Screen flashing on Satellite U series

Hello

I have a Toshiba laptop with a weird problem.
The screen flashes if I remove the battery, it stops.

I put a new battery but same problem.

Can help?

What devices you have connected to the laptop? External monitor? USB devices?

There may be a ground loop or something.

Tags: Toshiba

Similar Questions

  • Screen flashing in Satellite L500D

    Welcome!

    I have a laptop Toshiba L500D. For about two weeks, something is happening with my laptop. Laptop is turned on and when I open the lid, or closed, the screen flashes, change colors, you can see the different bands in black and white or in color, usually the screen is distorted.

    This happens when the cover is at an angle from 0 to 90 degrees, when there is more than 90 degrees, then it is not the case.

    Probably something not going under the screen of the laptop on the hinges. Only way out is a service?

    It is a film in which this problem is presented.
    http://www.YouTube.com/watch?v=LyxhfiZtKak

    Please answer

    Hello

    Yes, I agree with you that there may be a problem with the connection.
    But it of not possible to say exactly what's wrong.
    It may be something wrong with the sensor that turns the backlight on and off, or maybe something wrong with one cable

    There is no other choice for that pick up if the guarantee is available (it should be valid 2 years long if the laptop has been saved) then should be set the laptop for free.

    Good luck

  • LCD screen flashes on Satellite 2450

    my laptop model is satellite 2450...
    recently, my lcd screen is now flashing...
    yesterday it worse... Keep flashing up and down very seriously...
    around a few minutes later... the screen is done... but without the backlight everything barely be seen now because of the conditions without backlight...

    Wat kind of problem, it's...?
    all I can do about it?

    If I send to repair... how much will it cost? or rather I just buy an external lcd to plug?

    Hello

    Of course there is a hardware malfunction. The best way to know what may be the problem is to contact the Service of your country partner. In my opinion, it may be some problem with FL inverter and it must be changed.

    As I said contact Service partner. You can find one under section http://eu.computers.toshiba-europe.com support & downloads.

  • White screen starts with Satellite P series

    Hello

    My computer starts normally when I turn it on but the screen is black. I have re - start several times to have the screen on.

    What's wrong?

    WIndows 7 64 bit

    Right on this virtual path is not easy to say what the problem is here.
    Since when did you notice this?

    Have you installed any updates or anything that may be responsible for this?
    When you say that the screen is black it means that the screen is black but the background light work or the screen is totally black as when laptop is turned OFF?

  • Satellite M300 - screen flashes white

    Toshiba Satellite M300 on 18 months old (using Windows 7). Display has had intermittent problems. Screen flashes to a white screen. Now if the lid is moved while he was working, "white" screen completely and returns to normal when returned to 'the sweet spot '!

    Have not yet tried another monitor. Driver is up-to-date. Assuming that maybe it's a "bad connection". Use turned off with the closure of the lid that changed tonight.

    Any ideas? :)

    Hi KezRev,

    Theoretically, it could be a problem of connecting cable or internal problem display but you should test another monitor first. Just connect an external monitor to check the image here.

    If the external monitor works properly it s the LCD cable internal or visualize a malfunction. So, contact a service provider and allow technicians to check your laptop. They can fix this problem and order new parts. :)

  • Why do Satellite A100 screen flashes when turned off?

    Hello
    I have a toshiba A100, Go 7600 Gpu, just bought there is two weeks and im very pleased with the quality and performance far :), just noticed one thing today, the room was turned off and the laptop turns off with the screen in open position, I leave it open normally when at home, I noticed that the screen flashes as fixed every 1 min in what appears to be an interval of time with or without AC connected, not a flash very bright but not easy to notice, but I'm sure the flash, so my question is should I worry about this? Thanks in advance :)

    Hello

    What do you mean with the screen? The LCD internal? Maybe you didn t stop the machine itself.

    I also suggest you update your bios and your drivers, maybe it s just a software related issue...

    Here´s a link to find the bios and latest drivers for your computer:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    Give some information about this case, could be interesting, what problem is.

    See you soon

  • Satellite L100 series starts the error message

    I have a Satellite L100 series PC laptop I've had for a few years now and he's got a problem. When I boot it it goes as far as the windows loading screen then flashes blue for a mili second then restarts. I try to start safe mode, and it produces a long list that has the following text:

    Multi (0) Disk (0) rdisk (0) partition drivers then sys various titles of files. After that it appears for a minute or two then restarts again.

    I searched the web to find what is the problem and the general answer that I can find is that the hard drive is faulty. I also found that the BONE may need to reinstall I try first before buying a new hard drive.

    My question is this:

    Can anyone confirm that this is the hard drive which is a failure?
    If Yes, is this the right hard drive for the L100 series laptop PC: http://www.ebuyer.com/product/145130

    Any help is very appreciated.

    Thank you very much

    Hello!

    Yes, it could be that the HARD drive is faulty.
    So I would check this with a special tool.

    http://www.HitachiGST.com/HDD/support/download.htm#DFT
    With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. Then you can test the HARD drive.
    On the same site is a user's guide if you want to know more.

    Good bye

  • Replacing the screen on the Satellite C660-2EH

    Hi, I'm looking for a replacement screen for my Satellite C660-2EH and I can't find a specific model. I could buy the generic screen come to label C660? In some I found, for example:

    http://www.laptop-power.co.UK/laptop-screens/Toshiba-compatible/satellite/series-C660/model-C660.html

    http://www.laptopscreenonline.com/Toshiba-Satellite-C660-replacement-screen-laptop-LCD-15982-p.asp

    Would appreciate any help that someone could give me on this matter, thank you!
    Zoe.

    In my view the two links are OK, and you can't do anything wrong. AFAIK all C660 models use the same LCD display with following specifications:

    Display Type - color display TFT LCD
    Size (diagonal) - 15.6 "(HD)
    Resolution - 1366 x 768
    -16:9 aspect ratio
    Type of LED lighting - light side.

    Only the difference can be a salesman or the brightness to level 8.

    When you order this use being it's HD LED screen.

    By the way: you want to exchange it only? I mean it's not so easy and if you don t have any experience with this kind of things that you should ask for help.

    Be careful about this.

  • Re: My Satellite M series gets hot

    My satellite M series laptop gets very hot today.
    After a while, the screen turns white due to overheating.

    Help, please.

    Hello

    Clean fans and cooling grids in the past?
    If this is not the case, this!

    Eventually the cooling grids are obstructed by dust and debris and that prevent air circulation
    I removed the dust using a jet of compressed air that is the best workaround.
    .

  • Screen flashing after migration to Windows 10

    Hello
    The screen flashes and I can't do any action except (CTRL + ALT + DELETE) just after the migration of Windows 10 on my laptop Satellite L855 17V.
    Help, please.

    Kind regards.

    Laurent

    Hi Laurent

    Did you get all the answers. I am new to this and have just turned on my Toshiba Satellite C55 still work on windows 8.1 and the screen goes ballistic. After that signature in the display starts to Flash and the only thing I can do is CTRL + ALT + DELETE. I wonder if its something to do with 25 downloads of Microsoft?
    If anyone can help please notify

  • Gray screen flashes a file with? and a file with an icon.

    Gray screen flashes a file with? and a file with an icon.

    Click here and follow the instructions. If you get to the third series of steps, insert a Mac OS X installation disc.


    (136937)

  • Screen flashes while taking pictures using the Auto flash and front camera on

    Device: iPhone 7 more

    iOS: 10.0.2

    Question: Screen flashes with blank white light while taking the photo using a front camera with the flash light on which is so annoying

    Note:

    After taking the photo, the photo is visible and doesn't have any problem

    I could be wrong, but I think that this is how flash works for the front facing camera.

  • iMac screen flashes black in Photoshop CC

    Hello

    I am posting this as well in CC Adobe and Apple forums as I do not know where the problem lies, but I would really appreciate this problem:

    I use Adobe apps on an iMac CC brand new (still in time to get the full refund). If you use Photoshop CC (2015.5) the entire screen (not only the Photoshop window) goes black for about half a second when any icon tool exceeding a certain size of pixel passes of the tool to the pointer icon icon or vice versa.

    This happens for example when the icon of the fate of the area of the image on the menus or the dashboard or window, or when it comes in and out of the right click menu change brush size. Any situation when running the tool pointer or pointer tool. It does not always happen, but it happens most of the time, maybe the type of pointer movement has something to do with it, well it happens with fast or slow transitions.

    The problem only occurs when the brush is superior to certain dimensions - never when it is less than the critical size. The critical size may vary depending on whether the Photoshop was opened for a while or just launched (I don't know too much about). There is also an interaction with the hardness of the tool.

    Thus, for example:

    On the blur to 0% hardness tool, the screen flashes black when will top 80 pixels-never less than size. 100% hardness, it flashes from 64 pixels. Same for the Brush tool, Eraser, etc. I think it happens with any appreciable tool (don't have not tried them all).

    I use a Wacom Intuos PS and the Magic Mouse from Apple. The problem occurs at the same time if they are both connected together or separately.

    The problem occurs even when Photoshop is the only application running.

    Please help, because it is almost unusable now.

    Specifications of the computer:

    iMac, retina 4 k, 21, 5-inch

    Processor: Intel Core i5 to 3.1 GHz

    Memory: 8 GB 1867 MHz DDR3

    Graphics card: Intel Pro Iris Graphics 6200 1536 MB

    The Photoshop memory usage is set to default values:

    4500MB (70% of available memory)

    4 levels of cache

    Tile size 1024K cache

    I just downloaded and tried the oldest version of Photoshop - CS6 - available through my driver's license and the problem is exactly the same, this is not limited to a particular version of the CC in Photoshop.

  • 2008 mac book pro screen flashing folder with question mark at startup

    2008 mac book pro screen flashing folder with question mark replaced boot hard drive and cable, continues to do the same.  any ideas to fix?

    Start your Mac by holding down the button Option. The should launch the window of Boot Manager where you can select the startup disk, and then click on restart.

    How to choose a boot on your Mac - Apple Support drive

  • Hi, my screen flashes during playback of movies from Netflix

    Hi, my screen flashes during playback of movies from Netflix. It happens with other applications or when I play DVD. It begins in about 5 seconds in movies and it happens about every 4-5 seconds. The screen turns white for about a second, then it shows some horizontal lines, and it goes back to normal. And after a few seconds, he begins anew. I also noticed it always happen when I move my mouse during playback of a movie at Netflix.

    My PC is HP Pavilion 17 inch. I3 Haswel processor and Intel graphics card built-in. 8.1 to win

    I've updated all the drivers, but nothing helped.

    Any suggestions?

    Thank you

    Dmitry

    Figured out. Change refresh rate of 60 Hz 40 Hz p p and it solved the problem.

    BTW, HP helpdesk is completely useless... He does not call them – at least their 'free' in India support is completely incompetent.

Maybe you are looking for

  • Control LCD screen flashes on and outside

    HelloI have a 6 yr old HP w15e LCD monitor, it is quite old. But recently, it's showing strange things. Whenever I turn on the power to the monitor with or without the CPU video input, continuous screen blinking on and outside (I think there are two

  • HP Elite m9150f - signal VGA No.

    Member of the family has a HP Elite m9150f with motherboard chipset Intel G33 Asus IPIBL-LB, vidio integrated Nvidia 8500 GT and HP W1907 LCD Monitor processor.  The monitor has always been connec ted to the PC DVI port via the VGA - DVI adapter.  Re

  • Phonebook of Bluetooth downloads

    I sent this question to support as well so if I get a response from them, I will post it here. I have a 2011 Hyundai Sonata with the connectiivity of the standard bluetooth for phones. I just brought the Bravo today as an Update/replacement for my HT

  • HP Pavilion won't start

    How to fix my computer hp Pavilion laptop? I clicked the button refresh settings, I was afraid of losing my files so I turned it off when updating. And now it won't start.  I tried pressing f10 but I don't know what to do. Can you help me?

  • Two indicators for the same graph.

    How to connect the same indicators for the chart even if you have it in different tabs?