screen cracked after 1 hour

then today I received the z3 and the phone was cracked on nowher no drops or the impact. now the screen is so more respondingt o my fingers is there a chance someone can tell me what to do or to know the exact price for a repair. THX xxxxxxxx

Sorry to hear that, you will need to contact your local care Xperia

http://www.sonymobile.com/global-en/support/contact-us/

Tags: Sony Phones

Similar Questions

  • Satellite Z830 - screen cracked after 4 months

    I bought my Z830 in July 2012.
    While I liked using the computer, the screen cracked after 4 months of normal use.

    I had to deal with the computer slowly and have always used a bag of ice and computer when they travel with him. The crack occurred while the computer had been sitting on a desk for about 2 months.

    I had about 10 Toshiba computers laptops/notebooks over the past 15 years and have never had a cracked screen before.

    It seems that a cracked screen is not covered by warranty Toshiba, so it is very disappointing.

    I would be very interested to know how many others have had this experience with the Z830.

    Peter

    > I had about 10 Toshiba computers laptops/notebooks over the past 15 years and have never had a cracked screen before.

    I had 3 different notebooks in the past and never had this problem and from my point of view this question cannot goes without any pressure from the outside

  • After several hours of time, BSOD and it asks to run without failure or normal screen mode

    Hello

    I had this problem for a month, after 1 to 10 hours from the time of execution (occurs to me after an hour or half a day)

    my computer hangs just to the page black screen in safe mode, no errors or anything, even when I run back normally.

    Ive been looking around for quite a while now, try bugs from various websites and suggestions.

    I type of major changes to the system that I did the last half a year.

    Accident can happen in playing a game or even your browsing Firefox. Maybe she took place even though I did not use the computer, came back, and it was restarted. Things I suspect is either faulty RAM, perhaps poorly applied thermal paste on the CPU fan cooler? The two monitors that I have connected? Insufficient for new updates that are listen below cause the PSU stress itself? Tests I've tried on the stress after an hour of running time, I can not stress just before the cause of the accident that I don't know when it will happen. May be peaking suddenly what related material.

    More news a few months (more) I installed a Neovo 19 "F-419 19 inches in addition to my SAMSUNG 24" syncMaster B2430L display screen:, my main one is the 24 "one.

    New its add-on card: using an extra sound card that works OIC Configuration Audio-3D, 3d Audio Engine: Xear3D, Audio CODE: CMI8738, worm 7.12.8.1740. Looks like an old, I tried looking for program updates but has not been successful. Using this soundcard for its 4 jacks 3.5 mm for use headphones 5.1 surround.

    Computer specifications previous (two years, installed in the laboratory of the shop where I bought it):

    PSU: HEC 600W 12CM FAN A.FPC WIN + 600

    CPU: Phenom II 955 Am3 AMD Q.C.

    MOBO: GA790XT-usb3 Am3 + GIGABYTE AMD

    GPU: ATI Radeon 5770 1 GB-5 MSI

    HD: 500 GB 7200 16 MB SEAGATE Sata2

    MEMORY: VALUE GEIL 2x2G (4 GB) DDR3 1333 MHZ

    DVD: AD7240S SATA SONY OPTIARC DVDX24 DL

    OS: WIN 7 HOME PREMIUM 64 - BIT ENG

    Specifications of current computer (I installed all of these additional components myself with a friend, checked everything twice recently):

    PSU: HEC 600W 12CM FAN A.FPC WIN + 600

    NEW * CPU: Intel Core i7-3770 3.40 Ghz

    MOBO * NEW: MSI-7798

    GPU * NEW: Nvidia Geforce 660 Ti MSI

    HD: 500 GB 7200 16 MB SEAGATE Sata2

    MEMORY: VALUE GEIL 2x2G (4 GB) DDR3 1333 MHZ

    MEMORY * NEW: 2xKingston 2 GB DDR3 1333 Mhz Pc3 - 10666 that was added in addition to the previous Ram

    DVD: AD7240S SATA SONY OPTIARC DVDX24 DL

    OS: WIN 7 HOME PREMIUM 64 - BIT ENG

    Things I've tried:

    You use check to highlight my drivers, he did cause a blue screen and my computer has not started. I didn't know how to proceed from there however.

    Stress tests my CPU, GPU, PSU temperatures were not unusual or high. Downloaded my MSinfo32, DXDIAG and my last crash DUMP in this link, the rar file. http://rapidshare.com/share/84E3783BE3B66979375E6D2B2C2E7A56

    CCleaner ran in safe mode, fixed broken files and etc. "."

    A ran AVG in Mode safe, Full scan both hard drives. Nothing found.

    My computer case is half open, helping the ventilation and verification problems with cables that are not connected correctly.

    Uninstalled all unnecessary programs.

    Posing this thread.

    If you need other information that I forgot to mention, please tell me that I will do my best to post it here.

    Thanks in advance to all who read this.

    Hello

    The attached file of the DMP is to bug checking DRIVER_VERIFIER_IOMANAGER_VIOLATION (0xC9) .

    This is the verification code bug for all the Verification of i/o Driver Verifier violations.

    Cannot load the image dtsoftbus01.sys, 0n2 error Win32
    WARNING: Unable to verify timestamp for dtsoftbus01.sys
    ERROR: Module load completed but symbols can be loaded for dtsoftbus01.sys
    Probably caused by: dtsoftbus01.sys ( dtsoftbus01 + 1360 )

    -FAILURE_BUCKET_ID: X64_0xc9_23e_dtsoftbus01 + 1360

    Driver found dtsoftbus01.sys auditor perform invalid function calls, causing the corruption of the system. This is the driver for Daemon Tools. Daemon Tools is a very popular cause of BSOD in 7/8 base systems. Please uninstall Daemon Tools. Alternative imaging programs are: MagicISO, Power ISO, etc.

    Kind regards

    Patrick

  • Gen AppleTV turns off after an hour

    My appletv gen 4 out of the box - off after an hour

    even if pandora streaming is active.

    There are settings for automatic stop that

    determines stop. I discovered after a lot of

    trial and error to determine the cause of this.

    but I ask - why the apple factory located it as one

    by default? how boring it was... you have no idea.

    That drive us crazy for a few days trying to

    determine what happened

    Apple - what u thought?

    Hi, we you streaming pandora on ATV? Or were you AirPlaying it to another device? If it's the last audio AirPlay is regarded as a process in the background, as readers of music on iOS. Thus, it is not override settings screen of sleep and sleep. The solution is to simply move these parameters out of the way.

    Furthermore, you're not talking Apple here, this is a user forum. To suggest improvements to Apple, try https://www.apple.com/feedback/appletv.html

  • My screen cracked... Let the seeds start

    Hello everyone,

    I dropped my iphone in the water not once, not blink of an eye, but three times, and on top of that, I also cracked my screen. After two weeks of my phone now on she began to have a series of glitches, beginning with: sharp phone without warning or Benoit dead phone, changing the time, the phone with not not a charge, phone ONLY come on when it is plugged. Should I just buy a new phone, or it can be saved?

    Signed,

    Wrestling is real

    chonticurtis wrote:

    Hello everyone,

    I dropped my iphone in the water not once, not blink of an eye, but three times, and on top of that, I also cracked my screen. After two weeks of my phone now on she began to have a series of glitches, beginning with: sharp phone without warning or Benoit dead phone, changing the time, the phone with not not a charge, phone ONLY come on when it is plugged. Should I just buy a new phone or If it can be saved?

    Signed,

    Wrestling is real

    Do you really need to ask this question, if your phone is having what deliver you damage have done.

  • Predator G3120 stops working after one hour (exactly)

    Acer Predator G3120

    Windows 7 (64-bit)

    State of origin

    Stops working after one hour (very reproducible)

    Hello peoples,

    For more than two years now, I have an Acer Predator G3120 and I experienced a lot of pleasure from it. Three months or so, however, I can't keep the pc for more than an hour later. If I have all the programs running at the time where he spent an hour limit, my pc crashes and gives me a BSOD (mainly stopcode 0x000000f4). If I don't have any programs running, it will be impossible to open all my desktop shortcuts, and if I try to go to 'My Computer', explorer.exe stops working. ALT + ctrl + del will result in a black screen. I'm quite a greenie when it comes to things like these, but I am I supposed to do something with my SSD.

    Download the latest drivers did not work, however. Also, I'm sure that this doesn't have to do with malware, as I couldn't detect any with different scanners, and I put my pc back to factory settings (which makes it quite certain, that he doesn't have to do with any installed programs).

    At this point, I'm running out of options, and so any help would be most welcome.

    Thank you for reading,

    Skumawiki

    Once connected to your system, your position SSD is not serious.

    Try this:

    http://www.crucial.com/wcsstore/CrucialSAS/firmware/M4/070H/1-0-0-90-crucial-070h-07-00-SSD-firmware...

  • BSOD after 1 hour of computer use

    Recently, I've been doing the dreaded blue screen of death on my computer. I use XP SP2 Edition.

    It occurs usually after 1 hour of use on the computer, a message appears and it restarted the system has recovered from a serious error by saying so please inform microsoft this problem. A log of this error was created.
    What can I do?
    Help!

    Generally?  N °

    Of course - you may lose files with this question - so everything is possible.  ;-)

    That's why everyone who works with computers always harps on 'backups backups backups'--> after all, you have the opportunity to go back and get something that has been lost destructively in other aspects of life again to the * exact * same State?

    Service Pack 3 (SP3) was released more than three years ago: April 21, 2008.  Support for Windows XP without SP3 ended July 13, 2010.  If you download the SP3 installed, you will get some other updates that you really need - maybe 90 + of them.

    It's probably best you cleaning the computer some before attempting an installation of service pack 3.  Time - this will take, but in the end, you should end up with a much more stable and secure system - faster than ever possible.

    In the order shown, do not jump...

    First of all - download, install, operate and put to update and then run a full scan of the system with the following two (one at a time, reboot in-between):

    After you perform a full scan with one then the other and remove anything they have all two are completely, you can uninstall these products, if you wish.  This initiative will allow to check there is no malware floating around your system which could cause problems.  If you ask - no, Norton probably does not protect you from what these applications can find.

    Download and run the MSRT tool manually:
    http://www.Microsoft.com/security/malwareremove/default.mspx
    (Ignore the details and download the tool to download and save to your desktop, run it.)

    Reset.

    Download/install the latest program Windows installation (for your operating system):
    (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
    (Download and save it to your desktop, run it.)

    Reset.

    and...

    Download the latest version of Windows Update (x 86) agent here:
    http://go.Microsoft.com/fwlink/?LinkId=91237
    ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

    Close all Internet Explorer Windows and other applications.

    AutoScan--> RUN and type:
    %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
    --> Click OK.

    (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

    Reset.

    Now reset your Windows with this FixIt components update (you will be * not * do the aggressive version):
    How to reset the Windows Update components?

    Reset.

    CHKDSK
    How to scan your disks for errors* will take time and a reboot.

    Defragment
    How to defragment your hard drives* will take time

    Reset.

    Download Windows XP SP3 and save it to your desktop.

    Double-click on the downloaded file and follow the prompts to get SP3 installed.

    Your question may or may not be resolved after all that cleaning - such that it could even be hardware related.  Assuming that it is a desktop computer, when was the last time you picked up the machine off, bought a few cans of compressed air and opens the case and the breath in the dust?

  • Installed Vista pack 1 as prompted. Tour is continuing after 10 hours. Monitor says no entries, and falls asleep.

    original title: installed Vista pack 1 as prompted.  Tour is continuing after 10 hours.  Monitor says no entries, and falls asleep.  What should I do?

    My desktop computer has said that there was a problem with the window.  He said that Vista pack 1 expired July 12.  I installed it when prompted by August 6.  He began to run at 18:30 and HP Tower ran all night with a blue and orange light flashing.  The monitor was gone to sleep.  When I turned on the screen this morning, he said that he had no entry and time to sleep.  What should I do next?    I just got internet on 28 June, so don't know what that what is happening.  I get updates automatically.  Why it that not update.  I use another computer to communicate with you because I don't know what to do next.

    Spent by the factory with the OS. After 18 + OVERLAYS on my XP Pro PC I've exchanged on this VISTA Premium 32 bit and after 15 + OVERLAYS on this one, IT WORKS finally.

    This experience as Kosh Vorlon said above RESTORATION anyway possible and go directly to Microsoft for Service Pack so I found this to be the best source

    It's the 32-bit version

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=30

    This is the 64-bit version

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=21299

    Now it's been GETTING all THE UPDATES... I found that the PC knows what to do with them, and without any help from us that it just boot process follow all prompts.

    When it's done GET SERVICE PACK 2, SP2 from Microsoft

    It's the 32-bit version

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=17669

    It is for the 64-bit version

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=17669

    and it goes the same for this time to GET all UPDATES.

    And a my Service Packs note came in the updates of Windows. As well as all updates from the update updates. HP updates are usually for the hardware and drivers.

    Good luck

    RickS

  • Why close and restart after 1 hour, while I am still connected to my computer?

    My computer restarts automatically after an hour and I lose and have to reconnect!  Help! Don't know what to do!  Have windows Vista Home premium. Never had this problem before, until now!

    Hello

    Check the Task Scheduler to see if you have anything put out there.

    http://www.Vistax64.com/tutorials/132903-Task-Scheduler-create-task.html

    ---------------------------------------------------------------------

    Could be linked to the heat, make sure that the computer has adequate ventilation, maybe use a small fan to
    Add air flow. On a PC, the cards, the memory and the cable (both ends) will need to be reinstalled.
    Remove all power and remove and replace those, don't do not just tight. Can't do that on a good laptop.
    Also check the power supply Plan of Advanced Options to make sure there aren't some parameters here that cause
    power off - Control Panel - Power Options.

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    ------------------------------

    Check with this utility, just in case there is a situation of blue screen.

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    accidents and displays the information about all crashes in one table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    ------------------------------

    Also do this so you can see the probable bluescreens. (You may or may not be able to see
    them if they occur even after doing this according to the cause.)

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    =========================================

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    ----------------------------------------------------

    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    ===========================================

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • HP Pavilion dv6 - 2151cl goes into Hibernation Mode after several hours in Standby Mode

    Hello

    Generally, I leave my laptop plugged in and Standby Mode when I don't use it.  I noticed, after several hours (12?), that the power led has stopped flashing.  When I press the power button, it starts as if awakening from Hibernation Mode.  I am using the recommended HP Power Plan but can't find any option to explain what is happening.  Is there a way to avoid change of Mode of Hibernation of Standby Mode?

    TIA

    Hey noahrhys,

    Don't worry - this is normal default behaivor to save energy. It is fully configurable! You can adjust it never Hibernate mode or hibernate after a longer time - whoever you want - all while keeping the mode 'sleep'.

    Here is how to adjust this setting (assuming you are running Windows Vista or 7):

    1. Near the clock on the bottom right, right click on the battery icon.
    2. Click on "Power Options" and a new window will open.
    3. Next to the selected power management, click on "change plan settings".
    4. In this new screen, click "change power avancΘs."
    5. Look around until you find the category of 'Sleep' and expand by clicking on the + next to him.
    6. Find the "Hibernate after" category and expand it by clicking on the + sign next to it.
    7. Adapt these 2 values (on battery and sector) to one that you would like (type in the minutes). You can also type zero (0) to disable Hibernate completely.
  • When you try to FolderLink via Box, I get a confirmation message that the file is downloaded, but nothing happens and after an hour it is still downloading.

    When you try to FolderLink via Box, I get a confirmation message that downloads the file weeding, but the boy until the wheel turns and turns and after an hour or two it is still downloading. At this point I give up. I can download OK directly to their Web site box. He used to work a few months ago. I'm on Thunderbird V 38.2.0

    Instead, you can use Dropbox as FolderLink provider.
    Install this add-on.
    https://addons.Mozilla.org/en-us/Thunderbird/addon/dropbox-for-FileLink/

  • I do not want my deleted messages automatically removed after 20 hours. I'd rather remove my deleted messages that I choose.

    All my deleted emails disappear after 20 hours after their removal by me. I want to access my emails deleted and that manually remove as I wish. Can't seem to locate a location to choose this option?

    Thank you

    Just as keeping food remains you want later in the trash, keeping the e-mail that you want to keep in the trash folder is not a good idea.
    I suggest you create a new folder for this purpose and use it instead of the trash folder. As you can see, you don't have complete control over the operation of the trash.

  • GarageBand 10.1.2 to stop recording after 2 hours

    Hi all

    We use Garageband to record longer sessions. Real, we have the problem, that Garageband continues to record exactly after 2 hours and 15 minutes.
    We tried 6 times and it was always the same. There is enough free space on the disk (SSD) and he quickly enough (MacBook Pro with i7/16 GB RAM).

    You can start immediately after he stopped without registration issue.

    We use multitrack recording with 3 pickups.

    No idea why Garageband to stop recording after the same time?

    Thanks for your comments or ideas to solve this problem.

    It depends on the number of measures. Recording will stop after 9998 measures. If the tempo is high, the length of the record is shorten the with a slower tempo.

    Take a look at this page of bullets & OS: http://www.bulletsandbones.com/GB/FAQPages/RecordLength.html

    Another limit is the limit of file size of 4 GB for AIFF files, but you would not have reached this limit with only two hours of recording.

  • After 24 hours my second episode of my Podcast still does not appear in the store even if it shows to subscribers. Should I be worried?

    Hello!

    I recently published my podcast and my podcast and first episode both published to the store without any problem.  However, I posted my second podcast to my RSS feed yesterday and although he shows to my subscribers, it has not yet posted to the store after 24 hours. I updated my feed with Itunes and validation to check for errors, and everything seems to go well on my end.  Should I be concerned about or will I be impatient?

    Thank you!

    When you add a new episode to your stream and download it, it immediately appears for subscribers because their iTunes application reads the stream directly and the store is not involved.

    However, due to the multiplicity of the podcasts in the store (in thousands) the store caches the flow and it checks updates periodically. For this reason, there are usually 1-2 days for new episodes to appear in the store: sometimes it can be lower, and sometimes the whole process seems stuck and it may take several days.

    24 hours is a bit early to be worrying - it will be available for subscribers, it must appear in the store to another day or two. If it doesn't, go to Podcasts Connect, log in, choose your podcast and click 'Refresh Feed'. Give it time - the store can take a day or two to update. If that does not work, contact support and ask for a re-indexing: who can solve it. Go to https://itunespartner.apple.com/en/podcasts/overview and click on the link "Contact us" at the bottom of the page.

  • Recently, I went to the Apple Store in Easton, because I broke my screen. After that I got my fixed screen it worked for a little while but now it does not meet my contact

    Recently, I went to the Apple Store in Easton, because I broke my screen. After I got my fixed screen, it worked for a little while but now it does not meet my contact, Apple is responsible for this and how do I get my screen works again?

    Take it back to the Apple Store. Repairs made by Apple retail stores are still covered by the warranty.

Maybe you are looking for

  • Where can I get the 'Mobee Magic charger for Apple Magic Mouse'?

    Where can I get the "Mobee Magic Charger' for my Apple Magic Mouse 2?

  • Where can I find drivers for Satellite L855-159?

    Hello! I am a recent owner of a new laptop Toshiba Satellite L855-159.I can't find the drivers listed for her. I have download some drivers for laptops similar to the series, as the ethernet driver. That works very well to this topic, but I can't see

  • Satellite A30 - sound began to deteriorate

    Hello I have a Toshiba Satellite A30 Latop (Service Pack 3) and, recently, the noise began to deteriorate and sometimes I have no sound at all if I was using the laptop for a while. A reboot seems to fix the problem, but after 30 minutes, do it again

  • Cannot install Linux alongside Windows-8 (UEFI)

    I have HP pavilion 23-b026 all in one PC, which came with pre-installed Windows-8. Now, I want to install Linux alongside W - 8. (There is unallocated space on the disk about 250 GB) But when I try to boot from Linux-DVD, BIOS allows system to be boo

  • ' Turn off display "intermittently stops working.

    After time setting to turn off the display, the display will sometimes exit when its supposed to and sometimes remain running indefinitely. New resetting does not help, the behavior remains the same. The setting is on my laptop in power "Balanced" pl