this little problem.  It generates an error when the user tries to open a .msg to the WebApp.  It will try to open Outlook and display the following error message.  «Could not open the file: * path *.»  The file exists may not, you don't have permission to open it, or it may be open in another program.  Right click on the folder that contains the file, and then click action to check your permissions for the folder. »

    All the other files attached to work.  PDF, html, txt, rtf, etc.  I tried to move temporary Internet files to a different location with the same result.

    Someone at - it ideas?

    Thank you!

    He was captured on Windows Server 2003 x 64 running on W7 x 64

    Also note that when users choose to save him, it opens fine.  This isn't an "acceptable workaround solution.

    Looks a lot like this one: http://blogs.vmware.com/thinapp/2011/01/locally-installed-applications-and-integration-with-virtualized-internet-explorer.html

  • How can I get voice and data to work with the ASA 5505?

    Here's the issue I'm having.   Can I get a Cisco 7940 to work behind one site to another configured ASA 5505 and I can also get data to work behind it.  However, when I try to create a separate Vlan for voice and data, it does not work.  Our voice VLANs on our remote sites are 172.30 and data are 172.31, when I put the inside interface with 172.31 data will work and when I on it 172.30 voice will work.  I upgraded to a security more license and tried vlan3 created as voice.  I have the data to the top and work but I can't get vlan3 to work.   Any help would be greatly appreciated.  Thank you

    Here is my current config:

    hostname TESTvpn
    activate the password xxxxx

    passwd xxxxx

    username admin password xxxxx privilege 15

    name Corp_LAN 10.0.0.0
    name 192.168.64.0 Corp_Voice
    name 172.31.155.0 TESTvpn

    object-group network SunVoyager
    host of the object-Network 64.70.8.160
    host of the object-Network 64.70.8.242

    the Corp_Networks object-group network
    network-object Corp_LAN 255.0.0.0
    object-network Corp_Voice 255.255.255.0

    interface vlan2
    nameif outside
    security-level 0
    IP address dhcp setroute
    No tap

    interface vlan1
    nameif inside
    security-level 100
    IP 172.31.155.1 255.255.255.0
    No tap

    interface vlan3
    nameif Corp_Voice
    security-level 100
    IP 172.30.155.1 255.255.255.0
    No tap

    output
    interface Ethernet0/0
    switchport access vlan 2
    No tap

    interface Ethernet0/7
    switchport access vlan 3
    No tap

    output

    dhcpd allow inside
    dhcpd address 172.31.155.10 - 172.31.155.30 inside
    dhcpd dns 10.10.10.7 10.10.10.44 interface inside
    dhcpd sun.ins area inside interface
    dhcpd allow inside

    enable Corp_Voice dhcpd
    dhcpd address 172.30.155.10 - 172.30.155.30 Corp_Voice
    dhcpd dns 10.10.10.7 10.10.10.44 interface Corp_Voice
    dhcpd interface of sun.ins of the Corp_Voice domain
    enable Corp_Voice dhcpd
    dhcpd option 150 ip 192.168.64.4 192.168.64.3

    Enable logging
    exploitation forest buffer-size 10000
    monitor debug logging
    logging buffered information
    asdm of logging of information

    outside_access_in list extended access allow all unreachable icmp
    outside_access_in list extended access permit icmp any any echo response
    outside_access_in list extended access permit icmp any one time exceed
    access extensive list ip 172.31.155.0 inside_access_in allow 255.255.255.0 any
    inside_access_in list extended access allow icmp 172.31.155.0 255.255.255.0 any
    Access extensive list ip 172.30.155.0 Corp_Voice_access_in allow 255.255.255.0 any
    Corp_Voice_access_in list extended access allow icmp 172.30.155.0 255.255.255.0 any

    VPN access list extended deny ip 172.31.155.0 255.255.255.0 object-group SunVoyager
    extended VPN ip 172.31.155.0 access list allow 255.255.255.0 any

    inside_access_in access to the interface inside group
    Access-group outside_access_in in interface outside
    Access-group Corp_Voice_access_in in the Corp_Voice interface

    Global 1 interface (outside)
    NAT (inside) 0-list of access VPN
    NAT (inside) 1 172.31.155.0 255.255.255.0

    Enable http server
    http 172.31.155.0 255.255.255.0 inside
    http 172.30.155.0 255.255.255.0 Corp_Voice
    http 192.168.64.0 255.255.255.0 Corp_Voice
    http 10.0.0.0 255.0.0.0 inside
    http 65.170.136.64 255.255.255.224 outside
    SSH 10.0.0.0 255.0.0.0 inside
    SSH 172.31.155.0 255.255.255.0 inside
    SSH 65.170.136.64 255.255.255.224 outside
    SSH timeout 20

    management-access inside

    dhcpd outside auto_config

    Crypto ipsec transform-set esp-3des esp-md5-hmac VPN
    crypto map outside_map 1 is the VPN address
    peer set card crypto outside_map 1 66.170.136.65
    card crypto outside_map 1 the value transform-set VPN
    outside_map interface card crypto outside
    crypto isakmp identity address
    crypto ISAKMP allow outside
    crypto ISAKMP policy 1
    preshared authentication
    3des encryption
    md5 hash
    Group 2
    lifetime 28800

    tunnel-group 66.170.136.65 type ipsec-l2l
    IPSec-attributes tunnel-group 66.170.136.65
    pre-shared-key xxxxx

    output
    int eth 0/1
    close
    No tap
    int eth 0/2
    close
    No tap
    int eth 0/3
    close
    No tap
    int eth 0/4
    close
    No tap
    int eth 0/5
    close
    No tap
    int eth 0/6
    close
    No tap
    int eth 0/7
    close
    No tap

    Peter,

    Note that access list names are case-sensitive, so you've actually done something different from what I proposed.

    Please do:

    no nat (Corp_Voice) 0-list of access vpn

    No list of vpn access extended permitted ip TESTvpn 255.255.255.0 everything
    IP 172.30.155.0 255.255.255.0 extended vpn access do not allow any list all

    extended VPN ip 172.30.155.0 access list allow 255.255.255.0 any

    NAT (Corp_Voice) 0-list of access VPN

    In the case where you did deliberately, for example to separate the 2 acl: note that acl VPN (upper case) is also used in the encryption card, where you cannot add a second LCD.

    So if you want to separate you, you will need 3 access lists:

    list of access data-vpn ip TESTvpn 255.255.255.0 allow one

    voice-vpn ip 172.30.155.0 access list allow 255.255.255.0 any

    access-list all - vpn ip TESTvpn 255.255.255.0 allow one

    access-list all - vpn ip 172.30.155.0 allow 255.255.255.0 any

    NAT (inside) 0-list of access vpn data

    NAT (Corp_Voice) - access list 0 voice-vpn

    outside_map 1 match address all vpn crypto card

    Don't know if this was also clearly to my previous message, I recommend you to replace the "all" (in each of the ACL lines) to something more specific (i.e. a remote network, or group of objects that contain the remote networks).

    HTH

    Herbert

  • Recently FireFox often caused 100% CPU usage and locks until it finishes the process (the different). Clear the cookies/cache did not help. Any ideas?

    Windows 2000 SP4, 1 g RAM, Firefox version 9.0.1
    We keep IE6 and Firefox open simultaneously to 2 different email accounts. Firefox has always been much faster even with 3 or 4 tabs open, but for the past few weeks trying to update a screen suddenly CPU goes to 100% usage and of course nothing will move until the process is complete. Close one or more tabs does not help. If I close Firefox completely using the task processor Manager goes back down to zero. After restarting Firefox CPU use may or may not go back to the top as he tries to continue the previous task which has been lock him up.
    He did this with Firefox 3.6, but still it did not happen immediately after the 9.0.1 update either.

    Hi vbolton,

    Have you looked at the Knowledge Base article Firefox using too much memory (RAM) - how to fix the or Firefox using too many resources CPU - how to fix? There is a lot of information in there.

    Hope this helps!

  • Rookie of the ASA 5505 - cannot ping remote site or vice versa

    Hi, I am trying configure an ipsec to an ASA 5505 (8.4) for a Sophos UTM (9.2)

    Internet, etc. is in place and accessible. IPSec tunnel is also but I can't pass the traffic through it.

    I get this message in the logs:

    3 August 5, 2014 22:38:52   81.111.111.156   82.222.222.38   Refuse the Protocol entering 50 CBC outdoor: 81.111.111.156 outside dst: 82.222.222.38

    SITE has (ASA 5505) = 82.222.222.38
    SITE B (UTM 9) = 81.111.111.156

    Pointers would be good because it's the first time I tried this. Thank you.

    Running config below:

    ciscoasa hostname
    activate 8Ry2YjIyt7RRXU24 encrypted password
    volatile xlate deny tcp any4 any4
    volatile xlate deny tcp any4 any6
    volatile xlate deny tcp any6 any4
    volatile xlate deny tcp any6 any6
    volatile xlate deny udp any4 any4 eq field
    volatile xlate deny udp any4 any6 eq field
    volatile xlate deny udp any6 any4 eq field
    volatile xlate deny udp any6 any6 eq field
    2KFQnbNIdI.2KYOU encrypted passwd
    names of
    !
    interface Ethernet0/0
    switchport access vlan 2
    !
    interface Ethernet0/1
    !
    interface Ethernet0/2
    !
    interface Ethernet0/3
    !
    interface Ethernet0/4
    !
    interface Ethernet0/5
    !
    interface Ethernet0/6
    !
    interface Ethernet0/7
    !
    interface Vlan1
    nameif inside
    security-level 100
    IP 192.168.1.1 255.255.255.0
    !
    interface Vlan2
    Description Internet Zen
    nameif outside
    security-level 0
    Customer vpdn group PPPoE Zen
    82.222.222.38 255.255.255.255 IP address pppoe setroute
    !
    boot system Disk0: / asa922 - k8.bin
    passive FTP mode
    DNS lookup field inside
    DNS domain-lookup outside
    DNS server-group DefaultDNS
    Name-Server 8.8.8.8
    network obj_any object
    subnet 0.0.0.0 0.0.0.0
    the object of MY - LAN network
    subnet 192.168.1.0 255.255.255.0
    the object of THIER-LAN network
    192.168.30.0 subnet 255.255.255.0
    network of the NETWORK_OBJ_192.168.1.0_24 object
    subnet 192.168.1.0 255.255.255.0
    network of the NETWORK_OBJ_192.168.30.0_24 object
    192.168.30.0 subnet 255.255.255.0
    network of the THIER_VPN object
    Home 81.111.111.156
    THIER VPN description
    service of the Sophos_Admin object
    Service tcp destination eq 4444
    object-group Protocol DM_INLINE_PROTOCOL_1
    ip protocol object
    icmp protocol object
    object-protocol esp
    object-group Protocol DM_INLINE_PROTOCOL_2
    ip protocol object
    icmp protocol object
    object-protocol esp
    object-group Protocol DM_INLINE_PROTOCOL_3
    ip protocol object
    icmp protocol object
    object-protocol esp
    object-group service DM_INLINE_SERVICE_1
    ICMP service object
    area of service-object udp destination eq
    service-object, object Sophos_Admin
    the purpose of the service tcp destination eq www
    the purpose of the tcp destination eq https service
    ESP service object
    object-group service DM_INLINE_SERVICE_2
    ICMP service object
    service-object, object Sophos_Admin
    ESP service object
    response to echo icmp service object
    object-group service DM_INLINE_SERVICE_3
    the purpose of the ip service
    ESP service object
    response to echo icmp service object
    object-group service DM_INLINE_SERVICE_4
    service-object, object Sophos_Admin
    the purpose of the echo icmp message service
    response to echo icmp service object
    outside_cryptomap list extended access allow object-group DM_INLINE_PROTOCOL_3 MY - LAN LAN THIER object object
    outside_cryptomap_1 list extended access allow object-group DM_INLINE_PROTOCOL_2 MY - LAN LAN THIER object object
    inside_cryptomap list extended access allow THIER-LAN MY - LAN object object DM_INLINE_PROTOCOL_1 object-group
    outside_access_out list extended access allowed object-group DM_INLINE_SERVICE_3 object THIER_VPN host 82.222.222.38
    outside_access_out list extended access allow DM_INLINE_SERVICE_1 of object-group a
    outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_2 object THIER_VPN host 82.222.222.38
    inside_access_out list extended access allow object-group DM_INLINE_SERVICE_4 MY - LAN LAN THIER object object
    pager lines 24
    Enable logging
    asdm of logging of information
    Within 1500 MTU
    Outside 1500 MTU
    no failover
    ICMP unreachable rate-limit 1 burst-size 1
    ASDM image disk0: / asdm - 722.bin
    don't allow no asdm history
    ARP timeout 14400
    no permit-nonconnected arp
    !
    network obj_any object
    NAT dynamic interface (indoor, outdoor)
    Access-group interface inside inside_access_out
    Access-group outside_access_in in interface outside
    Access-group outside_access_out outside interface
    Timeout xlate 03:00
    Pat-xlate timeout 0:00:30
    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    Floating conn timeout 0:00:00
    dynamic-access-policy-registration DfltAccessPolicy
    identity of the user by default-domain LOCAL
    the ssh LOCAL console AAA authentication
    AAA authentication http LOCAL console
    Enable http server
    http 192.168.1.0 255.255.255.0 inside
    No snmp server location
    No snmp Server contact
    Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
    Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
    Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
    Crypto ipsec ikev2 ipsec-proposal OF
    encryption protocol esp
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 proposal ipsec 3DES
    Esp 3des encryption protocol
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 ipsec-proposal AES
    Esp aes encryption protocol
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 ipsec-proposal AES192
    Protocol esp encryption aes-192
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 AES256 ipsec-proposal
    Protocol esp encryption aes-256
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec pmtu aging infinite - the security association
    card crypto outside_map 1 match address outside_cryptomap
    card crypto outside_map 1 set pfs
    peer set card crypto outside_map 1 81.111.111.156
    card crypto outside_map 1 set transform-set ESP-AES-128-SHA ikev1
    outside_map map 1 set ikev2 proposal ipsec crypto AES
    card crypto outside_map 2 match address outside_cryptomap_1
    card crypto outside_map 2 set pfs
    peer set card crypto outside_map 2 81.111.111.156
    card crypto outside_map 2 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
    outside_map card crypto 2 set AES AES192 AES256 3DES ipsec-proposal ikev2
    outside_map interface card crypto outside
    trustpool crypto ca policy
    IKEv2 crypto policy 20
    aes encryption
    integrity sha
    Group 2
    FRP sha
    second life 7800
    Crypto ikev2 allow outside
    Crypto ikev1 allow outside
    IKEv1 crypto policy 90
    preshared authentication
    aes encryption
    sha hash
    Group 2
    life 7800
    Telnet timeout 5
    SSH enable ibou
    SSH stricthostkeycheck
    SSH 192.168.1.0 255.255.255.0 inside
    SSH timeout 30
    SSH version 2
    SSH group dh-Group1-sha1 key exchange
    Console timeout 0
    VPDN group Zen request dialout pppoe
    VPDN group Zen localname [email protected] / * /
    VPDN group Zen ppp authentication chap
    VPDN username [email protected] / * / password * local store

    dhcpd outside auto_config
    !
    dhcpd address 192.168.1.5 - 192.168.1.36 inside
    !
    a basic threat threat detection
    Statistics-list of access threat detection
    no statistical threat detection tcp-interception
    enable dynamic filters updater-customer
    use of data Dynamics-based filters
    smart filters enable external interface
    interface of blacklist of decline in dynamic filters outside
    WebVPN
    AnyConnect essentials
    internal GroupPolicy_81.111.111.156 group strategy
    attributes of Group Policy GroupPolicy_81.111.111.156
    Ikev1 VPN-tunnel-Protocol
    JsE9Hv42G/zRUcG4 admin password user name encrypted privilege 15
    username bob lTKS32e90Yo5l2L password / encrypted
    tunnel-group 81.111.111.156 type ipsec-l2l
    tunnel-group 81.111.111.156 General-attributes
    Group - default policy - GroupPolicy_81.111.111.156
    IPSec-attributes tunnel-group 81.111.111.156
    IKEv1 pre-shared-key *.
    remote control-IKEv2 pre-shared-key authentication *.
    pre-shared-key authentication local IKEv2 *.
    !
    class-map inspection_default
    match default-inspection-traffic
    !
    !
    type of policy-card inspect dns preset_dns_map
    parameters
    maximum message length automatic of customer
    message-length maximum 512
    Policy-map global_policy
    class inspection_default
    inspect the ftp
    inspect h323 h225
    inspect the h323 ras
    inspect the rsh
    inspect the rtsp
    inspect esmtp
    inspect sqlnet
    inspect the skinny
    inspect sunrpc
    inspect xdmcp
    inspect the sip
    inspect the netbios
    inspect the tftp
    Review the ip options
    inspect the icmp
    inspect the dns dynamic-filter-snoop preset_dns_map
    !
    global service-policy global_policy
    context of prompt hostname
    no remote anonymous reporting call
    HPM topN enable
    Cryptochecksum:9430c8a44d330d2b55f981274599a67e
    : end
    ciscoasa #.

    Hello

    Watching your sh crypto ipsec output... I can see packets are getting wrapped... average packets out of the peer 88.222.222.38 network and I do not see the package back from the site of the UTM 81.111.111.156 at the ASA... This means that the UTM Firewall either don't know the package or not able to get the return package... Exchange of routing is there... but you need to check LAN to another counterpart of site...

    Please check the card encryption (it must match on both ends), NAT (exemption should be there @ both ends) and referral to the ends of the LAN...

    I suggest you try with the crypto wthout specific port card... say source LAN to LAN with any port destination...

    allow cryptomap to access extended list ip

    Concerning

    Knockaert

    Concerning

    Knockaert

  • The new features may not be used withFirefox v 14.0.1; but Firefox is updated...

    I tried the steps listed, but they did not help. But I received a message that my computer is insufficient for other versions of Firefox. I hope that the Mac Air is sufficient. Thanks to you all.

    Hello profme, Firefox 16 (16.0.2 to be precise) is the latest version of Firefox that works with your mac 10.5 with owner of Intel. For 10.6 and above, you can use the most recent, see firefox: Firefox 35.0.1 system requirements

    Thank you

  • B210e Inksystem failure, Tower works to solve after cleaning the heads. Does not help

    Currently usinga B210e printer, had a paper jam and removed the jam.  Now I have an error message saying: ink system failure

    Complete guide to troubleshooting by HP, clean same head, back and have always system failure message ink at the same time to activate and deactivate the message that has no effect after hours of frustration.  Have carefully inspected printer and cleaned the printer head prepares and then says turn of and on.  Removed wall taken elctrical and still nothing.  Will you please help if you can because I'm about to throw the printer in an eighteen wheels.

    Thank you

    Bill

    [Personal information]

    Hi Wilcodd,

    I understand that your printer has an alphanumeric error message.  An alphanumeric error message means that your printer has a hardware problem.  If the steps in the document below are not able to resolve your problem, then you need to think to replace your printer.

    Alphanumeric error

    Let me know how it goes.

  • Don't have no access switchport appears on the ASA 5505 ethernet port I am trying set up?

    I've implemented Vlan1 to be named "inside" and there our internal IP address.  Vlan2 is outdoors and has proper external IP address.

    Problem is for some reason that I can't assign Vlan1 to any ethernet port?

    Here's what it looks like:

    interface Ethernet0/0
    switchport access vlan 2
    !
    interface Ethernet0/1
    !

    I even tried Ethernet0/2 and the same thing.  I run the command of ' switchport access vlan 1 "to the interface appropriately, it gives me no errors or funky indication nothing happens and boom, when I look at the config, you can see above it just appears.  No error or anything.

    I'm completely new to this, so rather than continue to repeat this several times (which I did for about 30 minutes) I thought I'd ask.  It is a 'new' 5505 it was a refurb purchased by a client of mine, so I'm setting up from scratch more or less.  Don't understand why I can't assign vlan1.  If all goes well, there is a simple answer to this.

    Hello

    VLAN 1 is the vlan by default. When you set up or leave the configuration on the interfaces by default, these interfaces will be associated to the vlan 1 but not shown in the config on the show see the race.

    Then, your output is OK and normal you have no error.

    Thank you

    PS: Please do not forget to rate and score as correct answer if this answered your question

Maybe you are looking for

  • unsubscribe from TzarMedia

    I just subscribe to TzarMedia only to learn that it is a bad news. How can I get rid of him

  • Deactivation of the system, Hp pavilion g6

    Then my brother set bios password of my computer hp laptop pavilion g6 and password forgotten... I tried to guess, but it says 'disabled system' now I get only white screen when starting my laptop... But I can open "bios setup" I got the code when I

  • Scaling: error-307888

    Hi Forum, I use LabVIEW 2012 and NIVS 2012. Currently, I see my first definition of system. I need to scale, one of the analog inputs of SMU-6363 a factor by using "Add scale > scale polynomial. I always get the error for any function of the scale, I

  • After trying to install sp1 on an Acer Aspire computer an error code came 0xc01a001.

    During the installation of sp1 on an acer aspire desktop is a 2006 or 2007 model and never had viruses, spyware or firewall protection load, the computer stops unexpectedly. There are 3 downloads, it was successfully downloaded and installed the firs

  • where can I find SP40662 @ HP?

    where can I find the page of the web player from HP for this SP40662, someplease post a link to this file through, I'd like to read the info on this file.