SCp call flow between ipphone and CME messages.
I'm looking for some good link on sccp call flow between cisco ip phone and a MAN messages.
I'd appreciate your help if you could direct me to a good link.
Thank you and have a nice day.
Take a look at this: http://flylib.com/books/en/184.108.40.206/1/
Is an excerpt chapter of Cisco IP Communications Express: CallManager Express with Cisco Unity Express: http://www.ciscopress.com/store/cisco-ip-communications-express-callmanager-express-9781587142918
Hoping to help, please don't forget to rate the post if it isn't.
Tags: Cisco Support
I am considering setting up WiFi calling on my iPhone and adding my iPod touch as a secondary device. My question is: is my call synchronized between the two devices as well logs? Basically, I want to know whether continuity will that my incoming and outgoing call logs of conversations made on my iPhone appear on my iPod touch. If so, they will appear in the tab voice of Facetime?
My question is: is my call synchronized between the two devices as well logs? Basically, I want to know whether continuity will that my incoming and outgoing call logs of conversations made on my iPhone appear on my iPod touch. If so, they will appear in the tab voice of Facetime?
Yes, they will show in the Audio tab in FaceTime.
My bb Pearl never had any problems until yesterday when the call log and messages don't "let" on my phone. I have no call log and after a message is read, it is deleted. I looked in the settings, everything seems fine, I has not changed anything that just, it began to arrive.
The memory of your device is low. Remove the battery for 30 sec to 1 min and replace. This will free up space. Also read the discussions in the sticky section on freeing up the memory of the device. If you store photos, etc. on your device, you must move them to the memory card if you have a part for the workspace.
I do not understand how to tell the difference between email and sms messages. It seems that all fall under the Inbox folder, and they are all Message objects. Is this correct? If this isn't the case, please correct me. Is there a method to retrieve all SMS?
Look carefully at the API - there are three distinct objects of the Message:
net.rim.blackberry.api.blackberrymessenger.Message (BB Messenger - 4.2.1 and higher)
All three a really different classes completely different methods and properties.
What is the difference between onMessage and reception, ice AXE, and FLOW.
the FLOW and FLIGHT?
Please refer to this.
You will get the pick activity message.
Choose and receive almost serve same purpose.
But in the choices that we will get OnMessage and OnAlarm branches and it runs branch OnMessage if he receives the message of partnerlink before the expiration of the time for the alarm. Otherwise, it executes OnAlarm branch.
The activities of flow and flow N also serve the same purpose, but flow N, we can define number of streams running
In Mail 9.2 OS 10.11.3 the limit between the list of my mailboxes mailbox and my messages keep slipping backward. Make me feel seasick! Can I disable this feature? I want a stable limit!
In Mail 9.2 OS 10.11.3 the limit between the list of my mailboxes mailbox and my messages keep slipping backward. Make me feel seasick! Can I disable this feature? I want a stable limit! (I really don't care for any of the new movements of the screen in El Capitan slide-wiggly.) I don't know if there is
'fixed' to try! Help, please!
Why do you think it is a "feature" as opposed to something to go wrong with your Mac?
The border between my message list and the display of messages remained constant for several years now.
Nothing moves, nothing is serrated blade.
My mailbox list is always hidden, but when I open it, it remains a fixed width.
I even tried the stupid "full screen" mode and could not see to do random movements, unsolicited.
I have no idea what would cause the behavior you're seeing.
No matter what do you do when it happens? Like maybe click on the voicemail of show/hide button?
To my knowledge.
Call home - configure the SMTP server and do a few other configuration, which can allow be to send emails to the recipients you want for all gravity.
Home - Smart call striving to reach the registry auto TAC for severity level.
Is this correct?
I just read the configuration guide and did not understand the importance of the priority of switching...
You're right about your understanding of the difference between CH and SCH.
What is the difference between Mutipoint and Multiway video calls?
They are both multi-point calls, however, Multiway is a feature that you can activate with the correct infrastructure and MCU in place, which will allow the ends without a telepresence MCU Office and integrated JabberVideo customers of degenerate transparently a point-to-point call in a multipoint call on the relevant MCU.
See the relevant Multiway Deployment Guide corresponding to the version of software that you run on your VCS - C for more information; http://www.Cisco.com/c/en/us/support/unified-communications/Telepresence-video-communication-server-VCs/products-installation-and-configuration-guides-list.html
Please note the answers and score the questions as "answered" as appropriate.
Separated from this thread.
Can not uninstall program called tv.addons.ag, and I get an error-NSIS error message?
(Moved to install, upgrade, and activate)
Thanks for posting your query in Microsoft Community.
The NSIS error message box (Null soft Scriptable Install System) basically means that the executable user or a Setup installer tries to run is damaged or incomplete.
NSIS error can occur for the following reasons:
(1) software files downloaded from the Internet are not complete.
(2) downloaded the software, the files have been changed since the original version.
(3) your PC is infected with a virus.
(4) physical media used to install the program is damaged.
(5) materials required (for example, CD/DVD player) is defective.
I suggest the following tasks and check to see if it helps:
Note: Try to install your software, after the execution of each task.
(1) clear the cache and cookies in your Web browser.
I suggest you follow the link on how to remove the cache of Internet Explorer below.
(2) if the name of the downloaded installer files composed of several words, rename it to have only one word. (Example: SoftwareNameInstaller.exe)
(3) if it is available, download the file for installing software from another source approved.
4) update your antivirus/security software.
(5) disable your antivirus and any tool on your computer download accelerator, before to perform the download.
(6) I suggest you try to download and run the Microsoft Security Scanner that allows to remove viruses, spyware and other malicious software. Check out the link below to download Microsoft safety scanner http://www.microsoft.com/security/scanner/en-us/default.aspx
I hope that the information above to fix the problem. Please let us know if you need additional assistance. We are happy to help you.
Hi, I am creating the database link from a database of Oracle 11 g PostgreSQL with DG4ODBC and unixODBC
My configured for /etc/odbc.ini
Description = Test to Postgres
Driver = psqlodbc
Trace = Yes
Trace file = /tmp/sql.log
Database = danieldb
UserName = SA
Password = password
Port = 5432
Protocol = 6.4
ReadOnly = No
RowVersioning = No
ShowSystemTables = No
ShowOidColumn = No
FakeOidIndex = No
My configured for /etc/odbcinst.ini
CommLog = 1
Debug = 1
FileUsage = 1
Layout common = No
Trace = 1
Description = PostgreSQL ODBC driver
CommLog = 1
Debug = 0
FileUsage = 1
My configured for /u01/app/oracle/product/11.2.0/xe/hs/admin/initPostgreSQL.ora
HS_FDS_CONNECT_INFO = PostgreSQL
HS_FDS_TRACE_LEVEL = 0
HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbcpsql.so
My configured for /u01/app/oracle/product/11.2.0/xe/network/admin/listener.ora
(ADDRESS = (PROTOCOL = TCP) (HOST = oracle-poc)(PORT = 1521))
(SID_NAME = PostgreSQL)
(PROGRAM = dg4odbc)
My configured for /u01/app/oracle/product/11.2.0/xe/network/admin/tnsname.ora
(ADDRESS = (PROTOCOL = TCP) (HOST = oracle-poc)(PORT = 1521))
(SID = PostgreSQL)
(HS = OK)
I'm trying to created public database link:
CREATE DATABASE LINK PUBLIC 'orapos' CONNECT to 'HIS' IDENTIFIED BY 'password' USING 'PostgreSQL ';
When I used tnsping
[[email protected] admin] # tnsping PostgreSQL
AMT Ping utility for Linux: Version 220.127.116.11.0 - Production on May 16, 2013 20:34:19
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Use settings files:
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = oracle-poc)(PORT = 1521)) (CONNECT_DATA = (SID = PostgreSQL)) (HS = OK))
OK (0 msec)
and finally, I try to use the database link:
"SQL > select * from tabel2"@orapos ".
Select * from 'tabel2"@orapos '.
ERROR on line 1:
ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:
ORA-02063: preceding the line of ORAPOS
What wrong with my setup?
Thank you and best regards,
The problem is that you are using the ODBC Postgres driver for the HS_FDS_SHAREABLE_NAME parameter, but this must be an ODBC driver manager and not the driver ODBC Psotgres.
Go to the.
Click the 'Download' and follow the instructions to download the 2.3.1 pilot and make libraries and programs.
Once this is done, then use the driver as parameter HS_FDS_SHAREABLE_NAME Manager, for example-
Depending on where you install it.
Unity 4.0.2 unified exchange 2000 tsp 7.02 call Manager 3.3 single does site no cluster
Hi, I have incorporated the above but got 1 problem of stuborn. the mwi on and off voltage indication are delayed by between 5 and 40 minutes, this problem is related to all users. the problem is internal and external calls. I had this problem of troubleshooting for several days. tests indicate that the message does not appear in the unityMTA but takes about 1 minute to appear in the outlook-box users, when I do a refresh on the light lamps work properly. There is no error on the area of the unit or the gc/dc boxes or e2k clients, but several positions designed, it may be DNS. I tried to add files hosts with no joy. basically is there any way that I can retry the record to know what is happening, or is it possible to force a lamp after so many seconds as a work-around. Thank you. Jim.
I wonder if the Exchange is slow to tell us...
In the directory \CommServer\TechTools there is a tool called MBXSuite.exe. Once you open MBXSuite.exe select the mailbox you want to monitor. Choose the account that runs the AvMsgStoreMonitorSvr as for RunAs. Click Notifications, and then click mailbox to logon.
Once it's done leave a new message to the Subscriber. How long does it take to see you
A slide with several text entry areas (TEBs) and a Submit button, which performs a function to validate the TEBs (thank you David for have started me).
I don't really know the difference between them.
It's like the window is your browser window and the document is the HTML page inside.
Also, you can use each of them to access specific properties - and window has a context.
- window.cpAPIInterface.setVariableValue ("q1_fback", ""); -erase a message of feedback (text of legend with variable) associated with BER
- document.getElementById("Text_Entry_Box1_inputField").style.border = 'solid red medium. " -modification of the border of an object invalid BER (red)
My question is:
1. What is the difference between ' window ' and "document." in a context of Captivate?
I will post you more questions to find out how:
1 use loops to knock down my code
2 reuse the same function in other slides
Your assumptions are correct.
the cpAPIInterface is in the window.
The Text_Entry_Box1_inputField is in the document, not the window, but you can use:
window.document.getElementById("Text_Entry_Box1_inputField").style.border = 'solid red medium. "
Scope of variables depends on how and when they are declared, and it is generally best to limit their scope and not use them globally in the window object. All seem to be available in the cPs variables window.
I'm working on a project for a Government of a county of Florida. We have a problem with project accounting R12 data match with OBIEE 11g database. It is more of a field of marking problem than a problem of integrity of data - for example, 'Customer number' in the accounting of the project is clearly a different data set than 'Customer number' in BI. We know the same data exists in BI but we do not know what it is called and therefore how interrogate him for reporting purposes. Why data marking is so messed up, I can't say, but I was in charge of mapping 'Customer number' (and everything else) in project accounting to the equivalent of the BI field. Supposedly this mapping does not already exist (which seems impossible since someone set up the flow of data between the two parts of the system at some point!). I hope someone can recommend an approach that doesn't end up being heavy and manual. Thank you!
Warm greetings to all,
Oracle Business Intelligence Applications ETL Data Lineage Guide version 18.104.22.168 and 22.214.171.124 [ID 1274680.1]
Check this box... It gives you a document of data lineage... Mapping between source and target stage and...
It certainly helps you the way that you look.
MAK is useful if it helps...
(1) what is the best way to send messages between these two App servers? (I mean use the JMS bridge or regularly use JNDI lookup and send the message and so on)? We want to send messages in both directions between these two App servers.
(2) how we use JNDI search inside glassfish for OSB. We use an approach by providing the full client jar fat weblogic. (53 MB) Is this the only way? Is there any thin weblogic client that we use for queue search OSB of glassfish?
Thanks in advance.
Using a JMS client WL on GF has limits on XA/JTA, consuming messages from distributed locations and securing individual destinations. Workaround for the latter is to avoid to set ACLs on WL destinations and use SSL to encrypt network traffic if you wish.
I recommend the following general method: (1) avoid using WL JMS on the GF level clients if you need exactly once the e-mail or require the consumption of a distributed destination and (2) use OSB or WebLogic foreign seller JMS integration facilities for either (A) bridge/transfer messages between WL JMS and GF JMS or call (B) GF JMS directly the WL/OSB tier.
If you don't want to use a jar full of WebLogic as a customer, there is a pot of customer 'thin' t3 equivalent available in the latest version. I recommend the full jar unless a small pot size is an important condition in your use case. I recommend the thin 't3' jar on the thin "wl" pot as the pot thin t3 tends to have much better performance. Or the other of these clients can interact with older versions.
FAQ for vendors integrating a Remote JMS summarizes the Server WebLogic tools available for the integration of foreign suppliers (http://download.oracle.com/docs/cd/E14571_01/web.1111/e13727/interop.htm#JMSPG553). I'm not familiar with a tool equivalent/layers of OSB.
The stand-alone Clients documentation lists different JMS (http://download.oracle.com/docs/cd/E14571_01/web.1111/e13717/basics.htm#SACLT122) client options.
The message flow is as follows:
1 call comes in the trunk (no VoIP, so VoIP trunk goto step 3)
2. call gateway Hits
3 gateway send invite to the redirect server
4 forwarding server load balances calls and returns a message moved (302)
5 SIP call arrives on the call as a new call center
6 call Center informs the new call CTI Server
7 CTI server transferred call new message to the Instant Messaging server
8. the appellant interacts with IVR/campaign
9 IVR sends appeal to Workgroup/queue
10. call integrated ACD queue
11 call Center sends the message to the Instant Messaging server to be considered as an appeal of the CDA
12 call Center queue time of ACD Server queries
13. the customer listening to hold music, promotional messages, etc., while waiting to be connected with an agent
14 ACD Server informed Call Center as an Agent is available
15 ACD call from queue
16 call Center sends to the Agent via CTI Server
17 agent accepts the new interaction, the call is filled
18 call Center cancels ring timeout
Maybe you are looking for
HelloI want to turn my office 90degrese or more. I have the ATI radeon X 600 SE card. ati technical support said, that there is a "Tower/BP" registercard by: Start/Akbulak/system/Anzeige/Einstellung/judgements / (ITA) BP (Tower). But there is no. I f
have a hp reset flow request password admin or power on password, never put a. Try three times and give the code 59577103 any help is greatly appreciated! Thank you!!
I went through the context help for peak detector. I force understand the importance of the location indicator. Can someone give detailed information on how to find places of any input signal. ?
Hello Recently, left my y510 hinge broken which, in turn, tore the cross-over cable. When this happened, the computer laptop flashed on and off a few times and then was cut. I had the cross-over cable soldered to a repair shop for around $50 (!), but
I inadvertently "REMOVED" the recognition of 'network' of 5 ghz on a menu that allowed me to "remove unnecessary networks." I thought I was doing the right thing, but deleted by mistake the 5 ghz. Now I just can't side 5 ghz of the card to show as a