Similar Questions

• Satellite A60-122: screen does not work - rest black

  Hello!!

  Can someone help me please on a screen problem? I have a Toshiba Satellite A60-122 and when I turn it on the screen does not work. It remains black as if the power of the laptop was turned off. I tried to connect the laptop to an external monitor, but it still does not work. I have no more ideas of what can do to make it work.

  I already told to format the pc with the cd of restoration but without an image, it is impossible to do anything...
  Thank you

  Isabel

  Hello Isabel

  I'm not an expert, but if there is no image on LCD internal display and the external monitor, I assume that there is a problem with the graphics card. I think you should contact the customer Service of your country partner and let check the device.

  I also hope that the warranty is still valid and if something needs to be replaced they will do it for free.

  Bye and let us know if you have more information about it.

• Satellite L300 - 1-5 - the screen does not work

  Recently, I encountered a problem with my laptop, the screen does not work.
  I tested my inverter of the screen and my backlight lamp to see that if that was the problem, but they both worked perfectly, I then tried the entire screen with the parts and that worked too. (I tried in my friends Toshiba Satellite L300 - 217)

  Then I looked around online and got told to try to connect my laptop to an external monitor, so I did and the screen didn't work there either. So now I'm stuck, I have tried everything even made sure all connections aren't loose etc but it still does not.

  Anyone know what the problem with my laptop?

  Thank you, Tom

  Hey Buddy,

  > connect my laptop to an external monitor, so I did and the screen didn't work there either.
  This means that the internal monitor is ok and the reason must be the graphics card or card mother herself.

  I guess for now, you get only a screen empty and nothing happens on your laptop?

  In this case, you should contact the closest service provider authorized in your country. Just get in touch with the guys and ask for help. They can check the cell phone and fix it! ;)

• Black screen boot, light works.

  Hi, I have a 2011 end pro 15 "macbook. Two days after leaving a program that my screen went black, the lighting of the screen does not work. Whenever I reboot the screen becomes black. I also tried to reset the NVRAM and SMC memory and installed the new update of el capitan, does not work either. Safe mode works quite 'lag', especially when scrolling in safari, the screen flashes.  Safe mode and recovery mode function, so I did a time machine backup in safe mode and re-installed el Capitan, nothing has changed. I am writing in safari in recovery mode and have no problem. I hope I described the problem enough for someone to recognize.

  I'm running out of ideas and advice of other forums, could someone help?

  That the computer is running in Mode safe, but not after a regular boot gives strongly suggests this is a driver problem. Safe mode starts with the bare minimum of drivers. You say that you have re-installed 10.11 and that you have saved, but you won't go into the details. Did you erase the hard drive, install 10.11, and then use Setup Wizard to restore your applications and data?

  What I would do is run the first Apple Hardware Test. (Reboot, pressing the D key until the test of the system is displayed.) Run the extended test. If it passes, make a final backup of TM and then boot into recovery, wipe the drive, download 10.11 and reinstall. Ordinarily I would run Setup Wizard then, but in this case I would like to make an account - don't use your usual account name - and go to the desktop. Then I shut down the computer and restart. If all goes well after the restart, then I would use Migration Wizard to migrate data and applications. Once completed, restart again.

  At this point, two things is possible: all is well, or the LCD screen is black again. If it is the latter, you know that something in your account of the system is the cause of the problem and we can talk about how to make to recover from that in another message.

• Satellite P50T-A-119 - screen does not work and recovery never ends

  Hello

  I have a Satellite P50t-A-119
  The built-in screen no longer works:

  The Toshiba leading innovation splash screen * never * appears on the * built-in screen *.

  On a * connected external VGA-display * I see the following type of screens (if the machine was forced to stop, it can detect before if connected externally powered, another screen image any at all):
  -BIOS (after F2)
  -Boot (after F12)
  -all screens simple to begin repairs (with a blue background).

  I already tried all possible types of recovery (the recovery on the HARD drive partition, with 3 sets of recovery DVD), repair, refresh, never successful auto repair.

  When I start a recovery from DVD (with the external screen), it wonder in order all DVD, copy the files, etc., request to restart the computer. Then after the Toshiba, Leading innovation splash screen appeared and shot a little, I * don't have an external display black-lightning *.
  When I start a recovery from the HARD disk, the Toshiba leading innovation appears and for a long time increases %-complete. After a while (every 45 minutes approximately at 60%), I have the same situation: only an external black lightning.

  This situation is already after I sent the machine (with the same symptoms) to Toshiba service center. They have reinstalled the recovery image (which I think was still okay) and charged me the equivalent of EUR 100, saying: there is no guarantee. When I got the machine I could actually begin as out of the box, after the updates first 83 (initiated by the preconfigured McAfee) and 2 reboots of the laptop is already more (hangs up, without the screen, etc.).

  So my questions:
  -make anyone had similar problems? And a solution ;-)
  -Doesn't he know about the procedures used by the service center to reinstall the recovery image (I'd like to be sure that it s warranty/defective material before I send it again)?
  -A way to check the material?

  Any help is greatly appreciated.
  LeMeutz

  Hello

  Sorry to hear that you have all these problems with your laptop.
  At first, I must say that I've never had such a problem and can not say with certainty what can be wrong there.

  In my opinion, the main problem is the screen. It's OK that you try to use the external screen and try to solve this problem, but I think that recovery image installation is not solution for this. You wrote that your machine has been already verified by Toshiba service but I n t understand what was the problem with the display. Is everything is OK with the screen now or not?

  Back to the recovery image:
  This is a user forum, and I think that no one here will be able to explain the policy of service exact Toshiba but, in my opinion, if you have long guaranteed valid, service provider is required to help you without taking any money except in special situations such as the removal of the BIOS password. So I don't understand why they took 100 euros for the recovery image installation.

  I think you should contact the new service and explain the situation. Do some photos as proof of what exactly happens and tell them you want to have good rework the device. You paid for the new product, you have the guarantee and book must work. If there is problem, service should make the diagnosis, what is the problem and fix it.

  Later when get back, creating you recovery media first. It can be DVD or USB. After having done this disabling automatic Windows update and when you will be informed about updates check the list and install important updates only. Do not install updates such display or WLAN driver.

  Sorry, but I can't say much.

• Satellite M70 - screen does not work properly

  Hello world

  My screen on the laptop does not work correctly. He sometimes starts to white and becomes inadmissible. I followed the problem down, I think of what I can only describe as a fluorescent light ballast in the upper left of the screen (when looking from the front). If I use a clothes pin and apply steady pressure in the upper left corner, it is achievable. That is to say I can still use it.

  But barely.

  When disassemble the screen there is a kind of metal plate on the side of the screen and there is a part called electw f-1 94v-0 coming in contact with this piece of metal. My guess is that the two pieces have shorted or well have become loose such as tightening this part of the screen made it work again. There are discolorations burned on the piece of metal and the underlying aluminum backup that spans the entire screen. There is also a very slight discoloration burned on the play in question also.

  But as I said that the screen still works if I apply the necessary pressure in the upper left corner (currently with a clothes PIN).

  I have no money and cannot pay to have this problem so I have to come with an eraser he togetether solution myself or end without a laptop.

  What is this part? Part of 94v-0 f - 1 of the Electw? It is manufactured by Tyco Electronics, but in a search on their site I could not find it. And Googling shows up nothing important. There are two of these parties behind the screen on my Toshiba. The one on the right and one on the left.

  They are sodered to two sons, one black and one white that goes down to the area of FL Inverter.

  I know it's a long shot, but I wonder what that these pieces don't and if there is no hope for a temporary solution that will alleviate me of having to use a clothes pin in the upper left corner of the screen to get the screen to work. Perhaps by folding the parts to better contact with this or that. I tried to move a party earlier that helped a little but not much.

  It's got so bad that it sparkles now... a little constantly. Very annoying. But... still usable.

  Any input would be appreciated.

  Thank you.

  Carlos

  If the part is attached to the screen, then you will need to replace the LCD screen, or ask someone to fix it if possible.

  You can not buy the different parts of a strainer.

  If you are referring to the wiring harness/LCD screen, then you can buy a replacement at a cheap price. They are not expensive.

• Screen does not work on Satellite L775-10F

  I turn on the computer and the screen does not work. Everything seems fine but the screen is all black.

  Nothings happening. I tried turning market and its still does not.
  I also tried to connect to my TV with an hdmi cable.

  What should I do?

  Connect it to the TV and wait until Windows 7 is fully loaded (you will hear sound Win) than trying to use FN + F5 several times. It may happen on the TV Office. Be sure you use the right settings on the TV (HDMI port must be enabled on the right).

  F nothing helps I presume the display can be defective then contact the closest service Toshiba and let them check your laptop.

• Satellite P100-386 - screen does not work after replacing

  Hello

  my laptop fell and the screen was broken.
  So I bought a new screen from ebay.
  The new screen happened and when I changed it was on mode 'sleep' and that it worked fine, but when I restarted it, the screen didn't show anything and blacklit light worked...

  Anyone know why?
  Is this a bios problem?
  What should I do?

  My laptop is a p100-386
  My old screen was LP171WX2 A4K7
  My new one is LP171WP4 TLB5

  > The new screen arrived and when I changed it was on mode 'sleep' and that it has worked well.

  Does that mean exactly? Did you replaced the screen while the laptop was in Standby Mode?

  If only the internal screen would be affected so you should be able to see something (home Toshiba BIOS screen) on the external monitor
  Can you connect the external monitor (2nd) to the laptop in order to check this?

• Satellite M70-340: screen went completely blue or black

  Hello world
  I just bougth a portable Satellite M70-340 and twice tonight screen entered a single color (black once, once blue) and although I could still hear the windows work (I could hear the Windows alert sounds and alerts by MSN mail), the screen went completely blue or black. I assume that the error is caused by a problem of display driver, so I downloaded the latest driver present Intel on this site. I don't know if it will work.

  My question is, did this happen to someone of you? How did you solve this problem? And even though I have an Intel Graphics Media Accelerator Driver for Mobile, I could install the ATI driver on this site? (I prefer ATI driver since it is out of date.)

  Thank you all for your interest,
  Best regards.

  I guess you have mobile Intel graphics card. In this case, you can only use the graphic driver intel from the Toshiba page or are also website of intel.

  But you cannot use the ATI graphics driver! You laptop has ATI No. graphics card!

  However, you suggested that it is a new laptop. I would recommend to contact Toshiba service partner in your country. The guarantee is valid and you should take it!

• Satellite A300 - screen doesn't work sometimes

  OK so first of all, I wish to begin by saying that I am a complete noob when it comes to computers and also my native language isn't English, but I'll try my best to make you understand my problem.

  Sometimes, when I try to turn on my laptop, the screen will not work. I hear the fan turns, the little lights on the keyboard light up, but the screen remains black... what happened for like 3 days until today, I came home and it worked magically. It is this same as there is a month... What is happening? : s

  On this virtual path, it is not easy to offer the exact diagnosis.
  What we do here is nothing else possible speculations about the reasons.

  A300 is not the most recent model, so there may be a problem with the connection between the motherboard and the display.
  Next time when this happens, try to move the screen or gently press the laptop under the screen just to see if this will help or not.

  In the end, I must say that single service can help you with this. With other words, they can disassemble the laptop and check the display cable.

• Now 23-d044 - installed MXM video card - HP Envy screen flashes red green blue black

  Hello

  I'm a 23-d044 I wanted to do the update/install video card instead of using the integrated graphics card.  I tried two different cards, a nVidia GeForce GT 540 m 2 GB and a part of HP AMD card #707804-002.  In each case the applied heat sink was part HP #694456-001. In each case, whenever I go back to the PC and it works, the screen flashes red, green, blue, black, white to infinity. I have read these and other forums indicating that this is a fault with the GPU, but I find that is unlikely given that I tried two different cards. I thought that maybe the MXM connection on the motherboard, but on the original motherboard power connector was defective, I have since replaced the motherboard (about 2 weeks ago) with the same part number. I downloaded both the AMD and nVidia drivers the most recent for each card (while running the integrated graphics card), but not joy.  Anyone have any ideas?  Thanks in advance for the help!

  Sean

  Sean, I had the same problem too.  I finally thought to it.  Just above where the grafics card go is two connectors and one of them has a plug in there.  above the connectors, said uma_lvds, the other says MXM_LVDS.  Swap the power cord of the uma_lvds to the mxm_lvds.  This will fix the problem and you will be running.

• Several games limit left 2/3 of the screen and only game in black and white

  Original title - problem with games

  Five of the eight games on my machine here confined to the left 2/3 of the screen and play only in black and white. It's Chess Titan,

  Free Cell, hearts and Spider Solitaire, solitaire. Ink ball, Mahjong-Titals and Minesweeper work very well. I had the same problem with Netflix, but

  acting on the advice of the Csr Support, I have ununstalled and re-installed Silverlight (and had to use the Fix It program to do it). That solved the problem of Netflix

  but not the problem of games. YouTube has never been touched by this issue)

  Note: these problems two weeks ago.

  Microsoft says my video driver customer service must be updated and that I had to go so the manufacturer (Dell). I can't

  implement this driver in programs and features at all.  I don't know what made everything a video driver. It only concerns the functioning of

  (some) games?

  Any suggestions or info appreciated

  Ed Mac

  Thanks for your reply. I tried to uninstall the games, but the Turn Off function did not cooperate.

  I had the problem, however. An outfit with whom I unfortunately chose to do it remotely

  maintenance, but who are if anything more incompetent than the people of Dell installed on my machine one

  program called "Assistant pilot."  Now, it turns out I had two issues which has the same effect on Netflix and 5 of 8 games, i.e. the image limited to 2/3 of the screen and exploitation of black and white only. The Netflix problem solved when Microsoft Csr Serv me sent suggestions on what to do, which was to uninstall and reinstall Microsoft Silverlight and use the Fix It program if there were problems. Now the outfit I mentioned tried time and time again to uninstall Silverlight without success. It appears that they knew no more difficulty I did. Silverlight was the problem here, because they felt properly.

  The problem of games persisted. Microsoft Csr Serv now told me she looked like my update video driver required and suggested I have call the manufacturer, Dell. God forbid!    I know little about computers. they know less. Then I shortened myself of this pilot, a wizard who bethought

  appears on my menu. I ran the program and it came with 20 + drivers requiring an update. One was a NVIDIA driver and I was vaguely aware that they probably had something to do with it.

  Update Ran, problem solved! Note that people who have installed this program to me do not have

  Consider using it to try to solve what was obviously a video problem! Yikes!

  Microsoft stands out as the good guys here. I had spent hours on the phone with Netflix (very useful, but it wasn't their problem) and this other suit. Microsoft pointed me in the right direction without fees.

• HPStream x 360 ConvertiblePC 11: touch screen does not work after update of Windows 10

  I updated my computer to Windows 10 but the touch screen no longer works. I've updated the drivers, but there has been no change. Any suggestions?

  Amazing! Problem solved!

  I heard there was a reset function in Windows 10 but I really didn't think he would do anything. The touch screen did not work when I originally did a new install of Windows 10 so why would it now? But he did. My touch screen works well and even better, he deleted loads of disk space.

  To simply type "reset" in the search and recovery option returns to the update & security. 'Start' this PC with Reset and select this option to remove all. After about an hour or two, my computer was fully functional. The downside was having to reinstall applications and files, but is not a major concern.

  Result!

• mode full screen does not work when playing games, recently ive changed my os from vista to windows 7... Please help me

  Im having dell inspiron 1545 graphics Mobile Intel (r) express chipset family... I changed my os from vista to windows 7 32 bit... after the mode full screen does not work just playing games... a black bar is the view of both sides of the window... can help a whole... ???

  Hello

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Download the latest driver adapter disaplay from the manufacturer's website, install on your computer and check the status of the issue.

  Inspiron 1545

  http://www.Dell.com/support/drivers/us/en/19/product/Inspiron-1545

• My touch screen does not work.

  My touch screen does not work. Sometimes, and other times I have to reboot. I restored my phone, but it still has the same problem. Any suggestions?

  The following information is taken from the HT201406 of the Apple KB article:

  If the screen of your iPhone, iPad or iPod touch does not respond to touch

  If your touch screen responds slowly, inconsistently, or not responding at all, follow these steps.

  Check your touch screen

  Make sure your hands are clean and dry, then try the following steps:

  1. If you have a case or a protective screen on your device, try removing it.
  2. Clean the screen with a soft, slightly damp, lint cloth.
  3. Unplug your unit.
  4. Restart your device. If you are unable to restart it, you can force restart your device.

  If your touch screen is still unresponsive as it should, contact the Support technique Apple or make your tablet in an Apple Store or Apple authorized service provider.

  Adjust your settings for tactile 3D

  If you have an iPhone 6s or later that does not properly respond to tactile 3D press, you can adjust the settings:

  1. Go to settings > general.
  2. Click Accessibility > Touch 3D.
  3. Then set the sensitivity of the setting.

  Get more help

  • Find out what to do if your screen does not turn.
  • If your screen is cracked or broken, implemented the repair service for your iPhone or iPad.