screen and the custom of chdisk climb at the beginning remains empty

Hi, I chose chdisc execution by clicking right properties c/player ect but when I restarted the laptop, it is towards the top of the dell screen and then it stays just black. I turned it off and on a few times, but it helped has'ent.  I tried to run this because before this happened it took forever to start with just a black screen for a few minutes.  Any help would be appreciated because she's not even mine, I was just trying to help someone, but in Vista, thanks.

Hello

See if these tutorials help you with this problem.

"How to run the check disk at startup in Vista or Windows 7"

http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

"How to difficulty Chkdsk will not run at startup in Vista"

http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.html

See you soon.

Tags: Windows

Similar Questions

  • Presenter PowerPoint on Mac mini mode displayed on the screen and the projector when using HDMI splitter

    We have a Mac mini connected to a screen and a projector via HDMI using a HDMI splitter.

    It works fine for most applications, but during presentations PowerPoint, presenter is displayed on the monitor and the projector.

    When I disconnected the mini Mac's HDMI cable and put it in a MacBook, the presenter appeared on the MacBook screen (as it should) and only the slide appears on the screen and on the projection screen.

    Of course if we have to use the MacBook for presentations instead of the Mac mini, you would need to have seen the presenter on both the screen and on the screen of the MacBook.

    In the Mac mini display preferences there is no button to "Gather Windows" when the Mac mini is attached to the screen and the projector via HDMI splitter is a tab "setting."

    But these two things appear on the MacBook when it is connected.

    Any help would be greatly appreciated.

    Thank you!

    Mike

    I'm confused. When you use a video separator the same screen will appear on the two monitors connected to the separator. This is how works a separator

  • IPhone 6 continues to go to the turning off of the screen and the screen where I enter my access code.

    IPhone 6 continues to go to the turning off of the screen and the screen where I enter my access code to return. I hit Cancel on the stop screen or type my password the password screen and it goes back to the screen, I was on. I did a reset, all settings, but not him erase all content and settings. I went all day without any problems and an ago he started to panic. I took the cover of a few days ago thinking it might be the cause of the problem by pressing the power button, that wasn't the problem. Can someone give me some advice on what could be the problem?

    I have not updated my phone to the new IOS

  • After logging on my Satellite Pro only black screen and the cursor are visible

    I have a windows vista pro (PSAASE-00G004GR) satellite after turn on and typing the password for windows vista, the screen goes black but I see that the cursor moves & because it seems that the hard drive also works in th background, but I can't see anything except the mouse cursor , I tried to boor with other options (LAST WORK safe MODE KNOWN FEATURES... etc) but it's still the same only black screen and the cursor...

    I do not prefer the product cause of my data recovery on this subject, any ideas?
    thnx

    Hello

    You have the Satellite Pro A100 PSAAS hmm if you want to save your personal data, I recommend to remove the portable computer HARD drive and try connecting it to another computer via an external USB HDD controller. These cases of 2.5 HARD disk are not expensive and you can buy it in every store of the computer.

    Then you could try to recover the laptop delivered together with the Toshiba Recovery CD.
    But wait; have you tried to connect the laptop to the external display?
    Check it!
    Maybe you could see something on the second screen.

    I think that this procedure could be useful to clarify what s wrong.
    To me this question looks like a small little dysfunction of the FL inverter.
    In this case the installation of the new operating system will help you not to solve this problem.

    But who knows the verification is necessary to find what could be wrong.

    Good luck and bye ;)

  • iPhone 6 alternating between the black screen and the Apple logo and nothing else

    my iPhone 6 alternates between a black screen and the Apple logo, what do I do?

    Hi Nathanielfromwa,

    If your iPhone 6 alternates between black screens and the Apple logo, this could be a problem that can be fixed by wiping your iPhone to factory settings. If this is the case, save your iPhone first. I've included links if you need help with backing up your iPhone, but also to reset to the factory settings.

    How to back up your device using iCloud or iTunes - Apple Support

    Erase content and settings on your iPhone, iPad, iPod touch or Apple Watch - Apple Support

    I hope this helps, and if you have more questions, do not hesitate to ask!

  • colored lines appear on the screen and the computer freezes with W7

    This happened several times since I got this computer in December.  Lines of color will appear in horizonally across the screen and the computer freezes.  After I have turn it off and start it again, there is no problem.  But is it a problem waiting for one big from appearing in the future?

    If this is a new computer, take it back where you got it because it will still be under warranty.
    Could be something from the graphic card, monitor etc. TaurArian [MVP] 2005-2010 - Update Services

  • When I was playing the game and my 3D PC show the black screen and the sound of noise.

    Hi Admin,
    When I was playing the game and my 3D PC show the black screen and the sound of noise. And then I can't move anything and I can restart only. What is this problem? I don't know why? Please help me what should I do.
    My PC specs are as follows

    Aspire M5800 (Q84MR375) Genuine Windows Vista® Home Premium, 64-bit, Intel Core 2 Quad processor Q8400 (2.66 GHz, 4 MB L2 Cache, bus front at 1333 MHz), 3 GB Ram, 750 GB S - ATA HDD, DVD SuperMulti Double Layer drive, Nvidia GeForce GT220 graphics (1 GB dedicated RAM) card, Wireless LAN, keyboard and wireless mouse with LCD 23 '' monitor.

    phoechan,
    More than likely if this started after you upgrade to Windows7 then you might have to update your hardware drivers.  Go to the websites of the manufacturers of hardware for your PC and get all the latest drivers for Windows 7 (video, sound, chipset, etc...).  If they don't have Windows 7 drivers you may have questions until they create them.  You can also try to boot your PC and also right click on the game .exe file and change the compatibility mode to Vista or XP.

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

    I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

    Hi KevinRy,

    Welcome to the Microsoft Answers site!

    Unplug all external devices.

    Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

    Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

    1.

    Right-click my computerand then click Properties.

    2.

    Click the Advanced tab.

    3.

    Under Startup and recovery, click settings to open the Startup and recovery dialog box.

    4.

    Clear the automatically restart check box, and then click OK many times necessary.

    5.

    Restart your computer so that the settings take effect.

    Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

    Please reply back with the error message you get because it helps us to resolve the error.

    Kind regards
    Amal-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • When I change how a user connects power on and off a screen appears saying "client for Netware has disabled the Welcome screen and the fast user switching. To restore these features...

    Original title: how to uninstall client services for netware?

    When I change how a user connects power on and off a screen appears saying "client for Netware has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall client services for Netware... But it is impossible to find... Help?

    Hello LindsayJune,

    Click the Start button.
    Click on Control Panel. Select network connections
    Right click on 'Connect to the Local network', then click 'properties '.
    Search for "Client Service for NetWare" slot "this connection uses the following items."
    Click it, and then click the "Uninstall" button
    Restart your computer.

    Uninstall client for Netware feature will allow the option of quick change of user on your computer.

    I hope this helps.

  • In XP, cannot change the way users log on and outside, getting the error "a recently installed program has disabled the Welcome screen and the user fast switching.

    The switch on my fast computer of user function has been disabled on my computer. When I try to use this function. I get the following message.

    A recently installed program has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall the program

    . The following file can help you identify the program that made the change. GT Gina.dll

    * original title - I have a windows xp. Under user accounts, choose a task. Under change the way users log on and outside.  I get a message that the function of the Welcome screen has been blocked *.

    Hello

    You can try the steps outlined in the article below and check out them.

    The logon screen "Welcome to Windows" does not appear when you start the computer
    http://support.Microsoft.com/kb/817142

  • I can't access my home screen and the fast user switching!

    I get an error message when I try to change the way I connect
    "client services for NetWare has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall the Client Services for NetWare. "
    What is NetWare? Where is he? I don't find it on my program list to remove it! Help!

    To resolve this issue, follow these steps. NOTE: If you rely on access to a Novell network and need the Client Service for Netware or the Novell Client, you cannot use the home screen or fast Windows XP user switching features.

    1. If you are using the Novell Client, see the following Web site for instructions on how to uninstall Novell support:

      http://support.Novell.com (http://support.novell.com/)
    2. If you are using the classic view in Control Panel, double-click network connections. If you are using the category view, click on network connections and Internetand then click on network connections.
    3. Right-click each connection that you have, and then click Properties each time.
    4. Under the tab general in each Local network connection, select the Client Service for Netware, and then click Uninstall.
    5. In the Dial-up connection properties dialog box, click the Networking tab, highlight the Client Service for Netwareand then click Uninstall.
    6. Restart the computer.
    7. Open Control Panel, and then double-click user accounts.
    8. Under pick a task..., click on change the way users log on or off the power.
    9. Click to select the opening and closing of session options you want: use of the Welcome screen or use quick user change.
  • Moved from start menu to the top right of the screen and the quick launch at bottom right bar

    Menu start accidentally moved to the top right of the screen and the taskbar for quick launch at the bottom right of the screen.  Can someone tell me how to solve this problem?

    I assume you mean that the to-do bar everything is on the right side instead of the lower part of the screen?

    Right-click on an empty spot in the taskbar and unlock it. Grad white spot a drag it down. Relock the taskbar.

  • Get the blue screen and the computer shuts down.

    Suddenly, I got blue screen and the computer will stop. File that describe the problem

    c:\Windows\Minidump\Mini020611-01.dmp

    Anyone know the cause of the problem? Any security breach?

    Hello

    Security is not usually a problem with a BSOD but it can be. Are you running effective
    antivirus/antispyware/security programs?

    ------------------------------------------------

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    (also Windows 7)
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    ===========================================================

    Check out these utilities to see if information may be collected:

    It is an excellent tool for displaying the blue screen error information

    -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
    and displays information about all accidents of a table.
    http://www.NirSoft.NET/utils/blue_screen_view.html

    -------------

    MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
    time of the BSOD to provide more information about the possible cause - see TIP.

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
    Set it for a bit before and after the time of the BSOD.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    ------------

    AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
    application goes down has occurred in your system. The information breaks down is extracted from the .wer
    the files created by the Windows Error Reporting (WER) of the operating system component of each
    time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
    text/html/csv/xml file.
    http://www.NirSoft.NET/utils/app_crash_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Change the resolution of the screen and the screen went black

    Then I tried to change the resolution of the screen and the screen went black.  I tried to restart, plug in my HDMI port on my TV... Nothing.  So I went with a system refresh (yes I'm sure it was a refresh and not a restore).

    The fact that there is no integrated procedure to detect the moment where that happens and return to the old resolution is annoying enough...  But now after that choose the system update and it would be only to reset the settings to default back and keep all the files (as he said it would be), I am extremely frustrated to know that it has deleted ALL my programs.  Program E-v-e-r-y.  This means that Chrome, Firefox, jGrasp, AutoCAD, all my programs Microsoft Office, all my Adobe stuff, my Visual Studio and so much more that I'm not naming.

    I REALLY hope there is a place where they were stored so I don't have to reinstall everything manually.  If not, then wow, Microsoft... We finished.

    Unfortunately a refresh as he said, only maintains personal records (program data), the data can be located in the "in the"Windows"folder windows.old folder normally C /: Drive, all modern apps should be kept."

    All programs of office/legacy (Chrome, Firefox, jGrasp, etc.) need to be relocated from their original sources

    Keep all of your programs, personal files (data), settings, the best option is to create a "Disk Image" - see link below for info.

    http://Windows.Microsoft.com/en-AU/Windows7/choosing-an-advanced-recovery-method

  • I have Ps CS6 running on a MAC Pro partitioned and using Windows 8.1. It was mainly for the resolution of the screen. However, as the Ps work the tiles on my screen and the icons at the top and to the bottom of the face are so small I don't see the correc

    I have Ps CS6 running on a MAC Pro partitioned and using Windows 8.1. It was mainly for the resolution of the screen.

    However, as the Ps work the tiles on my screen and the icons at the top and to the bottom of the face are so small I don't see the correctly.

    Can I enlarge these and the layers on the right to a box size readable?

    My UI elements appear tiny. | Error postal codes of Mylenium

    Mylenium

Maybe you are looking for