screen garbage Apple IIe

Similar Questions

• Several (TV) screens with Apple TV

  I use Apple TV AirPlay on a desk, TV for presentations (works fine), I can add a second TV screen if I use a HDMI HUB connected to Apple TV to view the same presentation on two screens at the same time?

  Thank you

  Jim

  Maybe, (more so cheap) hdmi dispatchers often don't work well with hdcp https://en.wikipedia.org/wiki/High-bandwidth_Digital_Content_Protection

• MacBook screen on Apple TV

  Hello

  I'm trying to put my Macbook Pro screen on my HD TV via my Apple TV box 4th generation. My Macbook Pro is a Mid 2010 and runs the latest version of the software and the update.

  I searched Apple's site and I do not know I followed what he say. I have not in my menu bar option of airtime.

  Has anyone had this problem and found a solution.

  Thanks in advance

  Carl

  Are you sure that your MacBook Pro meets the requirements of the Airplay? It seems that they are not...

  To view a video from your Mac to a TV high definition - Support Apple AirPlay

• AppleTV stuck on the screen with apple - I restart, held buttons...

  When I start my AppleTV he is stuck on a white screen with the Apple and black background (I can't move a plus). The light on the AppleTV has a regular blinking. 2nd generation (black with silver remotely).

  I tried unplug, wait a few seconds and plug it back

  I tried to hold the menu drop down and hold until the light on the AppleTV flashes very fast and

  Same result in both cases - stuck on the black screen with the white apple logo.

  Start here: get help with audio, video or power on Apple TV - Apple Support.

  TT2

• LCD screen with apple tv

  Hello

  the apple TV does support streaming with the LCD? or support the smart TV?

  Yes, the Apple TV should work with most modern LCD screens!

  I hope this helps!

  Jonty

• Grey screen with Apple little only... Cannot use my Mac... What should I do?

  WWhen I tearn on my mac

  IMIST show only the gray screen and it shows like its something but is downloding stay like that forever and does not work!

  Stop and then start holding command-r key in Recovery Mode. Then choose disk utility > first aid or disk utility > ERD if less bone 10.11. Let us know the results.

• Screen logo apple on my 4th gen iPod touch continues to Flash slowly with a black screen (as if it is off) between the two, what do I do?

  I ' v had for several years now and has tried to update in October, then the question is problem, I don't know if it works more

  Try:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• EL CAPITAN - when in safari Apple toolbar is not visible

  I tried this and do not find any answer to El Capitan and NOT the FULLSCREEN MODE. When I open safari, NOT full-screen, the Apple toolbar is not visible (the one with wi - fi, Apple, file edit, history etc.). The only thing visible is the bar with red, yellow and green circles. If I click on the safari window in another program, it comes back.

  Most solutions speak to exit full screen, but I'm not in full screen - I have several open small windows (safari, word, etc.) which are all on the desktop at the same time.

  I spent hours looking for this. One solution was to repair permissions, but has no El Capitan - it is built in.

  If anyone has a solution for El Capitan, I would be very grateful.

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in the Preferenes system, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the United Nations to the Installer application or instructions to uninstall using the developer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

  If it works in safe mode, try to run this program when it is started normally, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• Impossible to use Mac because of boxes appearing – 'com.apple.iCloudHelper.xpc', 'cloudd', 'MessagesAgent', 'represents' with spinning ball

  My MacBook Pro El Capitan has boxes on screen-"com.apple.iCloudHelper.xpc", "cloudd", "MessagesAgent", "accountsd" with the ball spinning and I can't use my computer as these boxes want a 'keyring', and I don't recognize any of this. Help, please. Thank you.

  Hello T.W. Macaroni.

  Welcome to the communities of Apple Support!  Looks like you are having problems connecting to your computer administrator user account.  (A 'Keychain' is a password management system).  Have you recently made changes to your computer (update your operating system, download any software, no password)?  The files above to indicate your computer tries to launch applications like iCloud, Messages, etc.

  The first thing I would say is to restart your computer.  It sounds simple, but it can be a very easy solution.  If this does not work, restart your computer again, but this time hold down the SHIFT key.  It's what we call a safe mode.   If your computer starts in safe mode without these error messages, then restart again in normal mode (without pressing any key).

  Try safe mode if your Mac does not end commissioning

  If none of these two basic troubleshooting steps work, you may need to enter a new password of your login keychain.  Follow the steps in the resource below:

  If your Mac keeps asking for the password in the keychain
  

  After you or your administrator Mac resets the password of your OS X user account, your Mac may ask you to update your Keychain password or enter your login Keychain password. He could also tell you the system was unable to unlock your login keychain. It's because your login keychain still use your old password.

  If you do not know your old password, the solution is to create a new login keychain.

  If you know your old password, use this password to update your existing connection Keyring:

  1. Open the Keychain Access application, located in the Utilities folder of the Applications folder.
  2. On the Edit menu, choose "Change password for Keychain 'login'."
  3. Enter the old password of your user account in the current password field. This is the password you were using until the password has been reset.
  4. Enter the new password for your user account password. This is the password that you are using now to connect to your Mac. Enter the same password in the field of verification.
  5. Click OK when finished, then quit Keychain Access.

  T.W. Macaroni, if you continue to have problems connecting to your computer, please reply to this message and we will study further with you.

  Take care.

• How do I restore my Apple TV without cable USB - C?

  When I start my Apple TV, it shows only one link on my TV screen: support.apple.com/appletv/restore. I went on this website and it explains how to restore an Apple TV using a USB - C cable connected to a computer. But I did not... Is there another way to restore my Apple TV to make it functional again?

  If your device is working correctly, you would be able to restore it using one of the options in the settings menu (restore your Apple TV to its factory - Apple Support settings) but it is the screen, which will leave no navigate you the menus at all, then you will need to restore through iTunes. A USB A-C cable is not that expensive. Otherwise, you may make an appointment at an Apple Store Genius Bar or with an Apple Certified Support Provider and have them reset it for you. See restore your Apple TV via iTunes - Apple Support.

  TT2

• Apple 4th TV showing a larger image that will not fit my TV.

  It seems like I'm losing part of the image produced by the ATV. When I go into the settings, I don't see the maximum area showed on the screen. Apple suggests that I have to do the configuration on my TV, but my TV is an old LG TV, model 47LY3RF and has the option of 16:9, 4:3, zoom 1/2, option 1:1 is not accessible. It is not possible too change the size of the screen on this subject.
  I already tried without success to other options of resolution on the ATV.
  Does anyone have an idea how to fix?
  Thank you!

  This is due to "Overscan". Unless your TV has an option to change the zoom, you're out of luck.

  I'm in the same boat and think that Apple could fix this with a parameter of Apple TV. I have a zoom setting with my old LG TV but it only zooms to 100% no less.

  If you have any suggestions that you think might improve Apple TV you can send your feedback here at Apple

  To be quite honest, arguably isn't really matter of Apple. There are safety standard for video production areas, if the developers of applications actually apply these standards you will probably notice even the overscan at all.

• Desktop iMac froze value apple logo and white bar after restarting

  MY iMac just updated to El capitan did not so I restarted. Now all I have is a black screen, the Apple logo and the white bar

  Help

  I was able to fix most of the problems with the help of the community, but I don't really have any COMPUTER knowledge at all the

  Thank you

  hazel170 wrote:

  MY iMac just updated to El capitan did not so I restarted. Now all I have is a black screen, the Apple logo and the white bar

  Help

  I was able to fix most of the problems with the help of the community, but I don't really have any COMPUTER knowledge at all the

  Thank you

  Your system may have done something after the update.  It was just after the installation?

  -J' noticed when I did a check of the complete material on my system that time was incorrect (quoted in 30 minutes - took 90 minutes) and that most of the time the activity bar wasn't moving - then gave the impression he was frozen.

  Have your support I have tried calling Apple or set up a call from them - their updates are not transparent to the users - and what I've read here seem to require an IT professional to deal with.

• 15 "MacBook Pro early 2011 screen and use failure, horizontal lines, edges off the coast of the center of the screen

  Hi there-

  recently worked when all of a sudden my screen turned to a variety of 'snow '. After about 2 seconds, he stopped, but the screen was seriously messed up. Horizontal lines apart a few millimeters, but the lines look as if they were moving a little. In addition, the edge of the screen is now near the Center, rather than on the edge of the physical screen. So, there is a black bar halfway in the screen which cut into 2.

  It froze the computer as well, if I pressed the power to restart. It loaded very well through the screen of apple, but as soon as he hit the login screen, he returned to no usable lines. Cannot get back in.

  Anyone that prior experience, or know what I can do to get out of trouble? Looks different from most other 'horizontal' issues I found in searching.

  Photo attached.

  Thanks and best,

  Curt

  

  

  See MacBook Pro 2011 for graphics problems repair Extension program.

• iMac grey screen, no easy fix yet...  Help, please!

  Hello

  My iMac froze everything by making his first Time Machine backup.  I force quit the machine (press and hold the power), and when it is restarted, it went straight to the gray screen - no apple, no cursor, nothing.  Every time when the computer reboots, the same phenomenon occurs.

  (End of 2011 iMac, most recent el Cap OS)

  I did some research and tried all of the recommended steps, but no luck yet

  (eg. all the steps for this thread https://discussions.apple.com/thread/7408375),

  Inc., resets the security, Recovery Mode, target, MSC Mode and NVRAM Mode.  & also using original OS installation DVD

  The current boot drive is a secondary market of SSD.

  The iMac has a second bootable hard drive inside (original, but moved to different 'port' (the correct term?))

  I have a disk external drive bootable with SSD cloned

  and the original OS installation disc.

  I use the mouse & keyboard USB.

  I'm not able to get the machine at the start of one of the mentioned drives, nor since the installation of the OS DVD.  Or boot disk target.

  Advice for:

  • Get the SSD to start
  • Get the HD to boot
  • Get the DVD of the OS at startup
    
  • Get the iMac to start as a disk target
  • 2nd question: Time Machine is about 1/3 to do elsewhere.  I have this external hard drive connected to my MB, but when I try to open the backup, get the message "there are no ready application to open the document...". ».
  • How can I access the files in the Time Machine HD?

  OR,  Do I have to disassemble the machine at this point?

  • If so, remove the SSD & plug the HD in this port?
  • There is some data on the boot SSD that I would return if possible.
    • Best way to do it?

  Thank you in advance!

  --

  < personal information under the direction of the host >

  It looks like a hardware problem. Make an Apple Store for a free evaluation.

• Big screen for the new Mac Pro

  Looking to buy a new Mac Pro.  I like to work while sitting on the couch with my feet supported, but a laptop is not very good for usability, and my neck has had enough.  So, I think trying to upgrade a number of things and to combine the entertainment center with work stations, so I can do both comfortably from my couch.  Ideally I would love it if Apple made a gigantic Retina display, but as they do not have, my current theory includes a 48 "-52" class 4 K HDTV connected to a surround sound via HDMI system, which hangs in turn a blu - Ray player and a Mac Pro via HDMI.

  If someone has done something similar?  I'm assuming that, unlike the old flat screen TV model at work sometimes I mirror my iPad on, a 4 K Pixelize text.  Is this correct?  Or should I still the same problem?  As far as the projectors are a pain, which is the only really good solution here?  Any other question, I would need to know that displays the parameters or incompatibilities if I went with the 4 K HDTV?

  May be useful to take a look at http://www.macrumors.com/guide/4k-5k-displays-buyers-guide-mac/ which covers the 4 K screen with Apple hardware support pretty well.

  You will encounter one of the limits is the HDMI output on the current Mac Pro supports only 4K at 30 Hz not full 60 Hz, which we are used to on most screens. You can watch a form of Thunderbolt to the HDMI connection for display to work properly at 60 Hz.