Screen goes black after the log on screen and works fine in safe mode.

Similar Questions

• Monitor goes black, but only if Vista closed system (works fine with Linux!)

  My Vista system works AOK except the monitor displays no more than 2-3 seconds. However, it is on with a fixed green light and if I turn the monitor on and off I have the chance to see my login screen of Vista or office for 2-3 seconds. Then black again.

  BUT, if I first start a live distribution of Linux on a USB key and to allow Linux to shut down the system, I can start then in Vista without difficulty and the screen stays on for the duration of the session. If I reboot with Vista or go out with Vista, I lose again the screen until I use Linux. It's driving me crazy!

  This has happened for about three weeks now. All updates applied. PowerSave off (as it has also causes loss of monitor). Vista just on board: not a dual-boot configuration. I only use Linux live via USB in order to access Vista with a display of work!

  Any suggestions? (NB: I can't use System Restore as it is turned off.) (DOH!)

  Hi TranquilPC,

  There is a possibility that this would happen because of problem with the video card on the computer.

  Check to see if you can boot to the desktop using video in low resolution (640 × 480) Enable"startup option.

  (a) click the Start button, click the arrow next to Shut Down, and then click restart.

  (b) do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  (c) on the screen Advanced Startup Options , use the arrow keys to select tActivate video low resolution (640 × 480)and press ENTER.

  (d) log in your computer with a user account with administrator rights.

  If you can see your desktop, there is problem with your video card on the computer

  I suggest that you manually download and install the updated drivers for the video card by visiting the manufacturer of the card and check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP ProBook s 4540: the screen goes black after the mode "Eve"

  Hello!

  My computer works fine but there is a problem, when I do not use it for a few hours or maybe an hour my screen goes black and it is nothing to do, but closed and then turn it back on.

  I have disabled all parameters almostly, screenshots here:

  #1- http://i.imgur.com/zelMPLD.png

  #2- http://i.imgur.com/FJNyLzi.png

  I don't know what to do, I think it goes to sleep after a certain time and then he don't wake up, I need to remove the battery and then turn again, he started arrive about 2 days ago when I updated my radeon HD7650 to 15.11.1 Crimson video card driver or sth.

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, close all open windows, and then restart the laptop.

  Kind regards

  DP - K

• Acer S241HL screen goes black after the release of the games, reboot the pc.

  Whenever I go out or alt + esc out a game, the screen goes black, but his continued to play, it forces me to restart the pc. the thing is, it didn't happen until I bought my new monitor, my old monitor is an HP w2207h and my new monitor is an Acer S241HL Cbid. I don't think there is anything wrong with my pc, because it didn't happen with my old monitor.

  This happens only to some games well. (Counter Strike: Global Offensive and crew)

  Any help would be appreciated strongy.

  I FOUND THE FIX.

  This is a really weird problem, I had tried before but this time he just decide to work. I plugged the HDMI cable between the pc and return to the pc when I got a black screen. Surprisingly it worked, as I had already tried before. I tried several times now and it works.

• Screen goes black after the connection to the laptop.

  The login screen appears and I can connect.  Then it takes a long time for the computer to think, but it never goes to my office.  The screen goes black.  I did Control + Alt + Delete to close and turn off the computer.  It's a laptop and I had trouble with the electrical cord were staying not 'on '.  I don't do social networks, or open unsolited E mails.  Is there a function key which will solve this problem?

  {t is a laptop and I had trouble with the electrical cord were staying not 'on'.}

  The above should explain more on your part.

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Screen goes black after the screen "Welcome"... Help, please.

  My laptop is a Pavilion Dv6-6118nr.

  Whenever I start my laptop itll seem like if its normal startup, then the home screen it's just becomes completely black when it should now display my desktop. With it being bllack, I can still see my cursor, but it is not Flash or anything. I performed some diagnostic tests and even restored back to an early date to see if itd work. Any previous question I have ever encountered with my computer laptop ive always fixed, but this one has really left me speechless. The only reason imon internet is now because I started it in safe mode with network. I know that this has nothing to do wiith my screen or LED bc im of course using the internet today.

  P.S My battery is messed up so that it displays a message when I start that ive been aware of & get a new one this week. Sometimes when the battery becomes hot, I'm going out while that its plugged in until it cools. I don't know if this is a problem that is frequent or not w HP its but if someone saw as what it probably could be, very forced itd. Thanks in advance.

  * Windows 7 64 bit

  * HP Pavilion Dv6-6118nr

  *

  As your screen works in safe mode it tells me this is a diplay setting that is conflicting with the hardware.

  Start in safe mode and do a right-click on computer and select manage.

  Invite through permissions. Once the loads from the console:

  Now, in the left pane, click Device Manager.

  Find the setting for the graphics card.

  Right-click on your graphics card and select uninstall device.

  Restart machine and Windows will reinstall your graphics card with the default settings.

  You may need to adjust your resolution to your tastes.

  Then try to find out what kind of program has caused the problem initially.

  Hope this helps you.

• Wrong turn on 14 months old laptop, screen goes black after the windows icon.

  If we make a wrong stop down, it works in safe mode? Found information on a forum about how to get to the main screen, battery cable, press 'on' for 30 seconds, then cable back in and turn, but its success and Miss, and when we get we can not restore to a previous restore point. ideas to please because I am not very good with technology. Web site toshiba tried today as is the brand, but he asked the serial number and cannot recognize it, then smolt he could detect the laptop online, but the page does not, do not know what to do or where to look next. Thank you

  Thank you for having prepared the answer of the indepth network.

  His computer has been allowing us to start in safe mode, so I knew that this was not a screen problem. I tried to follow the link microsoft to start in a clean boot, as I had never heard of this before, but I could find it only for windows xp not windows 7. really, I'm not technical and was at my wits end, failed twice to restore because it says cannot restore because he could not get rid of a file called nativeimages _ windows livewriter?

  As a last resort, and something I should have done in the first place, I deleted everything that my daughter had downloaded to play music and watch TV on since the beginning of the new year so that it worked very well. some of the applications must have been with it downloaded that she had never heard of them before things happen.

  Once we had all these off (except upgrades) the laptop started immediately.

  Still thank you for your time, I was ready to go into a computer store for repair, but your encouragement to try to fix that made me determined to do. very grateful

• Desktop Windows 7 goes black after a period of inactivity and the user accesses their machine again

  Hello

  Wonder if anyone can offer help for an unusual problem?

  Users have Windows 7 machines that all have a background theme to display... Blue with a company Logo.

  User's for lunch and leave their posts after a period of time and/or powersaver screensaver comes in... all normal at this stage.

  After an hour, they return to their machine and they move the mouse/tap a key and bring the machine back (excuse my terminology :)) and the office went from the default theme for a black desktop computer... Icons/Applications behave very well.

  The temporary workaround is:

  1. open a session and on windows to restore the office back to normal.

  or...

  2. I do a restart of the "Desktop window Manager Session Manager" service that puts the office back to normal as well.

  Has anyone seen cela and worked a way how to make a permanent fix... have struggled on Google because the answers I find are around the screen savers that ISN'T the problem.

  See you soon,.

  Steve

  Hi Steve,.

  Thank you for the update. However, since these computers are connected to the domain, your question is beyond the scope of what is generally answered in this forum of consumer and would be better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Forums.

• TV connected via the VGA input to HDMI don't get no signal after preparing the Windows message, works fine in safe mode

  Original title: PC to tv connection / VGA to HDMI

  Hello
  I hope someone out there can help. I recently bought a new samsung TV after that my old one failed. My new TV doesn't have a RGB port to connect a VGA cable to so I can use my PC as my old one done, it has HDMI and my PC only output VGA. I bought a VGA Converter HDMI to maplin and when I start my PC the image appears on my TV because it goes through its startup upward. It displays windows prepares, but then the Windows point would open normally, the signal on my TV dies and it does is display the message no signal on the screen. If I start thr PC in safe mode, windows starts very well and the signal does not go down. I use windows 7. Someone knows how to fix?
  Thank you

  It is possible that your computer is trying to send a resolution & frequency to which the TV cannot manage.  I suspect that this is because the image is displayed when starting, but then disappears when Windows takes control - until Windows takes over, the resolution sent will be below.

  You should consult the manual of the TV to its specifications.  Mine, for example, just a a simple table of resolutions & combinations of vertical frequency it can handle.  Then look at the Control Panel, display, change display settings to see what your computer can produce and choose one that fits these two machines.  If the best resolution display settings don't work then go to the next best resolution [or in the setting of 640 x 480 to see which works best].

  Once configured, Windows will display the setting chosen at the television screen every time so you will not have to keep setting up for each session.

  Each time that you connect the TV you can use the Windows key + P key combination to toggle the display.

  I don't know if you want the TV an extended desktop or a single view.  You might find, as I did, that the TV can use a higher resolution output if it is the only view.  I suspect that this is a result of capacity of the computer's display adapter because it has less work to do if there is only one required both display.

  Once you put in place, you may find that control panel display settings, display, change, advanced has useful additional parameters, but you'd probably need to have a good guide to help with your graphics card make any sense of the options available.

  If that is not enough then I suggest that you try to find an online forum for your TV, hoping that someone has done what you are trying to do.

  Good luck

• After the reset of firefox when it crashed unless safe mode cannot use the google search engine

  I had to reset Firefox after it crashed it unless I tried in safe mode, turn it off hardware acceleration still crashes so reset. Lost all my favorites and history etc. and my google search bar does more actually my search bar does not work any search engine, I try and I can not synchronize either as I have an unknown error

  After a reset, you should find a folder of old data of Firefox on your desktop. If you do not, you can recover your bookmarks and other data from it. Is this what?

  On your question about your Google search bar, it's the Firefox search bar integrated with search engine selection to the bottom of the left side?

  Do these search boxes work:

  • Address bar (also known as URL bar)
  • Firefox homepage (if you use it)
  • Top of the new tab (if you use it)

• System Restore won't work, drives available: HP (C :) (Missing)?) Left click on the mouse also stops randomly works, works fine in safe mode.

  My computer is upward, slow-running and my mouse will just randomly stop left click. I can switch the service so click right not left click function, but then cannot do the right click function. I had created a restore point before installing a program called Cain and Abel on my computer and it was just a couple of days.

  When I tried to do a restore, I got a message saying I needed turn the system restore. Then my computer froze so I restarted it and selected "System Recovery" and tried to do a restore to the point that I had created before that Cain has been installed. I got a message saying that the restoration has failed then I restarted mode without failure. When I restarted in safe mode, both left and right click was working again but I got a message saying that something has been altered (I didn't write it down so you do not know what it was). He says to run CHKDSK, which I did and then the computer seemed to work again.

  This is temporary, I lost my left click again and now have swung it for do the right click, left click is supposed to do, but really need to be able to do both types of clicks.

  I go in to the restoration of the system, and it says I need to turn it on. When I go into system properties to turn on, the disc I want to activate to says "HP (C :) (Missing)) ' what this means and how do I do the restore point I have created 2 days ago from work?

  Hi kar fam.

  The question you posted seems to be hardware related. Unfortunately, we are unable to help with changes to the hardware. For more assistance, contact your computer manufacturer.

  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I configured the netgear wireless router and works fine but when I turn the computer power off and back on I can't get connection

  Hi can anyone help, I am with AOL, I just switched to the Platinum service, I configured my router netgear DG834G wireless and that's all works fine, but if I turn the computer then turn it back I cannot get a connection and when I ask her to fiind wireless networks the computer tells me that windows does not support my wireless network and I must have another program running , but I didn't so I have to reload the settings again for windows to set it up. What happens whenever I turn off the computer. AOL are without help please someone has any ideas - I use windows xp service pack 3

  Hi Timstimpson,

  It is possible that the Automatic Configuration Windows wireless service is not configured to run at startup.
  Try the following:
  1. click on Start and run
  2. type in the box to run services.msc
  3 scroll down and look for the Automatic Wireless Configuration service
  4. double-click on the service and make sure that the Startup Type is set to Automatic
  
  
  Let me know if it works for you!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The laptop monitor goes black after the external vga connection screen

  Hey,.

  I have a Qosmio G50 - 10H, Windows 7 32-bit. After connecting to an external monitor, the internal laptop display becomes almost black. It is possible to see some items on the screen, but it is dark gray to work on. It does not much adjustment of color or brightness (black to very dark grey). The main problem is when disconnecting the external monitor monitor internal still is dark gray and still does not have many adjustments. It's so dark on the adjustments of brigthest that it is impossible to work. I downloaded the latest version of the driver for the support, but still the same problem.

  Any suggestions?

  It is somewhat strange.
  You can switch between LCD and external monitor by using the FN + F5 key combination?
  If you can switch to the LCD only again everything OK?

• Screen goes black after the HP logo

  I have not received an answer back since yesterday morning and I really need help!

  I want to 2ce2502rs6 series dv6 product b6b49av. It starts with hp logo and goes to black screen. I tried to fix it before and it didn't work. I tried hard reboot and he came and I chose repair and it failed again, so I chose turn off and it now goes to the black screen.

  August 26
  Hello

  Once the unit is powered on keep pressing the F2 key, run diagnostics test and please let me know the result.

  It is said

  Processor check passed
  Audit quick memory passed
  Intelligent control of drive past
  Short hard drive DST check FAILED

  ID OU7ATA-6B877E-QFPK1A-60U503 failure
  Product iD b6b49av
  Hard drive 1

  Please let me know what I should do next.

  Thanks for your help! Beth

  If your hard drive has failed, so that your files may have already disappeared.

  You can put the drive in an external drive enclosure hard usb or a USB to sata connector allows you to connect the drive hard tro another PC to try to copy the files from the hard drive.

  You can order a usb at HP recovery disk. I can't identify your laptop with the b6b49av that you posted.

  See web document this HP if you do not know how to locate the product number or model number.

• Since last week, when I open a new window in my smartermail reduced the window, when I try to expand, it goes back to the small window. IE works fine.

  My company Director said he's received emails from other people in our society with the same problem recently.

  He says he believes it's a matter of Firefox since the last update.

  When I use IE, my smartermail works very well.

  Thank you

  Thanks for the test and I'm sorry to hear it didn't work.

  Could you try script blocking against the resizing windows? Here's how:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the dom and make a pause so that the list is filtered

  (3) double-click dom.disable_window_move_resize preference from false to true.

  If you test a different email to opening, it still resizes?