Screen black upgarde W530 32 GB of RAM

Put the upgrade of 32 GB memory (4 x 8 GB CORSAIR Vengeance DDR3 1600, C10) so far I ran across black screen several times. It happened in the start or back to the top of the mode standby. To push the power button, W530 restarts but did not show the error message in the start menu upward. I checked the version of BIOS is 2.58. And the analysis of material execution - all pass I used ca, 20v 170W. Any suggestion to help debug?


Tags: ThinkPad Notebooks

Similar Questions

  • After the last update on Wnidows 7 Firefox opens just a blank screen (black).

    After the last update Firefox on a machine Wnidows 7, Firefox opens just a blank screen (black). It worked fine until the latest update. It does not open in "safe" mode I tried several facilities clean and using various other compatibility settings. I also tried various changes of display. Closing X is still under the black forest as I can by conjecture activate this.

    Get a black screen after updating to Firefox 33 can be caused by a problem with hardware acceleration in Firefox.

    You can check if there is an update for your graphics display driver.

    Try to start Firefox in Safe Mode by holding down the shift/Options key.

    Disable hardware acceleration in Firefox.

    • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

    You will need to close and restart Firefox after enabling/disabling this setting.

  • 10.11.5 el capitan / no login screen / black

    After installation, I can not connect to OS X because (speculation: the LoginWindow service does not start).

    • Screen black (but always on)
    • No "cursor in the corner.
    • Occasional spinner
    • Finally, turned more
    • Cannot start in safe mode
    • Reset the SMC
    • Reset the PRAM

    I can connect via ssh. From there, I can see via system.log that LoginWindow is continually start and stop and it seems to be an auth problem.

    16 May 11:59:54 doom SecurityAgent [1170]: AgentMechanism called [mechanism(builtin:policy-banner)]

    16 May 11:59:54 doom SecurityAgent [1170]: AgentMechanism [mechanism(builtin:policy-banner)] called setResult: 0

    16 May 11:59:54 doom SecurityAgent [1170]: {processRequestCreate} could not create the agent mechanism, failure of authentication.

    16 May 11:59:54 doom authd [137]: engine [1155]: error creating agent mechanism

    16 May 11:59:54 doom authd [137]: engine [1155]: assess 60008 returned back errAuthorizationInternal

    16 May 11:59:54 doom authd [137]: copy_rights: _server_authorize failed

    16 May 11:59:54 doom SecurityAgent [1170]: AgentMechanism [mechanism(builtin:policy-banner)] destroy called

    16 May 11:59:54 doom loginwindow [1155]: login window - return of the security officer

    16 May 11:59:54 doom ManagedClient [1169]: CFPasteboardRef CFPasteboardCreate (CFAllocatorRef, CFStringRef): failed to create aggregate data

    16 May 11:59:54 - last message repeated 3 times.

    16 May 11:59:54 doom loginwindow [1155]: ERROR | -[LoginApp continueAuthPluginRequestAfterFamilyControlsCheck] | AuthorizationRef is not a username. On the way out.

    16 May 11:59:54 doom loginwindow [1155]: exit via direct Application Login window: 0

    And the authd.log:

    16 May 10:48:07 doom authd [111]: managed allowing the right 'system.install.apple - config-data' customer '/System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/Resources/in stalld' [329] permission created by ' / System/Library/CoreServices/Software Update.app/Contents/Resources/SoftwareUpdateConfigData' [336] (4.0)

    16 May 10:48:07 doom authd [111]: Sandbox denied authorizing the right ' system.install.app - store - software.standard - user ' permission created by ' / System/Library/CoreServices/Software Update.app/Contents/Resources/SoftwareUpdateConfigData' [336]

    16 May 10:48:07 doom authd [111]: managed allowing the right 'system.install.apple - config-data' customer '/System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/Resources/sy stem_installd' [337] permission created by ' / System/Library/CoreServices/Software Update.app/Contents/Resources/SoftwareUpdateConfigData' [336] (4.0)

    16 May 10:48:07 doom authd [111]: Sandbox denied authorizing the right ' system.install.app - store - software.standard - user ' permission created by ' / System/Library/CoreServices/Software Update.app/Contents/Resources/SoftwareUpdateConfigData' [336]

    16 May 10:48:08 doom authd [111]: engine [333]: error creating agent mechanism

    16 May 10:48:08 doom authd [111]: engine [333]: assess 60008 returned back errAuthorizationInternal

    16 May 10:48:08 doom authd [111]: copy_rights: _server_authorize failed

    16 May 10:48:18 doom authd [111]: engine [351]: error creating agent mechanism

    16 May 10:48:18 doom authd [111]: engine [351]: assess 60008 returned back errAuthorizationInternal

    16 May 10:48:18 doom authd [111]: copy_rights: _server_authorize failed

    16 May 10:48:28 doom authd [111]: engine [373]: error creating agent mechanism

    16 May 10:48:28 doom authd [111]: engine [373]: assess 60008 returned back errAuthorizationInternal

    16 May 10:48:28 doom authd [111]: copy_rights: _server_authorize failed

    The last three statements are repeated each attempt to start to the top of the login window.

    A glance at:

    http://www.NetworkWorld.com/article/3012241/Macs/a-fix-for-the-OS-x-black-screen - of - doom.html

    suggests I should turn to 'use iCloud password' (which can be enabled), but I don't see how to do it from the CLI.

    If you do not already have a current backup, please backup all data, and then reinstall the OS. * you don't need to erase the boot volume, and you won't need the backup unless something is wrong. If the system has been upgraded an earlier version of Mac OS X, you may need to the Apple ID and password to use.

    There are ways to back up a computer that is not fully functional. Ask if you need advice.

    If you installed the runtime Java distributed by Apple, and still need, you will need to reinstall it. It goes the same for Xcode. All other data will be preserved.

    Related support article refers to OS X 10.11 ("El Capitan"), but the procedure is the same for OS X 10.7 ("Lion") and later versions.

  • iPad Pro 128 GB IOS 9.2 screen black

    All videos, youtube, bought videos, etc. are screen black but audio is OK. Is this a bug problem? I don't have not do a difficult start (button ups / home together for 10secs) but made a regular stop of reboot. Any ideas out there?

    Try the forced reboot. Press the sleep and home for 20-30 seconds. If you see a silver apple, let go and let it restart.

    If a restart will not bring him back, do what you can to save things and make an appointment at your local apple store to check out them.

  • T60 x 1400 victory 8.1 x 64-screen black after start-up

    Hello

    my config - T60 with ati x 1400, I use win 8 x 64 and it works fine for me.

    But I would jump up to 8.1.

    I was working on win 8.1 x 64 before, but I decided to downgrade due to a very annoying problem.

    After the closing start system again that the screen was completely black (no cursor even), but I can hear that the system is running in the background. He helped bring my laptop for the sleep/hibernate and wake up again. Black screen does not appear if I use sleep/hibernate implementation, but only if turn off pc by shutdown system.

    I have install the ati drivers for vista support page lenovo T60, avoiding "setup.exe" and ccc, only pure graphics driver, installed through properties of the graphics card.

    Earn 8 x 64 this method works very well, the 8.1 looks the same, but then this problem with black screen appeared.

    Maybe I have to stay forever on win 8...

    I wonder if anyone has had problems familiar and may have found way to solve?

    Thanks for any help.

    I work on win 8.1 now.

    After the upgrade, the screen black problem appeard again, but this time with the visible mouse pointer.

    I had to disable the "quick start" option in the power manager.

    I think I read on this solution that somewhere, but long ago had no faith in it.

    Anyway, the problem was gone, and I am a user happy windows 8.1. For a long time, I hope.

    Thanks for the help AtliJarl.

    Best regards from the Poland.

  • My lenovo ZTE A1000-G screen black but on

    My lenovo ZTE A1000-G screen black but on I can not do anything by pressing the power button / stop + flight, until the touch pwr, touch pwr + low-flying and flying up and down but nothing happened please help what I do to solve this problem, it happened when I was playing a game in the middle of a game in progress lag and when I press the power button the screen turn black, but always on it please help...

    This is my new tablets...

    (Sorry for my bad engglish)

    Hi Grenven,
    Do what I say to reset (restart) your Tablet: -.
    --> Memory location opened by card (SD card).
    -> Take something thin and sharp as a safety pin or a toothpick.
    -> Now, you will see a small hole like structure near SD card slot. (In fact it looks clearly if there is something on the inside, but there are.)
    -> Spend your pointy thing in this hole up to a certain distance. (Pass slowly inside until you hear a clicking sound)
    -> Who has the reset button which will restart your tablet of any situation.
    -> Do not lose patience while finding the reset button. Do what I say and your tab will be back normal. Find it for the first time is a little more difficult but follow my steps, and you will get it.

    Good luck...!!

  • EXPLORER WINDOWS STOPPED WORKING [NOW WHEN MY COMPUTER LOADED UP, ALL I SEE IS A SCREEN BLACK, NO ICON, NO MENU START, NOTHING] _

    I RECEIVED A MESSAGE "WINDOWS EXPLORER HAS STOPPED WORKING" [NOW WHEN MY COMPUTER LOAD UPWARD, ALL WHAT I SEE IS A SCREEN BLACK, NO ICON, NO MENU START, NO WALLPAPER, NOTHING].

    AFTER A REBOOT, I GOT A MESSAGE "PROJECT WINDOW HAS STOPPED WORKING. A PROBLEM CAUSED THE PROGRAM TO STOP WORKING CORRECTLY. THE WINDOW CLOSE THE PROGRAM AND NOTIFY YOU IF A SOLUTION IS AVAILABLE. "AFTER HAVING CLICKED ON THE MESSAGE HE OPENED THE WINDOW UPDATE,.

    I TRY THE WINDOW UPDATE, I THINK THAT THE UPDATE FOR WINDOWS VISTA SERVICE PACK 2, BUT HE HAS JUST SAY PREPARES TO INSTALL THE UPDATE AND RUNNING IT FOR HOURS, BUT NEVER INSTALL THE UPDATE.

    IT OF THE ONLY SOLUTION WINDOW SHOWEVED FOR ME, IS THERE ANY OTHER SOLUTION TO MY PROBLEM?

    Thank you

    OH I JUST ACCESSED INTERNET EXPLORER, CONTROL PANEL, MY COMPUTER WITH DELL DOCK FOLDER. DELL DOCK IS THE ONLY PROGRAM RUNNING. MY OFFICE IS STILL IS NOT RUNNING. MENU START, THE ICONS, THE WALL PAPER STILL DOES NOT WORK. I STILL HAVE BLACK SCREEN.
    I TRIED THE SYSTEM RESTORE, BUT IT FAILED. I HAVVE MY BLACK SCREEN PROBLEM.

    Andy1502_a,
    If you haven't tried the "last known good configuration" among the Advanced startup options then do that first.  If this does not help, you must run the System File Checker to search for possible system problems.  Then, you must run the upgrade from the system tool and then see if you are able to run the SP2 update.   Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Diskette drive 0 seek failure screen black/continue F1, F2 Setup, CORRECTION steps

    Have followed the instructions for the BIOS, floppy drive disabled

    Has not solved the question-are there - it something else?

    That's what I discovered, trying to follow the instructions of several positions of countless times and several Tech IT these past two weeks.  This FIX is actually three steps; Two steps in blue SCREEN, the second of two parts missing in the instructions in the previous post Forum fixes:

    STEP 1. Select "F2" on your SCREEN black Error Message 'diskette drive 0 seek failure;

         Missing the 2nd step indicating where 'Floppy' must be DISABLED... is actually in two places.

    STEP 2.  Arrow down and SELCET «CMOS...» "near the top of the list - (the keyboard is not active) and on the next screen, arrow down and SELECT -" Floppy Drive-1, 44 is activated "MUST be EXCHANGE FOR: 'DISABLED' (the readers of floppy-1, 44 are obsolete) another menu screen will pop up, to make your selection, the arrow down to select"OFF"and the ECONOMY-F10.

    STEP 3  Submenu will return to the MAIN - BLUE SCREEN Menu, you need to arrow down and select BIOS; as stated in previous POSTS and need RESET BIOS to: #1 HD, CD/DVD #2; #3 unable to READ floppies; then select F10 to run, return to the main Menu of previous blue screen; "F10,"saves and exits" you in the main Menu of Blue SCREEN" toCOMPLETE FIX... Windows Start Up, immediately, translates the computer starts normally and returns to theWindows Logo and connection status. 

    • (See this correction, corrected an error in the boot order in the BIOS since the 'HD' has been 'DISABLED', floppy drive was 2nd "Enabled" and CD/DVD has been 1st disk "Enabled"; and CMOS had "activated" "Floppy drive-1, 44" that has generated this ERROR BLACK SCREEN and interrupt thenormal Windows process at startup computer n and connection. "")

    If all goes well, the MESSAGE is useful, easier, and more clear instructions to resolve for the next person with this problem and will be more quickly find and get back to business with a happy computer!

  • Screen black, but still clocked

    Hello, I have a problem. I'm using Windows 7 home edition. and that's the problem. This happens for 2 weeks, I was chatting with my friend, all of a sudden my screen went black, but my CPU still running. then I restart my computer, after the turn of the cpu on a couple of minutes later (5-15 minutes) the screen went black again. my anti virus do not show any threat, and after the black screen, I can't press CTR + ALT + DEL to Task Manager to get out. but then the still CPU running. Please help me

    Hello

    Why my screen is black when I start Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

    References to Vista also apply to Windows 7.

    No registration necessary data and re - install Windows 7 might be the best option, but here are a
    few others.

    You can save your files by putting the drive in another computer or an external hard drive enclosure, then
    saving them. Do this using several methods to redundantly. Of course, a real computer
    Shop or the manufacturer of your system can help to recover the files.

    Or you can use a boot Ubuntu CD to back up data.

    Use Ubuntu Live CD to backup files from your Windows computer dead
    http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

    --------------------------------------------------------------

    You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
    -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
    then right click on the device and UNINSTALL - REBOOT.

    A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
    ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
    on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
    repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

    First check this thread in case it is simple and if not to come back to this thread.

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

    Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
    base. That there is no information on a black screen as there is just a blue screen
    adds to the difficulty. Often using a restore point or Startup Repair will have no effect.

    You can try a google to see the proposed repairs, whom some have worked however these
    cover a wide field of efforts.

    Here's a video of one of them.

    http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

    Here's another fix
    http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

    You have a window 7 disk? You can try restoring the system to it. If you do not have the
    discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get
    it.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    You can create a recovery disc or someone else use same version (to do the system restore
    It only needs to be bootable).

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    ------------------------------------------------

    These require good Windows 7 drives (especially if you can not start safe mode).

    Try the Startup Repair tool-

    What are the system recovery options in Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    Try Repair Options recovery or a Windows 7 boot disk system

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    -----------------------------------------------

    Here are a few Google searches where many have found different solutions:

    Vista black screen - check that a 1st
    http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

    Vista black screen Solution
    http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

    Vista black screen Fix
    http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

    -----------------------------------------------

    If necessary and you can access all ordinary Windows.

    If nothing works, you can do a repair installation.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    ---------------------------------------------------------------------------

    Another method that works sometimes: at the command prompt, type of Windows 7 boot disk:
    (type in a single line or copy / paste a line at a time and then press enter - do not type)
    parenthesis or "BOLD"
    )

    c:

    cd\

    CD c:\Windows\System32\winevt (there is a space between cd and C :)

    Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

    RESTART Windows

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • To monitor screen black startup even when turned on.

    Hello, John Sherman,.

    Your question about the Microsoft community received a response from stephanie Podder.

    Response

    Hi John,.

    It has long been that you have filed your application. Are you still experiencing this problem?

    If so, let us know we will be happy to help you!

    For stephanie Podder: yes I always face this problem. I need help.

    Read this answer on Microsoft Community

    Hi John,.

    Thanks for posting your question on the Microsoft community.

    Thank you for details on the issue.

    This problem can occur because of driver settings or registry corrupt display.

    I suggest you use the steps in this article and check if it helps.
    Reference:
    Why my screen is black when I start Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

    Important notes:
    Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

    When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Windows media center tuner works fine but won't display of television programs (screen black & no audio)

    Windows media center tuner works well, but won't display (screen black & no audio) of television programs.

    He has no problem display of a recorded program but will not display the digital direct terestrial TV program.

    The problem sometimes disappears and then returns, for example - this morning, after 30 minutes of game time!

    Hi Daniel,.

    Update your graphics card, but also the TV tuner card drivers. Uninstall and reinstall the graphics driver.  Once done, reconfigure Windows Media Center.

    Method 1: Try to update to the latest graphics card drivers on the manufacturer's Web site.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Method 2: Uninstall and reinstall the driver for the graphics card from Device Manager:

    Open the Device Manager

    http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

    Visit the manufacturer's Web site to download and install the latest graphics driver. Once done reconfigures WMC.

    Method 3: See the article provided below and check if help.

    Set up a TV signal in Windows Media Center

    http://Windows.Microsoft.com/en-us/Windows7/set-up-a-TV-signal-in-Windows-Media-cent

    Method 4: Uninstall and reinstall the Windows Media Center:

    Stage i: uninstall Windows Media Center:

    a. go to start and in the search type 'Turn Windows has or not'.
    b. click on "Turn Windows features on or off".
    c. find multimedia and uncheck the brand in the face of Windows Media Center.
    d. restart the computer

    Stage II: Reinstall the Windows Media Center:

    a. go to start and in the search type 'Turn Windows has or not'.
    b. click on "Turn Windows features on or off".
    c. find the multimedia functions and place a check mark in front of Windows Media Center.
    d. restart the computer.

    Let us know if you have other questions about Windows in the future.

  • Screen black with error number but Messages lcd fan turns on and the hard drive makes noises.

    HP Pavilion tx2510us

    I did the hard reset, but still have a blank black screen.

    Put a new hard drive.

    Verified the memory also.

    Now what should I do?

    Hello

    Have you tried reseating the memory modules one at a time? Reinstalling the hard drive can also help.

    Just check out the link below and check if something is missed...

    HP Notebook PC - troubleshooting screens black with no start-up or start-up error message

  • HP Pavilion DV4-2045DX at startup screen 'black '.

    My HP Pavilion DV4 at startup screen 'black '. It normally happens with all audio prompts password and subsequently entry, audio acceptance... password screen but 'black '. This problem is intermittent, but happens on a basis more common. Any suggestions would be greatly appreciated.   Peace

    Screen is black from the beginning. Hooked up a monitor to laptop and everything's fine. Appears to be a screen, a problem of connection or link screen. Thanks for the input.    Peace

  • X121e - black screen after waking up from suspend-to-RAM

    I am the owner of a X121e ThinkPad - Notebook Type 3051-5QG (processor of AMD E350). After a BIOS - update 1.07 to 1.16 I had a problem to wake up from the S3 - suspend to RAM function.

    Restarting the laptop and the fan works but there is no beep and the screen remains black. There is no way to operate except a complete hard stop by pushing the button on/off voltage.

    Someone knows the problem and has a solution? Or should I wait and hope for the next Version of the BIOS solve the problem? I would come down to 1.07 BIOS, but I'm afraid that this is not possible.

    Since 02-12-2012 Lenovo has released a new Bios-Version 1.17.

    I installed the update today and the problem disappeared. I hope that there are no new bugs in this Version of the Bios, but so far, everything seems to work fine.

  • Screen flashing horizontal lines after replacing the RAM

    Hello world

    Today, I replaced the original 2 2 GB RAM each with 2 other 4 GB each (Kingston) for better performance.

    I have a Macbook Pro end 2011 15 ", IOS 9.3.1.

    I opened the computer it vacuum cleaner very carefully, with the lowest power and then I removed the two RAM.

    I'm not new, the machine worked perfectly for 20 minutes, then the screen went black (electricity was running in it, I could see some lights on the bottom), I did close it with the button, turn it on and horizontal lines appeared.

    I turn again and nothing has changed. I replaced the new memory with the 'old' and I still have horizontal lines that cross the monitor (white, grey, black).

    Any idea of what is happening and how to fix it?

    Thank you in advance!

    That could be the problem:

    http://www.Apple.com/support/MacBookPro-videoissues/

Maybe you are looking for

  • A book produced in iPhoto can be printed at home?

    I used the function 'Print a book' opening in the past with good results. Now, the opening is very slow. So........ Can I use iPhoto to makle books and print them o my printer? I use an iMac in early 2009 with a lot of free GBs and El Capitan.

  • HP update problem!

    I ran recently an HP update... While he was installing wiped evrything... I rebooted and nothing happens... can not get into BIOS f8 screen nothing... and get 2 beeps evry few seconds... HP online that said file has been damaged and they will send a

  • Problem with the firmware (4.1.112.33292)

    HelloI have iomega ez & I installed the latest firmware (4.1.112.33292) but after my product to date, 2 times in a week was out of reach & I forced it disconnected and now I downgrade firmware for 4.1.110.33149 to solve my problem

  • HP 4630: How can I change from German to English

    Hello, my HP 4630 screen is in German, and I need to go back to English. What should I do to change this? The HP serial No. is (deleted content) Thank you.

  • How to start VDS in Windows Vista Ultimate 64-bit?

    I have a problem, and it's been a while and still not solved... I have Windows Vista Ultimate 64-bit right now and I want to upgrade to Windows 7, but installation is NOT going through perhaps because of the virtual disk service. How to START the vir