Screen Dell 5 k with 2013 Mac Pro in El Capitan

Similar Questions

• No noise in Bootcamp with 2013 Mac Pro Windows 10 X 64

  Hi all

  Has anyone else had problems with getting audio playback works fine on a Mac Pro 2013 running 10 X 64 Windows at retail.   I know that the speaker in my Mac works because it works fine on OS X and chimes on boot up but Windows there is not a glance.    I did all the basics such as checking things in Manager devices etc.   All Bootcamp support software are installed but nothing.  I'm a total loss of any any input would be appreciated.

  Thank you

  John

  As Apple says have you tried:

  If some features do not work when you start your Mac in Windows 10, try to reinstall the Boot Camp support software to use Boot Camp Assistant.

• Options of the SSD in late 2013 Mac Pro update?

  Options of the SSD in late 2013 Mac Pro update?

  Mac Pro has 256 GB which is almost full despite the displacement of all the large files (Photos, downloads, etc.) out of the disc. I'm at a point where the Player update seems to be a must.

  OWC option seems a bit of a hack using a slower drive and a controller.

  https://eShop.MacSales.com/shop/SSD/OWC/Mac-Pro/2013

  MCETECH claims to use a new disk allowed Apple with trim shoring and the ability of bootcamp to use Windows (important to me).

  http://store.mcetech.com/mm/merchant.MVC?Store_Code=MTOs & Screen = prod & Product_Cod e = 1TBPCIESSD-MP13

  There are eBay sellers who claim to use the running game in recent versions of the end of 2013 Mac Pro.

  http://www.eBay.com/ITM/new-Apple-Samsung-1TB-PCIe-SSD-MacBook-Pro-iMac-MacPro-L ate-2013-2015-SSUBX-/ 151605593746

  and

  http://www.eBay.com/ITM/new-Apple-Mac-Pro-late-2013-1TB-PCIe-SSD-Flash-storage-M Z-KPV1T0R-0A1-605-00108/351601210482?_trksid=p2047675.c100005.m1851 & _trkparms = AI d 3% D 222007% 26algo % 3DSIC. MBE % 26ao %3 D 1% 26asc %3 D 38804% 26meid % 3Dff768b1c384b46d68010 bf8050452542% 26pid %3 D 100005% 26rk %3 D 4% 26rkt %3 D 6% 26sd %3 D 151605593746 & rt = nc

  two sellers have a very high rating, but I don't trust eBay.

  The MCETECH seems to ensure ongoing compatibility as it is a part of Apple.

  Any ideas or experiences with the above or other good known options?

  OWC option seems a bit of a hack using a slower drive and a controller.

  https://eShop.MacSales.com/shop/SSD/OWC/Mac-Pro/2013

  I think you're bad read the OWC page. They propose to replace the internal SSD stick with their largest capacity SSD stick. The external box is only for you to continue to use the original USB key (perfect condition) as an external drive, if you wish.

• connecting the iphone 6 with the Mac Pro for messages

  My iPhone 6 is not bind properly with my Mac Pro for Messages.  When sending a message from the Mac Pro, the message will be displayed on the iPhone immediately, but this is not always appear as "sent" or "delivered" on the Mac; It just shows an incomplete treatment green line at the top of the message on the Mac bar.  This occurs only with SMS messages.

  I followed the instructions to connect the two devices using my Yahoo account, but it still does not work properly.

  Any ideas?

  Make sure that your iPhone software is up-to-date.

  Tap Settings > general > software update

  The latest iOS version is 9.3.4.

• How can I synchronize my emails from my Mac Pro on my iPhone and iPad Mini?  My iPhone and iPad are synchronized, but not with my Mac Pro?

  My iPhone and iPad emails are synchronized, but not with my Mac Pro?  Example, when I delete an email from my iPad, it is deleted in my iPhone but not my Mac computer.   How to connect the three...

  An e-mail account? More than one account? All accounts?

  Who is the provider?

  What type of IMAP/Exchange or Pop3 account?

  Only IMAP/Exchange accounts synchronize the device and some accounts as Google can be configured in any way.

• How to use the adapter from the wall with my Mac Pro laptop?

  How to use the adapter from the wall with my Mac Pro laptop?

  The AC wall connector is not compatible with the outlet on the MBP?  As the MBP charger will work from 100v to 240v, a transformer is necessary.  You need a converter that connects to the power outlet home and is compatible with your MBP.  You can buy the Apple travel kit:

  http://www.Apple.com/shop/product/MD837AM/A/Apple-world-travel-adapter-Kit

  Or you can use a single specific converter for the geographical area:

  http://www.Amazon.com/orei-grounded-universal-adapter-Singapore/DP/B004SCSV2U/re f = sr_1_4? ie = UTF8 & qid = 1460735377 & sr = 8-4 & keywords = us + in + uk + power + adapter

  (it is a UK USA example)

  Or you can get the converter that adapts the charger directly:

  http://www.Amazon.com/HIOTECH%C2%AE-extension-charger-connecting-specification/d p/B00MA48JZW/ref = sr_1_3? ie = UTF8 & qid = 1460735486 & sr = 8-3 & keywords = us + in + uk + power + ad aptor + apple + charger + cord

  (again, this is for a UK plug.)

  Ciao.

• What is the situation with the mac pro users and map of cuda for ray-tracing work?

  What is the situation with the mac pro users and map of cuda for ray-tracing work? If it is not necessary or should I try to install a?

  CUDA acceleration is no longer under development, and I've only played with traced to the RADIUS on a few test projects. If I need 3D dimensions objects I used C4D Lite, which is now included in EI

• A Dell U2414H can work with a mac Pro 3.1 (10.9.5) and an ATI Radeon HD 2600 XT?

  Hello

  Here's my dilemma. I recently bought a Dell U2414 as a 2nd monitor to replace my old 2407FWP Dell (has died) with the understanding that the new monitor would work (via a DVI to mini displayport cable). I bought a high quality 3rd party DVI to mini display port cable. Obviously, the monitor does not. I can't get a direct Dell response if this will never work. My hunch is the graphics card can not simply to manage this monitor and it won't work with my system.

  FYI: I also have an old DELL G2210 (resolution: 1680 x 1050 at 60 Hz) on the other DVI port. So I'll still need a DVI port.

  Here are the current video card info:

  ATI Radeon HD 2600 XT: VRAM (Total): 256 MB

  Here is my Mac info (on 10.9.5):

  Model name: Mac Pro (early 2008)

  Model identifier: MacPro3, 1

  Processor name: Intel Quad - Core Xeon

  Processor speed: 2.8 GHz

  16 GB OF RAM

  Firstly: If someone can give an answer as to if the monitor works with this graphics card, just to settle this matter and move?

  Second, assuming that no, my choice appears to be:

  1. return the screen and try to find another 24 "that will work with the original map (someone there suggestions for what is currently still deployed that would work with such an old graphics card?)
  2. upgrade the map so it can handle the new monitor but still run the old.

  I chatted with OWC on this subject and they suggested 2 possible upgrade cards but they will not be returned since they could not guarantee that they will work with this monitor there is a risk.

  Dell has been pretty useless (I have no one said yes, the other doesn't).

  Here are some suggestions from OWC (see below). Can someone comment and tell me if or the other will definitely work or offer another solution? I would really appreciate it!

  ATI Radeon HD 4870

  https://eShop.MacSales.com/item/Apple/MB999ZMA/

  Or more likely: ATI Radeon HD 5870

  https://eShop.MacSales.com/item/Apple/MC743ZMA/

  I know there are more expensive options (Saphire?), but I don't want to spend $500 for a graphics card on a 8 year old computer.

  Thank you!

  Best,

  Joel

  This is a screen with a displayPort, a DisplayPort outside and a Mini DisplayPort connector, in 1920 by 1080 max resolution.

  You are WAY overthinking this. A mini DisplayPort to mini DisplayPort or a Mini DisplayPort to [size] DisplayPort should do all the work for about US$ 10, no conversion.

  You don't need another card unless your is dead.

• What happens with the Mac Pro (end 2013)?

  Hello!

  I'm Marc Urtasun, Spain. I have a Pro Mac (end 2013) with 3, 5 GHz 6-Core and two AMD over-pants D500. I am an artist and a 3d animator and I always work with 3d, made, video... and I need a more powerful computer now, because on the 3d, Mac users are moving to Windows due to the advantage of the GPU with CUDA...

  I would like to ask two things:

  -are planning an update or something for Apple's Mac Pro?

  -Can I update my Mac Pro 12 hearts? or update with a graphics card more powerful?

  Thank you

  -All those here who know the future plans Apple could not reveal that, because of the NDA, they signed.

  -Yes, you upgrade to the D700, but that requires to replace two wide boards that contain the GPU and other components. You will find the D700, as Apple does not sell to them.

  -The CPU can be upgraded. See:

  https://eShop.MacSales.com/MyOWC/upgrades.cfm?sort=pop & Model = 486 & type = Processor

  However, some app can use more carrots 6-8. Almost none can use all 12 cores.  When one of your apps look at the CPU tab in the activity monitor and see if you now use fully all 6 hearts.

  You have not said how you memory. Memory can be limited. In addition, sometimes the disk i/o is limiting what drive you have and how ae connected

  -For the good information of 2103 Mac Pro configurations see:

  http://macperformanceguide.com/index_topics.html#MacPro2013

• end of 2013 Mac Pro self begins with red light under DIMM 3

  My end of 2013 "trash" Mac Pro has an intermittent problem on start up - this can take up to 8 auto restarts before it starts to fully operational status. During these reboots red lights are visible through the base, in the area of the 3 & 4 DIMM slots. This happens in about 3-4 times when the Mac Pro is started first thing in the morning. Sometimes - but rarely - it will also restart after a period of normal operation.

  Run diagnostics and, before one of the operations described below, this indicates that all was well but the 2 just many times where I ran diagnosis, he pointed out that no WiFi interface has been installed. Have also run Memtest that since several days of testing, running as a single user with multiple passes, says memory all OK.

  Have tried resetting the SMC both NVRAM and update of the OS. Removed and reinstall the RAM modules. After the reinstallation of modules, first start only registered DIMM 1 & 2 modules. There seems to be no problem with the seating, nothing loose or place and taken liberation were entirely home. Next and all subsequent boots saved all 4 modules.

  A day of immediate bootups without problem but then, first thing this morning, had two cottages restarts during startup. I gave the 2nd boot press / press and hold the 'on' then booted diagnosis - no problem not indicated. On the startup resulting, everything was fine.

  I guess the problem is in, either the GPU or with 3 & 4 DIMM slots. Can someone tell me the meaning of red lights? Diagnosis would be easier if I knew.

  MacPro6, 1 (end of 2013)

  3.5 GHz 6-Core Intel Xeon E5

  16 GB 1866 MHz DDR3 ECC

  AMD over-pants D500 3072 MB

  10.10.5 OS

  Hello Bob,

  Thank you for using communities of Apple Support.

  I see that you have found a red flashing in the 3 & 4 DIMM slots. Typically, this indicates a bad RAM module or the module is not seated properly. I see you have already done the troubleshooting that I would have recommended. So, unless you have third-party RAM installed in your Mac Pro, I suggest you take a look at the following link to access the service options for your computer.

  Answer - Mac desktop computers service center

  Happy holidays.

• El Capitan with old Mac Pro update

  I have an Apple Mac Pro "Quad Core" 3.2 2012 computer with 12 GB of RAM. I am reluctant to give up the thing because I have 4 Bay SATA I can use to easily swap drives.

  Running the latest version of Yosemite, the computer may appear VERY slow, especially when a background (backups, indexing of Spotlight) task are underway.  Clean caches helps some, for a while, then it gets pretty slow again.

  Can anyone share some thoughts on what upgrade to El Capitan might do? I had read that it is largely an improvement in the performance of Yosemite, it seems as if it might give me a boost in performance. However, each successive OS update saw things slow further.

  Then, add more RAM would help things?

  Thanks in advance for any help.

  If Yosemite is slow, then you must fix before attempting to upgrade. Make a backup or your system, then wipe the drive and install a new copy of Yosemite or El Capitan.

  Install or reinstall OS X from scratch

  Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Erase the drive:

  1. select in the main menu disk utility and click on the continue button.

  2. once the charges of THE select your boot volume (usually Macintosh HD) in the

  list on the left. Click on the Erase tab in the main window of THE.

  3. set the type of format Mac OS extended (journaled). If necessary, click

  Security and button all the option data from scratch in a single pass. Click

  the clear button and wait until the process is complete.

  4 leave FROM and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the install button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible

  because it is three times faster than wireless.

  This should install the version of Mac OS X that you had installed it. Upgrade directly to El Capitan.

• Looking good 4 k monitor for end of 2013 Mac Pro

  I just ordered and received the LG 4 k monitors but when comparing them with the Apple thunderbolt display monitor they were still close in brightness or color rendering. They had an orange very little the cast to them. They were the 31MU97C-B models and I could not find any reviews on them. They were actually newer and cheaper than the model 31MU97 (without the C - B).

  So I sent them back. They were only 900 each, shipped. Is there anyone in the sound of my voice who can tell me a good 4 k monitor about the same price comparable to the Thunderbolt display, but in 4K? I've searched high and low.

  Thanks in advance

  James

  Take a look at BenQ monitors. I use a pair of 24 '' those on my Mac Pro 12-core gaming and they are great. I got them to Fry. mine are not K 4s, but you could do a search and check BenQ 4 K specifications and perhaps find a store with some on display to check. Mine give identical color between the 2, so their QC is decent. (I got a pair of ViewSonics never able to calibrate to match!) They make the ViewsSonics (attached to my older PowerMac G5 and sat next to my Mac pro) look really weak and pale on the best settings of ViewSonic.

  http://4k.com/monitor/a-review-of-the-benq-bl3201ph-32-ips-led-4k-monitor-with-3 2-led-lit-screen inches / is a review on the BenQ 32 "4K that Amazon sells for slightly less than $900. Be sure to watch the 3201PH against the PT. 3210 (who sell the FRY and even Wal-Mart) I don't think that the PT would be like good video. (he does not mention 4K on his form and sells for hundreds less.)

• User interface artifacts in beta of Mac OS Sierra on 2013 Mac Pro

  I try the beta version of Mac OS Sierra on my Mac Pro 2013, and when you scroll brushes or other elements of the user interface, there are artifacts that remain on the list that make it difficult to see.  The problem persists even after disabling processing GPU in Photoshop and restart.  Clues as to what might be the cause, or someone else has this problem?  Any other apps don't do this on my mac.

  

  If there is anything that I've learned, is not posting on a forum like this search for information or to investigate a problem that may occur with future updates.  You'll just get taught as you do not know what a beta is.

• Creative Cloud installation issue - error code: 72-2013 Mac Pro - Mavericks 10.9.5

  I'm having the same problem.  I'm on a Mac Pro installed Mavericks 10.9.5 2013.  Unfortunately, I uninstalled all Adobe CC applications and ran to the CC cleaning tool.  I also used a utility that allowed me to search for files and folders hidden and visible.  I searched and deleted everything about Adobe Creative Cloud and Flash of my computer (with the exception of the fonts and the ColorSync profiles).  I also tried logging in as user 'root '.  None of them worked and now I am without any of my Adobe CC applications.

  

  I upgraded to Yosemite and everything works fine now.

• problem with my mac pro book and the appstore

  I have a problem with my Mac Book Pro (2.53 ghz processor intel core duo / 0sx 10.6.8) and the app store:

  My apps no longer works after upgrade on the app store... Help :-(

  Restart in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

  Once logged in go to the Terminal

  type

  Open $TMPDIR... me.

  Delete the folder

  com AppStore.Apple

  Close the terminal

  Open the App Store